WS Office 801 E - Safe Burg Wächter - Free user manual and instructions

Technical Specifications	Internal dimensions: 320 x 230 x 200 mm
Capacity	Volume: 14.7 liters
Weight	Weight: 10 kg
Locking System	Double-bit key
Usage	Ideal for storing important documents and valuables
Maintenance	Regularly check the locking mechanism and lubricate if necessary
Security	Theft resistance, compliant with safety standards
General Information	2-year warranty, available in multiple colors

Frequently Asked Questions - WS Office 801 E Burg Wächter

How do I open the Burg Wächter WS Office 801 E safe if I forgot the code?

To open the safe if you forget the code, you must use the emergency key provided with the product. If you don\u0027t have it, contact Burg Wächter customer service for assistance.

What type of battery should I use for the safe?

The Burg Wächter WS Office 801 E safe uses AA batteries. Make sure to replace the batteries as soon as you notice a decrease in lock performance.

What should I do if the safe doesn\u0027t open after entering the correct code?

First, check that the batteries are not dead. If the batteries are in good condition, try resetting the safe according to the manual instructions. If the problem persists, contact customer service.

How do I fix the safe to the wall or floor?

The safe is equipped with fixing holes. Use plugs and screws suitable for the type of surface (wall or floor) on which you want to fix it. Make sure the safe is securely fastened.

Is the safe fire resistant?

The Burg Wächter WS Office 801 E is not specifically designed as a fireproof safe. For fire protection, consider purchasing a certified fire-resistant model.

How do I change the safe\u0027s access code?

To change the code, open the safe and follow the instructions in the user manual. Generally, this involves entering the current code, then following the steps to set a new code.

What is the warranty for the Burg Wächter WS Office 801 E safe?

The safe is generally covered by a 2-year warranty against manufacturing defects. Keep your proof of purchase for any claims.

Is the safe water resistant?

The Burg Wächter WS Office 801 E is not designed to be water resistant. Avoid exposing it to moisture or damp environments.

How do I clean the outside of the safe?

Use a soft, dry cloth to wipe the outside of the safe. Avoid abrasive or harsh cleaners that could damage the finish.

USER MANUAL WS Office 801 E Burg Wächter

180^
EUNC:
TONE:

