Silképil Beautyset 7 7875 - Epilator BRAUN - Free user manual and instructions

Product type	Wet and dry epilator
Brand	Braun
Model	Silképil Beautyset 7 7875
Battery life	50 minutes cordless
Charging time	2 hours
Battery type	Integrated rechargeable (replaceable at authorized service center)
Speeds	2 speeds (I: extra gentle, II: extra effective)
SensoSmart indicator	Light indicator: green for normal use, red for excessive pressure
Included accessories	High-frequency massage rollers, skin contact attachment, sensitive area attachment, facial attachment, shaving head with trimmer, charging base
Usage	Dry or under water (shower, bath)
Cleaning	Cleaning brush or under running water
Safety	Lock button to prevent accidental start-up
Warranty	2 years
Country of manufacture	Not specified in manual
Dimensions (approximate)	Approximately 15 x 5 x 4 cm (head included)
Weight (approximate)	Approximately 200 g (without cord)
Power supply	Special cord with integrated power supply, suitable for all AC voltages
Maintenance	Lubricate shaving parts every 3 months
Spare parts	Available at Braun retailers and authorized service centers
Charging temperature	Between 15°C and 35°C
Recommended hair length	2 to 5 mm for epilation

Frequently Asked Questions - Silképil Beautyset 7 7875 BRAUN

How to charge the Braun Silképil Beautyset 7 7875 epilator?

Plug the special cord (7) into a mains socket and charge the device for 2 hours. The charging indicator (5) flashes green while charging and becomes solid green when fully charged. Use the device cordless after charging.

What does the SensoSmart indicator mean?

The SensoSmart indicator (3) lights up when the device is operating. It remains green normally and turns red if you exert excessive pressure on the skin. It allows you to visualize the finest hairs.

Can I use the epilator in the shower?

Yes, the device can be used under water, in the bath or in the shower. For safety reasons, use it only cordless. Make sure the skin is well wet for better gliding.

How to clean the epilation head?

You can clean the epilation head with the provided brush, possibly dipped in alcohol for optimal hygiene. You can also rinse it under running water: remove the head, press the ejection button, shake it off and let it dry separately.

What speeds are available and when to use them?

The device has two speeds: speed I for extra gentle epilation (ideal for first times or sensitive areas) and speed II for extra effective epilation.

How to adapt the epilator for sensitive areas (underarms, bikini line)?

Use the sensitive area attachment (8) by attaching it to the epilation head. For first-time use, select speed I. Wash the area before epilation and dry it gently. Avoid alcohol-based deodorants after epilation.

Can I use the epilator on my face?

Yes, with the facial attachment (9) placed on the epilation head. For first times, choose speed I. Clean the skin with alcohol before, stretch the skin with one hand and move the epilator slowly, switch downwards.

What is the battery life and how to know when to recharge?

The battery life is about 50 minutes after 2 hours charging. The charging indicator becomes solid yellow when 15 minutes remain, and flashing yellow when 5 minutes remain. Recharge when the indicator turns yellow or if the motor stops.

How to maintain the shaving head?

Do not clean the shaver foil with the brush to avoid damaging it. Lubricate the shaving parts every three months. Replace the foil and cutter block if performance decreases.

What to do in case of skin irritation after epilation?

Irritations (redness, itching) are normal, especially the first times. Apply a moisturizing cream. If symptoms persist beyond 36 hours, consult a doctor. Thorough cleaning of the head before each use reduces the risk of infection.

USER MANUAL Silképil Beautyset 7 7875 BRAUN

(Sharecall charged at local rates)

	7/890	7/880	7/870	7/860
8		√	√	√
9	√	√	√	√
10		√
				√
	√			√

A

B

German

Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy using your Braun Silk-épil 7.

Please read the use instructions carefully before using the appliance and keep them for future reference.

Braun Silk-epil 7 has been designed to make the removal of unwanted hair as efficient, gentle and easy as possible.

Important

• For hygienic reasons, do not share this appliance with other persons.
• This appliance is provided with a special cord set with an integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. Otherwise there is risk of electric shock. For electric specifications, please see printing on the special cord set. The special cord set automatically adapts to any worldwide AC voltage.
• Only use the special cord set provided with the appliance.
• If the appliance is marked 492 , you can use it with any Braun power supply coded 492-XXXX. This appliance is suitable for use in a bathtub or shower. For safety reasons, it can only be operated cordless.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Children should not play with the appliance.

