Q: What is the cartridge model of the LENCO L3818?

The LENCO L3818 is equipped with a Audio-Technica AT-3600L cartridge , a MM (moving magnet) type cartridge. Technical specifications of this cartridge: Stylus pressure: 3 +/- 0.5g Cartridge weight: 5 +/- 0.5g Tracking force adjustment range: 3 to 4 grams If you need to replace this cartridge, unlock the fixing screw, gently remove it, and install the new one by correctly aligning the four colored contacts: white (L+), blue (L-), red (R+), and green (R-).

Q: What cartridge is supplied with the LENCO L3828?

The LENCO L3828 turntable is equipped with an AT-95E cartridge manufactured by Audio-Technica . This cartridge is supplied as standard with the turntable and is mounted on the tonearm. It is a MM (Moving Magnet) type cartridge, a reliable and widely used playback technology. Its main technical specifications are: Output voltage: 3.5 mV at 5 cm/s Channel separation: 20 dB at 1 kHz Channel balance: 2 dB maximum Recommended tracking force: 2 g (range of 1.5 to 2.5 g) Stylus: elliptical diamond, dimensions 0.4 x 0.7 mil Frequency response: 20 Hz to 20 kHz The AT-95E cartridge is suitable for medium to high mass tonearms, which perfectly matches the S-shaped arm of the L3828. It offers good clarity and satisfactory definition for vinyl playback, ideal for analog music enthusiasts. Before use, ensure that the tracking force is correctly set to 2 g using the tonearm's counterweight. Proper adjustment of this parameter is essential to optimize sound quality and preserve the wear of your vinyl records.

Q: Is the LENCO L3828 a manual or automatic turntable?

The LENCO L3828 is a manual 2-speed turntable , equipped with some automatic features to protect your vinyl collection. Start and stop operation: Manual start - You press the large push-button to engage the high-torque motor and start the platter rotation. The platter does not spin automatically when powered on. Manual stop - You press the button a second time to stop the platter. However, the device has an automatic stop that halts the rotation once playback is finished, or if the arm is not in contact with the record for 5 minutes, to protect your record. Arm lift - The arm lift lever is manual; you must operate it yourself with precision. Manual speeds - You must manually select between 33⅓ and 45 RPM using the dedicated buttons. Additional automatic features: Automatic standby - After 20 minutes of inactivity, the turntable enters standby mode (0.5 W) to save energy. It reactivates as soon as you set a speed. In summary, the LENCO L3828 is a manual turntable where you maintain full control over all actions, with just an automatic protection to prevent premature wear of your stylus and reduce energy consumption.

Q: How to unlock the display "time is not set" and make the buttons work on the Lenco SCD-69 DAB+ CD radio during the first use?

The message "time is not set" on your Lenco SCD-69 DAB+ CD radio appears during the first use because the device cannot function properly without the time being set. This is an intentional lock that prevents the buttons from responding until you set the time. Here’s how to unlock your device: Access the setup menu: Press and hold the Info/menu button for a few seconds until you access Menu mode (the LCD screen will change). Use the Station (-) and Station (+) buttons to navigate through the menu options. Press the Enter button to confirm your selections. Set the time manually: In the main menu, navigate to System and press Enter . Select Time , then Set Time/Date . Using the Station (-) and Station (+) buttons, set the hour, minutes, and date as needed. Press Enter to validate each field. Alternative: Automatic time update: If you want the time to be set automatically, in the System menu, select Time then Auto Update . Choose Update from any source (default option) for the device to automatically retrieve the time from DAB or FM radio. Once you have tuned into a station, the time will be updated automatically and the buttons will become active again. Once the time is set correctly, the message will disappear and all buttons on your Lenco SCD-69 DAB+ CD radio will function normally. If after these steps the screen remains locked and the buttons still do not respond, you can reset the device by performing a factory reset via the System menu, option Factory Reset . However, this action will erase all your custom settings, your DAB station list, and your stored stations.

Question 1

What is the cartridge model of the LENCO L3818?

Accepted Answer

The LENCO L3818 is equipped with a Audio-Technica AT-3600L cartridge, a MM (moving magnet) type cartridge.

Technical specifications of this cartridge:

Stylus pressure: 3 +/- 0.5g
Cartridge weight: 5 +/- 0.5g
Tracking force adjustment range: 3 to 4 grams

If you need to replace this cartridge, unlock the fixing screw, gently remove it, and install the new one by correctly aligning the four colored contacts: white (L+), blue (L-), red (R+), and green (R-).

Question 2

Does the arm of the LENCO L3818 lift automatically at the end of playback?

Accepted Answer

No, the arm of the LENCO L3818 does not lift automatically. This turntable is equipped with a manual tonearm (also called a tonearm lifter) that you must operate yourself at the end of each playback. It is a completely manual system, typical of entry to mid-range turntables, while automatic lifting at the end of the record is reserved for high-end models.

How the tonearm lifter works: The LENCO L3818 has a tonearm lifter lever located on the body of the turntable. You can manually operate it to lift or lower the tonearm as needed. The arm is a statically balanced S-shape model, 220 mm long, equipped with an Audio-Technica AT-3600L cartridge.

Importance of manually lifting the arm: You must lift the arm immediately at the end of playback to protect your record and stylus. Leaving the arm in contact with the record after the end of the track may prematurely wear the diamond of the stylus (which has a pressure of 3 ± 0.5 grams on your model) and damage the grooves of the vinyl. The record continuing to slightly turn will create scratches that will degrade sound quality.

