TASKalfa Pro 15000c - Printer KYOCERA - Free user manual and instructions

USER MANUAL TASKalfa Pro 15000c KYOCERA

Line drawing of a medical or laboratory setup with equipment and a blue upward arrow overlay (no text or symbols)

Préface

A1 A1 A4-A9 A1-A3 A10-A13

Programme Energy Star (ENERGY STAR®) 1-13

Command Center RX 3-45

Notification/Rapport 15-30

Imprimer rapport/liste 15-30

Envoyer/Stocker 15-45

E-mail 15-45

Nbre copies/impress. 16-46

17 Maintenance 17-1

Maintenance ordinaire 17-2

Card Authentication Kit (B) Operation Guide

Data Security Kit (E) Operation Guide

Copyright (c) 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (https://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([e-mail])"
   The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.

11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).

12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Knopflerfish License

This product includes software developed by the Knopflerfish Project. https://www.knopflerfish.org

Copyright 2003-2010 The Knopflerfish Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the KNOPFLERFISH project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache License (Version 2.0)

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

1. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
2. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
3. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a) You must give any other recipients of the Work or Derivative Works a copy of this License; and
(b) You must cause any modified files to carry prominent notices stating that You changed the files; and
(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and
(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

1. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
2. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
3. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
4. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
5. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Programme Energy Star (ENERGY STAR®)

Diagram of a printer with labeled parts showing front, side, and internal components in Chinese

Copper Battery Internal Resource Internal Resource

Back to the Internet Google Facebook Google+

Balayage

Diagram of a printer system with labeled components including a monitor, printer, and paper roll, showing directional arrows.

Diagram of a digital printing machine with labeled components and directional indicators

Close-up of a printer's internal structure with labeled parts (1 and 2), showing paper sheet and mechanical components without any readable text or symbols.

Technical diagram of a mechanical clamp or bracket with labeled parts 1 and 2, showing structural components and mounting points.

Technical diagram of a mechanical device with numbered components for identification

Technical diagram of a multi-level industrial machine with numbered components and labeled parts

Exterior view of a modern office machine with a close-up inset showing a device labeled 'E' pointing to a port (no text or symbols on the machine itself)

Exterior view of a modern office machine with a close-up of its internal components (no visible text or symbols)

Interior view of a computer monitor case showing internal components and a close-up of the screen (no visible text or symbols)

Laptop screen with directional arrow and control buttons, highlighting power switch and machine operation instructions

Close-up of a printer's front panel with a circular icon highlighting a button (no text or symbols visible)

Close-up of a printer's front panel with a blue circular button icon and directional arrows pointing to it (no text or symbols visible)

Aff.mess. mise hrs tens. (page 15-10)

Interior view of a computer room with open storage unit and multiple camera modules (no visible text or symbols)

3 Mettre la machine hors tension.

Close-up of a device panel with an arrow pointing to a device labeled 'Batter the power outlet, gate the device outlet at the base of the battery'.

Installation personnalise disaster platoon plodpapiques in action of impression Plodes Unitaries 1 2 3 Products & installer Disaster Supplier Disaster Supplier Units 4 Install Cutter

Corbeille scannerdata scannerdata

Industrial machine with red directional arrows indicating rotation or movement (no text or symbols visible)

Close-up of a black mechanical component with red curved arrows indicating rotational motion (no text or symbols)

Close-up of a black robotic arm with red circular arrows indicating rotational motion (no text or symbols)

Installation Page 1 Design - Page Construction Model to Construction Model to Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Construction Agriculture/penetration Diseactive

Exterior view of a printer with a paper sheet and a red circular mark on the cover (no visible text or symbols)

Diagram showing a printer setup with labeled components and a hand operating the printer's screen, including Chinese annotations.

Black printer with white arrows indicating flow or movement, no visible text or symbols on the device itself

Close-up of a printer with a white paper airplane being inserted, showing internal structure and no visible text or symbols.

REMARQUE

Close-up of a printer's front panel showing internal structure and labeled parts (①, ②), no readable text or symbols beyond labels.