Cleaning and user maintenance should not be made by children unless they are older than 8 years and supervised.

• When switched on, the appliance must never come in contact with the hair on your head, eyelashes, ribbons, etc. to prevent any danger of injury as well as to prevent blockage or damage to the appliance.

Description

1a High frequency massage cap 1b Skin contact cap 2 Epilation head 3 SensoSmartTM light 4 Switch with lock keys (4a) 5 Charging light 6 Release button 7 Special cord set (design can differ) 8 Sensitive area cap 9 Facial cap 10 Shaver head with trimmer cap 11 Charging stand * not with all models (see page 3)

Charging

• Using the special cord set (7) connect the appliance to an electrical outlet and charge it for 2 hours.

Charging light (5)

Flashing green: charging

Green: fully charged

Yellow: 15 min charge left

Flashing yellow: 5 min charge left

• Once fully charged, use the appliance cordless. Operation time is 50 minutes when it is used within 24 hours after charging. Recharge it when the yellow light comes on or when the motor has stopped completely. For best performance, always use a fully charged appliance.
• The best temperature range for charging, using and storing the appliance is between 15°C and 35°C. In case the temperature is far beyond this range, the charging time might be longer whereas the cordless operation time might be reduced.
• At the end of its lifetime, the rechargeable battery can be replaced at an authorized Braun Service Centre.

How to operate the appliance

Switch on the appliance by pressing a lock key (4a) and turning the switch (4) clockwise to position «I» or «II».

The SensoSmartTM light (3) shines as long as the appliance is switched on to provide good visibility of fine hairs.

When you apply too much pressure while epilating, the SensoSmart light signals red.

To remove the epilation head, press the release button (6). To change caps (1a), (1b) or (8), press their lateral ribs and pull off.

A Epilation

Epilation tips

If you have not used an epilator before, or if you have not epilated for a longer period of time, it may take a short time for your skin to adapt to epilation. The discomfort experienced in the beginning will decrease

considerably with repeated use as the skin adapts to the process.

When epilating for the first time, it is advisable to epilate in the evening, so that any possible reddening can disappear overnight. To relax the skin we recommend applying a moisture cream after epilation. Epilation is easier and more comfortable when the hair is at the optimum length of 2-5 mm. If hairs are longer, we recommend that you shave first and epilate the shorter, re-growing hairs after 1 or 2 weeks. Alternatively, you can trim the hairs to 5 mm length.

Fine, regrowing hairs might not grow up to the skin surface. The regular use of massage sponges (e.g. after showering) or exfoliation peelings helps to prevent ingrown hair as the gentle scrubbing action removes the upper skin layer and fine hair can get through to the skin surface.

Dry usage: Your skin must be dry and free from grease or cream.

Wet usage: The appliance can be used on wet skin, even under running water. Make sure that the skin is very moist in order to achieve optimum gliding conditions for the appliance. After each wet usage, clean the appliance under running water.

How to epilate

Before use, always make sure that the epilation head (2) is clean and provided with a cap (1a or 1b).

1 Select speed «I» for a gentle epilation and speed «II» for an efficient epilation. 2 Always stretch your skin when epilating. Make sure that the epilation area is in contact with your skin.

Guide the appliance in a slow, continuous movement without pressure against the hair growth, in the direction of the switch. As hair can grow in different directions, it may also be helpful to guide the appliance in different directions to achieve optimum results. The massage cap (1a) ensures

best skin comfort during epilation. If you are used to the sensation of epilation, you may replace the massage cap with the skin contact cap (1b) which provides a closer contact to your skin and an improved adaptation to all body areas. Whenever the SensoSmart™ light shines red, this is to remind you not to press too hard.

3 Leg epilation

Epilate your legs from the lower leg in an upward direction. When epilating behind the knee, keep the leg stretched out straight.

4 Underarm and bikini line epilation

The sensitive area cap (8) has been specifically designed for use in these areas. Place it onto the epilation head.

Please be aware that especially at the beginning, these areas are particularly pain-sensitive. Therefore, we recommend that you select speed setting «I» for the first few times. With repeated usage the pain sensation will diminish.

