DF1136WEVV - Freezer Profilo - Free user manual and instructions

USER MANUAL DF1136WEVV Profilo

4.3 CmHa Ha easy opening handle 11

4.3.1 Cbaine Ha easy opening handle 11
4.3.2 MoHTIpaHe Ha easy opening handle 11

4.4 CmHa Ha rohpata nHa Ta H BpaTata 12

4.4.1 CbaJIHe Ha naHTata Ha BpaTata. 12
4.4.2 MoHTpaHHe Ha nHaTata Ha BpaTata 14

4.5 CmHa Ha roHaTa nHa Ta HbPaTa (BpTa c dncnnei) 15

4.5.1 CbaJIHe Ha nHTaTa Ha BpaTata 16
4.5.2 MoHTpaHa Ha nAHTaHa HbPaTaTa 17

4.6 CmHa Ha DonHaTa NaHTa Ha BpaTaTa 18

4.6.1 CMHa Ha donHaTa nHa Ta HbPaTaTa. 18
4.6.2 MoHTIpaHe Ha donHaTa nHaTb Ha BpaTaTa 19

4.7 CmHa Ha paTa 20

4.7.1 ⅢBaKaDaHe Ha paΦTa 20
4.7.2 MoHTnpaHe Ha paTbTa 20

4.8 CMHa Ha KOHTeHepa 3a 3amaeHN XpaHInTeJHH npOyKTH 21

4.8.1 3BaXdaHe Ha KOHTeHepa3aMPa3EH XpaHHTENn npOyKTn... 21
4.8.2 MoHTnpaHe Ha KOHTeHepa 3a 3ampa3EH XpaHHTeHN npOdykTN 21

4.9 CmHa Ha neDoreHepaTopa 22

4.9.1 3BaJdaHe HaJeDoreHepaTopa 22
4.9.2 MoHTIpaHHe HaJeDoreHepaTopa 22

4.10 CmHa Ha LED oCBetJeHHeTo otrope 23

4.10.1 CbAHe Ha LED ocBeTneHnETo 23
4.10.2 MoHTpaHe Ha LED ocBETnHHeTo OTrope 24

OTHOCHO To3n DokyMeHT

1.1 Baxha nHΦopMaζη

1.1.1 Uen

TeHc cBbETn 3a pEmOH T NOMarat Ha Ntpe6nTEnla DpemOHtnpa Cam ypei B cbOTBeTCTBnC pernameHTa 3a ekONOrOcb6paHO npoeKtnpaHe Ha ypeiTe (OT03.2021 r.).

Te cbdpkataHfOpmaIaKaJa cMaHeTpeOnpeIeHn pe3epBn qactN, BKIOHTENHO pnpynpeJedHn n PNCKOB.

Ako IMATE HRAKAKINBbnpoM,MOJIa CbIpKeTe Ce c HAUNO OTdEe 3a OBCNYBAHe Ha KIMENTH. Hne HOCIM OTTOBOPHOCT 3a UETN, CAMO AKO CbBeNTe 3a peMOHT ca cna3eHN npabInHo.

1.2 06aCHeHne Ha cHMBOJInTe

1.2.1 HnBa Ha onaCHOCT

IpeynpeintenHnBaCe cBcTOrT OT CmBOJ nCnHaHa Dyma.CnrHaHaTa yMa noka3Ba cepno3HOCTTA Ha onaCHOCTTA.

Ниво на п dedурждени 3начени
ОПАСHОCT	Еспаразы新股у на п dedурждени.TО сбоб Shedени по Смьт ини сернони наразяваим.
ПРEDУПЕЖДЕНЕ	Еспаразы新股у на п dedурждени.TOTСбоб Shedени по Смьт ини сернони наразяваим.
ВИМATEЛНО	Еспаразы新股у на п dedурждени.TOTСбob Shedени по Смьт ини наразяваим.
ВИМАМЕЛ	Еспаразы新股у на п dedурждени.TOTСбob Shedени по Смьт ини смьз. БЕТВЕНI.YE.TN.

