GBSM 150 - Grinder Güde - Free user manual and instructions

USER MANUAL GBSM 150 Güde

EU Declaration of Conformity

Starting-up the machine

Aligning the sanding belt

Changing the sanding belt

Changing the sanding belt

eight 90 kg Noise details Sound pressure level L

87 dB (A) Sound power level L

100 dB (A) Uncertainty K = 3 dB (A) Wear ear protectors! The numerical values given are emission levels and not necessarily safe working levels. Although there is a correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to determine whether or not any additional safety measures are necessary. The characteristics of the work space, other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are all factors that can in

oreover, the acceptable exposure levels can vary from country to country. This information should enable the machine‘s operator to carry out a better assessment of the risks and hazards. Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. Persons over 16 years of age can only workon the appliance.An exception includes youngsters trained in order to reachknowledge under supervision of the trainer duringoccupational education. In case of any doubts about connection and operati- on refer please to our customer center Specied Conditions Of Use This equipment is exclusively intended for surface processing and deburring wood or wood-like materi- als, as well as ferrous metals and non-ferrous metals, while taking the maximum sanding surface and safety regulations into consideration. The machine may only be used in a technically perfect condition and taking into account all safety information. Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages. It is strictly prohibited to disassemble, modify and purposely remove the protective equipment on the unit and t other protective equipment instead. Residual risks Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

• vibrations to hand and arms

• Danger of burns Tool and workpiece heat up during operation.

• Risk of injury Sharp tools and workpiece edges Emergency procedure Conduct a rst-aid procedure adequate to the injury and summon qualied medical attendance as quickly as pos- sible. Protect the injured person from further harm and calm them down. If you seek help,state the following pieces ofinformation: 1. Accident site, 2. Accident type,

3. Number of injured persons, 4. Injury type(s)

Symbols WARNING/CAUTION! Warning against thrown-o items Warning against dangerous electric voltage Keep distance of persons Observe to keep out of dangerous zone WARNING - Read the operating instruc- tions to reduce the risk of injury. Unplug the machine before any work on it. Wear eye protective goggles ! Wear ear protectors! Wear a suitable dust protection mask. Safety shoes to be usedD

ENGLISH Use appropriate lifting equipment for transportation. The load must be balanced. Do not touch the sanding belt while the machine is running! Keep dry at all times. Never expose tool to rain. Always keep children and unauthorised persons out of reach of the appliance. Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres. Class II tool. CE marking General safety information WARNING! When using electric tools the following general sa- fety instructions must be obeyed to protect yourself from electric shocks, injury and re risks. Read all these instructions before using this electric tool and keep the safety instruction in a safe place. Keep your work area clean and tidy. Untidy work

places and workbenches increase the risk of accidents and injur ies. Do not expose the appliance to rain and do not use it in wet or moisture conditions. Provide adequate lighting or good lighting condi

tions when working with the machine.

o not work with electric tools in conditions with ammable liquids, gases or dust. Electric tools produ- ce sparks able to ignite dust or fumes.

rotect yourself from electric shock. Avoid body contact with earthed objects (for example pipes , radiators, electric stoves and cooling units). There is an increased risk of electric shock if your body is earthed. Keep children and bystanders away while ope- rating a power tool. Do not touch the electric tool or the cable . When not concentrated, you may lose control over the machine. Ensure that you store electric tools in a safe place. Tools which are not in used must be stored in a dry place as high as possible out of the reach of children or in an inaccessible place. Do not overload the machine. Use appropriate electric tools for your work. Working with approp

riate electric tools is better and safer when within the sp ecied power range. They will work better and more safely in the specied power range. Do not use the electric tool for purposes for which it is not designed. For example, do not use a manual circular saw for cutting branches or logs. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothingand gloves away from moving parts. We recommend that you wear non-slip shoes when working outdoors. Wear a hairnet if you have long hair. Use protective equipment which t you. Wear safety goggles and ear protection at all times. A dust mask or respirator is also required. Wear tight-tting gloves at all times when handling sharp blades and saw blades. If dust exhausters and catchers are to be installed, make sure they are tted and used properly. Using a dust exhauster may reduce the exposure to dust. Do not use the cable in conict with its designa

