727FL - Kettle Flama - Free user manual and instructions

USER MANUAL 727FL Flama

AMBIENTE Este símbolo indica la recogida separada de equipos eléctricos y electrónicos. El objevo prioritario de la recogida de estos residuos es reducir la candad a eliminar, promover la reulización, el reciclado y otras formas de valorización, para reducir sus efectos negavos sobre el medio ambiente. Cuando este aparato esté fuera de uso, no debe desecharse con los demás residuos urbanos no diferenciados. El usuario es responsable de proceder a su entrega gratuita en las instalaciones de re- cogida selecva existentes para ello. La recuperación de los equipamientos fuera de uso también podrá ser realizada por los puntos de venta, en la compra de un equi- pamiento nuevo que sea equivalente y que desempeñe las mismas funciones. Para obtener información más detallada so- bre los locales de recogida debe dirigirse a su Ayuntamiento o a un punto de venta de estos equipamientos.12 www.ama.pt ELECTRIC KETTLE SECURITY INSTRUCTIONS Please read these instrucons carefully before using the appliance for the rst me and keep them for future reference. FLAMA shall not be liable for any use that is not in accordance with the instrucons. Please check that the supply voltage of your electrical system corresponds to the voltage on the appliance’s rang plate. This appliance must be connected to an earthed socket. Any error in the connecon will void the Warranty. This appliance is not intended to be operated using an external mer or a separate remote control system. This appliance may be used by children aged 8 and over if they are supervised or have received instrucons concerning the safe use of the appliance and understand the risks involved. Cleaning and maintenance must not be carried out by children unless they are over 8 years old and supervised. Keep the appliance and its power cord out of the reach of children under the age of 8. This appliance may be used by persons with limited physical, sensory or mental abilies or lack of experience and knowledge, if they are supervised or have received instrucons concerning the safe use of the appliance and understand the risks involved. Children must not play with the appliance. This appliance is intended for households and similar uses, such as: - Sta kitchen areas in stores, workshops and other working environments; - Coages; - Guests of hotels, motels and other residenal environments, - Hotel room-type environments. The Electric Kele was designed to heat or boil water. Do not use13 English any other liquid. Only use the power base provided with the Electric Kele. To ll the Kele, always remove it from the power base, to prevent water from overowing onto it. Never ll the Kele above the maximum level indicator, marked on the water level indicator, as boiling water may spill out. Never switch on the Electric Kele without water in it. Never switch on the Electric Kele with the lid open. Never run the Electric Kele when the power base is wet. When it is switched on, the body of the Kele heats up. Use only the handle of the Electric Kele to move it around. If the Kele is too hot, allow it to cool down before lling it with cold water. Please disconnect the appliance from the power supply by removing the plug from the xed power socket aer each use and when cleaning. Clean the outside of the Electric Kele and the power base with a dry, absorbent cloth. Never immerse the kele or the power base in water or any other liquid for cleaning. Do not use the appliance if it is not working properly, or if it is in any way damaged. Any intervenon other than cleaning must be carried out by an Authorized FLAMA Technical Assistance Service. Do not use the appliance if the power cord or plug are damaged. Do not aempt to replace the power cord or plug as this is a dangerous operaon. Have them replaced immediately at an Authorized Flama Technical Assistance Service. This product complies with the Low-Voltage and Electromagnec Compability Direcves. This instrucon manual is also available in PDF format at www. ama.pt.14 www.ama.pt DESCRIPTION

5. water level indicator

IMPORTANT ADDITIONAL INFORMATION Never immerse the Kele or the hopper base in water or any other liquid. Clean the outside of the Kele and the Feed Base with a dry, absorbent cloth. Before pung the Kele back into operaon, unplug the plug from the socket and wipe o the water with a dry, absorbent cloth. Never run the Water Kele with the power base wet. OPERATION This product was designed to make its use simple, praccal, ecient and safe. Wireless device: maximum ease of use, cleanliness and security. The power cord is independent from the electric kele. Lid safety lock: ensures the lid does not open when pouring water. Auto-o: the kele switches o automacally when the water starts boiling. Maximum level indicaon: the water level indicator, indicates the maximum amount of water that the electric kele can take (1.7lt). Level indicator: shows the amount of water that is inside the electric kele. Cable winder: for easy storage, wrap the cable around the boom of the power base. Before rst use Clean the inside of the kele and then boil water (at least once). Discard the water from the 1st boil. During the rst use it can release some odours, which is perfectly normal. Use Unwind the power cord from the power base. Place the pad on a at surface away from hot surfaces or ames. Open the kele lid by pressing the lid opening buon to unlock the lock. Fill the electric kele with water, outside the power base. Never exceed the maximum level indicator, that is, do not ll with more than 1.7 litres. Use the level gauge to check how much water is in the kele. Close the lid completely. Never operate the kele with the lid open, as the “auto power o” system only works with the lid closed. Place the electric kele on the power base, ng it snugly into the adapter. Press the on/o switch to turn on the kele. The indicator light turns on indicang that the kele has started up. As soon as the water boils, the jar will automacally turn o. The indicator light turns o. Remove the electric kele from the power base using the handle to move it.15 English If you want to stop heang, to get hot water without boiling, just turn the on/o switch to the “0” posion and it turns o automacally (the indicator goes o). If you want to reheat (reheat) the water, t the kele to the power base, set the on/o switch to the “I” posion to turn the kele on (and the indicator light comes on). Aer the water comes to a boil and the kele switches o automacally, a few drops of water may appear on the hopper. This is normal, it results from condensaon generated during operaon, and water appears through the holes in the boom of the kele. Before pung the kele back into operaon, unplug the plug from the socket and wipe o the water with a dry, absorbent cloth. Never run the water kele with the power base wet. If by accident, pour water into the power base, proceed as follows: - disconnect the plug from the socket. - clean the infeed base with a dry, absorbent cloth. - clean the surface where the power base is placed. - connect the plug to the socket and restart use. If you carelessly put the kele to work without water, the safety device that prevents overheang will actuate and turn it o. In this situaon, remove the kele from the feed base; let it cool down; ll with water without exceeding the maximum level indicator; place the kele on the power base and reconnect. Never put cold water in a very hot kele, as you run the risk of geng burned.