Tabuua 1: Hua Ha onachocm

1.2.2 Cnmbon3a onachoct

CIMBOHTE3aONACHOCTCa CIMBOHNUH N3o6paXeHNA, KOHTO DaBaT INDINKAUHA 3a BnDa ONACHOCT.

BTo3n DOKyMeHCTe H3N013BaT CNEdHInTe CMBOIN 3a OnaCHOCT:

4.2 CMHa Ha ApbXkata Ha BpaTata

Cneunannn HNCTpyMeHTN:

HakpainHK Torx TX20 6,3 MM (1/4") [00340865]
NnockaOTBepTkaBpbx10MMX1,6MMX200MM

N3nCKBaHe:

YpeIbTe n3KNIOueH OTo 3aXpaHbAHeTo.
BpataTa e oTBopeHa

4.2.1 N3BaXdaHe Ha dpbXkata Ha BpataTa

1.CbaneteDbeteKaanaKHaBnHTOBete(1).
2. Pa3BnIte DBaTa BnHTa (2).
3.CBaIeTe Dpbkkata Ha BpaTata (3).

ДрьжкагаHa BpataTa e CBaneHa.

4.2.2 MoHTnpaHn Ha dpbXkata Ha BpTaTAt

MoHTnpaIteB06paTeH peI.

PemOH

4.3 Cmha Ha easy opening handle

CneuaJIHHHHTpymeHTn:

Kpbctata oTBeptka PH2

N3nCKBaHe:

YpeBt E n3KIOUeH OT 3aXpaHbAHeTO.
BpaTaTa e oTbopeHa.

4.3.1 CbJIHe Ha easy opening handle

1. Cibanete kanaeTo Ha easy opening handle (1).
2. Pa3BnIe DaBaTa BnHTa (2).

Easy opening handle e cbaneHa.

4.3.2 MoNTIpaHHe Ha easy opening handle

Mexaan3mbt Ha easy opening handle Tp6ba Da 6bde npabnHn Hactpoen npenMOHTaKa.
PpabnHTo paaonooKeHHe ha 6ytaHnHa PpBT (1), Ha3b6eHnTe KaanpaTn (2) (3), npyKnHata (4) n orpaHnHnten (5) 3a MoHTax Ha BpTaTaTAt OtnBa e noKa3aHO Ha padkNata.

MoHTnpaTBeB6paTeHpei.

PemOH

4.4 CmHa Ha rohata naHt ha BpaTaTa

Cneunannn HNCTpyMeHTN:

HakpaimHK Torx TX20 6,3 MM (1/4") [00340865]

IPEADYNPEXDEHNE

Teekn, o6emncTuypeu!

PpnnnB3BaHe Ha HkNoHEn ypeN!

KocTHnΦpaKtypn/HapaHraBaHmO TnpMa3BaHe

YkpeneTe ypeuTE cpeuy npnnB3BaHe.

BHMMATEIHO

Pnck OT nadaun yactn nopadn pa3xna6eHN BnHTOBe!

HpaHbHe npaPi napaun Yactn
3akpenete KOMnoHeHTa, Taka He da He naHe.

BHIMAHHEI

Pnck OT nadaun yactn nopadn pa3xna6eHN BnHTOBe!

IobpeHa HpyrHuactn Ha ypeHa NmB Doma Ha KHeHTa, HAp. DbHO

TC

3akpenTe KOmnoHEHTa, Taka Ye Da He naHe.

N3nCKBaHe:

YpeBt en3KIOueHOT 3axpaHbHeTo.
BbtpseHHNTe pHTNHn Ha ypeDa ca OTcTaPHeHn.

