R 1250 GS (2022) - Motorcycle BMW - Free user manual and instructions

Product type	Motorcycle
Brand	BMW
Model	R 1250 GS (2022)
Dimensions (L x W x H)	2207 x 952 x 1430 mm
Seat height	850 mm (adjustable)
Curb weight	249 kg
Engine	4-stroke boxer twin, air/liquid-cooled
Displacement	1254 cm³
Maximum output	100 kW (136 hp) at 7750 rpm
Maximum torque	143 Nm at 6250 rpm
Fuel tank capacity	20 L (including 4 L reserve)
Transmission	6-speed gearbox, shaft drive secondary transmission
Front suspension	Upside-down telescopic fork
Rear suspension	Swing arm with Paralever, Dynamic ESA
Front brakes	Double floating disc, 305 mm, 4-piston calipers
Rear brakes	Single disc, 276 mm, 2-piston caliper
ABS	BMW Motorrad ABS Pro (integral, cornering)
Riding assistance	DTC, Hill Start Control, cruise control, intelligent emergency call
Lighting	Full LED, adaptive headlight (optional)
TFT display	6.5 inches, color, connected
Battery	12 V, 12 Ah
Maintenance	Engine oil change, air filter, spark plugs, brake fluid (according to BMW maintenance schedule)
Security	Anti-theft alarm (optional), electronic immobilizer EWS

Frequently Asked Questions - R 1250 GS (2022) BMW

How to start the BMW R 1250 GS (2022) ?

Insert the ignition key or use the Keyless Ride system. Turn the key or press the unlock button to switch on the ignition. Activate the cut-off switch, then press the start button (STOP/MODE). The engine starts after the Pre-Ride-Check.

How to adjust the Dynamic ESA suspension ?

Use the MENU rocker switch and the Multi-Controller on the left handlebar to access the 'My vehicle' menu. Select 'Dynamic ESA' and choose the mode (Road, Dynamic, Enduro). You can also adjust the rear spring preload manually via the knob on the frame.

What is the recommended tire pressure ?

Front tire: 2.5 bar, rear tire: 2.9 bar (cold). Check the label under the seat or the owner's manual for special conditions (loaded, off-road).

How to change the riding modes ?

Press the 'MODE' button on the right handlebar. The TFT display shows the available modes (Rain, Road, Dynamic, Enduro, Enduro Pro). Turn the knob or use the arrows to select the desired mode and confirm.

How to activate the Hill Start Control ?

On a slope, squeeze the front or rear brake. Briefly press the Hill Start Control button (on the left handlebar) or activate it via the menu. Release the brake: the motorcycle remains stationary for 2-3 seconds. Accelerate to start.

What are the main maintenance intervals ?

The BMW Motorrad maintenance schedule provides a service every 10,000 km or once a year. Includes engine oil change, air filter, spark plugs, brake fluid. Running-in check at 1,000 km. Consult the booklet for details.

How to use the navigation system ?

From the TFT display, access the 'Navigation' menu. You can enter a destination via voice command or the Multi-Controller. The navigation displays in real time on the screen, with turn-by-turn directions.

What to do if the ABS warning light comes on ?

The ABS light may flash during self-diagnosis (speed <5 km/h). If it stays on, a fault is present. Ride cautiously to a BMW workshop. ABS may be limited; braking remains possible without assistance.

How to replace the battery of the Keyless Ride key ?

Use a small CR2032 battery. Open the remote casing by sliding the tab. Replace the battery respecting polarity. Close. Range is about 1 meter.

What is the engine oil capacity and what oil to use ?

Capacity approximately 4.2 L with filter. Recommended oil: SAE 5W-40 or SAE 10W-40, API SH or higher, according to BMW specifications (Standard 4T). Check the level on the TFT display or dipstick.

USER MANUAL R 1250 GS (2022) BMW

Side profile of a black BMW i35 motorcycle with visible engine and alloy components (no text or symbols)

Données de la moto

Modèle

Labeled diagram of a motorcycle with numbered parts for identification

Labeled diagram of a car engine showing numbered components for identification

Labeled diagram of a car steering wheel with numbered buttons and control keys

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The provided OCR content is "____", which consists of four underscores. This is incorrect because underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. The OCR has hallucinated underscores where none should exist in the GT, violating the “Stylistic/Background Lines (Ignore)” rule. Therefore, the OCR result is inconsistent with the Ground Truth.