1,2,3 4,5,6

USER.0003 FP

erfolg. angelegt

( \left\lbrack {{10} : {12}}\right\rbrack \Rightarrow \left\lbrack {{10} : {13}}\right\rbrack \Rightarrow \left\lbrack {{10} : {14}}\right\rbrack \Rightarrow \left\lbrack {{10} : {15}}\right\rbrack \Rightarrow \left\lbrack {{10} : {16}}\right\rbrack \Rightarrow \left\lbrack {{10} : {17}}\right\rbrack \Rightarrow \left\lbrack {{10} : {18}}\right\rbrack \Rightarrow \left\lbrack {{10} : {19}}\right\rbrack \Rightarrow \left\lbrack {{10} : {20}}\right\rbrack \Rightarrow \left\lbrack {{10} : {21}}\right\rbrack \Rightarrow \left\lbrack {{10} : {22}}\right\rbrack \Rightarrow \left\lbrack {{10} : {23}}\right\rbrack \Rightarrow \left\lbrack {{10} : {24}}\right\rbrack \Rightarrow \left\lbrack {{10} : {25}}\right\rbrack \Rightarrow \left\lbrack {{10} : {26}}\right\rbrack \Rightarrow \left\lbrack {{10} : {27}}\right\rbrack \Rightarrow \left\lbrack {{10} : {28}}\right\rbrack \Rightarrow \left\lbrack {{10} : {29}}\right\rbrack \Rightarrow \left\lbrack {{10} : {30}}\right\rbrack \Rightarrow \left\lbrack {{10} : {31}}\right\rbrack \Rightarrow \left\lbrack {{10} : {32}}\right\rbrack \Rightarrow \left\lbrack {{10} : {33}}\right\rbrack \Rightarrow \left\lbrack {{10} : {34}}\right\rbrack \Rightarrow \left\lbrack {{10} : {35}}\right\rbrack \Rightarrow \left\lbrack {{10} : {36}}\right\rbrack \Rightarrow \left\lbrack {{10} : {37}}\right\rbrack \Rightarrow \left\lbrack {{10} : {38}}\right\rbrack \Rightarrow \left\lbrack {{10} : {39}}\right\rbrack \Rightarrow \left\lbrack {{10} : {40}}\right\rbrack \Rightarrow \left\lbrack {{10} : {41}}\right\rbrack \Rightarrow \left\lbrack {{10} : {42}}\right\rbrack \Rightarrow \left\lbrack {{10} : {43}}\right\rbrack \Rightarrow \left\lbrack {{10} : {44}}\right\rbrack \Rightarrow \left\lbrack {{10} : {45}}\right\rbrack \Rightarrow \left\lbrack {{10} : {46}}\right\rbrack \Rightarrow \left\lbrack {{10} : {47}}\right\rbrack \Rightarrow \left\lbrack {{10} : {48}}\right\rbrack \Rightarrow \left\lbrack {{10} : {49}}\right\rbrack \Rightarrow \left\lbrack {{10} : {50}}\right\rbrack \Rightarrow \left\lbrack {{10} : {51}}\right\rbrack \Rightarrow \left\lbrack {{10} : {52}}\right\rbrack \Rightarrow \left\lbrack {{10} : {53}}\right\rbrack \Rightarrow \left\lbrack {{10} : {54}}\right\rbrack \Rightarrow \left\lbrack {{10} : {55}}\right\rbrack \Rightarrow \left\lbrack {{10} : {56}}\right\rbrack \Rightarrow \left\lbrack {{10} : {57}}\right\rbrack \Rightarrow \left\lbrack {{10} : {58}}\right\rbrack \Rightarrow \left\lbrack {{10} : {59}}\right\rbrack \Rightarrow \left\lbrack {{10} : {60}}\right\rbrack \Rightarrow \left\lbrack {{10} : {61}}\right\rbrack \Rightarrow \left\lbrack {{10} : {62}}\right\rbrack \Rightarrow \left\lbrack {{10} : {63}}\right\rbrack \Rightarrow \left\lbrack {{10} : {64}}\right\rbrack \Rightarrow \left\lbrack {{10} : {65}}\right\rbrack \Rightarrow \left\lbrack {{10} : {66}}\right\rbrack \Rightarrow \left\lbrack {{10} : {67}}\right\rbrack \Rightarrow \left\lbrack {{10} : {68}}\right\rbrack \Rightarrow \left\lbrack {{10} : {69}}\right\rbrack \Rightarrow \left\lbrack {{10} : {70}}\right\rbrack \Rightarrow \left\lbrack {{10} : {71}}\right\rbrack \Rightarrow \left\lbrack {{10} : {72}}\right\rbrack \Rightarrow \left\lbrack {{10} : {73}}\right\rbrack \Rightarrow \left\lbrack {{10} : {74}}\right\rbrack \Rightarrow \left\lbrack {{10} : {75}}\right\rbrack \Rightarrow \left\lbrack {{10} : {76}}\right\rbrack \Rightarrow \left. {\vdots }\right) .

1,2,3 1,3,4 2,3,4 3,4,5 4,5,6 5,6 6,7 7,8 .

。

egt

FUNC: <

egt

m = 311

FUN

m = 311 ;

2: FUNC: <

USER6001

一
1:2 FUNC:M

Menu Administrator/Setup/FP-Reset

INFO

System Info Systemcheck

1:2: FUNC:

FF ✔ ADC 5.45V ✔ Flash ✔ touch con.

2:7 FUNC: M

Fehlermeldungen

The numbers 1^ - 0^ are used for Input e.g. when entering the code.

C 'Func'key

Multifunction key which adapts to perform several functions, including: Go back one menu level, delete a entered character, show the Main menu. The display shows the current function of the key (see section 3).

D 'On/Enter'key

The On/Enter key starts the system or selects the current menu item.

"1key

The key can be used to scroll up if there are several menu options. If this is possible, the display shows this (see section 3).