New: 100mm x 20mm x 30mm New: 100mm x 20mm x 30mm New: 100mm x 20mm x 30mm New: 100mm x 20mm x 30mm New: 100mm x 20mm x 30mm New: 100mm x 20mm x 30mm New: 100mm x 30mm x 40mm New: 100mm x 30mm x 40mm

VS2 CT2 BK PT2 Model 1: 0000000000000000000 Sect for Number: 0000000000 Time = 36.0000000000000000 Power Number: 1.5Vrms 4 Power Source: 1.5Vrms 4 Wavelength: 1.5Vrms 4

M62 CT2 PT2 Natal: XXXXXXXXXX Date Number: XXXXXXXXXX Time: 00000000000000000 Paper Header: (Drawing 1) Profile name: XXXXXXXXXXXXXXXXXXXXXX PT2

FR T-2 PT T+2 Mean: 30000000000000000 Serial Number: 3000000000000000 Time: 3000000000000000 Date: November 25th December 2nd Inflation rate: 1.8796%

Normal: 100mm x 20mm x 30mm Bar: Normal: 60mm x 50mm Time: 100mm x 20mm x 30mm Revel: Normal: 100mm x 20mm x 30mm Port: Normal: 100mm x 20mm x 30mm

CT1 MS1 FRFR LA1 PT1 LA2 MS2 CT2 PT1LA2 Name: 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Serial Number: 853649478 Time: 19:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38:38 Phone Number: 1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216-1216 Profile Name: #FFC#F#F# M52

Exterior view of a modern office machine with monitor and tower (no visible text or symbols)

*1 Inclut □et .

Person holding a white paper with a red upward arrow and circled target symbol (no text or symbols on the paper itself)

Person holding a white paper with a black arrow pointing downward (no text or symbols visible)

Person holding a closed book, wearing a light blue shirt and dark pants (no visible text or symbols)

Person holding a white paper with a black arrow symbol (no text or numbers visible)

Person holding a white sheet of paper, wearing a light blue shirt and black pants (no visible text or symbols)

Person holding a white rectangular object, viewed from above (no text or symbols visible)

ATTENTION

Technical diagram illustrating the assembly of a printer with envelope and paper, showing four stages of press or printing process.

Interior view of a printer drawer with visible circuitry and a black arrow pointing to a component (no text or symbols)

REMARQUE

Diagram showing a printer or printer device with labeled parts and directional arrows indicating process flow or assembly.

REMARQUE

Technical diagram of a printer or printer with labeled parts and directional arrows indicating process flow or assembly.

Diagram of a printer internal structure with numbered annotations indicating components and parts.

REMARQUE

Top-down view of a printer's front panel with arrows indicating orientation (no text or symbols)

3D rendering of a dark green industrial cabinet or storage unit with multiple compartments and a white arrow pointing to one section (no text or symbols visible)

Diagram showing three steps of a device operation: adding a component, moving a box, and finally adding a fan.

8 Afficher l'écran.

Interior view of a printer drawer with internal compartments and a highlighted paperclip (no text or symbols visible)

REMARQUE

Interior view of a mechanical device with internal components and a close-up of a small electronic device (no visible text or symbols)

Close-up of a mechanical component with two curved arrows indicating rotational motion (no text or symbols)

Technical diagram showing a mechanical assembly with labeled components and an inset view of a component detail.

Diagram of a printer's internal structure with numbered annotations and directional arrows indicating components

Diagram of a printer internal structure with numbered annotations indicating components and parts.

Cross-sectional diagram of a mechanical or electronic component with internal channels and no visible text or symbols

Hagaki (carte)

Cross-sectional diagram of a mechanical or architectural component with internal components and no visible text or symbols

Cross-sectional diagram of a mechanical or architectural component with no visible text or symbols

Architectural floor plan showing room layouts and structural elements (no text or labels)

Architectural floor plan showing room layouts and structural elements (no text or labels)

IMPORTANT

Cross-sectional diagram of a mechanical or electrical component with directional arrows indicating flow or movement (no text or symbols present)

3D rendering of an open electronic device chassis with internal components and a white arrow indicating a specific part (no text or symbols present)

Diagram showing a device with a downward arrow and a warning symbol, likely indicating a process or operation.

ATTENTION

3D rendering of a dark green industrial cabinet or storage unit with multiple compartments and a white arrow pointing to one (no visible text or symbols)

3D rendering of a server rack with two zoomed-in views showing internal components (no text or symbols visible)

5 Afficher l'écran.

Two-panel image showing a device interior with a black arrow pointing downward and a blue play button icon on the right (no text or symbols)

Diagram showing printer printing process with labeled components and directional arrows

1 K 2 K 3 → K 1 2 3

Diagram showing a device with labeled components and numbered parts, likely illustrating a mechanical or electronic assembly.