Practical tip: As soon as you hear that the last track is ending or that one side of the record is coming to an end, immediately lift the arm using the lifter. This will quickly become a natural reflex in your daily use of the LENCO L3818. By properly maintaining your equipment this way, you will significantly extend the lifespan of your records and the playback cartridge.

Question 3

What cartridge is supplied with the LENCO L3828?

Accepted Answer

The LENCO L3828 turntable is equipped with an AT-95E cartridge manufactured by Audio-Technica. This cartridge is supplied as standard with the turntable and is mounted on the tonearm.

It is a MM (Moving Magnet) type cartridge, a reliable and widely used playback technology. Its main technical specifications are:

Output voltage: 3.5 mV at 5 cm/s
Channel separation: 20 dB at 1 kHz
Channel balance: 2 dB maximum
Recommended tracking force: 2 g (range of 1.5 to 2.5 g)
Stylus: elliptical diamond, dimensions 0.4 x 0.7 mil
Frequency response: 20 Hz to 20 kHz

The AT-95E cartridge is suitable for medium to high mass tonearms, which perfectly matches the S-shaped arm of the L3828. It offers good clarity and satisfactory definition for vinyl playback, ideal for analog music enthusiasts.

Before use, ensure that the tracking force is correctly set to 2 g using the tonearm's counterweight. Proper adjustment of this parameter is essential to optimize sound quality and preserve the wear of your vinyl records.

Question 4

Is the LENCO L3828 a manual or automatic turntable?

Accepted Answer

The LENCO L3828 is a manual 2-speed turntable, equipped with some automatic features to protect your vinyl collection.

Start and stop operation:

Manual start - You press the large push-button to engage the high-torque motor and start the platter rotation. The platter does not spin automatically when powered on.
Manual stop - You press the button a second time to stop the platter. However, the device has an automatic stop that halts the rotation once playback is finished, or if the arm is not in contact with the record for 5 minutes, to protect your record.
Arm lift - The arm lift lever is manual; you must operate it yourself with precision.
Manual speeds - You must manually select between 33⅓ and 45 RPM using the dedicated buttons.

Additional automatic features:

Automatic standby - After 20 minutes of inactivity, the turntable enters standby mode (0.5 W) to save energy. It reactivates as soon as you set a speed.

In summary, the LENCO L3828 is a manual turntable where you maintain full control over all actions, with just an automatic protection to prevent premature wear of your stylus and reduce energy consumption.

Question 5

Where can I download the software for the Lenco DPA-155 digital photo frame?

Accepted Answer

To download the software for the Lenco DPA-155 digital photo frame, follow these steps:

Visit the official Lenco website.
Go to the Support or Downloads section.
Search for the model DPA-155 in the product list.
Download the software or drivers compatible with your operating system.

If the software is not available directly on the site, it is possible that the photo frame works without specific software or that the files are accessible via a direct USB connection. In this case, you can transfer your photos simply by connecting the frame to your computer.

Question 6

How to unlock the display "time is not set" and make the buttons work on the Lenco SCD-69 DAB+ CD radio during the first use?

Accepted Answer

The message "time is not set" on your Lenco SCD-69 DAB+ CD radio appears during the first use because the device cannot function properly without the time being set. This is an intentional lock that prevents the buttons from responding until you set the time. Here’s how to unlock your device:

Access the setup menu:

Press and hold the Info/menu button for a few seconds until you access Menu mode (the LCD screen will change).
Use the Station (-) and Station (+) buttons to navigate through the menu options.
Press the Enter button to confirm your selections.

Set the time manually:

In the main menu, navigate to System and press Enter.
Select Time, then Set Time/Date.
Using the Station (-) and Station (+) buttons, set the hour, minutes, and date as needed.
Press Enter to validate each field.

Alternative: Automatic time update: If you want the time to be set automatically, in the System menu, select Time then Auto Update. Choose Update from any source (default option) for the device to automatically retrieve the time from DAB or FM radio. Once you have tuned into a station, the time will be updated automatically and the buttons will become active again.

Once the time is set correctly, the message will disappear and all buttons on your Lenco SCD-69 DAB+ CD radio will function normally. If after these steps the screen remains locked and the buttons still do not respond, you can reset the device by performing a factory reset via the System menu, option Factory Reset. However, this action will erase all your custom settings, your DAB station list, and your stored stations.

Question 7

How to change the diamond of the LENCO L-69 turntable?

Accepted Answer

To change the diamond of your LENCO L-69 turntable, follow these precise steps to ensure safe handling and proper functioning of your device:

Steps to replace the diamond:

Preparation: Unplug the turntable from the electrical outlet and place it on a stable and clean surface.
Accessing the cartridge: Gently lift the tonearm. Depending on the model, there may be a lever or a lock to unlock.
Removing the cartridge: The cartridge containing the diamond is attached to the end of the arm. Unscrew the screws holding it if necessary, noting their position for reassembly.
Extracting the diamond: The diamond may be clipped or screwed onto the cartridge. If clipped, gently press on the sides to release it. If screwed, use a small suitable screwdriver to unscrew it without forcing.
Installing the new diamond: Position the new diamond by aligning it correctly with the cartridge. Snap it in or screw it in firmly but without excess.
Reassembly: Replace the cartridge on the tonearm and screw it back securely, respecting the initial positions.
Final test: Plug the turntable back in and play a vinyl to check the sound quality and the proper functioning of the new diamond.

Additional tips:

Always handle the diamond with care to avoid damaging it.
Use appropriate tools and avoid forcing when unscrewing or clipping.
If you encounter difficulty or doubt, do not hesitate to seek help from a professional specialized in turntables.

User manual LENCO : user manuals and guides in PDF

Models LENCO most viewed

Browse manuals LENCO by appliance type

Recent questions about devices LENCO