F"2"key

The key can be used to scroll down if there are several menu options. If this is possible, the display shows this (see section 3).

Fingerprint sensor

Fingerprints can be stored via the fingerprint sensor and used to open the safe.

Dear customers:

Thank you for choosing a safe with a BURG-WACHTER SecuTronic lock. This electronic lock is certified according to ECR-5 Class B. You have purchased a product that meets extremely high security requirements and was developed and produced according to current technical standards. This lock is certified according to EN 1300:2018. (Classification of high-security locks according to their resistance to unauthorized opening).

Important: Please read the entire Instruction manual before programming and keep this manual safe so that you can revisit it at a later date.

We hope you enjoy your new BURG-WACHTER safe. Your Burg-Wachter KG

General information

Activation

The electronics are switched on using the key on the keyboard. This then lights up. At the same time, the display shows the BURG WACHTER logo for a moment before the input graphic for the pin code or fingerprint appears.

Languages

The menu navigation In the display is available in twelve languages and can be set via the "Languages" menu. Please refer to chapter "Menu Language" for a detailed explanation.

Authorisation request

A valid pin code must also be entered to open the door with a fingerprint.

Background:

Fingerprints do not receive full access rights in the current software version. Full access rights are required to authorise the opening and unlock the safe. Consequently, a valid pin code of a second user is required. During the process of creating a user pin code, a prompt asks whether the access right should also require a fingerprint. If the user selects yes, the pin code is automatically downgraded to a half-access right. This pin code now requires a pin code or fingerprint from a different authorised user. A pin code and fingerprint from the same user will not be accepted. If you choose not to require a fingerprint when creating a pin code, it will keep full access rights and a second user is not required to open the safe.

Blocking times

To protect against tampering, the lock electronics block access to the safe for five minutes if an incorrect pin code has been entered three times in succession. Then, for every further incorrect entry, ten minutes. During this blocking time, the remaining time on the display runs countdown. It is not possible to open the safe during this period, even with a valid user or administrator code.

Increasing burglary protection

Please take care to ensure codes do not fall into the wrong hands. Therefore, store the codes in a safe location so that they can only be accessed by authorised persons. In the event you lose a code, the lock must be set to a new code.

The factory code must be changed as soon as the lock is commissioned.
- Check out any baby/child (e.g. 1-, 2-, 3-, 4-, 5-, 6-, 7-, 8-, 9-, 10-, 11-, 12-, 13-, 14-, 15-, 16-, 17-, 18-, 19-, 20-, 21-, 22-, 23-, 24-, 25-, 26-, 27-, 28-, 29-, 30-, 31-, 32-, 33-, 34-, 35-, 36-, 37-, 38-, 39-, 40-, 41-, 42-, 43-, 44-, 45-, 46-, 47-, 48-, 49-, 50-, 51-, 52-, 53-, 54-, 55-, 56-, 57-, 58-, 59-, 60-, 61-, 62-, 63-, 64-, 65-, 66-, 67-, 68-, 69-, 70- assessed with knowledge of the code owner must not be used as a code.
After changing the code, the lock must be checked several times with the safety door opened

Attention: All changes to the administrator code, the factory code and the user code must be carried out with the safe door open! After changing a code, the lock must be operated several times with the new code with the safe door open.

Input options

Number keys:

The numbers 1^ - 0^ are used for input e.g. when entering the code.

"Func" key:
Multifunction key which adapts to perform several functions, including: Go back one menu level,
delete a entered character show the Main menu. The display shows the current function of the key.

"On/Enter" key:

The "On/Enter" button starts the system or selects the current menu item.

Keys"1" and "2";
In menus, you can scroll up and down using these keys.
If this is possible, the display shows this with the corresponding arrows.

Fingerprint sensor:

Fingerprints can be stored via the fingerprint sensor or used to open the safe

Display

A Specifies whether you can use the key to cancel the last entry ( or switch to the main menu [M].

MAIN MENU

Code change Language/Sprache Administrator...

Info

答2 一 一 appears when you can scroll down using the "2" key.
C{1:1}appears when you can scroll up using

D ( )indicates the battery level.
E (^ / b) indicates whether the locking mechanism has released the lock and the safe can be opened.

