Waterbirds - Uncategorized Blumfeldt - Free user manual and instructions

USER MANUAL Waterbirds Blumfeldt

Dear Customer, Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.. CONTENTS Technical Data 9 Safety Instructions 10 Assembly 11 Disposal Considerations 12 Manufacturer & Importer (UK) 12 TECHNICAL DATA Item number 10034809 Power supply 220-240 V 50/60 Hz10

• This device may be only used by children 8 years old or older and persons with limited physical, sensory and mental capabilities and / or lack of experience and knowledge, provided that they have been instructed in use of the device by a responsible person who understands the associated risks.

• To reduce the risk of electric shock, do not remove any of the covers. The unit contains parts that are not accessible to the user.

• The unit label is located on the back of the unit.

• Do not place any vessels lled with liquids, such as vases or watering cans, on it.

• Do not drop metal objects on this unit.

• Do not place heavy objects on top of this unit.

• Only use accessories and attachments approved by the manufacturer.

• Have repairs carried out only by qualied specialists.

• Repair is required if the product has been damaged in any way, i.e. if objects have fallen on it, if it does not function properly or if it has been dropped. Do not attempt to repair the unit yourself. Opening the cover may result in electric shock or other injury.

• Do not pull, bend, or place heavy objects on the cable.

• Do not place open ame sources, such as burning candles, on the product.

• Never let the pump run empty.

• Operate the pump only in fresh water ponds at temperatures up to 50°C maximum.

• Do not place the solar panel in hollows or holes where water can collect. Choose a level location with a solid surface. The plastic bolt should be placed in sufciently solid soil.

• Do not place the appliance on top of other appliances that may become hot. This heat could damage the unit.

• Do not use volatile liquids such as insect sprays. Excessive pressure when wiping may damage the surfaces. Rubber or plastic parts should not be in contact with the unit for long periods of time.11

1. Unpack the contents of the box and check to make sure that all items are

accounted for and in good condition.

2. Select a at, even surface for the assembly and nal location of your

fountain. Place the fountain on an insensitive surface. It can come to splashing water. For any damage to carpets, laminate, parquet or anything else, we assume no liability.

3. Run the cord from the pump through plastic tube at the fountain basin

reservior and out the base, making sure to place the pump in the center of the reservior. (1)

4. Carefully attach the water supply tube located from top cover to the pump

outlet on top of the pump. Then connect the male jack with female jack of LED light. (2)

5. Insert birds into fountain base. Add clean water into the basin. The water

level should be approximately 1 inch lower than the top edge of the basin. (4)

6. Connect the pump power cord to an outlet and the product will begin to

function as intended. (5)

7. To eliminate the possibility of water damage around your fountain, check

for leaks and excessive splashing after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area where it cannot be damaged.

8. Do not leave your fountain running for extended periods of time when no

one is present to observe the performance.

9. Please refresh the fountain with water each week to ensure it in good

10. Do not allow the pump to run unless it is covered with water.

The diagrams shown are for illustrative purposes only.12

DISPOSAL CONSIDERATIONS If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service. MANUFACTURER & IMPORTER (UK) Manufacturer: Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany. Importer for Great Britain: Berlin Brands Group UK Ltd PO Box 1145 Oxford, OX1 9UW United Kingdom13