AATM800STE - Tea maker BESTRON - Free user manual and instructions

USER MANUAL AATM800STE BESTRON

Instruction manual 12

Hasznalatiutasitas 27

Beveiling against oververhitting

• In the unlikely event that the device should become defective, never try to carry out the repair yourself. Always have repairs carried out by a qualified technician.
• This appliance may be not used by children over the age of 8 years old and persons with reduced physical, sensory or mental capabilities or lack of experience and know-how.
• Children are not allowed to clean and maintain the appliance, except if they are over the age of 8 years old and supervised.
• Keep the appliance and the cable out of reach of children under the age of 8 years old.
• Children must be supervised to ensure that they do not play with the appliance.
• Always place electrical appliances on a stable and flat, heat-resistant surface, in a place where it cannot fall.
• Certain parts of an electrical appliance can become warm or even hot. To avoid burns, do not touch these parts of the device.
• Do not allow electrical devices, cables or plugs to come into contact with water, other liquids or other heat sources.
• The appliance must not be operated by means of an external timer switch, or by a separate system with remote control.
• Only hold the device by the handles. All metal
  parts can be very hot.
• Use only the base supplied with the jug kettle. Never use the base for other purposes.
• Use the appliance only to boil or heat water. Never use it for other liquids!

ENVIRONMENT

• Dispose of packaging materials such as plastic and boxes in the appropriate containers.

• Do not hand this product in as normal household waste at the end of its life cycle, but hand it in at a collection point for reuse of electrical and electronic equipment. Look for the symbol on the product, instructions for use or packaging.

• The materials can be reused as indicated. By helping with reuse, recycling of materials or other forms of use of old equipment, you are making an important contribution to protecting the environment
• Ask the municipality for the correct collection point in your area.

OPERATION

The appliance is intended only for domestic use, not for professional use.

The following description is associated with the image on page 2:

1. Lid 7. Keep Warm Button
2. Limescale filter 8. Tea Type Selection Button
3. Glass jug 9. Tea Strength Selection Button
4. Base 10. On/Off Button
5. Handle 11. Temperature + / - Buttons

6. Auto Start Button 12. Infusion Time +/ - Buttons

7. Unpack the device and remove all packaging parts.

8. Clean the jug kettle before using for the first time (see 'Cleaning and maintenance').

Using the device as a kettle

1. Remove the lid (1), fill the glass jug (3) with the desired amount of water, replace the lid and place the glass jug on the base (4) and plug in the mains plug.
2. This appliance must be connected to an earthed mains socket.
3. If necessary, set the desired temperature with the Temperature + / - Buttons (11) and then press the On/Off Button (10).

When it reaches the set temperature, the device emits 3 signals in quick succession. You can now take the glass jug by the handle (5) off the base and pour out the hot water. After use, remove the plug from the wall socket.

WARNING:

The hot water or hot parts can cause severe burns. Always pick up the glass jug by the handle.

Using the appliance as a tea maker

1. Remove the lid, pull the tea basket, using the small ring, from the lift and fill the glass jug with the desired amount of water.
2. Open the tea basket and fill it with the desired amount of loose-leaf tea (or a tea bag). The amount depends on your personal preference (approx. 1 scoop of loose-leaf tea per 250ml of water). Close the tea basket again and place it back on the lift. Close the lid on the glass jug, place the glass jug on the base and plug in the mains plug.
3. Now select one of the pre-sets with the Tea Type Selection Button (8). Each pre-set has its own temperature and infusion time.
4. Now press the On/Off Button (10).

When it reaches the pre-set temperature, the tea basket will automatically sink into the hot water.

When it reaches the pre-set infusion time, the tea basket will rise again, and the device will give 3 signals in quick succession. You can now take the glass jug by the handle off the base and pour the tea. After use, remove the plug from the wall socket.

You can deviate from the pre-sets by setting your own temperature and/or your own infusion time. To do this, use the Temperature + / - Buttons and the Infusion Time + / - Buttons.

Using the auto start function

1. Press and hold the Auto Start Button (6) until the display starts flashing.
2. Use the Temperature + / - Buttons to set the current time.
3. Use the Infusion Time + / - Buttons to set the delay time in 30-minute increments. You can set the device to start automatically from 30 minutes to 10 hours.
4. Confirm with the On/Off Button.

WARNING:

If the auto-start function is used, you must fill the appliance with sufficient water and tea beforehand.

Using the keep warm function

Press the Keep Warm Button (7) before, during or after the brewing process to ensure that the tea is kept warm for a maximum of 60 minutes.

Overheating protection

The device is equipped with an overheating safety feature. This switches the appliance off automatically if it is switched on without or with too little water. The device must then cool down for at least 10 minutes before it can be used again.

CLEANING AND MAINTENANCE

1. Disconnect from mains power supply and let the appliance cool down.
2. Never immerse the appliance in water! Never put the appliance in a dishwasher.
3. Clean it with a damp cloth.
4. If the inside of the glass jug is discoloured, it is best to clean it with a damp cloth and some soda. Then rinse the glass jug properly.
5. Never use harsh, corrosive or abrasive cleaning agents or sharp objects (such as knives or hard brushes) to clean the appliance.

Dscaling

Depending on the hardness of the water, limescale will be deposited.

1. Remove the limescale filter from the tea maker. Remove the limescale filter and rinse the filter under running water. Re-insert the filter.
2. Fill the glass jug to the Max. level with a vinegar solution and bring to boil. Let the vinegar solution soak in the jug for a few hours. Then empty and fill it up to the Max. level with clean water and bring to boil. Empty the jug again. Repeat twice.

WARNING:

• Only use a vinegar solution or special commercially available limescale solvents.

SERVICE

If an unexpected problem occurs, please visit www.bestron.com/service for assistance.

NORMEDI SICUREZZA

ALL YOU WANT TO KNOW ABOUT YOUR UNIQUE 5 YEAR WARRANTY

ALLES, WAS SIE ÜBER IHRRE EINZIGARTIGE 5-JAHRES-GARANTIE WISSEN MÖCHTEN TOUT CE QUE VOUS VOULEZ SAVOIR SUR VOTRE GARANTIE UNIQUE DE 5 ANS ALLES WAT U WILT WETEN OVER UW UNIEKE GARANTIE VAN 5 JAAR TUTTO QUELLO CHE VUOI SAPERE SULLA TUA GARANZIA UNICA DI 5 ANNI TODO LO QUE QUIERES SABER SOBRE TU UNICA GARANTÍA DE 5 ANOS

BESTRON.COM/GUARANTEE

NEED HELP? CHAT WITH US!

WHATSAPP CUSTOMER SERVICE

BRAUCHEN SIE HILFE? CHATTE MIT UNSI WHATSAPP KUNDENSERVICE

BESOIN D'AIDE? DISCUTE AVEC NOUS! SERVICE CLIENTELE WHATSAPP

HULP NODIG? CHAT MET ONS! WHATSAPP KLANTENSERVICE

HO BISOGNO DI AIUTO? CHATTA CON NOI! SERVIZIO CLIENTI WHATSAPP

BESTRON.COM/WHATSAPP