4.4.1 CbanyHe Ha naHTata Ha BpataTa

PemOH

1. NocTabete ypea Jernan Ha 3aHaTa cn Ctpana.

2.1.HaTnCHeteKanaHcTeHa rOpHaTa naHTa ot DBeTe cTpahn (1).

1. N3BaJeTe KanaeTo Ha roPHaTa naHTa (2).
2. CbaneTe kanaeTo Ha rohpHaTa naHTa (3).

PemOH

3.1.PaBmTeDbTaBNHTa(1).

1. Cbane teropnata naHTa (2).

Tophata naHTa Ha BpaTata e CBaneHa.
4.4.2 MoHTnpaHe Ha naHTaTa Ha BpaTaTa
MOnTpaaTeB06paTeHpeJ.

PemOH

4.5CMHaHa rohpHata naHTa Ha Bpata (Bpata c dncnnei)

Cneunannn HNCTpyMeHTN:

HakpaHHK Torx TX20 6,3 MM (1/4") [00340865]

PDEUYPEKDEHNE

Texk, o6emnctuypei!

MoHTpaTBeB6paTeHpei.

PemOH

4.6 CmHa Ha donHaTa naHTa Ha BpaTaTa

Cneunannn HNCTpyMeHTN:

HakpaHHK Torx TX20 6,3 MM (1/4") [00340865]

PDEYPNPEXDEHNE

Teekn, o6emncTuypeu!

MOHTnpaTeB06paTeH peI.

PemOH

4.8 CMraHa Ha KOHTeHepa 3a 3aMpa3eHN XpaHITeHN npOdykTN

N3nCKBaHe:
BpaTaTa e oTBopeHa.

4.8.1 ⅢBaKaJaHe Na KOHTeHepa 3a 3ampa3eHn XpaHNTeHn IpoJyKTH

1. 13bpnaTe DOKpaI KOHTeHepa 3a 3ampa3EH xpaHTENH npOyKTN (1). 2. 13baTe KOHTeHepa 3a 3ampa3EH xpaHTENH npOyKTN (2).

KohteHepb3a3aMPa3eHNxpaHHTeHHnpOdykTe nEINBaDHe.

4.8.2 MoHTnpaHe Ha KOHTeHepa 3a 3ampaehn XpaHHTEN npOdykTN

MoHTnpaTBeBopateHpeJ.

PemOH

4.9 CmHa Ha JeDoTeHepaTopa

M3nCKBaHe:
BpaTaTa e oTbopeHa.

4.9.1 N3BaxDaHe Ha neDorehepatopa

1. Ⅰидьраиме рафта с ковтугеля за замралених раннітейни поюкten и лесorehepopatoga (1).
   2.OcbobodeTe Kyknte (2).
   3.ИЗва对接псдorehepaTopa(3).

JeDoreHepaTope n3BaDeH.

4.9.2 MoHTnpaHe HaJeIeOreHepaTopa

MoHTnpaTBeB0paTeHpeI.

PemOH

4.10 CMraHa HA LED oCBetneHneTo otrope

CneuaJIHHHnCTpymeHTN:

NnockaOTBeptKaBpbx2,4MMX0,4MMX60MM,B KOMPnEeTa[00341820]

BaWnAT ype n cHa6dene C LED ocBtneHme, KoTe He H3NcKbNa oI- DpBkKa. Toba ocBtneHme MOKe Da 6bJe peMOHTnpaHO CaMo O T CneuHaNCTU ot cnykbaTa 3a 06cnykBaHe Ha KIneHTn NnO T KbAnFncPapn TexHnui!

ONACHOCT

PmckcTOKOByadnapoiaactnnoHanpexkHei? OAnocho3A JxWBOTA TO kOByAD yCBuHAY HENHPB

EeKtPrVcTeNtCeAteTn TpRbBa da ce pEmOHnPaT o KBAIINHnPnH aHn EeKToTeXHn.
CnepemoHTA Tp8Ba 1a Ce n3bBpiN npOBepKa 3a 6e30NaCHOCTcRlachO VDE 0701 mnn B cBtBeTCTBHe CbC cneunHnHnTe 3a cTpaHATA paope6n

ONACHOCT

Pnck OT TKOB ydap nopadH qactn noHnpeXeHHe!