Before epilating, thoroughly clean the respective area to remove residues (like deodorant). When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions. As skin may be more sensitive directly after epilation, avoid using irritating substances such as deodorants with alcohol.

5 Facial epilation

For removing any unwanted hair from the face, use the facial cap (9) as an optional attachment to be placed on the epilation head (2).

For the first few usages, we recommend that you select speed setting «I» in order to get used to the epilation sensation in those sensitive areas.

Prior to epilation, we recommend cleaning the skin with alcohol to promote good hygiene. When epilating the face, stretch the skin with one hand and slowly guide the epilator with your other hand the direction of the switch.

6 Cleaning the epilation head

Regular cleaning ensures better performance.

a Brush cleaning:

Remove the cap and brush it out.

Thoroughly clean the epilator head from the rear side with the brush dipped into alcohol. While doing so, turn the tweezer element manually. This cleaning method ensures best hygienic conditions for the epilation head.

b Cleaning under running water:

After each wet usage, clean the appliance under running water. Remove the cap. Hold the appliance with the epilation head under hot running water. Then press the release button (6) to remove the epilation head. Thoroughly shake both, the epilation head and the appliance to make sure that remaining water can drip out. Leave both parts to dry. Before reattaching, make sure that they are completely dry.

General information on epilation

All methods of hair removal from the root can lead to in-grown hair and irritation (e.g. itching, discomfort and reddening of the skin) depending on the condition of the skin and hair. This is a normal reaction and should quickly disappear, but may be stronger when you are removing hair from the root for the first few times or if you have sensitive skin.

If, after 36 hours, the skin still shows irritation, we recommend that you contact your physician.

In general, the skin reaction and the sensation of pain tend to diminish considerably with the repeated use of Silk-epil. In some cases, inflammation of the skin could occur when bacteria penetrate the skin (e.g. when sliding the appliance over the skin). Thorough cleaning of the epilation head before each use will minimize the risk of infection.

If you have any doubts about using this appliance, please consult your physician. In the following cases, this appliance

should only be used after prior consultation with a physician: eczema, wounds, inflamed skin reactions such as folliculitis (purulent hair follicles) and, varicose veins, around moles, reduced immunity of the skin, e.g. diabetes mellitus, during pregnancy, Raynaud's disease, haemophilia, Candida or immune deficiency.

B How to use the shaver head

The shaver head (10) is designed for a fast and close shave of legs, underarms and bikini line, contour trimming and cutting hair to 5 mm length. With the shaver head attached, use the appliance only on dry skin and with speed setting «II».

a Shaving: select «♂» b Contour trimming: select «a». c Trimming hair to 5 mm length: select «θ» and put on the trimmer cap (I). d Cleaning: Do not clean the shaver foil (II) with the brush as this may damage the foil. e The shaving parts need to be lubricated regularly every 3 months. f Replace the foil frame (II) and cutter block (III) when you notice a reduced shaving performance. Replacement parts can be obtained from your retailer or Braun Customer Service Centres or via www.service.braun.com. Do not shave with a damaged foil.

Disposal

This product contains batteries and recyclable electronic waste. To protect the environment, do not dispose of it in the household waste, but take it to appropriate local collection points.

Subject to change without notice.

Guarantee

We grant a 2-year guarantee on the product commencing on the date of purchase. Within the guarantee period, we

will eliminate any defects in the appliance resulting from faults in materials or workmanship, free of charge, either by repairing or replacing the complete appliance at our discretion.

This guarantee extends to every country where this appliance is supplied by Braun or its appointed distributor.

This guarantee does not cover: damage due to improper use, normal wear or use, as well as defects that have a negligible effect on the value or operation of the appliance.

The guarantee becomes void if repairs are undertaken by unauthorized persons and if original Braun parts are not used.

To obtain service within the guarantee period, hand in or send the complete appliance with your sales receipt to an authorized Braun Customer Service Centre (address information available online at www.service.braun.com).

For UK only:

This guarantee in no way affects your rights under statutory law.

