HRB 6300 ATS - Cooker TEKA - Free user manual and instructions

USER MANUAL HRB 6300 ATS TEKA

Function control dial

Electric clock/timer

Temperature control dial

User’s Guide Function selector symbols Oven functions INFORMATION For a description of how to use each of the features, see the cooking guide that comes with your oven. OVEN SWITCH-OFF CONVENTIONAL GRILL MAXIGRILL LOWER ELEMENT

ELECTRICITY On connecting the oven to the mains electrical power for the rst time, or after a power cut, the LED

(4) ashes constantly. The oven will not function in this mode. The clock operation is controlled with the clock control button

(5). This control has the following functions:

• Press it consecutively to scroll through the functions in clockwise direction.

• Press it to conrm the selected function.

• Turn it left or right to select cooking start times, cooking end times and to programme the alarm.

• Hold it down to change the clock operation to manual. Hold down the control button

(5) for 3 seconds until the LED

(4) goes out, and the stand-by mode is activated.

Press the control button (5) several times until the LED ashes

(5) until the hands of the clock are at the required time. The time can only be set if there are no alarms or cooking functions programmed. After adjusting the time on the clock, press the control button

(5), to conrm the selection.18 User’s Guide PROGRAMMING THE ALARM (TIMER) Press the control button (5) several times until the LED ashes

(5) until the hands of the clock are at the required time. After adjusting the alarm time on the clock, press the control button

(5) to activate it. If the alarm is not activated within 10 seconds of selecting the menu, it will be cancelled. If the alarm is active, the alarm symbol on the clock remains lit. Press and release the control button

(5) to display the programmed time of the alarm. The hands will indicate the time selected for the alarm for 2 seconds and then return to the current time. Press the control button

(5) for 2 seconds to cancel the programmed alarm. At most, the alarm can be set for up to 3 hours after the current time and at minimum, up to 2 minutes after the current time. The alarm activation is independent to the oven operation. It is only an acoustic signal. The oven does not turn off at the end of the timer period. This function can also be used while the oven is in use.

(5) several times until the LED

(1) ashes. Programme the cooking start time by turning the control button

(5), to the right or left. After adjusting the start time, press the control button

(5) to conrm the selection. If the selection is not conrmed within 10 seconds of selecting the menu, it will be cancelled. The cooking end time must be programmed after setting the start time, otherwise the cooking start time will be deleted. The cooking start time can be programmed for up to 12 hours after the current time. The cooking start time can only be programmed from 2 minutes after the current time.19 User’s Guide English Programming the Cooking Stop Time Press the control button (5) several times until the LED

(2) ashes. Programme the cooking stop time by turning the control button

(5), to the right or left. After setting the cooking stop time, press the control button

(5), to activate the cooking programme. If the selection is not activated within 10 seconds of selecting the menu, it will be cancelled. The cooking stop time can be programmed for up to 15 hours after the current time. The cooking stop time can only be programmed from 2 minutes after the current time. Programming Cooking Time and Cooking Stop Time For delayed start cooking, programme the cooking start and stop times in accordance with the instructions above. MANUAL OPERATION If no cooking times are programmed, the clock runs in manual mode. If a cooking programme is dened, to activate the manual mode, press the control button

(5) until the clock emits a buzzing sound. If the manual mode is active, any previous cooking programme is cancelled. When the clock is in manual mode, the oven is operative. If the oven is not going to be used, the oven function selection switch should be in the OFF position. In manual mode, the LED lights are off.

CANCELLATION OF THE BUZZER

At the end of the programmed cooking time, or when the pre-established alarm time is reached, a buzzer is heard. Press the control button

(5) to stop the buzzer. Otherwise, after a minute from the start of the buzzing sound, the buzzer will stop automatically.

(5) for three seconds to cancel the cooking programme or TIMER.20 User’s Guide Teka Hydroclean

function This function makes it easy to remove grease and other food debris that may have stuck to the sides of the oven. For easier cleaning, do not allow dirt to accu- mulate. Clean the oven frequently.

PROGRAMMING THE TEKA

FUNCTION WARNING Do not pour water into a hot oven as this can damage the enamel of the oven. Always run the cycle on a cold oven. The result could be affected and the varnish damaged if it is run when the oven is too hot. First remove the trays and all accessories from the oven interior, including the tray supports and telescopic guide rails. To do this, follow the instructions in the in- stallation and maintenance guide accom- panying the oven.

1. With the oven cold, spread a cloth out on

the bottom of the oven. INFORMATION For best results, add a teaspoon of mild washing up detergent to the glass of water before pouring onto the cloth

3. Turn the control dial to position

5. Programme a duration of 4 minutes on the

6. After 4 minutes, an alarm will sound and the

oven will stop heating.

7. Turn the control dial to position

8. Wait for about 20 minutes for the interior of

the oven to cool. IMPORTANT Do not open the oven until the cooling phase is complete. This is necessary for the Hydroclean® func- tion to work properly.

9. Any traces of dirt and excess water can now

be removed from the oven with the damp cloth. The Hydroclean

function takes place at a low temperature. However, cooling times can vary depending on the room temperature. WARNING Before touching the inside surface of the oven, make sure that it has cooled properly. If a deeper clean is required after using the Hy- droclean

function, use neutral detergents and non-abrasive sponges.

2. Gently pour 200 ml of water into the bottom