CODE / Fingerp.

A FUNC: M

Opening

Opening with PIN code

• Switch on the lock using the key.
  Enter the 6-digit PIN code (factory setting '1-2-3-4-5-6').
  "Please fun the knoep appears in the display

Opening with fingerprint

• Switch on the lock using the key.

Move a programmed finger from the top to bottom centrally over
the sensor.
The message "Validity not achieved" appears on the display.
Enter a valid 6-digit pin code (Factory setting 1-25-4-3-4) or another user. "Please turn the light" appears in the display
Turn the knob.

Closing

After the safe has been closed, it is essential that the rotary knob is moved manually to its initial position. Ensure that the rotary knob is in the same position as in the following illustration.

Menu structure

Setting up the menu structure

Change code

Language

• Administrator

User

Create

Create code
Create fingerprint

Assign
Assign code
Assign fingerprint

Delete

Time functions

Settime
Set date
Automatic ST/WT
Delay time

Programming

Database update
Firmware update

Reorganise

Save

Processes

Setup

Register
FP reset
Generate AES key

info

Systeminfo
System check

Description of the menu functions

Code Change menu

Change the administrator code and the user codes. We would like to point out that, for security reasons, the factory set administrator code must be changed to an individually set code.

• Switch on the lock using the -key.
  Then press F#k. The #
  The Man can appears.
• Confirm with
• You can use the keys 1 or 2 to scroll until the administrator/user is displayed and you wish to change the code for.
• Confirm with
• Enter the old or factory code that was previously valid using the keyed or press in.
• Enter the new code using the keypad and confirm with.
  Repeat your entry and confirm it again with.
  Code change completed is displayed after a correct entry.
• Press any key.

Note: When a safe lock is first started up, additional information on the current date and time are requested:

Enter the day (2 digits)
Enter the month (2 digits)
Enter the year (2 digits)
- Enter the hour (2 digits) - Enter the minutes (2 digits)

Language menu

• Switch on the lock using the key.
  Then press Func.
  The "Maw menu" appears.
• Scroll with the 1 or 2 key until the "Language"
  menu item is high
• Confirm with
• "Maw menu/lanuoge" appears.
• Use keys 1 or 2 to scroll until the desired
  language is mark
• Confirm with
• "Dota has been saved" appears in the display
• Press any key.

MAIN MENU

info comtnx 1

Code change
Language/Sprache
Administrator...

1:2: FUNC:

LANGUAGE

C

Deutsch

English

espa7ol

A

1:2: FUNC:

Administrator menu

This menu has several sub-menus to group functions. The functions within this section can only be fully used with the administrator code.

MAIN MENU

Code change
Language/Source
Administrator

• 1:2: FUNC: < Confirm with

• "Man menu/Administrator/User/Create finger"appears.

• Scroll with the 1 or 2 key until the "Create"
  fingerprint* menu item is highlighted.

• Confirm with
  Enter the administrator code to acquire the
  authorisation for programming.
• "Programm fangr appears.
• Move the finger from the top to bottom
  centrally and a number of times over the sensor.
  The display will either prompt you to repeat
  the process (for error messages, see page 15),
  Create or the message "USR.XXX.P content" will appear.
  Assign | Press any key.
  F
  Assien

B.

555002163

330001C

Combination:

JFPL

FUNC:M

Menu Administrator / User

Menu Administrator / User / Create

Created users can open the safe.

See page 9 for information on validity.

Sub-menu Administrator / User / Create /

Create code
- Switch on the lock using the key.
- Then press Fuc.
The 'Hot menu' appears.
- Scroll with the 1 or 2 key until the "Administrator" menu item is highlighted.
- Confirm with
"Maxmena/Admnistator appears
- Confirm with 25.
*Mm menu/Admaichatoe/User appears.
- Confirm with
"Main menu/Admiachator/user/Create appears.
- Confirm with dt .
- Enter the administrator code to acquire the

authorisation for programming.