French

ELMIN, Durdevac 48350

R. Boškovića 20, Tel. [phone],

[e-mail]

BKS d.o.o., Slavonski brod 35 000

J.J. Strossmayera 29, Tel. [phone]

[e-mail]

FRUK d.o.o., Virovitica 33 000

J.J. Strossmayera 23, Tel. [phone]

[e-mail]

MARKOVIĆ OBRT ZA EL. USLUGE,

Varaždin 42 000

Krešimira Filica 9, Tel. [phone],

[e-mail]

RADAN ELEKTRONIK CENTAR d.o.o.,

Dubrovnik 20 000

Ob. Pape I. Pavla II. 17, Tel. [phone]

[e-mail]

Tehno-Jelčić d.o.o., Šibenik 22 000

VIII Dalmatinske Udarne Brigade 71,

Tel. [phone]

MERC&DUJMOVIĆ, Split 21 000

Alojzija Stepinca 6, Tel. [phone],

[e-mail]

Slovenski

Our products are designed to meet the highest standards of quality, functionality, and design. We hope you will enjoy using the Braun Silk-epil 7.

Before using the appliance, carefully read the instructions for use and keep them for future reference.

When using the special attachment with the cable (7), connect the device to an electrical outlet and charge it for about 2 hours.

Charging indicator light (5)

Lights up with green light: charging

How to use the epilator head

Quick charge: 15 minutes

Full charge: 5 minutes

Charging

Connect the device using a special cable (7) to a power outlet and charge it for 2 hours.

Charging indicator (5)

Green light:

Charging in progress

Green light on:

Charged

Charge lasts 15 minutes

Red light:

Charge lasts 5 minutes

Use the device fully charged without the cable. When using it for 24 hours after charging, it lasts 50 minutes. Charge the device if the charging indicator lights up or when it stops working. For maximum efficiency, fully charge the device before use. The optimal temperature for charging, using, and storing the device ranges from 15 °C to 35 °C. Temperatures outside this range may cause longer charging times and sudden loss of device operation without warning. If the battery becomes unusable, it can be replaced at authorized Braun service centers.

Using the device

Press the switch (4a) and turn the switch (4) clockwise. You can select speed "I" or "II".

The SensoSmartTM light (3) is on while the device is on. It helps to better distribute the hair. If you press the device too hard during epilation, the SensoSmartTM light turns red.

Apply the epilator (2) to the skin (6).

Apply the epilator, press the button and remove it.

A Epilator

Getting used to the epilator

If you have not used an epilator before or have not epilated for a long time, your skin may need to adapt. The discomfort felt at the beginning will significantly decrease with repeated use of the epilator over time.

To perform the procedure, it is necessary to prepare the skin so that the hairs can be removed. To soften the skin, we recommend applying a moisturizing cream before epilation. Epilation is easier and better tolerated when the hair length is 2-5 mm. If your hair is longer, we recommend first trimming and then removing the shorter hairs with the epilator for 1 or 2 weeks. Alternatively, you can shorten the hair with a trimmer to 5 mm.

Ingrown hairs may not grow to the surface of the skin. Regular use of massage gloves (e.g., a loofah) or a peeling procedure helps to prevent ingrown hairs, as it removes the upper layer of the skin, and the hairs can then grow to the surface.

Use on dry skin: the skin must be dry, without cream.

Use on wet skin: make sure the skin is sufficiently wet for optimal movement of the device.

How to use the device

Before use, make sure that the epilator head (2) is clean and closed with the cap (1a or 1b).

1 Select speed «I» for gentle epilation or speed «II» for effective epilation.

2 During epilation, always stretch the skin. Make sure that the epilator head is in full contact with the skin.

Move the device slowly, with a steady motion, without pressing, against the direction of hair growth, in the direction of removal. Since hairs may grow in different directions, for optimal results move the device in different directions. The massage cap (1a) reduces the feeling of discomfort during epilation. If you are used to the sensations during epilation, you can replace the massage cap with the maximum contact cap (1b), which ensures better contact with the skin and helps to treat all areas better. The first signal of the SmartLight system warns you not to press the device too hard.

3 Epilate

Position the epilator head at a right angle to the skin. Press the epilator head against the skin to turn it on.

4 Epilation under the arms and in the bikini line

The epilator head (8) was specially designed for use in these areas. Place the head on the epilator body. The skin in these areas is particularly sensitive to pain during the first few epilation sessions. Therefore, we recommend selecting speed "I" for the first few epilation sessions.

