DS2TD213610VP - Surveillance Camera Hikvision - Free user manual and instructions

USER MANUAL DS2TD213610VP Hikvision

Thermal Network Bullet Camera Quick Start GuideSymbols and Marks Notice Warning Forbidden Correct Incorrect Turn to page A and continue.

i. Accessories applicable to some models only

ii. Variable types and quantities

iii. Skip this step if not applicable

MicroSD card Grounding Disposal Other situationsA. B.C. D.E. F.G.1x1x

i. Accessories applicable to

ii. Variable types and

required. Warning MicroSD card Forbidden Grounding Correct Disposal Incorrect Purchase separately Turn to page A and continue. Other situations Activate and Access Network Camera Scan the QR code to get Activate and Access Camera. Note that mobile data charges may apply if Wi-Fi is unavailable.2 Reset and Restore Camera Press Reset button for about 10 s when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, port No., etc. User Manual & FAQ For more detailed instructions, scan the QR code below see the user manual. The function may vary according to different camera models. Take the actual product for reference. Thermal Network Bullet Camera Bi-spectrum Network Bullet Camera FAQ Regulatory Compliance and Safety Information Read all information and instructions in this documentcarefully before using the device and keep it forfurther reference.For more device information and instructions, pleasevisit our website at https://www.hikvision.com.You can also refer to other documents (if any)accompanying the device or scan the QR code (if any)on the packaging to get more information. ©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this ManualThe Manual includes instructions for using andmanaging the Product. Pictures, charts, images and allother information hereinafter are for description andexplanation only. The information contained in theManual is subject to change, without notice, due tofirmware updates or other reasons. Please find thelatest version of this Manual at the Hikvision website(https://www.hikvision.com).Please use this Manual with the guidance andassistance of professionals trained in supporting theProduct.Trademarksand other Hikvision's trademarksand logos are the properties of Hikvision in variousjurisdictions.Other trademarks and logos mentioned are theproperties of their respective owners.DisclaimerTO THE MAXIMUM EXTENT PERMITTED BYAPPLICABLE LAW, THIS MANUAL AND THE PRODUCTDESCRIBED, WITH ITS HARDWARE, SOFTWARE ANDFIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALLFAULTS AND ERRORS”. HIKVISION MAKES NOWARRANTIES, EXPRESS OR IMPLIED, INCLUDINGWITHOUT LIMITATION, MERCHANTABILITY,SATISFACTORY QUALITY, OR FITNESS FOR APARTICULAR PURPOSE. THE USE OF THE PRODUCT BYYOU IS AT YOUR OWN RISK. IN NO EVENT WILLHIKVISION BE LIABLE TO YOU FOR ANY SPECIAL,CONSEQUENTIAL, INCIDENTAL, OR INDIRECTDAMAGES, INCLUDING, AMONG OTHERS, DAMAGESFOR LOSS OF BUSINESS PROFITS, BUSINESSINTERRUPTION, OR LOSS OF DATA, CORRUPTION OFSYSTEMS, OR LOSS OF DOCUMENTATION, WHETHERBASED ON BREACH OF CONTRACT, TORT (INCLUDINGNEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, INCONNECTION WITH THE USE OF THE PRODUCT, EVENIF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITYOF SUCH DAMAGES OR LOSS.YOU ACKNOWLEDGE THAT THE NATURE OF THEINTERNET PROVIDES FOR INHERENT SECURITY RISKS,AND HIKVISION SHALL NOT TAKE ANYRESPONSIBILITIES FOR ABNORMAL OPERATION,PRIVACY LEAKAGE OR OTHER DAMAGES RESULTINGFROM CYBER-ATTACK, HACKER ATTACK, VIRUSINFECTION, OR OTHER INTERNET SECURITY RISKS;HOWEVER, HIKVISION WILL PROVIDE TIMELYTECHNICAL SUPPORT IF REQUIRED.YOU AGREE TO USE THIS PRODUCT IN COMPLIANCEWITH ALL APPLICABLE LAWS, AND YOU ARE SOLELYRESPONSIBLE FOR ENSURING THAT YOUR USECONFORMS TO THE APPLICABLE LAW. ESPECIALLY,YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT INA MANNER THAT DOES NOT INFRINGE ON THE RIGHTSOF THIRD PARTIES, INCLUDING WITHOUT LIMITATION,RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTYRIGHTS, OR DATA PROTECTION AND OTHER PRIVACYRIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANYPROHIBITED END-USES, INCLUDING THEDEVELOPMENT OR PRODUCTION OF WEAPONS OFMASS DESTRUCTION, THE DEVELOPMENT ORPRODUCTION OF CHEMICAL OR BIOLOGICALWEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATEDTO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEARFUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTSABUSES.IN THE EVENT OF ANY CONFLICTS BETWEEN THISMANUAL AND THE APPLICABLE LAW, THE LATTERPREVAILS.3 These clauses apply only to the products bearing the corresponding mark or information. FCC Compliance Statement Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. EU/UK Compliance Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Directive 2014/30/EU (EMCD) and Directive 2011/65/EU (RoHS). Note: The products with the input voltage of within 50 to 1000 VAC or 75 to 1500 VDC comply with Directive 2014/35/EU (LVD), and the rest products comply with Directive 2001/95/EC (GPSD). Please check the specific power supply information for reference. This product and - if applicable - the supplied accessories too are marked with "UKCA" and comply therefore with the following directives: Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. Directive 2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. According to the Waste Electrical and Electronic Equipment Regulations 2013: Products marked with this symbol cannot be disposed of as unsorted municipal waste in the United Kingdom. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. Directive 2006/66/EC and its amendment 2013/56/EU (Battery Directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. According to the Batteries and Accumulators (Placing on the Market) Regulations 2008 and the Waste Batteries and Accumulators Regulations 2009: This product contains a battery that cannot be disposed of as unsorted municipal waste in the United Kingdom. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info. Industry Canada ICES-003 Compliance This device meets the CAN ICES-003 (B)/NMB-003(B) standards requirements. Safety Information Please read all the safety information carefully before using. Laws and Regulations In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Transportation ● Keep the device in original or similar packaging while transporting it. ● Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities. ● DO NOT drop the product or subject it to physical shock. Keep the device away from magnetic interference. Power Supply ● Please purchase the charger by yourself. Input voltage should meet the Limited Power Source with 12 VDC, or PoE (802.3af) according to the IEC62368 standard. Please refer to technical specifications for detailed information. ● Make sure the plug is properly connected to the power socket. ● The socket-outlet shall be installed near the equipment and shall be easily accessible. ● DO NOT connect multiple devices to one power adapter, to avoid over-heating or fire hazards caused by overload. ● DO NOT touch the bare metal contacts of the inlets after the circuit breaker is turned off. Electricity still exists.4 ● + identifies the positive terminal(s) of equipment which is used with, or generates direct current. - identifies the negative terminal(s) of equipment which is used with, or generates direct current. Battery ● Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Il y a risque d'explosion si la batterie est remplacée par une batterie de type incorrect. Mettre au rebut les batteries usagées conformément aux instructions. ● The built-in battery cannot be dismantled. Please contact the manufacture for repair if necessary. ● For long-term storage of the battery, make sure it is fully charged every half year to ensure the battery quality. Otherwise, damage may occur. ● This equipment is not suitable for use in locations where children are likely to be present. ● Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). ● Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. ● DO NOT leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. ● DO NOT subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. Supplement Light ● The beam of the light at the distance of 200 mm is classified as Risk Group 1 (RG1). Possible hazardous optical radiation emitted from this product. ● DO NOT stare at operating light source. May be harmful to the eyes. ● Wear appropriate eye protection or turn on the supplement light only at a safe distance (0.4 m) or in the area that is not directly exposed to the light when installing or maintaining the device. Installation ● Never place the equipment in an unstable location. The equipment may fall, causing serious personal injury or death. ● This equipment is for use only with corresponding brackets. Use with other (carts, stands, or carriers) may result in instability causing injury. System Security ● You acknowledge that the nature of Internet provides for inherent security risks, and our company shall not take any responsibilities for abnormal operation, privacy leakage or other damages resulting from cyber attack, hacker attack, however, our company will provide timely technical support if required. ● Please enforce the protection for the personal information and the data security as the device may be confronted with the network security problems when it is connected to the Internet. Please contact us when the device might exist network security risks. ● Please understand that you have the responsibility to configure all the passwords and other security settings about the device, and keep your user name and password. Maintenance ● If the product does not work properly, please contact your dealer or the nearest service center. We shall not assume any responsibility for problems caused by unauthorized repair or maintenance. ● A few device components (e.g., electrolytic capacitor) require regular replacement. The average lifespan varies, so periodic checking is recommended. Contact your dealer for details. ● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary. ● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired. ● To reduce the risk of fire, replace only with the same type and rating of fuse. ● The serial port of the equipment is used for debugging only. Using Environment ● Make sure the running environment meets the requirement of the device. The operating temperature shall be -40 °C to 65 °C (-40 °F to 149 °F), and humidity shall be 5% to 95%. ● Place the device in a dry and well-ventilated environment. ● DO NOT expose the device to high electromagnetic radiation or dusty environments. ● DO NOT aim the lens at the sun or any other bright light. ● The equipment shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the equipment. ● No naked flame sources, such as lighted candles, should be placed on the equipment. ● Provide a surge suppressor at the inlet opening of the equipment under special conditions such as the mountain top, iron tower, and forest. ● Burned fingers when handling the parts with symbol . Wait one-half hour after switching off before handling the parts. Emergency ● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center. Manufacture Address No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China Hangzhou Hikvision Digital Technology Co., Ltd. COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various countries or regions, including without limitation, the United States, European Union, United Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your professional legal or compliance expert or local government authorities for any necessary export license requirements if you intend to transfer, export, re-export the thermal series products between different countries.5 Français Câble et interface N° Fonction N° Fonction 1 Bouton de réinitialisation 7 Câble d’alarme 2 2 Carte mémoire 8 Câble d’alarme 1 3 Port série de débogage 9 Câble RS-485 4 Câble CVBS 10 Câble d’alimentation CC 5 Entrée audio 11 Ethernet 6 Sortie audio Symboles et marques Attention

(INCLUSIEF NALATIGHEID),

NEEMT VOOR ABNORMALE WERKING,

PRODUCT IN OVEREENSTEMMING MET ALLE

NUCLEAR EXPLOZIV SAU NESIGUR AL

Directive 2006/66/EC