CmbptOT TOKOB ydap

N3KNUOYE ypeIne O t eENKPTHcNECKOTo 3axpaHbAhe noe 60 ceKHynnpEa3noaBaHa He pMeHTA.

BHIMATEJIHO

Octpn pb6oBe!

HapaHbHaMOnTnnp3BaHe

Hocete npedna3n pbkabu.

N3nCKBaHe:

YpeBt E N3KIOUeH OT 3axpaHbAHeTO.
BpaTata e OTbopeha
TopHnTe BbTpewHnФmTNHn Ce OToCTpaHBAt.

4.10.1 CbajnHe Ha LED ocBtJeHneTo

1. Ppemectete LED ocBETneHneto HnABO.

CbpbbaHTo KbEm ENEKtpnueckaT Mpeka H LED OCBETneHHeTo e npekbcHATO.

2.Ocbo6oTe KyKte HaLEDocBeTneHMeTo.

PemOH

3.CBaIeTeLEDocBETHeHnETo，pNIMBKBaIKnroHanpei.

LEDOCBETHeHMeToeCBaneHo.
4.10.2 MoHTnpaHe Ha LED ocBETneHnTo OTrope
MOHTnpaTBeBobpaTeHpeI.

4.3 Zamjena rucke easy opening handle 34

4.3.1 Uklanjanje rucee easy opening handle 34
4.3.2 Postavljanje ruche easy opening handle 34

4.4 Zamjena gornjeg zgloba vrata 35

4.4.1 Uklanjanje zgloba vrata 35
4.4.2 Postavljanje zgloba vrata 37

4.3 Vymena Easy opening handle 56

4.3.1 Vyjmuti Easy opening handle 56
4.3.2 Montáz Easy opening handle 56

4.4 Vymena horniho zavesu dvirek 57

4.3 Vymena Easy opening handle

Speziální nástroje:

Sorg for at sikre apparater mod at glide.

PASPAI

Fare for nedfaldende deleg pga. Iosnede skruer!

ronskade pga.nedfaldende del
Sorg for at sikre componenten mod at falde ned.

BEM/ERK!

Fare for nedfaldende deleg pga. Iosnede skruer!

Sarg for at sikre componenten mod at falde ned.

Preindstilling:

Sorg for at sikre apparater mod at glide.

PAS PAI

Fare for nedfaldende deleg pga. Iosnedeskruer!

rsonskade pga. nedfaldende dele

Sorg for at sikre componenten mod at falde ned.

BEM/ERK!

Fare for nedfaldende dele pga. Iosnede skruer!

Sorg for at sikre componenten mod at falde ned.

FARE

Sorg for at sikre apparater mod at glide.

PASPAI

Fare for nedfaldende deleg pga. Iosnedeskruer!
Ronskade pga, nedfaldende dele
Sorg for at sikre componenten mod at falde ned.

BEM/ERK!

Fare for nedfaldende dele pga. Iosnede skruer!

Sorg for at sikre componenten mod at falde ned.

Preindstilling:

Repair hints - Freezer

1 Concerning this document. 116

1.1 Important information 116

1.1.1 Purpose 116
1.2 Explanation of symbols 116
1.2.1 Danger levels.. 116
1.2.2 Hazard symbols 116
1.2.3 Structure of the warnings 117
1.2.4 General symbols 117

