IAN 279181 - Lighting MELINERA - Free user manual and instructions

USER MANUAL IAN 279181 MELINERA

25 GB/IE/NI LED Pine Tree Garland Introduction We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Be- fore using the product, please familiarise yourself wi

all of the safety information and instructions for use. Only use the unit as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Intended use This product is suitable as decorative indoor and outdoor lighting. Any modification to the product are considered improper use and may result in consider- able hazards. The manufacturer will not accept lia- bility for loss or damage arising from improper use. This device is not intended for commercial use. Parts Description

ON / TIMER / OFF switch Technical Information Item no.: 10332 Illuminant: 80 warm-white LEDs (LEDs not replaceable) Power consumption per LED: approx. 0.06 W Protection type: IP44 (splash-proof) Total length: approx. 10 m, approx. 5 m of which power cord Power consumption (Power supply): 3 V , 1.2 W Input voltage (power supply): 220–240 V∼ Power supply model number: WD-IP-03001.2-T Attention! Only use the pine garland with the WD-IP-03001.2-T power supply. List of pictograms used: Please read the operating instructions! Never leave children unsu- pervised with the packaging material or the device. Watt (effective power) Severe or fatal injuries may occur. Direct current Caution! Risk of electric shock! Volt (AC) Dispose of the packaging and device in an environ- mentally-friendly manner! Observe the warnings and safety notices!6 GB/IE/NI Scope of delivery 1 LED Pine Tree Garland 1 Power supply 1 Set of instructions for use Safety Notices

READ THESE INSTRUCTIONS BEFORE USING

THE PRODUCT! PLEASE KEEP ALL SAFETY IN-

STRUCTIONS AND INSTRUCTIONS FOR USE

FOR INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Choking hazard. Keep children away from the product. This product may be used by children aged 8 years and up, as well as by persons with re- duced physical, sensory or mental capacities, or lacking experience and / or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the as- sociated risks. Do not allow children to play with the product. Cleaning and user maintenance should not be performed by children without supervision. Do not use the product if you notice any signs of damage. Never expose the product to high temperatures as the product may otherwise be damaged. Avoid mechanical strain on the product! In the event of damage, repairs or other problems with the product, please contact an electrician. Remove packaging prior to use. RISK OF OVERHEATING! Store the product in the original packaging after use to prevent accidental damage. This product does not contain any parts that can be serviced by the user. The bulbs cannot be replaced. Never electrically connect the product with another product. Do not touch the plug for the garland or the garland itself with wet hands. The garland is splash-proof (IP44). This protection class will only be maintained, if the electrical socket used also complies with at least this pro- tection class. Please remember the power supply will continue to draw a small amount of electricity even with- out the light being operated so long as the power supply is plugged into the socket. To switch the device off completely, unplug the power supply from the socket. The light bulbs are not replaceable. If a light bulb fails at the end of its life, the entire light needs to be replaced. Do not operate the product whilst wound. Do not kink! Only operate the garland with the included power supply. The branches consist of metal wire and scratch or discolour delicate surfaces. Initial use Insert the plug on the lead into the socket of the power supply. Tighten the union nut, turning clockwise. Plug the power supply into an easy to access socket! Select a socket where you can unplug the power supply to switch off the garland

Timer function This product has a 6-hour timer with automatic daily recurrence. Press the switch twice to switch on the garland