XW402 - Battery charger Xtorm - Free user manual and instructions

Product Type	Wireless Battery Charger
Brand	Xtorm
Model	XW402
Dimensions	Approx. 10 x 10 x 1 cm
Weight	Approx. 100 g
Material	Plastic and Metal
Input Power	USB-C (5V/2A, 9V/2A)
Wireless Output Power	Up to 15 W (shared in dual mode)
Connectivity	USB-C, magnetic connection for dual chargers
Main Features	Wireless charging, dual magnetic charger, LED indicator
LED Indicator	LED ring: 3 flashes at power on and start of charging
Protection	Do not expose to water, humidity, heat; do not disassemble
Operating Temperature	0 °C to 40 °C
Compatibility	Qi-compatible devices (phones, earphones, etc.)
Package Contents	Wireless charger, USB-C cable, charging stand
Care and Cleaning	Wipe with a soft, dry cloth; do not use chemicals
Safety	Use only with certified wall chargers; do not use in the presence of flammable gas
Spare Parts and Repairability	Not user repairable; contact customer service for repairs
Warranty	Warranty voided in case of improper use
General Information	Follow WEEE procedures for recycling

Frequently Asked Questions - XW402 Xtorm

How to charge my phone with the Xtorm XW402?

Place your phone at the center of the charger or in the charging stand. Charging starts automatically. The LED ring flashes 3 times to confirm.

Can I use the XW402 with a phone case?

Yes, as long as the case is not metallic or too thick (less than 5 mm). Thin silicone or plastic cases do not interfere with charging.

How to create a dual charger with two XW402?

Magnetically connect two chargers together via the extension port. A single USB-C cable is enough to power both. The total power of 15 W is shared between the two (e.g., 10W/5W or 7.5W/7.5W).

What is the maximum charging power of the XW402?

The maximum power is 15 W for a single device. In dual mode, it is shared between the two chargers.

What does the flashing of the LED ring mean?

The LED ring flashes slowly 3 times at power on or at the start of charging to indicate that the device is ready or that charging has started. It then turns off to save energy.

Is the XW402 compatible with wireless earphones?

Yes, if they support wireless charging (Qi standard). Place them at the center of the charger.

Can I use a different cable than the one provided?

Yes, you can use any quality USB-C cable, but for optimal charging, use a cable supporting at least 2A and a suitable wall charger.

What to do if the charger does not work?

Check the USB-C cable and wall charger connection. Ensure your device is properly positioned. If the LED ring does not flash, try another outlet or contact customer service.

Is the XW402 waterproof?

No, it is not waterproof. Avoid any exposure to water or high humidity. Use it in a dry place.

How to recycle the XW402 at the end of its life?

Do not throw it in household waste. Drop it off at a WEEE (Waste Electrical and Electronic Equipment) collection point for proper recycling.

USER MANUAL XW402 Xtorm

Line drawing of a square gridded plate with grid pattern, no text or symbols present

1 SPECIFICATIONS

XW401XW402

USB-C™ PD 20W

Wireless 5W/7.5/10W/15W (max)

USB-C™ PD 20W

Wireless 5W/7.5/10W/15W (max)

80x80x8.5 mm 2x 80x80x8.5 mm

50 grams 100 grams

1x USB-C™ PD cable (1.5m)

1x Manual

2x USB-C™ PD cable (1.5m)

1x Manual

PRODUCT OVERVIEW 2

Technical line drawings of electronic devices including a front panel, control panel, and meshed screen (no text or symbols)

Input USB-C 20W

1

Wireless output 15W

2

LED light indicator

3

Official Xtorm Label

4

Connection 2 ^nd charger

5

3 CHARGING YOUR DEVICE

Three technical line drawings of electronic components: a mesh-wrapped device, a connected component with labeled section A, and a plug with three leads (no text or symbols present)

COMPATIBLE DEVICES

3A Connect the USB-C end of the charging cable to the input of the wireless charger and the other USB-C end to a wall charger.
3B Place your device on top of the wireless charger, your device will charge automatically.

CHARGE SEPARATELY 4

XW402

For charging two devices at the same time

Technical line drawing of two square electronic devices with grid patterns, connected to a power supply unit (no text or symbols)

4A Create a dual charger by connecting 2 chargers together magnetically. The expansion port transfers power, you only need to use 1 cable.
4B When the two chargers are connected together, the 15W maximum power will be split between them in 10W/5W, or 7.5W/7.5W.

LED LIGHT INDICATOR5

5A To indicate the power is on, the LED light ring will slowly flash 3x, and then turn off.
5B Place your phone in the middle of the charger, and charging will start automatically. To indicate charging has started, the LED light ring will slowly flash 3x, and then turn off.

IN THE BOX 6

Two overlapping rectangular panels with a grid pattern, no text or symbols visible

EN - ENGLISH

1 SPECIFICATIONS

2 PRODUCT OVERVIEW

3 CHARGING YOUR DEVICE

3.A Connect the USB-C end of the charging cable to the input of the wireless charger and the other USB-C end to a wall charger.

3.B Lay your device on top of the wireless charger or in the charging stand, your device will charge automatically.

4 RECHARGING THE POWER BANK

4.A Create a dual charger by connecting 2 chargers together magnetically. The expansion port transfers power, you only need to use 1 cable.

4.B When the two chargers are connected together, the 15W maximum power will be split between them in 10W/5W, or 7.5W/7.5W.

5 LED POWER INDICATOR

5.A To indicate the power is on, the LED light ring will slowly flash 3x, and then turn off.

5.B Place your phone in the middle of the charger or in the charging stand, and charging will start automatically. To indicate charging has started, the LED light ring will slowly flash 3x, and then turn off.

6 IN THE BOX

NL - NEDERLANDS

1 SPECIFICATIES

2 PRODUCTOVERZICHT

3 UW APPARAAT OPLADEN

5 LED STROOMINDICATOR

EN When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.

Provided with a temperature control chip that prevents overheating.

2. OVERLOAD PROTECTION

Protects both the internal battery as well as the battery of the attached device from overcharging.

3. SECURED POWER MANAGEMENT

Automatically picks the correct charging speed and efficiently devides power between attached devices.

4. SHORT CIRCUIT PROTECTION

Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.

5. A-CLASS BATTERY CELLS

We only use the best battery cells that provide the fast charging you need and meet all safety requirements.

6. HIGH EFFICIENCY

Our power products are built to power your device as efficient as possible. This ensures the least possible loss of energy during the charging process.

WARNINGS

EN Warnings

Don't drop, dissemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don't expose to any heat source. Keep out of reach of children. Don't use in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

NL Waarschuwingen

EU DECLARATION OF CONFORMITY
[In accord with the 1982(19715)63.1]

HIGHER QUALITY

= LOWER IMPACT

CUSTOMER SUPPORT

[e-mail]

[phone]

TELCO ACCESSORIES GROUP

Hoofdveste 19, 3992DH Houten

The Netherlands

MOREENERGY

XTORM.EU