- Activer I'DTC. (83)

CONTACT AVEC KEYLESS RIDE 70

COUPE-CIRCUIT 75

APPEL D'URGENCE INTELLIGENT 75

ÉCLAIRAGE 78

CONTRÔLE DYNAMIQUE DE LA TRACTION (DTC) 82

RÉGLAGE ÉLECTRONIQUE DU CHÂSSIS (D-ESA) 84

MODE DE CONDUITE 87

ALARME ANTIVOL (DWA) 97

CONTRÔLE DE LA PRESSION DES PNEUS (RDC) 101

CHAUFFAGE 101

68 UTILISATION

SERRURE DE CONTACT/AN- TIVOL DE DIRECTION

Clés du véhicule

1 OFF TO RASS ON OFF TO RASS

Diagram of a car interior with numbered components labeled 1, 2, and 3

Diagram of a mechanical device with numbered annotations pointing to components

Close-up of a black mechanical hand gripping a cylindrical component with control buttons and a blue circular indicator labeled '1' (no text or symbols on the device itself)

Close-up of a black mechanical device with control buttons and a blue numbered marker (1), no visible text or symbols beyond the number.

Close-up of a black industrial control switch with blue indicator lights and a numbered label (1) pointing to the handle area.

Close-up of a black mechanical control switch with a blue indicator light and numbered label (1), no readable text or symbols beyond the indicator.

Activer I'DTC

Close-up of a mechanical hand gripping a camera or switch, with no visible text or symbols.

- Maintenir la touche 1 enfon-

Close-up of a mechanical control switch mechanism with no visible text or symbols

Close-up of a mechanical control switch mechanism with no visible text or symbols

Close-up of a mechanical control switch mechanism with no visible text or symbols

Close-up of a black handheld device with control buttons and a blue circular indicator labeled '1' (no readable text or symbols beyond the label)

1 SET RES OFF/ON

1 SET RES OFF/ON

1 SET RES OFF/ON

Close-up of a mechanical lever handle with blue directional arrows indicating rotation (no text or symbols)

Close-up of a mechanical lever handle with blue directional arrows indicating motion (no text or symbols)

ATTENTION

ALARME ANTIVOL (DWA)

Close-up of a camera lens with a blue indicator light and label '1' pointing to the lens (no text or symbols on the device itself)

Close-up of a black electronic device with a circular button and a blue arrow pointing to the number 1 (no text or symbols on the device itself)

Close-up of a black and silver electronic device with a circular button and label pointing to the button (no text or symbols on the device itself)

Close-up of a digital camera with a labeled button (no text or symbols on the device itself)

Close-up of a mechanical component with a blue circular marker labeled '1' pointing to a specific area (no text or symbols beyond the number)

application BMW Motorrad Connected

Diagram of a mechanical device with labeled components and directional arrows indicating flow or movement.

Diagram of a mechanical device with labeled components and directional arrows indicating motion or flow.

Mechanical component diagram showing directional arrows and a numbered label (1), no readable text or symbols present.

Close-up of a mechanical component with blue directional arrows indicating motion or flow (no text or symbols)

Close-up of a mechanical device with blue directional arrows indicating motion or flow (no text or symbols)

Commander la lecture audio

Diagram of a mechanical device with labeled parts and directional arrows indicating motion or flow

Close-up of a mechanical device with blue arrows indicating motion or flow direction (no text or symbols)

Close-up of a black and white car wheel rim with a long handle (no text or symbols visible)

Technical diagram showing mechanical assembly with labeled parts 1 and 2

Diagram of a mechanical component with blue arrows indicating rotation or movement, no text or symbols present

Diagram of a mechanical component with numbered parts labeled 1, 2, 3, and 4

Close-up of a mechanical component with no visible text or symbols

Mechanical assembly diagram showing a lever mechanism with no visible text or symbols

EMBRAYAGE

Mechanical component with blue arrows indicating rotational motion, no text or symbols present

Diagram of a mechanical component with numbered parts labeled 1, 2, and 3, showing connections between parts.