MAINTENANCE AND CLEANING

Aer each use and before proceeding with any cleaning operaon, always unplug the plug from the socket and allow the kele to cool down. Descaling extends the life of the electric kele, improves its behaviour, reduces electricity consumpon and guarantees the correct funconing of the safety system that prevents overheang. Never immerse the kele or feed base in water or any other liquid. Clean the outside of the kele and the feed base with a dry, absorbent cloth. Do not use abrasive products. How to remove the lter: To remove the kele lter for cleaning, remove the kele from the spout base and allow to cool. Do not remove the kele lter if it is sll hot or lled with water. - Open the lid by pressing the open buon. - Remove the lter. Carry out the cleaning operaon. Place the lter in the same place, making sure it is properly placed. Do not use the kele before making sure the lter is correctly placed. DESCALING You should descale the electric kele monthly, or more oen depending on the lime scale in the water and how oen you use the kele. To remove limescale stains from the inside of the body, periodically descale the jar using one of the following methods: - Use a liquid descaling agent, available in commerce or at authorized Flama aer16 www.ama.pt sales services, and proceed according to the instrucons that come with the descaling agent or - Use a mixture of half litre of water with 5 to 6 tablespoons of lemon juice. When descaling, pay aenon to the following: - First add the water and then the descaling agent or lemon juice. - Do not let the mixture boil and be aware of possible foam formaon. - Aer descaling, boil water at least twice, before normal use. If brown spots appear on the inside of the body, it is not rust, but a deposit of ferric limestone that is easily removed.

ANOMALIES AND REPAIR

In case of malfuncon, please take the appliance to an authorized Technical Assistance Service. Do not aempt to disassemble or repair the appliance, as this may be dangerous.

PROTECTING THE ENVIRONMENT

This symbol indicates the separate collecon of electrical and electronic equipment. The main objecve of the separate collecon of this waste is to reduce the quanty to be disposed of, promote re- use, recycling and other forms of recovery in order to reduce its negave eects on the environment. When it is no longer in use, this appliance must not be disposed of together with other unsorted municipal waste. The user is responsible for delivering it free of charge to the selecve collecon facilies available for that purpose. Pieces of equipment that are no longer in use can also be taken back at points of sale, by purchasing new pieces of equipment that are equivalent and have the same funcons. For more detailed informaon on collecon points, please contact your City Council or a point of sale for this equipment.17 Français BOUILLOIRE

1. Keep the proof of purchase (receipt) for this

product carefully. When a repair is made under these condions, the technician will require proof of purchase. This assistance can only be provided once you have proven, with the proof of purchase, that your appliance is within the warranty period.

2. The warranty period for this appliance is dened

by the respecve EU Direcve in force on the date of purchase/delivery.

3. Within the guarantee period, we will repair or

replace, free of charge, any parts which, during the normal use of the appliance, have deteriorated as a result of a proven material or manufacturing defect.

4. This warranty does not cover consumable items,

light bulbs, easily breakable parts made of glass or plasc, or any other defects that do not impair its proper funconing.

5. We accept no liability for damage caused by

incorrect or careless use of the appliance, by its connecon to an electrical current other than that indicated on the appliance’s rang plate, by faulty electrical installaon, or by atmospheric, chemical or electrochemical causes. Other claims or demands for compensaon relang to objects which are not an integral part of the appliance will be denied.

6. The provision of assistance under warranty does not

extend the warranty period. Only within this period will assistance be provided under warranty. The right to assistance is only granted to the rst purchaser of the device and cannot be transferred to a third party.

7. The warranty expires when unauthorized persons

have aempted to repair, modify or replace parts of the appliance.

8. All expenses and risks of transportaon to our

factory or vice versa will always be borne by the buyer. WARRANTY CONDITIONS To benet from the Technical Assistance service during the 36-month warranty period aer the date of purchase, you will need to: Present the Invoice/Proof of Purchase, stang the model and the manufacturing number of the product (whenever possible). Note: Failure to present the aforemenoned documents will be grounds for not providing services under warranty.