2Go XL TG1B900 - Blender WILFA - Free user manual and instructions

USER MANUAL 2Go XL TG1B900 WILFA

6 ASSEMBLING THE APPLIANCE

6 USING THE APPLIANCE

It’s important to read the instructions for the blender and follow these, before using the bottle together with it.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.

• Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.

• Children shall not play with the appliance.

• This product is intended for household use and not for commercial use. SAFETY PRECAUTIONS WHEN THIS APPLIANCE IS IN USE TOGETHER WITH YOUR BLENDER:

• Switch off the blender and disconnect from supply before changing accessories or approaching parts that move in use.

• Never leave the appliance and the blender unattended connected to the mains! Always pull the plug out of the socket when you do not use the appliance, even if it is only for a brief moment.5

• Blades are very sharp. Handle with care.

• Only remove the bottle while motor is off.

• Avoid overwork of motor.

• Avoid contacting moving parts. Note: Do not let the appliance operate more than 3 minutes continuously. Let the appliance cool down to room temperature before continuing to use the appliance.

The 2Go Bottle is only suitable for use with cold ingredients. Do not process hot ingredients.6

Clean the units and parts thoroughly before you use the appliance for the rst time. Note: The blades are very sharp. Wash with care. Never touch the blades with your nger.

ASSEMBLING THE APPLIANCE

• Put your preferred ingredients into the bottle. Do not ll over the maximum line.

• Screw the blade assembly onto the bottle.

• Place the adapter onto the base.

• Turn the bottle upside down, with the blade assembly onto the base, and twist the bottle until it clicks into place.

• Make sure the indicator is set on 0 when you place the bottle.

• After assembling the bottle onto the blender, the available programs light up on the display.

• Choose the preferred pre-set program by turning the wheel anti-clockwise.

• Select speed manually by turning the wheel clockwise.

• Press and hold pulse on the display if you want to use the pulse function. The motor will increase to full speed. It returns to stand by when you release your nger from the display.

• Keep one hand on the bottle while blending.

• Do not blend more than 3 minutes with the 2GO bottle. Note: When the bottle is connected to the main unit, the hot soup program is deactivated, and the manual speed is running on 50%.7

1. Disconnect the power from main supply.

2. Remove the bottle (together with blade assembly unit interface) from the

3. Detach the blade assembly unit interface from the bottom of the bottle.

CLEANING Note: Always clean the removable parts immediately after use. Be careful when cleaning the parts. Avoid touching the sharp blades.

1. Disconnect the power from main supply.

2. Disassemble all removable parts before cleaning.

3. Clean the bottle in the dishwasher or in warm water with cleanser. The knifes

should not be washed in a dishwasher. Be careful when cleaning the blade assembly!

4. Use dry cloth to clean the main body.8

GUARANTEE Wilfa issues a 5 year guarantee on this product from the day of purchase is done. The guarantee covers production failure or defects that arise during the guarantee period. Your purchase receipt works as proof towards retailer if claiming your guarantee. The guarantee is valid only for products that are bought and used in private households. The guarantee is not valid if the product is used commercially. The guarantee is not valid if the product is misused, used by negligence, if not following instructions given by Wilfa, if modied or if unauthorized reparation is done. The guarantee is also not valid for normal wear of the product, misuse, lack of maintenance, use of wrong electrical voltage or:

• Overloading of product

• Parts which are normally worn down

• Parts you can expect being replaced regularly (e.g. lter, battery etc.)9 AS Wilfa Nydalsveien 24, 0484 Oslo, Norway

For support please visit us at wilfa.com, and see our customer service/support page. Here you will nd frequently asked questions, spare parts, tips and tricks and all our contact information. RECYCLABILITY This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling free of charge.10

VEILIGHEIDSVOORSCHRIFTEN WANNEER DIT APPARAAT

HET APPARAAT MONTEREN