SR02 - Radio LENCO - Free user manual and instructions

USER MANUAL SR02 LENCO

controls or adjustments or performance o

procedures other than those specified herein may resulte in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.

2. Clean only with a slightly damp cloth.

3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5

cm (2”) free space around the whole device.

4. Install in accordance with the supplied user manual.

5. Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and

the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keeptheentiredeviceouto

children’s reach! When playing with the power cable, they can seriously injure themselves.

6. Unplug this device during lightning storms or when unused for a long period.

7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and

other heat‐generating products.

8. Avoid using the device near strong magnetic fields.

this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static‐free environment.

10. Warning! Never insert an object into the product through the vents or openings. High

voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming

12. Do not use this device when condensation may occur.

13. Although this device is manufactured with the utmost care and checked several times

before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build‐up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

14. This device must be well ventilated at all time!

15. This device must operate on a power source as specified on the specification label. If you

power supply used in your home, consult your dealer or local power company.

16. The socket outlet must be installed near the equipment and must be easily accessible.

17. Do not overload ac outlets or extension cords. Overloading can cause fire or electric

18. Devices with class 1 construction should be connected to a main socket outlet with a

protective earthed connection.

19. Devices with class 2 construction do not require a earthed connection.

20. Keep away from rodents. Rodents enjoy biting on power cords.

21. Always hold the plug when pulling it out of the main supply socket. Do not pull the power

cord. This can cause a short circuit.

22. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.

23. To protect the device during a thunderstorm, unplug the ac power adaptor.

24. When the device is not in use for long periods, unplug the ac power adaptor for safety

25. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To

remove severe stains, you may use a damp cloth with dilute detergent.

26. The supplier is not responsible for damage or lost data caused by malfunction, misuse,

the device or battery replacement.

27. Do not interrupt the connection when the device is formatting or transferring files.

Otherwise, data may be corrupted or lost.28. The usb memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing o

29. The apparatus shall not be exposed to dripping or splashing and make sure that no objects

filled with liquids, such as vases, are placed on or near the apparatus.

30. To completely disconnect the power input, the mains plug o

the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.

31. The mains plug of the apparatus should not be obstructed or should be easily accessed

during intended use.

32. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

33. Minimum distance of 10cm around the apparatus is needed for sufficient ventilations.

34. The ventilation should not be impeded by covering the ventilation openings with items such

as newspapers, table‐cloths, curtains etc.

35. No naked flame sources such as lighted candles should be placed on the apparatus.

36. Attention should be drawn to the environmental aspects of battery disposal.

37. The apparatus can only be used in moderate extremely cold or climates warm

environments should be avoided.

38. The rating label has been marked on the bottom panel of the apparatus.

39. This device is not intended for use by people (including children) with physical, sensory or

mental disabilities, or a lack o

experience and knowledge, unless they’re under supervision or have received instructions about the correct use o

the device by the person who is responsible for their safety.

40. This product is intended for household use only and not for commercial or industrial use.

41. Make sure the unit is adjusted to a stable position. Damage caused by using this product in

an unstable position or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

42. Never remove the casing of this apparatus.

43. Never place this apparatus on other electrical equipment.

44. Do not use or store this product in a place where it is subject to direct sunlight, heat,

excessive dust or vibration.

45. Do not clean this product with water or other liquids.

46. Do not block or cover the slots and holes in the product.

47. Do not push foreign objects into the slots or holes in the product.

48. Do not allow children access to plastic bags.

49. Please check that the voltage on the type plate o

your appliance corresponds with your house electricity supply (type plate is located on the back o

50. Protect the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

51. Only use attachments/accessories specified by the manufacturer.

52. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

53. Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or

Warning: prolonged exposure to loud sounds from personal music players may lead to temporary

or permanent hearing loss. INSTALLATION

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

• Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.Product Overview

15. Battery Compartment

Instructions Basic operations Switch on your radio for the first time Mains Connection Make sure that all of the components connected correctly. Check that the voltage level required by your equipment matches the local mains supply, namely 230 V/AC‐50Hz. Plug the unit into the wall outlet Clock back up battery - Remove the battery compartment cover - Insert 2xAAA size 1.5V batteries, ensuring correct polarity as indicated inside the battery compartment. NOTE: Check your batteries regularly, old or discharged batteries may leak and damage the unit. When replacing batteries always ensure you do not mix old and new batteries and replace with the same type batteries. Listening to the Radio - Set the Function switch to ON mode to power on the unit. - Choose the radio band (FM, FM ST.) Using the AUX/FM/FM ST. band switch. - Search for the station of your choice using the Tuning knob. - To switch off the radio, set the Function Switch to select the POWER off or AUTO mode to off the unit. NOTE: For optimum FM radio reception, extend the FM antenna wire. Aux in function - Set the Function switch to ON mode to power on the unit. - Set the AUX/FM/FM ST. Switch to select the AUX function. - You can put the other audio products through the Aux in jack to play the music.Clock and Alarm Operation Setting the Clock Press the HOUR button to select your desired hour, if you press the HOUR Button steady, the hour will increase quickly. Press the MINUTE Button to select your desired minutes, if you Press the MINUTE Button steady, the minute will increase quickly. Alarm the Buzzer Set the Function switch to Buzzer mode, press Clock/Alarm button, “AL” show on display, Press HOUR and MINUTE button respectively to adjust desired alarm hour and minute. Press the AL/ON/OFF Button to open the alarm. Note: The alarm of buzzer could continue for 3 minutes! Alarm can be OFF by pressing AL/ON/OFF button at any time. Alarm the Radio Set the radio band (FM/FM ST.) which you desired to alarm. Set the Function switch to AUTO mode, press Clock/Alarm button, “AL” show on display. Press HOUR and MINUTE button respectively to adjust desired alarm hour and minute. Press the AL/ON/OFF Button to open the alarm. Adjust the desired volume If the current time is the same as the time which you setting, then the setting radio will be alarm up. Note: The alarm of radio could continue for 1 hour! Alarm can be OFF by pressing AL/ON/OFF button at any time. FAQs Problem Solution No Power Check that the system is connected to a working mains outlet. No sound Check that the volume control is not at minimum setting. Poor reception Adjust the location of the antenna for best signal reception. Function disturbed If none of the above solution work, try unplugging your Radio. Specifications Frequency ranges FM 87.5‐108MHz Output connector 3.5mm earphone socket Aerial antenna Power supply AC 230V 50Hz Output power 2 x 3W RMS Battery Backup 3V 2xAAA Guarantee Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer. Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a non‐official service center in any way,the warranty expires. This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided. Disclaimer Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual. Disposal of the Old Device This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive). Service For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.Nederlands SR-02 LET OP! Het gebruik van bediening o