MX-TF27 - Telephone Mx Onda - Free user manual and instructions

Product Type	Cordless Phone (DECT)
Brand	Mx Onda
Model	MX-TF27
Handset Dimensions	180 x 50 x 25 mm
Handset Weight	120 g
Base Station Dimensions	120 x 80 x 70 mm
Base Station Weight	200 g
Power Supply (Base)	AC 230V, 50Hz
Battery (Handset)	2 x AAA Ni-MH 1.2V 550mAh
Talk Time	Up to 10 hours
Standby Time	Up to 100 hours
Range	Up to 50m indoors, 300m outdoors
Display	LCD with backlight
Keypad	Illuminated
Functions	Caller ID, call waiting, handsfree speakerphone, phonebook (50 contacts), redial, mute, volume control, intercom
Maintenance	Clean with soft dry cloth; avoid liquids
Safety	Use only recommended batteries; do not expose to moisture; disconnect during thunderstorms
Spare Parts	Batteries (AAA Ni-MH), power adapter, replacement handset
Repairability	Refer to authorized service center; do not disassemble
General Information	Compatible with analog telephone lines; CE marked

Frequently Asked Questions - MX-TF27 Mx Onda

How do I charge the handset for the first time?

Place the handset on the base station and allow it to charge for at least 12 hours before first use.

Why is there no dial tone?

Check that the base station is plugged into a working phone line and power outlet. Ensure the handset is registered to the base.

How do I store contacts in the phonebook?

Press the Phonebook button, select 'Add New', enter the name and number, then confirm.

Can I use the phone during a power outage?

No, the base station requires mains power. However, the handset may briefly work on battery if already charged, but call functionality will be lost.

How do I adjust the ringer volume?

Press the volume control keys on the side of the handset when idle. You can also set it in the Settings menu.

What type of batteries does the handset use?

It uses two AAA Ni-MH rechargeable batteries (1.2V, 550mAh). Do not use non-rechargeable batteries.

How do I register an additional handset?

Press the Registration button on the base station, then follow the handset's menu to 'Register Handset' and enter the base PIN (default 0000).

Why is the handset not ringing?

Check that the ringer is turned on in the handset settings. Also ensure the handset is within range and not on silent mode.

Can I block unwanted calls?

This model may not have a call block feature. Check the manual for Caller ID management. You can manually reject calls.

How do I clean the phone?

Use a soft, dry cloth to wipe the surfaces. Do not use any liquids or cleaning agents, as they may damage the electronics.

USER MANUAL MX-TF27 Mx Onda

O