mSix Wireless - Helmet JAYS - Free user manual and instructions

USER MANUAL mSix Wireless JAYS

m-Six Wireless Getting started, safety and warrantyImportant safety instructions

1. Read, follow and keep these instructions.

2. For the best possible experience, always use the product as

described by the manufacturer.

3. Always handle your earphones with care and protect them from

4. Clean your earphones using a soft dry cloth. Never use water,

cleaning detergent, leather polish or other substances as they may damage your earphones permanently.

5. Avoid exposure to extreme conditions such as very cold or hot

temperatures, magnetic elds or damp environments.

6. Listening to music at high volume for prolonged periods of time can

cause permanent damage to your hearing.

7. Contains small parts and are not suitable for children age three

9. The earphones contain a Lithium battery. If misused or damaged it

can become a hazard and is at risk of explosion.

10. Should a battery cell leak, do not allow the liquid to come in contact

11. The earphones must be switched off before boarding an aircraft.

12. The earphones must not be disposed of with regular household

waste. Please dispose of in accordance with local regulations.

13. Do not use your earphones in the immediate proximity (10 cm) of

14. Do not subject the product and included accessories to abnormal

16. Do not charge the earphones in temperatures below 0°C or

17. Do not attempt to burn the earphones. The battery could explode

causing injury and death.

18. Do not attempt to open, modify, disassemble, repair or in other

way access the internal structure of the earphones. They are not user serviceable.

19. Do not use or store the earphones near to a vehicle airbag due

20. Do not use earphones while driving, jogging or walking through

trafc areas. Earphones effectively isolate external sound and noise, which means that when in use, you might not be able to hear your surroundings.

21. Do not drop, sit on or cause other unusual impact to the earphones.

22. Do not expose to re, water or high voltage equipment.

23. Do not expose the product to rain or moisture.

24. Do not use the earphones near water, bathtubs, sinks, saunas,

pools, other liquids or moist areas. Statements US FCC interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. MODIFICATION: Any changes or modications not expressly approved by the grantee of this device could void the user’s authority to operate the device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. US FCC radiation exposure statement FCC ID: 2AJOO-M6W01. The product comply with the US portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. EU Declaration of conformity Hereby Jays Group AB declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ EU and all other EU directive requirements. The complete declaration of conformity can be found at www.jaysheadphones.com. Caution Risk of explosions if battery box is damaged or opened. Dispose of used battery according to your local waste disposal authority. KO KC statement 해당 무선설비는 운용중 전파혼신 가능성이있으므로 인명안전과 관련된 서비스는 할수없습니다. Complies with IMDA Standards DA105282

Model name: M6W01Getting started Power on/off and pairing To power on, press and hold the button for 2s. A voice assistant will tell you the current battery status. Pairing mode will automatically be initiated, indicated by the LED blinking slowly. Go to Bluetooth

settings on your device and select “JAYS m-Six Wireless”. The blinking LED will turn off upon a successful connection followed by a short audio beep. To power off, press and hold the button for 2s. Reconnecting and additional pairing Next time you power on, the earphones will automatically try to reconnect to the most recently used device. If not found, or if you manually disconnect through your device, pairing mode will automatically be initiated again. To force pairing mode, press and hold button for 4s from off state. Battery status and fast charging When powering up, the voice assistant will tell you the current status. Battery high: 70-100% Battery medium: 30-70% Battery low: 0-30% When battery is below 5%, “Battery low” will be announced automatically. Charge using the included m-Six magnetic fast charge cable and connect it to any certied USB power output. The fast charge will charge your m-Six battery up to 25% in 15 minutes, and 50% in 30 minutes. A full 100% charge will take around 1 hour and 45 minutes (depending on temperature and charger). Charging is indicated by a blinking red light, and a full charge is indicated by a solid white light. Troubleshooting Problem pairing and connecting

• Make sure the earphones are not connected to another device.

• Disable and enable Bluetooth on your device.

• Move the earphones closer to the device or alter their positions to avoid Bluetooth interference.

• Verify no other wireless equipment interfere with your earphone Bluetooth signal. Problem with sound transmission Move the streaming device to another position. Your body, distance, different materials and other wireless equipment can interfere with the wireless signal between your device and earphone. Legal & Warranty Environmental information This product complies with international directives, including but not limited to WEEE Directive (2012/19/EU). Do not dispose with normal household waste. Please consult your local waste disposal authority for guidance on how to properly recycle or dispose of this product. Manufacturer’s limited warranty Your original Jays Group AB product is covered by a warranty of twelve (12) months from the date of purchase of a brand new, unused Jays Group AB product by the original purchaser. Jays Group AB guarantees that the product is free from faults in the materials, design and workmanship when it was sold to the purchaser. If you are not able to submit the receipt when making a warranty claim you may be obliged to pay for any repairs carried out. Proof of purchase must clearly state the date of purchase, name of the product and authorized resellers’ details The Warranty Period cannot be extended or renewed due to subsequent resale or replacement of the product. This Limited Warranty does not affect your legal rights under your applicable national laws relating to the sale of consumer electronic products. Defective parts replaced within the Limited Warranty Claim shall become the property of Jays Group AB. What is not covered by the limited warranty?

• Faults caused by wear and tear, age-related battery capacity loss, accidents, dropping, mechanical damage, moisture, chemical products, abnormal impact damage or force majeure.