Interior view of a computer drawer with internal components and a black arrow pointing to a location (no text or symbols visible)

Interior view of a computer drive bay with visible internal components and a magnified inset showing a green tool (no text or symbols)

Interior view of a printer drawer with internal components and a magnified inset showing a green component (no text or symbols visible)

REMARQUE

Interior view of a computer drive bay with an arrow pointing to a component (no visible text or symbols)

ATTENTION

Close-up of industrial machinery components with metallic brackets and mounting holes (no visible text or symbols)

Interior view of a computer drive bay with red arrows indicating internal components (no text or symbols visible)

Interior view of a printer or printer with a highlighted circular diagram and directional arrows (no readable text or symbols)

Interior view of a computer drive bay with an arrow indicating rotation, showing internal components and a document icon (no readable text or symbols)

IMPORTANT

Interior view of a computer drive bay with an inset showing a green tool interacting with the internal components (no visible text or symbols)

ATTENTION

Interior view of a file drawer with internal compartments and a green component, showing no visible text or symbols.

Interior view of a computer drive bay with visible internal components and a close-up inset showing a green tool (no text or symbols)

Interior view of a printer drawer with green keys and arrows indicating movement or process (no text or symbols)

REMARQUE

Simple diagram showing a geometric shape with an L-shaped cutout, placed on a base (no text or symbols)

Simple line drawing of a laptop with a blank screen and a small square icon on the screen (no text or symbols)

Simple diagram showing a room with a dashed line and a small square, no text or symbols present.

IMPORTANT

Overhead view of a printer with a magnifying glass highlighting a green object, no visible text or symbols

IMPORTANT

Interior view of a file drawer with internal components and a black arrow pointing to a location (no text or symbols visible)

Interior view of a computer drive bay with an inset showing a green plastic component (no text or symbols visible)

Close-up of a green plastic electronic component being cut off, with no visible text or symbols

Industrial machine with green panel and magnifying glass overlay (no visible text or symbols)

Close-up of a printer's paper feeding machine with arrows indicating flow direction (no text or symbols visible)

Interior view of a printer with open lid and green filing cabinet, showing internal structure (no text or symbols visible)

Interior view of a printer or printer holder with paper sheets and a white arrow pointing to a component (no visible text or symbols)

REMARQUE

Hand pressing down on a printer's front panel with an arrow symbol pointing upward (no text or symbols present)

Close-up of a printer's internal structure with an arrow pointing to a component, and a magnified inset showing a small electronic component (no visible text or symbols)

Simple diagram showing a right-angle symbol inside a rectangular frame with a vertical wall on the left (no text or labels)

Simple diagram of a device with a rectangular panel and a vertical bar, no text or symbols present.

4

Simple line drawing of a room with a door and window, no text or symbols present

IMPORTANT

1 K K K → K 1 2 3

Interior view of a printer or scanner with a paper feeding into a slot, showing no visible text or symbols.

Technical diagram of a 3D printing machine with numbered components and an inset image showing a printer or scanner.

Close-up of a black and white electronic device with a curved arrow indicating rotation or movement (no text or symbols visible)

Interior view of a mechanical device with metal frame and structural supports (no visible text or symbols)

3D rendering of a mechanical component with green rods and a white block, showing a downward arrow (no text or symbols)

Mechanical assembly with green and black components, showing a close-up of a mechanical component (no text or symbols visible)

3D mechanical component with green rods and a black arrow indicating a feature, no visible text or symbols

Interior view of a mechanical device with metal frame and mounting brackets (no visible text or symbols)

Interior view of a mechanical device with two white arrows pointing to a structural component (no text or symbols visible)

Close-up of a black office desk with a red vertical line and a small electronic device on the side (no visible text or symbols)

Close-up of a black mechanical component with green and white parts, no visible text or symbols

Close-up of a black plastic mechanical component with a white arrow pointing to a section (no text or symbols visible)

Close-up of a black electronic device with a red circular mark highlighting a green component (no text or symbols visible)

Close-up of a green circular button on a black electronic device door (no text or symbols visible)

Close-up of a black industrial machine with mechanical components, no visible text or symbols

Onglet [Publication]

Person handling a large sheet of paper from an open printer (no visible text or symbols)

Industrial machine with a worker operating the door panel, showing a curved arrow pointing downward (no text or symbols visible)

Diagram showing a device component with labeled parts and directional arrows, including numbered annotations.