USER

Date

2: FUNC:

#

5EB0001CD

L

JFPL

FUNC:M

#

H股1000GCHD

569.125

Kombination:

[2]

m : x = 1 或 3x + 4y + 1 = 0

1

12

USER.DOOI.CD

Created:

FUNC:

CinlarFerdn

Create Circle Create Finger

2.2.10.1

1:▲ FUNC:

Programfinger

1

1

FONC:

USEB.0003.P

crea

一

1 + 2( 1 + u) 1 - 21 u > 0

JNC: <

一

JNC: <

Menu Administrator / User / Assign

Users can have a code and a fingerprint.

See page 9 for information on validity.

Sub-menubadministrator/User/Assignn/

Create code

Switch on the lock using the key.
Then press
The "Mow" appears.
- Scroll with the 1 or 2 key until the "administer"
menu item is highlighted.
: Confirm with
“*”
+Confirm with

• Scroll with the 1 or 2 key until the

menu item is highlighted

A

一

Cannnnnne nnnnnnne nee 7aee aae eeppe

-Enter the administrator code to acquire the

authorisation for programming

You can use the keys 1 or 2 to scan

the user is marked whose code is supported

the user is marked whose code is supposed to be input.

to be assigned to

-5oter the 6 chll code and confirm it with
- Use a single, single-cell telephone with a 100-kW computer - Use less than 100 kW to scan through the possible 20 combinations.
If you have not selected a combination,
confirm 3x with

Sub-menubrator/User/Assign/Assign fingerprint
- Switch on the lock using the key.
- Then press Func.
The 'Mai menu appears.
- Scroll with the 1 or 2 key until the menu
item"Adminstrator"is highlighted
- Confirm with
- "Mav memu/Attnmator" appears.
- Confirm with
"Mac menu/Administatx/User appears.
- Scroll with the 1 or 2 key until the "assign" button.
menu item is highlighted
- Confirm with -
- Scroll with the 1 or 2 key until the "AspenZiger" menu item is highlighted.
F
- Enter the administrator code to acquire the authorization for personnel.
the authorisation for programing. "Munenw (Amnnter / lir / sienf) apors
- Use the keyboard to select the text.
the user is marked whose fingerprint is
supposed to be assigned.
Confirm with 0
"Create fingerprint" appears.
- Move the finger from the top to bottom
centrally and a number of times over the sensor.
- The display will either prompt you to repeat the process (for error messages, see page 15), or the message "05E.0000 FP created!" will appear.
Press any key.

Menu Administrator / User/Delete

Deleted users no longer have access to the safe. However, these remain in the history.

Sub-menubnistrator/User/Delete

• Switch on the lock
• Then press
  The "How many" appears.
• Scroll with the 1 or 2 key until the menu
  item "Adminsistry" is highlighted
• Confirm with 0
  "Maunmua/Admnnty"appears.
• Confirm with
  "Mat menu/Admnshator/Use appears.
• Confirm with
  "Man menu/Administrator/Server/Deteappears.
• Scroll with the 1 or 2 key until the menu
  item "Delete" is highlighted.
• Confirm with
• Enter the administrator code to acquire the authorisation for programming.
• You can use the keys 1 or 2 to scroll until the user is marked whose code is supposed to be deleted.
• Confirm with
  Data has been deleted" appears.
• Press any key.

Menu Administrator / Time functions

Time and date can be set, as well as whether the system should automatically switch between Central European Summer/Winter Time. The delay time prevents quick opening in the event of a robbery.

Menu Administrator / Time functions / Set time

• Switch on the lock using the key.
  Then press type.
  The Main menu appears.
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
  Confirm with
• Mai menu/Admnator appears.
• Scroll with the 1 or 2 key until the menu
  e
  ·Confirm with
  Administatian/INMEny appears.
• Confirm with
• Enter the administrator code to acquire
  The authorisation for programming
  The time (24-hour format) can be set via
  the keypad.
• Confirm with
  Data has been saved! appears.
• Press any key.

