MXBBM2151 - Blender Mx Onda - Free user manual and instructions

Features	Details
Device type	Blender
Power	Varies by model
Bowl capacity	Varies by model
Bowl material	Plastic or glass
Number of speeds	Varies by model
Pulse function	Yes
Accessories included	Varies by model
Cleaning	Bowl and accessories dishwasher safe
Dimensions	Varies by model
Weight	Varies by model
Safety	Lid locking system
Warranty	Varies by model

Frequently Asked Questions - MXBBM2151 Mx Onda

How do I clean the Mx Onda MXBBM2151 blender after use?

To clean the blender, disassemble the accessories and wash them with warm soapy water. You can also use a mixture of water and vinegar to remove stubborn residues.

What should I do if the blender does not start?

Check that the blender is properly plugged in and that the lid is securely in place. Also ensure that the outlet is functioning correctly.

The blender makes unusual noises, what should I do?

If the blender makes strange noises, this may indicate a problem with the blades or the motor. Turn off the device, unplug it, and check the blades for any debris or damage.

Can I use the blender for hot foods?

Yes, the Mx Onda MXBBM2151 blender can be used for hot foods. However, avoid exceeding the recommended maximum capacity to prevent splashing.

How can I tell if the blades need to be replaced?

If you notice that foods are not blending well or the blender takes longer to reach the desired consistency, it may be time to replace the blades.

The blender smells burnt, what should I do?

Turn off the device immediately and unplug it. The burnt smell may indicate overheating. Let the blender cool down before reusing it and consult the manual for specific advice.

How can I get replacement parts for the Mx Onda MXBBM2151?

You can order replacement parts from Mx Onda customer service or on their official website. Make sure to know the model number to facilitate the search.

The blender is leaking, what should I do?

Check that all seals are properly in place and that the container is correctly attached. If the leak persists, contact after-sales service for assistance.

USER MANUAL MXBBM2151 Mx Onda

Ajustando as lâminas:

WARNING This unit operates with a voltage of 230 V, to avoid a possible electrical shock not try to open it. This equipment does not have part some that could be repaired by your, in the event of a wrong operation not manipulate it, and attend to an Official Technical Service MX ONDA.

This product complies with European Directives RoHS (2002/95/CE), on the restriction of use of certain dangerous substances in electrical and electronic appliances, transposed to the Spanish legislation by means of Real Decree 208/2005. INTRODUCTION The hand mixer MX ONDA MX-BBM2151 is equipped with a powerful engine which will allow whisk and chop and mix with ease. Also includes a selector with two speeds and pulse mode, will make it easier to adapt the mixer on each type of food to be prepared. The blender has the following characteristics:

• Selector with two speeds

• Speed selector button illuminated

• Glass jar with lid 1.5 liter flexible plastic drip.

• Read these instructions carefully and keep them for later use.

• Check that the voltage of your power outlet is 230 V ~ 50 Hz

• Do not use an extension cord. If you decide to do it on his own responsibility, use only extension that is in good condition and suitable for the performance of the device.

• Before use clean the main body, glass jug and accessories.

• The extension cord should be placed so that not drape over the countertop or table so that children can be pulled or tripped over him.

• When not using the blender do not let the mains cord hang over the edge of the area where it is located, or come into contact with hot surfaces. Waste electrical products must not be disposed of with household waste. This equipment should be taken to your local recycling centre for safe treatment.3

• Do not place the blender on or near gas burners or electric hot plates.

• To reduce the risk of fire or electric shock, do not remove the cover from the base unit.

• To protect against risk of electric shock and personal injury, do not immerse cord, plug or main body in water or any other liquid.

• After removing the packaging, check that the device is not damaged. If in doubt do not use the appliance and contact the technical support staff.

• The packaging materials (plastic bags, polystyrene foam, etc.) Should not be left within reach of children as they are a potential source of danger.

• The manufacturer disclaims any liability for damages resulting from improper use, improper or careless of the device. SAFETY INFORMATION When using electrical appliances, should always be basic safety measures to reduce the risk of electric shock and / or bodily injury. These measures include:

• This unit can not be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have received proper instructions on using the equipment and shall be supervised by an adult or responsible person.

• This appliance is only for domestic use, not professional. MX ONDA do not accept responsibility and the guarantee will not apply in case of misuse or failure to follow instructions.

• This product is designed for indoor use, do not expose this appliance to rain or moisture and do not use with wet hands.

• For working with the blender, placed the blender on a dry, stable and level.

• Do not touch moving parts when it is connected to the main.

• While the blender is connected and running, do not neglect their vigilance and keep out of reach of children.

• To disconnect the mains blender pull the plug. Never pull on the cable do.

• The use of accessories not recommended by the appliance manufacturer may cause fire, electric shock or injury. The blender has moving parts and therefore very sharp during handling or cleaning the most extreme precautions to avoid personal injury.

• Never use the blender in continuous operation for more than 2 minutes.

• Unplug the blender, whenever do not use, insert foods or ingredients into the jar, a cut of electrical source, before coming to the own cleaning of maintenance

• Do not use the blender with food how hard bones, frozen meat, etc.4

• Do not get in the glass jug too hot and prevent damage to it because of a "thermal shock". We recommend you preheat the glass jug, place the glass jug under the faucet with hot or warm water.

• Never use the mixer in continuous operation for more than 2 minutes.

• If for some reason when using the blender you need to open the lid of it, remove the jar from the base or disconnect it from the mains.

• In case of failure, abnormalities, the blender itself is dropped, the plug or other parts are considered impaired, or the cable is damaged, do not use the appliance and do not attempt to repair it yourself. Contact our Customer Service nearest MX ONDA. BEFORE USING THE MIXER FOR THE FIRST TIME

• Carefully read all sections of this manual.