Instructional diagram showing two steps of a printer or printer device with labeled parts and directional arrows indicating process flow.

Close-up of a black electronic device with two white arrows pointing to internal components (no visible text or symbols)

Close-up of a printer's internal structure with a white arrow indicating a flow or direction, no visible text or symbols.

Mechanical component diagram showing a lever system with blue guide rails (no text or symbols)

Mechanical assembly showing a rolled paper roll being processed with an inset diagram illustrating rotational motion (no text or symbols)

Close-up of a white cylindrical object with red arrows pointing to features, no visible text or symbols.

IMPORTANT

Close-up of a cylindrical mechanical component with two red arrows indicating motion, no visible text or symbols.

IMPORTANT

Close-up of a printer's drawer with hand operating the button, showing internal components and arrows indicating process (no text or symbols)

Exterior view of a printer with paper spread and paper feed (no visible text or symbols)

Close-up of a printer's front panel with a magnified inset showing internal components (no visible text or symbols)

ATTENTION

Close-up of a printer printer with paper feed and green circuit board (no visible text or symbols)

Close-up of a printer's paper feeding machine with a close-up inset showing the printer's internal structure (no text or symbols visible)

Close-up of a printer with a paper airplane icon and an arrow pointing to the cover (no text or symbols visible)

Close-up of a printer's front view showing the paper inside a black frame with an open lid and a red circular mark on the cover (no visible text or symbols)

Close-up of a printer with a paper airplane icon and an arrow pointing to the cover (no visible text or symbols)

Interior view of a printer with an open paper sheet and a red circular icon highlighting a location (no text or symbols visible)

→ Chargement des originaux (page 4-21)

Close-up of a printer with a white paper airplane being opened, showing internal structure and no visible text or symbols.

Close-up of a printer's open lid with a paper airplane being placed, showing no visible text or symbols.

→ Chargement des originaux (page 4-21)

Close-up of a modern printer with a white screen and black arrow pointing to it, no visible text or symbols on the device itself.

Open printer with paper and a red circular mark on the cover (no visible text or symbols)

→ Chargement des originaux (page 4-21)

Close-up of a modern printer with a white cover and black arrow pointing to its screen (no visible text or symbols)

Close-up of a printer's paper feeding machine with an open lid, showing paper and mechanical components (no visible text or symbols)

→ Chargement des originaux (page 4-21)

3 Afficher l'écran.

Close-up of a printer's front panel with a paper airplane icon and an arrow pointing to the cover (no visible text or symbols)

Close-up of a printer's open lid and paper holder with a red circular mark highlighting a location (no visible text or symbols)

→ Chargement des originaux (page 4-21)

3 Afficher l'écran.

Close-up of a printer's front panel with a white screen and a black arrow pointing to it, no visible text or symbols.

Close-up of a printer's open lid and paper holder with a red circular mark highlighting a location (no visible text or symbols)

Close-up of a metallic industrial machine with control panel and close-up view showing a component detail (no visible text or symbols)

Close-up of a printer's front panel with a black arrow pointing to the cover area (no visible text or symbols)

Exterior view of a printer with an open screen and paper feed, showing a red circular warning symbol on the paper (no text or symbols present)

Close-up of a metallic industrial machine with control panel and close-up detail view (no visible text or symbols)

Diagram showing an ID card icon transforming into a document with two blank pages, indicating a composition or relationship.

Agrafe/perfo

Orig./Pap./Finition

Fonctions Fonctions

Agrafage

REMARQUE

Envoi/impression/stockage

Two green leaf icons with white vein patterns, one with a red triangle pointing to the right (no text or symbols)

Child sitting on a green field holding four colorful balloons against a blue sky with clouds (no text or symbols)

Child holding a bundle of colorful balloons floating on a green field under a blue sky with clouds (no text or symbols)

Child holding a bundle of colorful balloons floating on a green field under a blue sky with clouds (no text or symbols)

Élément Description

Row of colored pencils with gradient shading (no text or symbols visible)

Row of colorful pencils in a gradient color scheme, with a red play button on the right (no text or symbols on the pencils)

Row of colorful pencils in blue, yellow, cyan, and magenta hues (no text or symbols)

Impression/Envoi/stockage

Marge/Centrage, Marge, Centrage

Diagram showing two pie charts with green and orange segments, one divided into horizontal lines, and a red arrow pointing to the second chart.