Menu Administrator / Time functions / Set date Menu Adminis

• Switch on the lock using the key.
• Then press fun.
  The "dot menu" appears.
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
• Confirm with
• "Mam menu / Administats" appears.
• Scroll with the 1 or 2 key until the menu
  item "Time functions" is highlighted
• Confirm with on
  The functions appear.
• Scroll with the 1 or 2 key until the "Date entry" menu item is highlighted.
• Confirm with
• Enter the administrator code to acquire the authorisation for programming.
  The date can be set via the keypad.
• Confirm with 20.
• "Dots has been saved!" appears.
  Press any key.

Time entry Data entry
Autumn STANT
Auto: 3/1790 Time:

A

( x - 2x) t - xy^2 = ( x - 2x) f^ t

A

• Scroll with the 1 or 2 key until the menu item

FUNC:M Time functions" is highlighted.

• Confirm with

Tne functions appears.

• Scroll with the 1 or 2 key until the

• menu item "Why time" is highlighted.

• Confirm with

Enter the administrator code to acquire the

authorisation for programming. Where a delay

m STWT time has already been set, it must hrs

through
The delay time (0-99 minutes) can be set
TIMER FUN... via the keyboard.
Time entry Confirm with
Date entry -Dto has been saved" appears.
Autom ST/WT Press any key.
through
The delay time (0-99 minutes) can be set
viathekeyboard.
- Confirm with
"Data has been saved!" appears.
- Press any key.

tor / Delay time

The delay time sets up a required waiting time before a function is performed and can consequently prevent quick opening in the event of a robbery. After the delay time has elapsed, a valid and fully authorised entry must be repeated in order to gain access.

• Switch on the lock using the key.
  The press
  The "main menu" appears.
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
• Confirm with
  "Administrator" appears.
• Scroll with the 1 or 2 key until the menu item
  Time functions" is highlighted.
• Confirm with
  Time functions appear.
• Scroll with the 1 or 2 key until the text is visible.
• menu item "daytime" is highlighted.
• Confirm with
  Enter the administrator code to acquire the
  authorisation for programming. Where a delay
  time has already been set, it must hirs

Menu Administrator / Programming

A firmware update installs the latest software version. Reorganise sorts the database.

Time:

Time entry Data entry

Autom ST/WT

Delay time

Delay time
[00]min
13/14

FL

User
Time: 19:30
Programming
Processes

1 + u7 = 70%

update

PROGRAM
Database update
Firmwareupdate
Restructure

Menu Administrator / Programming / Firmware update

Please ensure that the batteries are full before
updatng the firmware.
+ Please copy the new firmware version to
a FAT-32 formatted microSD card and insert it
into the microSD c
- Switch on the lock using the key.
The press
The "Moin men" appears.
- 500 with the 1 or 2 key until the menu
Item "Administer" is highlighted.
+ Confirm with On
+ "Administator" appear
- Scroll with the 1 or 2 key until the
"Programming" menu item is highlighted.
Confirm with
- Programming appears.
- Scroll with the 1 or 2 key until the menu
item "famware" is highlighted.
Confirm with on
- Enter the administrator code to acquire the
authorisation for programming.
The message Confirm current original manufacturer
mnnnne ernnn nucog nner appears.
Confirm with 0 Thereafter there is no
need to do anything further in the process.
The message "do not interrupt power" appears.
The message on the display disappears for
some time.
- When the update is complete, the message
"finnooreapate completed appears.

Databaseupdate
Firmwaredale
Restructure

Menu Administrator / Programming / Reorganise

Reorganisation must be carried out cyclically in
order to optimise the user database and restructure
the user data records.

• Switch on the lock using the key.
  The press
  The "Koinmew" appears.
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
  ·Confirm with
• "Administrative" appror
• Scroll with the 1 or 2 key until the
  "Programming" menu Item is highlighted.
• Confirm with 06
  Programming appears.
• Scroll with the 1 or 2 key until the menu
  item 'Restructuring' is highlighted.
• Confirm with
• Enter the administrator code to acquire
  the authorisation for programming.
• "Restructuring in progress" appears.

Menu Administrator / Processes

It is possible to store the history on an inserted microSD card or to output it directly on the display.

Menu Administrator / Setup

The system must be registered for communication within the device. FP-reset removes all fingerprints.