Safety. 118

2.1 General Safety instructions 118

2.1.1 All domestic appliances 118

Tools and aids. 119

Repair 120

4.3 Replacing easy opening handle 124

4.3.1 Removing easy opening handle 124
4.3.2 Installing easy opening handle 124

4.4 Replacing door upper hinge 125

4.5 Replacing door upper hinge (door with display) 128

4.7 Replacing shelf. 133

4.7.1 Removing shelf 133
4.7.2 Installing shelf 133

4.8 Replacing frozen food container 134

4.8.1 Removing frozen food container 134
4.8.2 Installing frozen food container 134

4.9 Replacing ice maker 135

4.9.1 Removing ice maker 135
4.9.2 Installing ice maker 135

4.10 Replacing LED top light 136

4.10.1 Removing LED light. 136
4.10.2 Installing top LED light 137

Concerning this document

1.1 Important information

1.1.1 Purpose

These repair hints support consumer to repair appliances by himself according to the applicable eco-design regulation (as of 03/2021).

They contain information how to exchange defined spare parts including warnings and risks.

In case of questions, please contact our customer service. We will only be liable for damages if the repair hints have been followed properly.

1.2 Explanation of symbols

1.2.1 Danger levels

The warning levels consist of a symbol and a signal word. The signal word indicates the severity of the danger.

Table 1: Danger levels

Warning level Meaning
Danger	Non-observation of the warning message will result in death or serious injuries.
Warning	Non-observation of the warning message could result in death or serious injuries.
Caution	Non-observation of the warning message could result in minor injuries.
Notice	Non-observation of the warning message could result in damage to property.

1.2.2 Hazard symbols

Hazard symbols are symbolic representations which give an indication of the kind of danger.

The following hazard symbols are used in this document:

Hazard symbol Meaning
!	General warning message
	Danger from electrical voltage
	Risk of explosion
	Danger of cuts
	Danger of crushing

Concerning this document

Hazard symbol Meaning
	Danger from hot surfaces
	Danger from strong magnetic field
	Danger from non-ionizing radiation

Table 2: Hazard symbols

1.2.3 Structure of the warnings

Warnings in this document have a standardised appearance and a standardised structure.

Danger

Type and source of danger!

Possible consequences of ignoring the danger / warning.

Measures and prohibitions for preventing the danger.

The following example shows a warning that warns against electric shock due to live parts. The measure for avoiding the danger is mentioned.

Danger

Risk of electric shock due to live parts!

Death by electrocution

• Disconnect appliances from electrical supply at least 60 seconds before disconnecting repairs.

1.2.4 General symbols

The following general symbols are used in this document:

Gen. symbol Meaning
1	Identification of a special tip (text and/or graphic)
i	Identification of a simple tip (only text)
	Identification of a link to a video tutorial

Gen. symbol Meaning
	Identification of required tools
	Identification of required preconditions
	Identification of a condition (if ..., then ...)
	Identification of a result
[Start]Identification of a key or button
[00123456] Identification of a material number
Status Identification of displayed text / window(in the appliance's display)

Table 3: General symbols

Safety

2.1 General Safety instructions

2.1.1 All domestic appliances

Risk of electric shock due to live parts!

Errors by repairs involving electrical components can lead to electrical shock!
- Disconnect the appliance from the mains for at least 60 seconds before starting work.
After the repair have a safety test according VDE 0701 or country-specific regulations performed.

Risk of injury from sharp edges!

Wear protective gloves.

Risk of crushing during repair, maintenance, troubleshooting and service due to heavy and moving components

Wear protective shoes.
- Secure heavy components from falling down.
- Do not stick body parts into moving components.

Risk to the appliance's safety / function!
Only use original spare parts.

Risk of damage to electrostatically sensitive components (ESDs)!
- Do not touch the modules, including connections and conductor paths.

Tools and aids

Designation Details Images
Protection cloth [00342013]	60 cm x 50 cm	###
Phillips screwdriver PH2
Torr Bit TX20 [00340865]	6.3 mm (1/4")
Slotted screwdriver	Blade 2.4 mm x 0.4 mm x 60 mm, in the kit [00341820]	①

Prerequisite:
Door is open.