Diagram showing a document transforming into two pie charts, indicating a structural change in the content format.

Original Copie

Diagram showing transformation from an open book to a blank document with placeholder text and a small icon, likely illustrating document processing or layout change.

Original Copie

Diagram showing a document being converted to a document, with a play button indicating the process.

Original Copie

Diagram illustrating document processing steps with numbered cards and star ratings, showing a red arrow indicating transformation.

Original Copie

Diagram showing two document pages with star ratings and numbered sections, connected by a red arrow indicating transformation.

Original Copie

Two-step diagram showing a document with three stars and a red play button, followed by a split image of two star icons on the right.

N° page

graph TD
    A1["A"] --> A2["A"]
    A2 --> A3["A"]
    A3 --> A4["A"]

    subgraph Left
        A1 --> A2
        A2 --> A3
        A3 --> A4
    end

    subgraph Right
        A2 --> A3
        A3 --> A4
    end

Original Copie

Notification/Rapport 15-30

Imprimer rapport/liste 15-30

Envoyer/Stocker 15-45

E-mail 15-45

Notification/Rapport

Nbre copies/impress. 16-46

Illustration of a hand interacting with a digital display device (no text or symbols visible)

Illustration of a hand interacting with a digital display device (no text or symbols visible)

UserA

→ Card Authentication Kit (page 2-21)

Login clavier

Illustration of a hand interacting with a computer monitor (no text or symbols visible)

Illustration of a hand interacting with a computer monitor and printer (no text or symbols visible)

Nbre copies/impress. (page 16-46)

Options de restriction

Nbre copies/impress. (page 16-46)

1 Afficher l'écran.

Nbre copies/impress.

Interior view of a green industrial machine with labeled components (A1, A4-A9) and no visible text or symbols beyond labels.

Person inserting a cable into an open computer case (no visible text or symbols)

Laptop screen with attached cable connector and magnified view showing cable assembly detail

Interior view of a printer or printer with a hand pointing to the open lid (no visible text or symbols)

Interior view of a printer with a hand pointing to the top panel (no visible text or symbols)

Close-up of a printer's open case with a green cloth inside, showing a red upward arrow and a control panel (no visible text or symbols)

Diagram showing two views of a printer's internal structure with numbered annotations indicating process steps.

Two-panel image showing a person in white lab coat installing or adjusting a device inside a black plastic container (no visible text or symbols)

Person in white lab coat applying a yellow substance to a black printer (no visible text or symbols)

Hand holding a green plastic clip next to a whiteboard (no visible text or symbols)

Nettoyage du filtre

Close-up of a hand pressing a slatted metal grille on a green industrial machine (no text or symbols visible)

Close-up of a hand inserting a striped electronic component into a black tray, with a white arrow pointing to the component (no text or symbols visible)

Maintenance des options

Hand holding a wall-mounted device with a green control panel and an arrow pointing to it (no visible text or symbols)

Interior view of a server cabinet with a mounted rack unit and a white arrow pointing to it (no visible text or symbols)

PV1 VCAN VCAN A5H1

Diagram showing two views of a server rack with labeled components, including numbered annotations (① and ②) and a red play button.

Photo of a white plastic bag wrapped in plastic wrap with a red arrow pointing to it, placed on a green surface.

IMPORTANT

Exterior view of a cardboard box with a white paper box and black buttons, placed on a cardboard tray (no visible text or symbols)

Person holding a white cardboard box with red arrows indicating rotation or movement, showing a circular arrow pointing to the box.

IMPORTANT

Close-up of a white electronic device with black modules and a red circle highlighting a small square component on the side (no text or symbols visible)

Stacked server racks with a white rack labeled 'PPT70' and an arrow pointing to it (no readable text beyond label)

Photo of a server rack with labeled boxes and an arrow pointing to a component, likely indicating a system or installation.

REMARQUE

Diagram showing two steps of a refrigerator interior with labeled arrows and components

Technical line drawing of a mechanical device with internal components and directional arrows indicating motion (no text or symbols)

Diagram showing a refrigerator interior with labeled parts and an inset view of the device's internal structure.