Internal view of a vehicle's head and engine compartment showing internal components (no text or symbols visible)

Interior view of a car's head and engine compartment showing internal components (no text or symbols visible)

Close-up of a mechanical component with a blue arrow pointing to a specific area, no visible text or symbols.

Diagram of a mechanical assembly with numbered components labeled 1, 2, and 3

Close-up of a motorcycle seat with blue arrows indicating direction (no text or symbols)

Diagram of a robotic device with labeled parts 1 and 2, likely illustrating a mechanical or robotic assembly.

Diagram of a mechanical device with labeled parts 1 and 2, showing structural components and connection lines.

Diagram of a mechanical assembly with numbered components and directional arrows indicating motion or flow.

Mechanical component diagram showing internal structure with no visible text or symbols

Mechanical component diagram showing a saddle-like structure with labeled part '2' (no text or symbols on the diagram itself)

Diagram of a motorcycle seat with labeled parts 1 and 2, likely for assembly or maintenance instructions.

Close-up of a mechanical component with no visible text or symbols

Diagram of a motorcycle seat assembly with labeled parts 1 and 2, showing structural components and alignment lines.

Mechanical component with a numbered label pointing to a specific part (no readable text or symbols)

Close-up of a mechanical assembly with a blue circular marker labeled '1' pointing to a component (no readable text or symbols beyond the number)

AVERTISSEMENT

Close-up of a robotic hand holding a small mechanical component, with a blue arrow labeled '1' pointing to the part (no text or symbols on the object itself)

Close-up of a camera control interface with labeled buttons and a numbered indicator '1'

Mechanical assembly diagram showing a blue circular component labeled '1' pointing to a shaft (no text or symbols beyond label)

Diagram of a mechanical component with labeled parts 1 and 2, showing directional arrows and a central rotating element.

Mechanical component diagram showing a circular housing with a blue arrow indicating rotation or movement (no text or symbols)

on MAX le

Technical diagram of a device casing with numbered annotations pointing to features

Black-and-white photo of a motorcycle on a vehicle chassis, no visible text or symbols

ATTENTION

Close-up of a mechanical assembly with hoses and components, no visible text or symbols

Close-up of a motorcycle wheel assembly with visible tire and screwdriver (no text or symbols)

-ROAD (mode standard)

DYNAMIC PRO, I'ABS Pro

Illustration of a two-wheeled bicycle lift with wheels and handle (no text or symbols)

Diagram of a mechanical assembly with numbered components and an arrow indicating direction or movement

Mechanical component with blue directional arrows indicating flow or movement (no text or symbols)

Close-up of a motorcycle wheel assembly with visible tire, brake lever, and numbered component (no text or symbols)

3D rendered mechanical part with blue directional arrows indicating force or movement (no text or symbols)

Close-up of a mechanical component with a blue circular label pointing to part 1 (no visible text or symbols)

Close-up of a black mechanical component with a blue 'MIN' label, no readable text or symbols on the main subject.

Mechanical assembly diagram showing a car suspension system with a numbered component (1) and no visible text or symbols.

MIN MAX MIN

Close-up of a mechanical component with a blue arrow pointing to a numbered feature (no text or symbols visible)

Close-up of a mechanical component with blue annotation lines and numbered marker (1), no readable text or symbols present.

Top-down view of a mechanical component with a blue circular marker labeled '1' pointing to a specific area (no text or symbols beyond the number)

Close-up of a BMW GS motorcycle's head and front wheel, showing brand logo and engine components (no readable text or symbols)

- Poser les vis 1.

1

- Poser les vis 1.

PNEUS

Technical diagram of a mechanical assembly with numbered components labeled 1, 2, and 3

Mechanical assembly diagram showing a shaft and housing component (no text or symbols visible)

Mechanical assembly diagram showing a gear and shaft component (no text or symbols)

Mechanical assembly diagram showing a wheel and gear components with a blue numbered label (1) pointing to a specific part.