With repeated use, the pain will decrease. Before epilation, thoroughly clean the skin and remove any residue of cosmetic products (e.g., deodorant). Then dry the skin with a towel. When epilating under the arms, keep your arm in a raised position so that the skin is taut, and move the device in different directions. Since the skin in these areas

may be more sensitive after epilation, avoid using perfumed deodorants or alcohol-based deodorants.

5 Epilation on the face

To remove unwanted hair on the face or in other sensitive areas, use the epilation head for the face (9) as an accessory on the epilator head.

For the first few uses, we recommend selecting speed "I" so that the skin gets used to epilation in these sensitive areas.

Before epilation, we recommend cleaning the skin with a tonic containing alcohol. When epilating the face, hold the skin taut with one hand and guide the device with the other.

6 Cleaning the epilator head

Regular cleaning ensures optimal performance.

a Cleaning with the brush:

Remove the head and clean it with the brush. Thoroughly clean the epilator head from the back side with the brush, moistened with alcohol. Turn the brush while doing this. This cleaning method ensures the best hygienic cleanliness of the epilator head.

b Cleaning under running water:

After each use in the shower or bath, rinse the device under running water. Remove the cap and rinse the epilator head under warm running water. Then press the release button (6) to remove the epilator head. Shake the device and the epilator head to remove excess water and allow the parts to dry before reassembling.

Information about the device

All methods of hair removal with the root part can cause

skin irritation (for example, itching, discomfort and redness of the skin) depending on the condition of the skin and hair. This is a normal reaction that quickly passes, but it can be strong during the first few times of hair removal with the root part or when practicing on sensitive skin. If after 36 hours the irritation does not pass, consult a doctor. As a rule, the reaction of the skin and hair significantly decreases with repeated use of Silk-epil.

In some cases, skin inflammation may occur when bacteria get on the skin (for example, when sliding the device over the skin). Thorough cleaning of the epilator head before each use minimizes the risk of infection. If you have doubts about using this device, consult a doctor. The device can be used only after consulting a doctor for such conditions: eczema, wounds, infectious skin lesions, folliculitis (inflammation of the hair follicle), varicose veins, moles, reduced skin immunity, for example, in diabetes, during pregnancy, with Raynaud's disease, hemophilia, candidiasis or immunodeficiency.

All requirements, together with the requirements for the disposal of waste, do not apply to the responsibility that is not established by law.

The warranty does not apply to:

• Defects caused by force majeure circumstances;
• Use for professional purposes or for profit;
• Violation of operating instructions;
• Incorrect installation of the shaving head (the shaving foil);
• Disinfectant changes; - mechanical damage; - damage caused by batteries - working with unsuitable batteries, any damage caused by leaking or leaking batteries;
• Damage caused by animals, rodents and insects (including cases of finding rodents and insects inside the device) - damage caused by the mains or power cord.

Attention! The warranty is valid only upon application to the warranty service center. After the repair, the warranty will be considered renewed from the date of the repair with the stamp of the service center and the signature of the consumer on receipt of the repaired device. The warranty period is extended for the time the device is in the service center for repair. In case of difficulties with the warranty and post-warranty service, contact the information service of the representative of the manufacturer in Ukraine.

Toll-free hotline [phone]. Calls from Ukraine from landline numbers are free. Calls from mobile phones are charged according to the tariffs of the corresponding operator.

You can also get detailed information on the manufacturer's service portal on the Internet at www.service.braun.com

Country of origin: Germany Year of manufacture

To determine the year of manufacture, refer to the 4-digit production code starting with "PC" located near the type plate. The first digit refers to the last digit of the year of manufacture. The next three digits refer to the day in the year of manufacture. Example: "PC7123": The product was manufactured on day 123 of 2017.

. www.service.braun.com

J (SensoSmartTM (3

g j 11

J 1

11j！Lgagbawll jie

SensoSmart

Jz.2 TM).

(6)

yai jbi 1i bce 1 J

1

A

J

1j! jlll

aJl llln 1j g

gll 1y

Lao 11

15

.

aLwJSLoY1*j 8

9

10

11

(3)

(7) aIJIJI IJIJI aegogag

i 1

.

(5) jai

j: j000000000000000000000000000000

Jokyl aigaaolbly

:

J11 Jlss1 15

:

J 5

jll oioi JooLooie

Loie 50 g.

24 1

loie jll

1

J.

j11 Logs w

AaJL

y1

35,15 4

aJ11 2j

1 1