SaluSpa 60030 - Spa BESTWAY - Free user manual and instructions
Find the device manual for free SaluSpa 60030 BESTWAY in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Inflatable spa |
| Brand | Bestway |
| Model | SaluSpa 60030 |
| Capacity | 4 to 6 persons |
| Power supply | 110-120 V ~, 60 Hz, single phase, 12 A |
| Maximum power | Approximately 1440 W |
| Maximum water temperature | 40 °C (104 °F) |
| Temperature adjustment range | 20 °C to 40 °C (68 °F to 104 °F) |
| Massage system | 2 power levels, automatic shut-off after 30 minutes |
| Filtration system | Integrated with replaceable filter cartridge |
| Freeze Shield™ system | Automatic freeze protection between 6 °C and 10 °C |
| Wi-Fi connectivity | Bestway Smart Hub™ app (Android 7.0+ / iOS 10.0+) |
| Energy-saving timer | Programmable from 1 to 999 hours |
| Liner material | PVC (TriTech™ for some models) |
| Protective cover | Spa cover included |
| Electrical safety | Integrated GFCI, automatic child lock |
| Filter cartridge maintenance | Daily cleaning, weekly replacement |
| Recommended chemicals | Chlorine or bromine (tablets), pH 7.4-7.6, alkalinity 80-120 ppm |
| Available spare parts | Filter cartridge, seals, plugs, patches |
| Repairability | Adhesive patch (PVC) and patch with glue (TriTech) |
| Winter use | Possible down to -10 °C with Freeze Shield activated |
| Error code E03 | Water temperature below 4 °C: unplug and wait for 6 °C |
| Warranty | The warranty does not cover damage caused by chemical imbalance |
Frequently Asked Questions - SaluSpa 60030 BESTWAY
How to test the GFCI before use?
Plug in the spa, press the Test button on the GFCI: the indicator should go off. Then press Reset to restore power. If the test fails, do not use the spa and contact customer service.
What is the maximum water temperature?
The maximum water temperature is 40 °C (104 °F). Never add water above 40 °C to the spa.
How to set the energy-saving timer?
Press the Timer button (Ⓞ symbol). Set the heating duration (1-999 h) with the +/- keys, then confirm. Then set the delay before activation (0-999 h). The timer does not repeat automatically.
What to do in case of error code E03?
Error E03 indicates water temperature below 4 °C (40 °F). Unplug the pump and wait until the water reaches at least 6 °C (43 °F) before restarting.
How often to clean the filter cartridge?
The filter cartridge should be cleaned daily and replaced weekly or when clogged.
How to connect the spa to the Wi-Fi app?
Download the Bestway Smart Hub app. Turn on the spa, press and hold the Wi-Fi button for 3 seconds (indicator blinks slowly). Follow the instructions in the app to connect the spa to your 2.4 GHz network.
What chemicals to use for the water?
Use chlorine or bromine tablets (not granules) in the chemical dispenser. Keep pH between 7.4 and 7.6 and free chlorine between 2 and 4 ppm.
How to repair a leak in the liner?
For standard PVC, use the provided adhesive patch: clean, apply the patch, wait 30 seconds before reinflating. For TriTech, use a PVC patch with glue (not provided), wait 30 minutes before inflating.
Can I use the spa in winter?
Yes, with the Freeze Shield™ system activated. The spa maintains water between 6 °C and 10 °C. Do not use if ambient temperature is below -10 °C (14 °F).
What to do if the pump does not heat?
Check that the set temperature is higher than the water temperature, that the filter cartridge is clean, that the spa is covered, and that the water is at the required level. If the problem persists, contact customer service at bestwaycorp.com/support.
User questions about SaluSpa 60030 BESTWAY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Spa in PDF format for free! Find your manual SaluSpa 60030 - BESTWAY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SaluSpa 60030 by BESTWAY.