Menu Administrator / Processes / Displays

• Switch on the lock using the key.
• The press F_OK .
  The 'main menu' appears.
• Scroll with the 1 or 2 key until the menu item "Administerware" is highlighted.
• Confirm with
• "adibibilator" appears.
• Scroll with the 1 or 2 key until the menu is visible.
• Confirm with
  -Comml Ww
• Enter the administrator code to acquire the administration rights.
  the authorisation for programming.
• Scroll with the 1 or 2 key through the
  dat
• Confirm with

Menu Administrator / Setup / Register

In the event of a complete system failure, the electronic control panel may have to be registered again with the locking mechanism.

• Switch on the lock using the key.
• The press 'Hnst'.
  The "Mam menu" appears.
• Scroll with the 1 or 2 key until the menu item "Commander" is highlighted.
  ·Confirm with
  "Administer appears.
• Scroll with the 1 or 2 key until the menu item "Set" is highlighted.
• Confirm with
• Enter the administrator code to acquire the authorisation for programming.
• "Dataset has been stored" appears in the display
• Press any key.

After registering, the administrator code must be changed as described in the Code Change menu.

Menu Administrator / Processes / Save

• Please insert a FAT-32 formatted microSD card into the microSD card slot.
• Switch on the lock using the key.
  The press
  The "my" appears.
• Scroll with the 1 or 2 key until the menu
  item "40mm" is highlighted.
  ·Confirm with
  一、《简要声明》
  A
• Scroll with the 1 or 2 key until the menu
  Item "Processes" is highlighted.
• Confirm with
  "Process appears.
• Scroll with the 1 or 2 key until the menu
  Item "Saw" is highlighted.
• Confirm with De.
• Enter the administrator code to acquire the authorisation for programming.
  "Please Wn't" appears.
• "Dotsct has been stored!" appears.
• Press any key.

Menu Administrator / Setup / FP-reset

• Switch on the lock using the key.
• The press function.
  The "Mow menu" appears
• Scroll with the 1 or 2 key until the menu item "administrator" is highlighted.
  · Confirm with
  ·“Administart”appears.
• Scroll with the 1 or 2 key until the menu item "Set" is highlighted.
  Confirm with
  Scroll with the 1 or 2 key until the menu item "FP" is highlighted.
• Confirm with
• Enter the administrator code to acquire the authorisation for programming.
  "aeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeaeae
• Confluent with 0
  "Poore wot" appears
  Press any key.

Menu Administrator / Setup /Generate AES key

This function is not enabled at present.

In this menu, you can have several pieces of information of the system displayed.

Menu info / System Info

• Switch on the lock using the key.
  The press
  The Man may appear.
• Scroll with the 1 or 2 key until the menu
  item"09" is highlighted.
  Confirm with
  ：
• Confirm with

Enter the administrator code to acquire
the authorisation for programming.
The system information is displayed.
- Scroll with key 1 or 2 to view the information.
Use the key to return

Info/system check menu

• Switch on the lock using the key.
  The press
  The "Maien" appears.
• Scroll with the 1 or 2 key until the menu item "mpt" is highlighted.
  Confirm with
• *in# appears
• Scroll with the 1 or 2 key until the menu item
  "Streptococci" is highlighted.
• Confirm with.
• Enter the administrator code to acquire the authorisation for programming.
  The system check Information is di
• Scroll with key 1 or 2 to view the information.
  Use the key to return.

Error messages

The illustration below describes the error messages on the display when a fingerprint is created or when the safe is opened.

Error message Solution
Too fast! Please repeat	Move your finger slowly across the sensor.
Too tilted! Please repeat	Move your finger flat across the sensor.
Too short! Please repeat	Move your finger across the sensor so that more area of your fingerprint can be read.
Position in the middle and repeat!	Position your finger in the middle of the sensor.
Wrong code! Enter a valid code.
No admittance! An unsaved fingerprint has been used. Repeat with a fingerprint that has already been created.

