SG27093 - Self-balancing scooter smartGyro - Free user manual and instructions

USER MANUAL SG27093 smartGyro

• Whenever you use the product, be sure to wear appropriate clothing with appropriate protectors to avoid personal injury. Wear protective clothing, such as knee and elbow pads or gloves. Its use is mandatory. Be sure to wear comfortable clothes. Above all it is important that your shoes are closed and flat. Do not wear very loose and long clothes that can get into the wheels or catch on the product.

• Before mounting on the product, carefully read this user manual, which explains all the basic principles and tips for using your hover- board and your Go-Kart PRO. It is essential to check the fastening and fastening of the screws weekly and that the mails are correctly hooked to your hoverboard to avoid an accident.

• Check that you have correctly assembled the structure and that you have tightened the straps securely and securely to your hover- board before mounting. We recommend a weekly review at least.

• Do not make any sudden turns to avoid dangerous situations. Familiarize yourself with the product before using it at a higher speed.

• Do not use this device on public roads, roads, or in crowded places. Use the product in clear areas and away from street furniture or other obstacles. Do not use on roads dedicated to motor vehicle traffic.

• The use of the Go-Kart PRO considerably reduces the battery time of your hoverboard (approximately between 20-30%) due to the speed it reaches and its greater friction. It is totally normal, does not mean that your hoverboard battery is failing. YOU MUST COMPLY WITH ALL LOCAL AND / OR STATE LAWS OF YOUR REGION / COUNTRY REGARDING THE USE

Characteristics A new way to get around with your Hoverboard. It adapts to your lifestyle and follows its rhythm: a new way of traveling with your hoverboard easy, safe and comfortable. Made of high quality materials, has a comfortable and ergonomic backrest, footrest and two rudders with which you can direct your hoverboard. In addition, its coupling through adjustable straps, makes it compatible with most hoverboards on the market and is convenient and quick to install. Sit comfortably in the seat and use the side bars as steering rudders to go left, right, continue straight or brake. It is a very simple product to use but you must be careful not to reach high speeds. Assembly instructions Check that the packaging contains all the necessary components for the correct assembly of the product; check also that the product has not suffered any damage during its transport. Step 1: As shown in the picture, the saddle is screwed to the structure, make sure you screw it firmly and safely. Always check, before mounting, that the screws are firmly screwed.smartgyro.es Go-Kart PRO- Manual

Step 2: You must perform the entire installation as shown in the following images, firmly tightening screws and structure. Step 3: The seat must be screwed on the flat rectangular part of the final structure once it has been assembled and screwed correctly. smartgyro.es

The seat must be screwed on the flat rectangular part of the final structure once it has been Note: The unit includes special felt guards to be placed on the metal part of the Go-Kart so that it does not scratch or mark the Hover- board.smartgyro.es Go-Kart PRO- Manual

Important The use of the Go-Kart PRO considerably reduces the battery time of your hoverboard (approximately between 20-30%) by the speed it reaches and its greater friction. It is totally normal, does not mean that your hoverboard battery is failing. If you have used the skate with Go-kart PRO or any other similar support, the battery life is shorter because it subjects the skate to a much higher speed and continuously. Keep in mind that using this type of supports, the skate overheats so it is necessary to wait until the temperature drops to put it to charge again. Recycle your device Electrical or electronic products, batteries, accumulators and other accessories must necessarily be collected separately. When you have finished the useful life of your electrical or electronic device remove the batteries and deposit it, separately, in the correct container for proper management. Keep in mind that batteries can not be deposited indiscriminately together with household waste. Consider recycling according to the manufacturer's guidelines. With this gesture, it will help reduce the risks to your health and preserve the environment. If you have any questions, check with your municipality or distributor to request the essential details regarding recycling of your old device. No. REI-RPA 1201-RD.106 / 2008. Observations: - You should always wear a helmet and safety guards to avoid personal injuries in the event of falls. - It is designed to be used by anyone from 14 years of age with adult supervision. - SmartGyro is not responsible for the misuse that the user makes with this product. It is important that you strictly follow the security measures of this manual. - Does the unit include special felt guards to be placed on the metal part of the Go-Kart so that it does not scratch or mark the Hoverboard.smartgyro.es Go-Kart- Manual