1. Release door gasket from the groove on right and left corner.

1. Pull out door gasket from groove.

Door gasket is removed.

	Thickness of new door gasket may deviate slightly from thickness of old door gasket. This will not affect closing behavior and long-term function.
	If your appliance has adjustable hinges or hinge attachments, you can optimize the closing behavior subsequently.
	Small side holes in door gasket are functional (required for ventilation). These are not production faults.

Repair

1. Check groove for gasket for damage.

1. If groove for gasket is it is damaged.
2. Contact customer service.
3. Slight deformation of door gasket is normal and does not affect its function. It is recommended to straighten door gasket before inserting it into appliance.

Heat door gasket with a hair dryer or hot water and manually reshape it.

1. Push corners of gasket at the top and bottom to the groove.

Repair

1. Press whole gasket step by step into the groove.

Door gasket is installed.

Slotted screwdriver Blade 10 mm x 1.6 mm x 200 mm

Prerequisite:

Appliance is disconnected from power supply.
Door is open.

4.2.1 Removing door handle

1. Remove two screw caps (1).

2. Unscrew two screws (2).

3. Remove door handle (3).

Door handle is removed.

Install in reverse order.

Repair

4.3 Replacing easy opening handle

Required tools:

Phillips screwdriver PH2
Prerequisite:
Appliance is disconnected from power supply.
Door is open.

4.3.1 Removing easy opening handle

1. Remove easy opening handle cover (1).
2. Unscrew two screws (2).

Easy opening handle is removed.

4.3.2 Installing easy opening handle

Install in reverse order.

Repair

4.4 Replacing door upper hinge

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Heavy, bulky appliances!

Back and muscle injuries

Appliance door removal operation should only be carried out by
trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment.

Sharp edges!

Cut injuries

Wear protective gloves.

Slipping of tilted appliances!

Bone fractures / crush injuries

• Secure appliances against slipping

Risk of falling parts due to released screws!

ury because of falling parts.
- Secure component from falling down.

Notice

Risk of falling parts due to released screws!

Damage to other parts of the appliance or at customers home e.g. bot

tom.

• Secure component from falling down.

Prerequisite:

Appliance is disconnected from power supply.
Appliance interior fittings are removed.

1. Place appliance on the back side.

1. 1. Press upper hinge cover on both sides (1).

2. Move out upper hinge cover (2).

3. Remove upper hinge cover (3).

Repair

3.1. Unscrew two screws (1).

1. Remove upper hinge (2).

Door upper hinge is removed.
4.4.2 Installing door hinge
Install in reverse order.

Repair

4.5 Replacing door upper hinge (door with display)

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Warning

Heavy, bulky appliances!

Back and muscle injuries

• Appliance door removal operation should only be carried out by trained specialists.
  To move the appliance, two people are required.

Use only suitable tools and equipment.

Caution

Sharp edges!

Cut injuries

Wear protective gloves.

Warning

Slipping of tilted appliances!

Bone fractures / crush injuries

Secure appliances against slipping

Caution

Risk of falling parts due to released screws!

ury because of falling parts.

• Secure component from falling down.

Notice

Risk of falling parts due to released screws!

Damage to other parts of the appliance or at customers home e.g. bot

tom.

• Secure component from falling down.

Danger

Risk of electric shock due to live parts!

Danger to life through electric shock in case of improper repair

Electric parts should be repaired by a qualified electricians.

After the repair have a safety test according VDE 0701 or country-specific regulations performed.

Danger

Risk of electric shock due to live parts!

Death by electrocution

• Disconnect appliances from electrical supply at least 60 seconds before starting repairs.

Prerequisite:

Appliance is disconnected from power supply.
Appliance interior fittings are removed.

Repair

1. Place appliance on the back side.

Repair

2.1. Press upper hinge cover on both sides (1).
2. Move out upper hinge cover (2).
3. Remove upper hinge cover (3).

3.1. Remove cable box cover (1) 2. Remove cable protection (2)
3. Disconnect electrical connection (3).
4. Unscrew two screws (4)
5. Remove upper hinge (5).