Technical details

Number of administrator codes:	1
Number of user codes: 9 (max.)
Number of fingerprint codes:	20 (max.)
Blocking times: After an Internet connection, the correct code is entered every 3x, 5 minutes, thereafter always 10 minutes
Power supply: 4x AA MIGNON LR6 ALKALINE
Date/time:	✓
Updatable (firmware):	✓
History number: 2,000

Battery replacement

You can see the battery status at any time using the battery level indicator at the top right of the display. If the battery capacity is running low, a corresponding message appears on the display. When this notice appears, change the batteries as soon as possible.

Remove the screw on the underside of the lock electronics. This will require a Tox T8 screwdriver. This is included in the scope of delivery.

Let the cover slide out together with the batteries.

Remove the old batteries and dispose of them according to the disposal instructions on page 15. Replace the batteries with four new 1.5V AA Mignon batteries and according to the correct polarity. For this purpose, illustrations are shown on the battery holder. Please use branded batteries and no rechargeable batteries.

Push the cover and batteries back into the locking electronics and screw them tight.

Warranty

BURG-WACHTER products comply with the technical standards at the time of production and adhere to our own quality standards. The guarantee only covers defects which can be proved to have resulted from production or material defects at the time of purchase. The warranty ends after two years, further claims are excluded. Defects and damage caused by e.g. transport, Incorrect operation, Improper use, wear etc. are excluded from the warranty. The batteries are not included in the guarantee. A short description of any defects identified must be made in writing and the device returned to the place it was purchased, together with the original packaging. After the device has been tested, and within a appropriate period of time, the guarantor will decide whether or not to repair or exchange the item.

Attention:

In order to deliver a flawless and high quality product to you and to better assist you in case of service or repair, it is necessary that faulty or defective devices along with the valid administrator code be presented to your dealer together with the original documentation.

For returns, all undamaged device parts must furthermore be in the factory setting due to your right of revocation. Failure to comply with this will invalidate the warranty.

Disposal of the device

Dear customer,

please help us avoid unnecessary waste. Should you intend to dispose of this device at any time, please remember that many components of this device contain valuable materials that can be recycled.

Please be aware that electrical and electronic equipment and batteries marked in this way must not be disposed of with house hold waste but collected separately. Please obtain information on the collecting points for electrical waste from the responsible authority of your city/municipality.

BURG-WACHTER KG hereby declares that this device complies with the Directives 2014/30/EU, (EMC) and 2011/65/EU (RoHS).

The complete text of the EU Declaration of Conformity is available at the following Internet address: www.burg.biz

Safety recommendation

Please clean the keyboard operating surface periodically with a microfibre cloth (e.g. glasses cleaning cloth for spectacles) to remove any fingerprints on the keyboard surface.

Printing and typesetting errors as well as technical changes reserved.

Mode d'emploi

Montage

A Ecran

MAIN MENU
Code change
Language/Speech	Administrator...
Info

M.S.E.F

Create Assign Delete

2:V FUNC:€

USER.0001.CD

Correlation: [FP]

FUNC:M

Program finger ***G

FUNC: <

USB/ICC003.1P created!

FUNC:←

user
Create Assign Delete
1	2

Luser

Assign Code:

Assign Finger

2: FUNC: <

USB R.0003

1▲ 2▼ FUNC:MF

m = 311

trateur) apparait.

---

Validez aee

awmmingx(Progrannmation)apparal

Bereunisation'selfaffict

1

Ieae zse

e chieh pormattat do chilr cato opson

The authors' contributions are due to the following:

sianing in pss. * (Reoanisation en cour)

apparlt

+8407A（Administraturlapparalt

m = 311 ;

FUNG:

PONo.

USEB.0003.P

created!

FUNG-1

NC!

original firmware version with Fuster

version with filter

一

一

FUNC: M

A

12x - 1 > 0

FirmWareUpdate complate

comp

一

FUNC:

12x - 1 > 0

ganisatie

PROGRAMMING

Databasedale

Urcwareupdate

Restructure

三、备查文件

m = 311

1

2

( x - 2x) t - xy^2 = ( x - 2x) f^ t

In progress

m = 311

一

一

。

m = 311 ;

ai a ai 分母最小值为 k .

(1)

Menu Administrator/Handelingen