Mechanical assembly diagram showing a shaft and housing component (no text or symbols visible)

Mechanical assembly diagram showing a brake caliper and suspension components (no text or symbols visible)

Technical diagram of a vehicle's head and side view with numbered annotations pointing to specific components.

Close-up of a car tire with a blue annotation box highlighting the wheel rim (no text or symbols present)

Technical diagram of a mechanical assembly with numbered components labeled 1 and 2

Diagram of a camera module with numbered annotations pointing to specific components

Technical diagram of a mechanical component with numbered parts labeled 3 and 4

Technical diagram of a mechanical assembly with numbered components labeled 1 and 2

Technical diagram of a car intake manifold with labeled parts 1 and 2, showing internal components and structural details.

- Poser la vis 1.

Close-up of a mechanical device with labeled component '1' and partial view (no readable text or symbols)

Close-up of a mechanical component with circular opening and internal wiring (no visible text or symbols)

Technical diagram of a mechanical component with labeled parts 1 and 2, showing internal components and alignment indicators.

Interior view of a mechanical or electronic component with circular opening and internal components (no visible text or symbols)

Interior view of a mechanical or electrical enclosure with circular opening and internal components (no visible text or symbols)

Close-up of a mechanical component with a blue indicator light and numbered label (1), no readable text or symbols present.

Close-up of a black and white electronic device with wires, labeled with number 1 (no text or symbols on the device itself)

Close-up of a black plastic electronic component with a blue circular label pointing to it, connected by wires (no text or symbols on the object itself)

asse- AIDE AU DÉMARRAGE

ATTENTION

Close-up of a mechanical component with circular opening and internal wiring, no visible text or symbols

Diagram of a mechanical assembly with numbered components, likely indicating parts of a vehicle or engine assembly.

Close-up of a mechanical component with visible internal parts and a blue numbered marker (1) pointing to a detail area.

Interior view of a battery pack assembly with no visible text or symbols

Interior view of a vehicle battery pack with labeled component (no text or symbols visible)

Technical diagram of a mechanical assembly with numbered components labeled 1 and 2

Close-up of a mechanical component with numbered annotations (1 and 2), no readable text or symbols present.

Close-up of a mechanical component with a blue circular indicator labeled '1' pointing to a small dark triangular component (no readable text or symbols)

• Poser la vis 1.
  • Régler la montre. ( 116)
  • Régler la date ( 116)

Close-up mechanical assembly with labeled component (1), no readable text or symbols present

1 50 A

4 2 3 per-

Diagram of automotive electrical connectors with numbered labels pointing to components

Close-up of a mechanical component with a numbered label '5' pointing to a specific part (no readable text or symbols beyond the number)

Diagram of a vehicle suspension system with labeled components 1, 2, and 3, showing directional arrows and a blue curved arrow indicating rotation.

Close-up of a mechanical component with a blue circular marker labeled '1' and black wiring (no readable text or symbols)

Diagram of a car interior with numbered components and directional arrows indicating motion or movement.

Déposer la valise

Diagram showing two labeled components (1 and 2) with blue arrows pointing to a mechanical component, likely illustrating a process or assembly.

Technical diagram showing two labeled components (1 and 2) with blue arrows indicating connection points.

Technical diagram showing mechanical assembly with labeled components 1 and 2, likely for repair or maintenance instructions.

Diagram of a car interior with numbered components and directional arrows indicating motion or movement.

Close-up of a printer's internal structure showing a blue indicator light and label '1' (no text or symbols on the diagram itself)

Open mechanical device with a blue circular indicator labeled '1' pointing to a central component (no text or symbols on the device itself)

Diagram of a device interior with numbered components and directional arrows indicating flow or movement.

Diagram of a device rear panel with labeled components, showing internal structure and blue annotations.

Diagram of a device rear panel with labeled parts, showing internal components and blue annotations.

Close-up of a mechanical component with a blue circular indicator labeled '1' (no readable text or symbols beyond the number)

Diagram of a device rear panel with labeled components, showing numbered parts 1 and 2.

