Question 1

How to obtain a replacement basket for the BESTRON AAF7003DCO fryer?

Accepted Answer

To obtain a replacement basket (frying basket) for your Bestron AAF7003DCO fryer, the most reliable way is to contact Bestron customer service directly, which can provide you with the exact references and purchasing details: www.bestron.com/service15. Please indicate the full model AAF7003DCO to ensure compatibility.

The basket of your fryer is a removable component designed to withstand the high temperature of the appliance. It is equipped with a locking system with a release button that engages in the tray. To order a replacement basket, Bestron service will likely ask for your device's serial number or proof of purchase, so it is recommended to have them on hand before contacting.

In parallel, several retailers specializing in spare parts for household appliances offer Bestron baskets compatible with the AAF7003DCO model: SOS Accessoire, Electroménager Express, NPM Lille, Direct Repair, and Adepem. These retailers generally offer fast delivery (24 to 48 hours) and guarantee the authenticity of the spare parts.

The replacement basket must be compatible with the dimensions and locking system of your AAF7003DCO model. Be sure to always check the model reference before placing your order to avoid compatibility errors.

Question 2

How to use the BESTRON AIRP200UV air purifier?

Accepted Answer

To properly use your BESTRON AIRP200UV air purifier, start by removing the device from its box and plastic packaging. Ensure that no grille is obstructed. Then place the device on a stable, flat surface, keeping it away from walls and furniture to ensure good air circulation around the device. Before turning it on, remove the 3-in-1 filter, take it out of its plastic packaging, and put it back in place in the device.

Connect the purifier to a suitable electrical outlet with a voltage of 220 V. Then press the ON/OFF button to turn on the device. Use the FAN button to adjust the filtration speed among the 3 available levels: one press activates the lowest speed (indicator light turns on), a second press activates the medium speed, and a third press activates the maximum speed.

If your model is equipped with a UV-C lamp, you can activate it by pressing the UV-C LAMP button. Press this same button again to deactivate it. This lamp has a lifespan of about 20,000 hours and has a long-lasting protection before replacement.

To use the timer function, press the TIMER button: one press programs the shutdown after 2 hours, two presses after 4 hours, three presses after 8 hours. A fourth press disables the timer. You can also activate the SLEEP MODE by pressing the SLEEP RESET button for very quiet operation (the indicator blinks 10 times) which allows you to sleep peacefully while the device continues to purify the air.

The 3-in-1 filter (microfilter + activated carbon + HEPA H-13) has a lifespan of about 6 months. When the FILTER RESET indicator lights up, it is time to replace or clean the filter. To do this, turn off the device, open the cover by pulling it forward, then pull the filter forward from both sides. You can clean it with the small brush of your vacuum cleaner to remove dust and dirt. For optimal cleaning, carefully remove the membrane from the microfilter, clean it, and then put it back in place. You can also install a completely new filter (reference AIRP200FILT in a pack of 3). Replace the cover and press the SLEEP RESET button for 3 to 5 seconds to reset the filter replacement indicator.

Do not cover the device while it is operating and ensure that the power cord (180 cm) is not damaged. Regularly clean the device after use to maintain optimal purification efficiency.

Question 3

What should I do if my BESTRON AFH211B heater is no longer emitting warm air?

Accepted Answer

If your BESTRON AFH211B heater is no longer emitting warm air, here are several steps to check to identify and resolve the issue:

1. Check the power supply

Make sure the device is properly plugged in and that the outlet is functioning correctly.
Test the outlet with another device to confirm it is providing power.

2. Check the device settings

Ensure that the thermostat is set to a sufficiently high temperature.
Make sure the heating function is activated and not set to fan mode only.

3. Cleaning and maintenance

If your device has an air filter, clean or replace it if it is dirty, as this can reduce the flow of warm air.
Check that there are no obstructions blocking the air outlet or air intake of the device.

4. Overheating protection

If the device has been running for a long time, it may have triggered a safety device to prevent overheating. Allow it to cool down for about 15 to 30 minutes before turning it back on.

5. In case of persistent malfunction

If after these checks your BESTRON AFH211B heater still does not emit warm air, it is advisable to consult a qualified professional for diagnosis and possible repair.

User manual BESTRON : user manuals and guides in PDF

Models BESTRON most viewed

Browse manuals BESTRON by appliance type

Recent questions about devices BESTRON