Door upper hinge is removed.

Install in reverse order.

Repair

4.6 Replacing door lower hinge

Required tools:

Torx Bit TX20 6,3 mm (1/4") [00340865]

Prerequisite:

Appliance is disconnected from power supply.
Appliance interior fittings are removed.
Appliance is placed on the back side.

Upper hinge is removed. Page 128

4.6.1 Replacing door lower hinge

1. Remove door.

2.1. Unscrew the screw (1).

1. Turn lower hinge out (2).
2. Remove lower hinge (3).

Lower hinge is removed.

Repair

Install in reverse order.

Repair

4.7 Replacing shelf

Prerequisite:
Door is open.

4.7.1 Removing shelf

Pull out shelf.

Shelf is removed.

4.7.2 Installing shelf

Install in reverse order.

Repair

4.8 Replacing frozen food container

Prerequisite:
Door is open.

4.8.1 Removing frozen food container

1. Pull out frozen food container all the way (1). 2. Remove frozen food container (2).

Frozen food container is removed.

4.8.2 Installing frozen food container

Install in reverse order.

Repair

4.9 Replacing ice maker

Prerequisite:
Door is open.

4.9.1 Removing ice maker

1. Pull out shelf frozen food container with ice maker (1).
2. Release hooks (2).
3. Remove ice maker (3).

Ice maker is removed.

4.9.2 Installing ice maker

Install in reverse order.

Repair

4.10 Replacing LED top light

Required tools:

Slotted screwdriver Blade 2.4 mm x 0.4 mm x 60 mm, in the kit [00341820]

Your appliance features a maintenance-free LB

These lights may be repaired by customer service or authorised technicians only!

Danger

Risk of electric shock due to live parts!

Danger to life through electric shock in case of improper repair

Electric parts should be repaired by a qualified electricians.

After the repair have a safety test according VDE 0701 or country

specific regulations performed.

Danger

Risk of electric shock due to live parts!

Death by electrocution

• Disconnect appliances from electrical supply at least 60 seconds

before starting repairs.

Caution

Sharp edges!

Cut injuries

Wear protective gloves.

Prerequisite:

Appliance is disconnected from power supply.
Door is open.
Upper interior fittings are removed.

4.10.1 Removing LED light

1. Move the LED light to the left side.

LED light electrical connection is disconnected.

1. Release LED light hooks.

Repair

1. Remove LED light moving it forward.

LED light is removed.

4.10.2 Installing top LED light

Install in reverse order.

Remonditeave - Sögavkülmik

1 Selle dokumendiga seoses 139

1.1 Tahtis teave 139

1.1.1 Eesmark 139
1.2 Sumbolite selgitus 139
1.2.1 Ohutasemed 139
1.2.2 Ohusumbolid 139
1.2.3 Hoiatuste struktuur 140
1.2.4 Üldised sumbolid 140

Ohutus. 141

2.1 Uldised ohutusiuhised 141
2.1.1 Kofik kodumasinad 141

Tabel 1: Ohutasedmed

1.2.2 Ohusumbolid

m = 311

Mun Torx TX20 6.3 mm (1/4") [00340865]

PIIaekKaatQaiiAeTlIda10mmx1,6mmx200mm

PouTóeση:

HouokekunivataoosuvdeevnantnoTnympoxhTpofooofaac
H tripta elva aoivxtn.

4.2.1 Aqaipeoan aBnns tropras

1. ApaipoeTe Ta duo TiumuTa BiOa (1).
2. 3εβδωτε δύο βίδες (2).
   3.ApaipoeTnAaBnTns npra3

HaaBnTnTPOpTaEeαapapeBcI.

4.2.2 ToTtoBéTnO nαβns nóptas

Eykataaotne me nny avtieetn oipa.