Diagram of a printer internal structure with labeled parts (1 and 2), showing no readable text or symbols beyond labels.

ATTENTION

Close-up of a mechanical device with a blue circular label pointing to a component (no text or symbols visible)

Diagram of a computer mouse with labeled parts 1 and 2, showing the handle and keyway.

1 Figure n

Close-up of a mechanical component with a blue circular indicator labeled '1' pointing to a button (no text or symbols on the object itself)

Close-up of a mechanical component with a blue circular marker labeled '1' pointing to a rectangular opening (no text or symbols beyond the label)

1 LOPE WHEELS

Diagram of a mechanical or fluid system with numbered components and directional arrows indicating flow or movement.

Diagram of a device with numbered components and directional arrows indicating flow or movement

Diagram of a vehicle door panel with numbered components and directional arrows indicating flow or movement.

Diagram of a car charging station with numbered components and directional arrows indicating flow or movement.

Diagram of a mechanical device with labeled components and directional arrows indicating motion or flow.

pmw-motorrad.com/service

DECLARATION OF CONFORMITY 313

CERTIFICAT POUR L'ANTIDÉMARRAGE ÉLECTRO-

NIQUE 316

CERTIFICAT POUR LE KEYLESS RIDE 319

CERTIFICAT POUR LE CONTRÔLE DE LA PRESSION

DES PNEUS 323

CERTIFICAT POUR LE COMBINÉ D'INSTRUMENTS TFT 324

DECLARATION OF CONFORMITY

Manufacturer

Hereby, BMW AG declares that the radio equipment compl listed below are in compliance with Directive 2014/53/EU and with Radio Equipment Regulations 2017 of the United Kingdom. The full text of the EU/UK declarations of conformity are available at the following internet address:

bmw-motorrad.com/certification

Simplified EU Declaration of Conformity according to EU (2014/53/EU).

314 ANNEXE

Technical information

Radio equipment	Com- ponent	Frequency band Output/	Transmis-sion Power
EWS4 EWS 134	kHz		50 dBμV/m
HUF5750	Keyless Ride	434,42 MHz 10 mW
HUF8465	Keyless Ride	134,45 kHz	42 dBμV/m
HUF5794	Keyless Ride	433,92 MHz 10 mW
HUF8485	Keyless Ride	134,45 kHz	42 dBμV/m
ZB001	Keyless Ride	134.5 kHz	allowed66 dBμA/m@ 10m
ZB002	Keyless Ride	433.92 MHz	max.10 dBme.r.p
TXBMWMR	DWA	433.05 MHz - 434.79	MHz 18,8 dBm
RDC3 RDC 433.92 MHz <13 mW
Wus Moto gen 3	RDC 433,05 MHz - 434,79 MHz		<10 mWe.r.p.
MC24-MA4	RDC
WCA Motorrad-Lades-taufach	Charging compartment	110 kHz - 115 kHz <	6 W
ICC6.5in	Instrument Cluster	Bluetooth: 2402 MHz -2480 MHzWLAN: 2412 MHz -2462 MHz	Bluetooth:< 4 dBmWLAN: <20 dBm
Radio equipment	Com-ponent	Frequency band Output/	Transmission Power
ICC10in	InstrumentCluster	Bluetooth: 2402 MHz - 2480 MHzWLAN: 2402 MHz - 2472 MHz	Bluetooth:< +4 dBmWLAN: < +14 dBm
MRR e14FCR	ACC 76	- 77 GHz	Peak max.32 dBmNom max.27 dBm
TL1P22	Intelligent emergency call	832 MHz - 862 MHz880 MHz - 915 MHz1710 MHz - 1785 MHz1920 MHz - 1980 MHz2500 MHz - 2570 MHz2570 MHz - 2620 MHzGNSS: 1559 MHz-1610 MHz	23 dBm33 dBm30 dBm24 dBm23 dBm23 dBm
MCR001	Audio system

Declaration of Conformity

Radio equipment electronic immobiliser (EWS4)

For all countries without EU

Technical information

Frequency Band: 134 kHz (Transponder: TMS37145 / Type DST80, TMS3705 Transponder Base Station IC) Output Power: 50 dBμV/m

Manufacturer and Address

Australia/New Zealand

R-NZ

Brunei

AITI

TA No: DTA-007061

United Arab Emirates

TRA REGISTERED No: ER89926/20 DEALER No: DA96133I20

Philippiens

NTC

Type Approved No.: ESD-RCE-2023298

South Africa

ICASA

TA-2020/6131

APPROVED

India

ETA-SD-20200905860

Belarus

Indonesia

72790/SDPPI/2021

13349

Warning sign with exclamation mark inside a triangle, commonly used to indicate caution or hazard.

