LSA-071 - Turntable LENCO - Free user manual and instructions
Find the device manual for free LSA-071 LENCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Lenco |
| Model | LSA-071 |
| Product type | Turntable |
| Drive | Belt drive |
| Speeds | 33 ⅓ and 45 RPM |
| Platter | Aluminum |
| Included cartridge | Moving Magnet (MM) |
| Built-in phono preamp | Yes, switchable |
| Outputs | Stereo RCA |
| Tonearm | Straight with counterweight and anti-skating |
| Signal-to-noise ratio | > 65 dB |
| Wow and flutter | < 0.25 % |
| Power supply | 100-240 V, 50/60 Hz |
| Power consumption | 5 W |
| Dimensions (W x D x H) | 420 x 350 x 100 mm |
| Weight | 3.5 kg |
| Chassis material | MDF |
| Dust cover | Included |
| Included accessories | 45 RPM adapter, RCA cable, power cable |
Frequently Asked Questions - LSA-071 LENCO
How to install the LSA-071 turntable?
Place the turntable on a flat and stable surface. Remove the cover, install the rubber platter, then place the record. Connect the RCA cable to the amplifier and the power cable. If your amplifier does not have a phono input, enable the built-in preamp via the rear switch.
How to adjust the rotation speed?
Use the speed selector button on the front panel: 33 RPM for LPs, 45 RPM for singles. For fine-tuning, turn the adjustment potentiometer under the platter with a screwdriver while using a strobe.
How to replace the cartridge?
Disconnect the turntable. Remove the dust cover from the tonearm. Loosen the screws securing the cartridge on the headshell. Disconnect the wires from the old cartridge and connect the new one. Retighten and adjust the tracking force and anti-skating according to the manufacturer's recommendations.
How to clean the stylus?
Use a special stylus brush or cleaning fluid. Gently brush from back to front. Avoid any lateral contact to prevent damaging the diamond.
The turntable does not spin, what to do?
Check that the power is plugged in and the switch is ON. Make sure the belt is correctly placed on the motor and the platter. If the motor does not spin, contact customer service.
How to connect the turntable to an amplifier without a phono input?
Use the built-in phono preamp: switch the rear switch to 'LINE' instead of 'PHONO'. Then connect to a line input (AUX) of the amplifier. If you are using a phono input, leave the switch on 'PHONO'.
Can you record vinyls to MP3 with this turntable?
The LSA-071 model does not have a USB output or built-in recorder. To digitize your vinyls, you must connect the RCA output to a computer via an external sound card with an appropriate preamp.
What regular maintenance to perform?
Regularly clean the stylus with a brush. Dust the cover and chassis with a soft cloth. Check the belt every 6 months and replace it if loose. Lubricate the motor according to the manual.
Where to find spare parts for the Lenco LSA-071?
Check the official Lenco website or contact their customer service. Authorized dealers and Hi-Fi parts websites offer compatible belts, cartridges, and headshells.
The sound is distorted or has noise, what to check?
Check that the stylus is not dirty or worn. Verify the tracking force and anti-skating. Make sure the RCA cable is properly connected and not damaged. If the problem persists, test with another record and another amplifier input.
User questions about LSA-071 LENCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Turntable in PDF format for free! Find your manual LSA-071 - LENCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LSA-071 by LENCO.
USER MANUAL LSA-071 LENCO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LENCO
Model : LSA-071
Category : Turntable