WS OfficeDoku 821 E FP - Safe Burg Wächter - Free user manual and instructions

Product type	Electronic safe with PIN code and fingerprint lock
Brand	Burg Wächter
Model	WS OfficeDoku 821 E FP
Power supply	4 AA Mignon LR6 alkaline batteries (1.5 V)
Number of user codes	9 maximum
Number of fingerprints	20 maximum
Number of administrator codes	1
Lockout time after errors	5 minutes after 15 incorrect entries
Event history	Up to 2000 entries
Time functions	Date/time setting, automatic summer/winter switching, programmable delay (0-99 min)
Display	LCD with battery level indication and navigation icons
Menu languages	12 languages, including French
Certification	EN 1300:2018 (class C), PCB certified
Firmware update	Possible via USB key (not included)
Encryption	AES 128-bit (key generation)
Warranty	2 years
Maintenance	Clean the keypad with a microfiber cloth
Possible opening	PIN code, fingerprint, combination of both

Frequently Asked Questions - WS OfficeDoku 821 E FP Burg Wächter

How to change the default factory code?

Activate the lock, go to the main menu, select Code change, then Administrator. Enter the factory code (1-2-3-4-5-6-7) and follow the instructions to set a new 6-digit code. Perform this operation with the door open.

What to do if I forgot my administrator code?

If you have lost the administrator code, you cannot reset the safe yourself. Contact the Burg Wächter after-sales service or a certified locksmith. The warranty may require proof of purchase and the administrator code for any repair.

How to add a new fingerprint?

Access the Administrator menu > User > Create > Register a fingerprint. Enter the administrator code, then slide your finger over the sensor as instructed. You can add up to 20 fingerprints.

How to open the safe with a code + fingerprint combination?

Activate the lock, slide your registered finger over the sensor. If you have set a combination, the message Enter authorization appears. Then enter the corresponding PIN code. The screen displays Thank you, operate the handle.

How to set the date and time?

Go to the Administrator menu > Time functions > Time setting or Date setting. Enter the administrator code, then enter the values (day, month, year, hour, minutes) using the keypad.

How to replace the batteries?

When the battery indicator is low, remove the Torx T15 screws under the electronics, slide off the cover, replace the 4 AA alkaline batteries respecting polarity. Use brand-name batteries, not rechargeable batteries. Close the cover and retighten screws.

What does the error message 'Too fast! Please repeat' mean?

This message appears during fingerprint enrollment or reading if you slide your finger too quickly over the sensor. Try again by sliding slowly and steadily.

How to delete an existing user?

In the Administrator menu > User > Delete, enter the administrator code, select the user to delete using the scroll keys, and confirm. The user is deleted but remains in the history.

How to activate the opening delay?

Go to Administrator > Time functions > Delay. Enter the administrator code, then set the delay from 0 to 99 minutes. Once activated, opening will be delayed by the set time.

What to do if the safe does not open with the correct code?

Check that the safe is not in lockout mode (5 minutes after 15 errors). Make sure you are entering the correct 6-digit code. If the problem persists, test with the door open, check the batteries, or contact after-sales service.

USER MANUAL WS OfficeDoku 821 E FP Burg Wächter

CcSting
Deutsch
English English

espanol

1 + u1 - 1 = ( 1 + u) u1 < 1 = u

1:2: FUNC:

Bender, Anthony; Ringler, Anthony

m = 311 ;

FENCA12

PUNC:爱2

bankupdate

PROGRAMMING

Daterbankkundate

FIMWANGYUAN

Reorganisierung

m - 1 0 ;

2: FUNC: <

m = 311
m = 311 ;

□适用√不适用

Date bankupdate Finmymy.

Prrnneepre Prrnnnneep

reergemrreer

Bergsundetra

lauit

---

---

Menu Administrator/Setup/FP-Reset

INFO

System Info Systemcheck

1:2: FUNC:

FF ✔ ADC 5.45V ✔ Flash ✔ touch con.

2:7 FUNC: M

Fehlermeldungen

The numbers 1^ - 0^ are used for Input e.g. when entering the code.

C 'Func'key

Multifunction key which adapts to perform several functions, including: Go back one menu level, delete a entered character, show the Main menu. The display shows the current function of the key (see section 3).

D 'On/Enter'key

The 'On/Enter' key starts the system or selects the current menu item.

"1key

The key can be used to scroll up if there are several menu options. If this is possible, the display shows this (see section 3).

F"2"key

The key can be used to scroll down if there are several menu options. If this is possible, the display shows this (see section 3).

Fingerprint sensor

Fingerprints can be stored via the fingerprint sensor and used to open the safe.

Dear customer,

Thank you for choosing a safe with a BURG-WACHTER SecuTronic lock. This electronic lock is certified according to ECB Class A. You have purchased a product that meets extremely high security requirements and was developed and produced according to current technical standards. This lock is certified according to EN 1300:2018. (Classification of high-security locks according to their resistance to unauthorized opening).

Important: Please read the entire Instruction manual before programming and keep this manual safe so that you can revisit it at a later date.