QR code image containing encoded data, no visible human-readable text

Simple geometric diagram with a semicircle and two overlapping rectangles (no text or symbols)

CONATEL

NR: 2020-11-I-0834

Singapore

Complies with IMDA Standards N3504-20

Taiwan

Geometric diagram of a triangle with an inscribed circle and the acronym MCMC below (no text or symbols within the diagram itself)

RFCL/47A/0920/S(20-3358)

Israel

This device complies with part 15 of the FCC Rules and Industry Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC § 15.21 Information to user

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

RF Exposure Requirements

To comply with FCC RF exposure compliance requirements, the device must be installed to provide a separation distance of at least 20 cm from all persons.

Serbia

Three black triangles arranged in a triangular pattern (no text or symbols)

P1620118300

Canada

Contains IC:

10430A-MREWS5012

This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

NAME CORE ICT

A1109091120AF04A3

Certifications

BMW Keyless Ride ID Device

3D rendered image of a black and silver remote control device with a circular dial and control knob (no text or symbols visible)

USA, Canada:

Product name: BMW Keyless Ride ID

Device FCC ID: YGOHUF5750

IC: 4008C-HUF5750

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Canada:

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

USA:

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Argentina:

Declaration Of Conformity

We declare under our responsibility that the product

BMW Keyless Ride ID Device (Model: HUF5750)

camplies with the appropriate essential requirements of the article 3 of the R&TIE and the other relevant provisions, when used for its intended purpose. Applied Standards:

1. Health and safety requirements contained in article 3 (1) a)

- EN 60950-1:2006+A11:2009+A1:2010+A12:2011; Information technology equipment-Safety

1. Protection requirements with respect to electromagnetic compatibility article 3 (1) b)

- EN 301 489-1 (V1 .9.2, 09/2011 ), Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements

- EN 301 489-3 (V1.4.1, 08/2002) Electromagnetic compatibility and radio spectrum matters (ERM); Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for short range devices (SRD) operating on frequencies between 9 kHz and 40 GHz

1. Means of the efficient use of the radio frequency spectrum article 3 (2)

- EN 300 220-1 & -2 (V2.4.1, 05/2012), electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW;

Part 1: Technical characteristics and test methods.

Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TIE directive

The product is labeled with the CE marking:

CE

Velbert, October 15 ^th , 2013

Dr. Aie

Benjamin A. Müller

Product Development Systems

Car Access and Immobilization -

Steeger Straße 17, D-42551

Velbert

Certification Tire Pressure Control (TPC)

FCC ID: MRXBC54MA4

IC: 2546A-BC54MA4

FCC ID: MRXBC5A4

IC: 2546A-BC5A4

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.

Declaration of Conformity

Radio equipment TFT instrument cluster

For all Countries without EU

Technical information

BT operating frq. Range: 2402 – 2480 MHz BT version: 4.2 (no BTLE) BT output power: < 4 dBm WLAN operating frq. Range: 2412 – 2462 MHz WLAN standards: IEEE 802.11 b/g/n WLAN output power: < 20 dBm

Manufacturer and Address

Manufacturer: Robert Bosch GmbH Address: Robert Bosch Str. 200, 31139 Hildesheim, Germany

Turkey

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

(This telecommunication equipments is in compliance with NTC requirements)

United States (USA)

This device complies with Industry Canada's licence-exempt RSSs and part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Couper le contact, 72

Keyless Ride, 41, 42

Mon véhicule, 121

Moteur, 49

RDC, 52, 53, 54, 55, 56

Récapitulatif, 28