• Remove the jug and remove the cover and the measuring cup.

• Remove the blades of the mixer (as described in the INSERT AND REMOVE THE STEEL BLADES section).

• Wash with soap and warm water jug, the lid, the measuring cup and the blades (extreme caution when washing this piece).

• Then carefully dry all parts and reassemble in the blender.

• It is possible that the first few times you use the blender, a slight odor occurs. This is normal and is because the device is new, it will disappear shortly after use.

• The gear selector only illuminate when the jar is properly engaged and the engine is running. SAFETY SYSTEM AND PLACEMENT OF GLASS JUG The blender includes a safety system that prevents operation of the same while the glass jug is not attached properly on the base. Inserting the glass jug The base or set motor 7 has two grooves and two small slits in the top and the glass jug 3 has two tabs and two small tabs at the base of it. Place the jar on top of the base or motor assembly matching big eyelashes pitcher with big cracks in the base or motor assembly. Then make a small turn in the direction of clockwise, until you feel small "click" indicating that the jar is properly docked. Removing the glass jug To remove the glass jug make a little twist counterclockwise, then pull up the glass jug.5

This appliance is designed for domestic use, so to avoid overheating do not use the blender continuously for more than 2 minutes. Never exceed the maximum capacity of 1.5 liters jug.

INSERT AND REMOVE THE STEEL BLADES

How to remove the steel blades:

1. Turn clockwise support of steel blades 6,

use the pins "A" to loosen it without difficulty.

2. After removing the steel blades support,

very carefully remove the steel blades 5 and rubber ring 4.

How to insert the steel blades:

1. Insert the rubber ring 4 in the bottom of the

glass jug and place it so that it sits perfectly on the glass base. Otherwise placing the blades and the support thereof, the rubber can be pinched and damaged. It can also happen that being misplaced the spilled liquid elements.

2. With caution place the steel blades 5 above

the rubber ring 4, check properly on the rubber ring.

3. Place the blades support 6 and turn it counterclockwise, use the pins "A" to

tighten properly. Note: To avoid damaging the threads of the glass jug 3 or the blades support 6 to place the support not use excessive force, find the thread gently turning the holder counterclockwise, once found continue turning the screw support until you feel more pressure at that time should be tightened more strongly support the blades. OPERATION

1. Make sure mixer is unplugged and the jar is properly attached to the base.

2. Place the ingredients in the jar and if required, using the measuring cup to

control the amount thereof (sugar, flour, etc.).

3. Before operating the blender place the lid and insert the measuring cup over

it, turning it clockwise until the clock is retained. When you want to remove the measuring cup rotate in the opposite direction to clockwise.

4. Plug mixer to a network outlet.

5. By the sped selector 8 choose the desired 1 slow speed or 2 fast speed.

Turning the sped selector to the P position, the mixer will run at the fastest speed, but only for the time you have turned to this position the button, release the button as soon as the engine stops.

6. After the drawing, unplug mixer from outlet.

TIPS AND SUGGESTIONS

Creams, smoothies or vegetables (cucumbers, tomatoes, etc.) For a smooth and creamy texture blending avoid hard foods such as potatoes, cucumbers, etc., with more soft (tomatoes, peppers, etc.). Prepare them separately.7 Mayonnaise and sauces For the preparation of mayonnaise, use the ingredients at room temperature. Example: If you use cold eggs, mayonnaise can be watery or very runny. During the development process, remove the measuring cup to pour through the gap in the lid oil or other ingredients. Smoothies with milk and fruit, ice cream, coffee, etc. As these more milk shakes made up an additional ingredient (fruit, ice cream, etc.), you must keep in mind that citrus fruits cut milk. If you use ice as an additional ingredient, you must first chop. Liquid or semi-liquid mass, dough or batter crepes. Once prepared the dough for pancakes, let stand about 10 minutes. After that time and prior to use, re- beat it for 1 or 2 seconds. Pureed fruit or vegetables, porridge or pates. During the preparation of baby food purees or to the desired consistency you may need to add water or milk, for which remove the measuring cup and pour the liquid through the hole in the lid. Coffee grind, crush or grind nuts cookies. In order to obtain a uniform texture add no more than 100 grams (approximately) every time crush or grind . Before grinding nuts, be sure to remove the hard shell of the same. CLEANING

• Before cleaning unplug the blender to power supply.

• Do not immerse main body in water or another liquid.

• The glass jug can be washed in the dishwasher. The rest of the accessories can be washed with warm water and detergent.

• The plastic surface of the main body of the mixer can be cleaned with a damp cloth. Do not use alcohol or abrasives. STORAGE To storage your blender, make sure it is clean and dry. We recommend that if you are not using the blender for an extended period of time, slightly loosen the blades support 6 so that the rubber ring is not constantly pressured to avoid deformation or deterioration. Remember that when you want to use must correctly tighten the blades support. Store your blender along with accessories in a dry, dust-free, within their own packaging or cover with plastic wrap, paper, etc.8 TECHNICAL SPECIFICATIONS Operating voltage 220 - 240 V ~ 50 Hz Maximum power 600 W Glass jug capacity 1.5 litres Speed numbers 2 + PULSE Working time 120 seconds Cord length 110 cm Dimensions 190 x 180 x 385 mm (w, d, h) Weight 2.8 Kg Specifications subject to change without notice. This product complies with the European Directives 2004/108/EC (EMC – Electromagnetic Compatibility) and the 2006/95/EC (LVD – Low Voltage Directive) relative to Low Tension Security. “MX, MX ONDA” and its logos are trademarks of MX ONDA, S.A. MX ONDA, S.A. Isla de Java, 37 28034 – MADRID (SPAIN) Telephone of information and Technical Service: 902 551 501