EMIOKEUN

4.3 AvtikataoTaon esy open (eukolia avojmuotos)

Eioka Bonntika pεσα:

Karaoβi Phillips PH2
PouTRO8eGn:
H ouakeun evai aonouvdeevn an to nV npoxn npofooiaac
H Tropia eiva aoixn.

4.3.1 Aqapieon aβns easy open

1. Apaipeote to kaiumu tns aqeneasy open (1).
2. 3εβδωστε δύο βίδες (2).

Hλaβh easy open × αφαepeθεi.

4.3.2 ToTtoTeTnO nAβns easy open

O unxavioic aic easy open pnte va exei puoiote ootata npiv ano Tny eKATAOaon. H O wO tTOOTeTn Tc wOtnpiaoc pabou (1), Tuv oOvovTuW TUNATUv (2) kai (3), Tou EAATNIPOI (4) kai TOU TEQUATIKOU OTOT (5) ia tvTOOTeTn OMTV APTEPN TAEUPA TNC TIOPTAC EmuviCtai ONTy EIKOV.

H totoBtgnon Tuv emiupoc oioxieuov n5 aigc easy open yia tvn totoBtgnon otn deigia tleupa nTropias tiypipapetai oTo Eyypao OOnyivouapolanyan6.

ETIOKEu

4.3 Inlocuirea easy opening handle 418

4.3.1 Demontarea easy opening handle 418
4.3.2 Montarea easy opening handle 418

4.4 Inlocuirea balamalei de sus a usii 419

4.4.1 Demontarea balamalei usii 419
4.4.2 Montarea balamalei usii 421

4.5 Inlocuirea balamalei de sus a uii (usau afisaj) 422

4.5.1 Demontarea balamalei uii 423
4.5.2 Montarea balamalei usii 424

4.6 Inlocuirea balamalei de jos a uui 425

4.6.1 Inlocuirea balamalei de jos a uui 425
4.6.2 Montarea balamalei de jos a ušii 426

Cap torx TX20 6.3 mm (1/4") [00340865]

Surubelinita platá Lama de 10 mm x 1,6 mm x 200 mm

Cerintă:

4.3 Inlocuirea easy opening handle

Scule speciale:

Surubelinita Phillips PH2
Cerinta:
Aparatul este deconnectat de la sursa de energia electrica.
Usa estedeschisa.

4.3.1 Demontarea easy opening handle

1. Scoateti easy opening handle (1).
2. Desurubati doua suruburi (2).

Cap torx TX20 6.3 mm (1/4") [00340865]

AVERTISMENT

Aparate grele, masive!

Accidentarea spatelui si leziuni musculare

Cap torx TX20 6.3 mm (1/4") [00340865]

AVERTISMENT

Aparate grele, masive!

Accidentarea spatelui si leziuni musculare

4.3 Vymena uchytky easy opening handle 441

4.3.1 Odoberanie uchytky easy opening handle 441
4.3.2 Montazuchtyk easy opening handle 441

4.4 Vymena horného zavesu dveri 442

4.4.1 Odoberanie zavesu dvierok 442
4.4.2 Montaz zavesu dvierok 444

4.3 Vymena uchytky easy opening handle

Spezialne nastroje:

4.3 Byta Easy opening handle 509

4.3.1 Ta bort Easy opening handle 509
4.3.2 Montera Easy opening handle 509

1. Tryck in hela packningen i sparet bit for bit.

4.3 Byta Easy opening handle

Nödvändiga verktyg:

Phillips-skruvmejsel PH2

Forutsättning:

Apparaten ar bortkopplad fran stromforsorjning.
Dörren ar öppen.

4.3.1 Ta bort Easy opening handle

1. Ta bort skyddet for Easy opening handle (1).
2. Skruva ur de tvá skruvarna (2).

Easy opening handle har tagits bort.

4.3.2 Montera Easy opening handle