MX-TF60 - Telephone Mx Onda - Free user manual and instructions
Find the device manual for free MX-TF60 Mx Onda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded desk telephone |
| Brand | Mx Onda |
| Model | MX-TF60 |
| Network Compatibility | Analog PSTN |
| Dialing Modes | DTMF / Pulse switchable |
| Caller ID | Supports caller ID for incoming calls |
| Phonebook | Up to 50 entries |
| Redial | Last number redial |
| Mute | Available |
| Hold | Available |
| Flash | Available |
| Pause | Available for PBX systems |
| Ringer Volume | Adjustable |
| Handset Volume | Adjustable |
| Wall-Mountable | Yes |
| Power Source | Powered from the telephone line |
| Operating Temperature | 0°C to 40°C |
| Dimensions (approx) | 220 × 190 × 80 mm |
| Weight (approx) | 700 g |
| Accessories Included | RJ11 telephone cable, user manual |
| Cleaning and Maintenance | Wipe with dry cloth; avoid liquids |
| Safety Certification | CE / RoHS compliant |
Frequently Asked Questions - MX-TF60 Mx Onda
How do I connect the Mx Onda MX-TF60 telephone?
Insert one end of the RJ11 cable into the telephone's line port and the other end into the wall telephone jack. Lift the handset to check for a dial tone. The phone is now ready to use.
Can I use the MX-TF60 with a VoIP adapter?
Yes, as long as the adapter provides an analog telephone port (FXS). Connect the phone to that port using a standard RJ11 cable and set the dialing mode to DTMF for compatibility.
How do I adjust the ringer volume?
Use the ringer volume control usually located on the base or side of the phone. Turn the dial or press the switch to select low, medium, or high volume according to your preference.
What does the flash button do on the MX-TF60?
The Flash button provides a timed hookswitch flash, used for call waiting or to access PBX features such as transferring calls. Pressing it briefly will switch between active calls or trigger special services.
Can I mount the MX-TF60 on a wall?
Yes, the MX-TF60 is wall-mountable. Slot the phone onto standard wall mounting screws or use the provided mounting holes, then route the telephone cable neatly. Ensure the handset is secured in its cradle.
How do I clean the telephone?
Unplug the phone before cleaning. Wipe the surfaces with a soft, dry cloth. Avoid using liquid cleaners, sprays, or abrasive materials which could damage the plastic and electrical components.
No dial tone, what should I do?
First, verify that the RJ11 cable is securely connected at both ends and that the wall jack is active. If the issue persists, test the phone in another jack. Check if the handset cord is properly attached and not damaged.
Can I use the MX-TF60 during a power outage?
Yes, because the phone is powered from the telephone line, it does not require external electricity. However, features like backlit displays or extra functions may not work without power, but basic calls will function.
Does the MX-TF60 support caller ID?
Yes, it supports caller ID (CLIP) on compatible networks. Incoming number and name may be displayed on the LCD screen if the service is provisioned by your telephone operator.
How do I set the dialing mode (pulse/DTMF)?
Locate the dialing mode switch on the base of the phone, often labeled P/T. Set it to DTMF (Tone) for modern exchanges, or Pulse for older systems. Consult your service provider if unsure.
User questions about MX-TF60 Mx Onda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Telephone in PDF format for free! Find your manual MX-TF60 - Mx Onda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX-TF60 by Mx Onda.
USER MANUAL MX-TF60 Mx Onda
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mx Onda
Model : MX-TF60
Category : Telephone