Question 1

How to change the output tray for printed documents on a KYOCERA TASKalfa 3253ci printer?

Accepted Answer

To change the output tray for printed documents on your KYOCERA TASKalfa 3253ci printer, follow these simple steps:

1. Access the printer control panel

Turn on the printer and use the touchscreen located at the front to navigate through the menus.

2. Open print settings

In the main menu, select the Settings or Menu option to access the device settings.

3. Find output options

Look for the section titled Output, Output Options, or Tray Management. This section allows you to choose the output tray for printed documents.

4. Select the desired output tray

In this section, you can choose between the different available trays (for example, upper tray, lower tray, or another specific tray).

5. Confirm and save the choice

After selecting the desired tray, confirm your choice by pressing OK or Validate to save the settings.

6. Test the printing

To verify that the change is effective, run a test print and check that the documents come out of the selected tray.

These settings may also be accessible via the print driver on your computer, in the print properties, under the tab or section dedicated to tray or output tray management.

Question 2

How to install the IB-37 module on the KYOCERA TASKalfa 352ci printer?

Accepted Answer

To install the IB-37 module on your KYOCERA TASKalfa 352ci printer, follow the steps below:

IB-37 Module Installation Steps

Turn off and unplug the printer: Ensure that the device is completely powered off and disconnected from the electrical outlet for your safety.
Locate the expansion compartment: The IB-37 module typically connects at the back of the printer. Remove the cover of the expansion compartment to access the connector.
Insert the IB-37 module: Carefully align the module with the internal connector and gently insert it until it is securely in place.
Close the compartment: Replace the cover to protect the module and secure the installation.
Reconnect and turn on the printer: Plug the printer back into the power supply and turn it on.
Configure the module: Access the printer's control panel to configure network settings or other specific settings related to the IB-37 module as needed.
Check the installation: Print a configuration page or system report to confirm that the IB-37 module is recognized and functioning correctly.

By following these steps, you will be able to safely and effectively install and configure the IB-37 module on your KYOCERA TASKalfa 352ci.

Question 3

How to change the time on the KYOCERA TASKalfa 3253ci printer?

Accepted Answer

To change the time on your KYOCERA TASKalfa 3253ci multifunction printer, access the system configuration menu. Press the [System/Menu Counter] button on the touchscreen control panel, then select [Date/Time/Eco Energy].

Once in this menu, you will find three main settings to configure the time:

Time Zone: Set the time offset from GMT by selecting the time zone closest to your area. If your area observes daylight saving time, be sure to also configure the corresponding settings.
Date/Time: Enter the exact date and time. The accepted ranges are: Year (2000 to 2035), Month (1 to 12), Day (1 to 31), Hour (00 to 23), Minute (00 to 59), Second (00 to 59).
Date Format: Choose the display format that suits you from the three available options: MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD.

After configuring these settings, confirm your changes to save them. The time you set will be displayed in the header of emails sent via the printer's transmission function.

Helpful Tip: You can also set the time automatically and periodically by synchronizing your printer with a network time server. This ensures that the time remains accurate without manual intervention.

User manual KYOCERA Printer : user manuals and guides in PDF

Models KYOCERA Printer most viewed

Other categories KYOCERA

Recent questions about Printer KYOCERA