Diagram of a folded paper or plastic sheet with a black arrow indicating direction (no text or symbols present)

IMPORTANT

Illustration of a wrapped bag with a small object inside, tied with a ribbon (no text or symbols)

Diagram showing a box being dropped into a 3D printer (no text or symbols present)

IMPORTANT

Diagram showing a hand holding a device with a prohibition sign, alongside an exploded view of a mechanical component.

Technical line drawing of a mechanical device with an inset close-up showing internal components (no text or symbols)

Diagram showing a printer device with labeled parts and a schematic of the boat's water level control system.

IMPORTANT

Technical line drawing of a mechanical device with an inset showing a component being inserted (no text or symbols present)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or movement.

REMARQUE

Interior view of a mechanical device with visible components and a white arrow indicating direction (no text or symbols)

Hand inserting a plastic bag into an industrial machine (no visible text or symbols)

3 Sortir la cartouche vide.

Two-panel photo showing a hand placing a transparent plastic component into a small electronic device, with an arrow indicating rotation (no text or symbols)

Two-panel photo showing a cardboard box with internal components being handled, one being open and the other holding a transparent plastic container (no text or symbols visible)

Two-step illustration showing hands assembling a mechanical component, one with a white arrow indicating direction (no text or symbols)

Hand inserting a small object into a device, with no visible text or symbols on the device itself

7 Refermer le capot.

Close-up of a black computer monitor with a white arrow pointing to the side panel (no text or symbols visible)

Diagram showing two labeled views (① and ②) of a robotic device interior with accessories and a close-up of a person wearing a mask.

Diagram showing two-step assembly process of a mechanical component, labeled with numbered parts and directional arrows indicating motion.

Two-step photo showing a hand holding a device with arrows indicating process steps (no text or symbols present)

Two-panel image showing a hand operating a mechanical device, with red arrows and white fan symbols indicating motion or adjustment (no readable text or symbols)

6 Refermer les capots.

Diagram showing a device with labeled arrows (① and ②) indicating motion or rotation, likely from a software interface.

Interior view of a mechanical or industrial machine with visible components and control panels (no readable text or symbols)

Interior view of a spacecraft simulator cockpit with open cockpit and interior display (no visible text or symbols)

REMARQUE

Interior view of a modern office or lab space with a person inside, showing equipment and a white container (no visible text or symbols)

5 Refermer le capot.

Black computer monitor with a white arrow pointing to the front panel (no text or symbols visible)

Interior view of a mechanical device with internal components and a white arrow indicating direction (no visible text or symbols)

Interior view of a vehicle's internal components, showing engine, battery, and control panel (no visible text or symbols)

REMARQUE

Illustration of a person receiving a medical or surgical procedure with a blue device on the shoulder (no text or symbols visible)

Interior view of a mechanical assembly with white plastic components and a green component, no visible text or symbols

5 Refermer le capot.

Black rectangular object with a white arrow pointing right, next to a small electronic device (no text or symbols visible)

18 Menu Réglage/Maintenance

Colorful checkerboard pattern with diagonal stripes (no text or symbols)

Pure geometric pattern with diagonal hatching and a horizontal line (no text or symbols)

IMPORTANT

Cross-sectional diagram of a mechanical or electronic device with layered internal structure (no text or symbols)

ATTENTION

Color palette selection grid with black, blue, pink, yellow, and white squares arranged in rows and columns

Diagram showing a printer's internal structure with color-coded modules and directional arrows indicating orientation or flow.

Cross-sectional diagram of a mechanical device showing internal components and housing (no text or symbols)

ATTENTION

MD CV TS MV CV TV

Cross-sectional diagram of a mechanical device showing internal components and housing (no text or symbols)

ATTENTION

Abstract color block design with horizontal bands and small black squares at top and bottom (no text or symbols)

Diagram showing a printer's internal structure with directional arrows and a color-coded spectrum, likely illustrating a printing or scanning process.

REMARQUE

Abstract pattern of horizontal blue stripes with black squares at the bottom, no text or symbols present

Diagram showing a printer's internal structure with directional arrows and a blue waveform display, likely illustrating a printing or scanning process.

REMARQUE

Cross-sectional diagram of a mechanical or electronic component with layered structure (no text or symbols)

ATTENTION

Date: 2022/05/17 00:49

Diagram showing a printer with directional arrows and a color-coded document, indicating orientation or flow direction.