tion, to carry or hang electric tools or to pull the plug out of so cket. Protect the cable against high temperatures, oil, sharp edges or moving parts of the machine. Damaged or entangled cables increase the risk of electric shock. Avoid any abnormal body posture. Provide good stability and keep balance at all times. By this, electric tools are better controlled in unexpected situations. Treat electric tools carefully. Check whether the moving parts work perfectly and do not drag, whether not broken or damaged to such an extent that functioning of electric tools could be aected. Have any damaged parts repaired before using the machine. Poor maintenance of electric tools is a cause of many injuries. Keep the cutting tools sharp and clean. Carefully treated cutting tools with sharp edges get stuck less often and are easier to guide. Follow the instructions for lubricating and chan

heck the connection cable on the electric tool at regular intervals and have it replaced by an expert if it is damaged. Check the extension cables at regular intervals and replace them if they are damaged. Keep the handles dry, clean and free of oil and grease. Pull the plug out of the socket and/or remove the battery when the tool is not in use before you make machine settings or change accessories, such as the saw blade, drill bit or cutter. This safety measure prevents unintentional starting of the electric tool. Before starting any electric tool, remove any adjusting wrenches and screwdrivers. A tool or a wrench present in the rotating part of the machine may lead to injuries. Prevent the machine from unintentional starting. Before plugging and/or connecting the machine to battery, handling or carrying, make sure the electric tools are switched o. Having a nger on the switch when carrying the electric tool or when the machine is on when plugging it may lead to injuries.D

ENGLISH DEGB If you wish to work outdoors with an electric tool, only use extension cables which are approved for outdoor use and are marked accordingly. Using an extension cable suitable for outdoor use reduces the risk of electric shock. Be careful, pay attention to what you are doing and use common sense when working with electric tools. Do not use electric tools when you are tired or under the inuence of drugs, alcohol or pharmaceuticals. A moment if inattention when using electric tools may lead to serious injuries. Check the machine for any damage:. Before using the equipment again, the protective equipment must carefully be checked if safe and working as designated. Check the moving parts for perfect functioning, if working smoothly and if no parts are damaged. To provide safe operation of the equipment, all parts must be installed properly and meet all conditions. Damaged protective equipment and parts must be professionally repaired or replaced by a recognised professional workshop, unless otherwise specied in the Operating Instructions. Do not use electric tools with a defective switch. An electric tool that cannot be switched on or o is dangerous and must be repaired. Damaged switches must be replaced in a customer service workshop. Have your electric tool repaired by an electrician. This electric tools complies with the relevant safety regulations. Repairs may only be carried out by an electrician using genuine spare parts; otherwise the user may suer accidents. WARNING The use of other tools and other accessories may pose an injury risk for you. Risk of injury! Keep body parts and clothes away from rotating parts of the device. The machine must be secured to the oor using suitable screws since otherwise there is a risk that it will tip over. In the event of a blockage, switch o the machine immediately. Pull out the mains plug and remove the jammed workpiece. Chips and splinters must not be removed while the machine is running. Mains Connection Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA). Connect only to a single-phase AC current supply and only to the mains voltage specied on the rating plate. Must only be used from sockets with earth wire. Only plug-in when machine is switched o. Maintenance Unplug the machine before any work on it. Carry out a visual inspection before switching the appliance on. The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts. Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualied person to avoid danger. Repairs and works specied in these Instructions may only be performed by qualied authorised sta. Use only original accessories and original spare parts. Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Do not clean the plastics with solvents, ammable or toxic uids. For cleaning, use a damp cloth only. Apply environment-friendly oil to all moving parts. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insucient mainte

nance and care can lead to unforeseen accidents and injur ies. If necessary, a list of spare parts can be found at www.guede.com. Guarantee Warranty period of 12 months applies to commercial use and 24 months applies to private use and com- mences on the day of purchase of the device. The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be sub- mitted for any claim in the guarantee period.

he guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the ope- rating and assembly instructions and common wear

e also not included in the guarantee. Important information for the customer Please be sure to know that returning the product in or after the warranty period must be made in the original packaging. Service Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureau- cracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Tel.: +49 (0) 79 04 / 700-360 Fax: +49 (0) 79 04 / 700-51999 E-Mail: support@ts.guede.comD