Abstract pattern of horizontal blue stripes with black square markers, no text or symbols present

Diagram showing printer operation with directional arrows and a warning symbol, likely from an older software interface.

REMARQUE

KYOCERA IK-7107K 980B119

IK-7107K 980B119

→ Printing System 50 user guide

Illustration of a hand pressing down on a piece of paper with a blue arrow indicating direction (no text or symbols)

Sens du papier

Illustration of a hand pressing down on a piece of paper with a blue arrow indicating direction (no text or symbols)

Sens du papier

A1-A3 A10-A13 A4-A9

A1~3 A10~13 A1 A4~9

Interior view of a mechanical assembly or machine with control panels and a highlighted section (no readable text or symbols)

Close-up of a printer's paper being inserted into a slot, with an arrow indicating the paper's direction (no text or symbols visible)

Interior view of a computer monitor with an open lid and a paper box inserted into the tray (no visible text or symbols)

Interior view of a printer with paper and a small inset image showing a device (no visible text or symbols)

Interior view of a mechanical device with visible components and a white arrow indicating direction (no text or symbols)

Interior view of a robotic device with a person inside, showing mechanical components and a blue circular component (no visible text or symbols)

Close-up of a hand inserting a small electronic device into a machine (no visible text or symbols)

Close-up of hands assembling a mechanical component on a green surface, with an arrow indicating rotation (no text or symbols visible)

Close-up of hands assembling a black plastic electronic component with a curved arrow indicating rotation (no text or symbols visible)

IMPORTANT

Close-up of a finger pressing down on a small electronic component with a black arrow indicating the process (no text or symbols visible)

IMPORTANT

Close-up of hands holding a mechanical component with a green sensor, no visible text or symbols

Hand inserting a small blue object into a black industrial machine component, with no visible text or symbols on the device itself.

Black rectangular object with a white arrow pointing right, next to a small device component (no text or symbols visible)

Diagram showing a device interior with labeled parts and directional arrows indicating movement or flow, including numbered annotations ① and ②.

Close-up of a mechanical assembly with a white arrow pointing upward and a white triangular shape drawn on the part (no text or symbols visible)

Interior view of a modern office or retail space with a person inside, showing digital displays and a white interior (no visible text or symbols)

C 1 B 2

3D mechanical component diagram showing internal parts and a directional arrow (no text or symbols)

5 Refermer le cache.

3D mechanical component diagram showing internal parts and a curved arrow indicating rotation (no text or symbols)

Technical diagram showing mechanical assembly with labeled components and directional arrows indicating motion or flow

Diagram showing two labeled arrows (① and ②) indicating directional movement or process flow on a device component.

Diagram showing two labeled components (① and ②) of a printer or printer device, with arrows pointing to specific parts.

Instructional diagram showing printer press operation with numbered steps and zoomed-in view

Close-up of a printer's internal structure showing multiple drive bays and a paper feeding mechanism (no text or symbols visible)

Close-up of a mechanical component with a blue internal component and an arrow pointing to it, labeled 'D9' (no readable text or symbols beyond label)

Close-up of a hand inserting a paper into a printer, with an arrow indicating the process.

Close-up of a hand pressing down on a black industrial machine component with an arrow indicating a process direction (no text or symbols visible)

Close-up of a printer's internal structure showing black plastic folders and a blue scroll wheel (no text or symbols visible)

D9

Close-up of a printer's internal structure with a paper feed and a black arrow indicating a document being inserted (no visible text or symbols)

Close-up of a printer's internal structure showing internal components and a paperclip, with an arrow pointing to the component (no text or symbols visible)

Close-up of a printer's paper feeding into a paper holder, with a black arrow indicating the paper's direction (no text or symbols visible)

Close-up of a printer's internal structure showing a black plastic holder and white paper feeding into a white paper holder (no text or symbols visible)

Close-up of a printer's front panel showing black and white components with a black arrow pointing to the bottom part (no text or symbols visible)

Autre problème

Fonctions

Data Security Kit

Card Authentication Kit

DHCP (Dynamic Host Configuration Protocol)

KPDL (Kyocera Page Description Language)

NetBEUI (NetBIOS Extended User Interface)

https://www.kyoceradocumentsolutions.com/company/directory.html