We hope you enjoy your new BURG-WACHTER safe. Your Burg-Wachter KG

General information

Activation

The electronics are switched on using the key on the keyboard. This then lights up. At the same time, the display shows the BURG WACHTER logo for a moment before the input graphic for the pin code or fingerprint appears.

Languages

The menu navigation in the display is available in twelve languages and can be set via the "Languages" menu. Please refer to chapter "Menu Language" for a detailed explanation.

Blocking times

To protect against tampering, the lock electronics block access to the safe for five minutes if an incorrect pin code or an incorrect fingerprint has been entered fifteen times in succession. During this blocking time, the remaining time on the display runs countdown. It is not possible to open the safe during this period, even with a valid user or administrator code.

Increasing burglary protection

Please take care to ensure codes do not fall into the wrong hands. Therefore, store the codes in a safe location so that they can only be accessed by authorised persons. In the event you lose a code, the lock must be set to a new code.

The factory code must be changed as soon as the lock is commissioned.
Code that are easy to guess (e.g. 1, -2, -3, -4, -5, -8) must not be used.
Personal data (e.g. birthdays) or other data that may be guessed with knowledge of the code owner must not be used as a code.
After changing the code, the lock must be checked several times with the safety door opened

Attention: All changes to the administrator code, the factory code and the user code must be carried out with the safe door open! After changing a code, the lock must be operated several times with the new code with the safe door open.

Input options

Number keys:

The numbers 1^ - 0^ are used for input e.g. when entering the code.

"Func" key:

Multifunction key which adapts to perform several functions, including: Go back one menu level,

delete a entered character show the Main menu. The display shows the current function of the key.

"On/Enter" key:

The "On/Enter" button starts the system or selects the current menu item.

Keys"1" and "2";

In menus, you can scroll up and down using these keys.

If this is possible, the display shows this with the corresponding arrows.

Fingerprint sensor:

Fingerprints can be stored via the fingerprint sensor or used to open the safe

Display

A Specifies whether you can use the key to cancel the last entry ( 心 ) or switch to the main menu [M].
2 · w appears when you can scroll down using the "2" key.
C 1 + appears when you can scroll up using the "1" key.
D ( )indicates the battery level.
E (^ / B) indicates whether the locking mechanism has released the lock and the safe can be opened.

Opening

Opening with PIN code

• Switch on the lock using the key.
• Enter the 6-digit PIN code (factory setting "1-2-3-4-5-6").
• Please turn the book" appears in the display

Opening with fingerprint (Convenient opening)

Switch on the lock using the key.
- Move a programmed finger from the top to bottom centrally over the sensor.
- Please run theADB appears in the display
Turn the knob.

Opening with access combinations

• Switch on the lock using the key.
• Move a programmed finger from the sensor.
• If an additional authorisation request (code or fingerprint) has been set up, the message "interim authorisation" will appear on the display. Enter the requested additional authorisation (code or fingerprint).
  If a threefold authorisation request (3 PIN codes) has been set up, the message 'Enter authorisation' will appear on the display. Enter the 6-digit PIN code.
• Please hore the knot" appears in the display
• Turn the knot

Closing

After the safe has been closed, it is essential that the rotary knob is moved manually to its initial position. Ensure that the rotary knob is in the same position as in the following illustration.

Menu structure

Setting up the menu structure

Change code
Language
- Administrator

Create

Create code

Assign

Create fingerprint

Assignn code

Assign fingerprint

Delete

Time function

Settime
Set date
Automatic ST/WT
Delay time

Programming

Database update
Firmware update
Reorganise

Processes
Display
Save

Setup

Register
FPreset
Generate AES key

+info

Systeminfo
System check

Description of the menu functions

Code Change menu

Change the administrator code and the user codes. We would like to point out that, for security reasons, the factory set administrator code must be changed to an individually set code.

• Switch on the lock using the key.
  Then press Foc.
  The "Mannen" appears.
  +ConfirmWith%
• You can use the keys 1 or 2 to scroll until the administrator/user is displayed and you wish to change the code for.
  Confirm with
• Enter the old or factory code that was previously valid using the keyboard and press.
• Enter the new code using the keypad and confirm with:
  Repeat your entry and confirm it again with
  Code change complete! is displayed after a correct entry.
  Press any key.

Note: When a safe lock is first started up, additional information on the current date and time are requested:

Enter the day (2 digits)
Enter the month (2 digits)
Enter the year (2 digits)
Enter the hour (2 digits)
Enter the minutes (2 digits)

Language menu

• Switch on the lock using the key.
  Then press Func.
  The 'Attn menu' appears.
• Scroll with the 1 or 2 key until the "Language" menu item is highlighted.
• Confirm with
• "yaw menu / yawve" appears.
• Use keys 1 or 2 to scroll until the desired
  language is mark
  ·Confirm with
• "Data has been saved!" appears in the display.
• Press any key.

MAIN MENU

Code change
Language/Sprache
Administraor ...
info No comfication
[172] Combination of 2 codes
1
FP]Combination with one fin
If you have not selected a combination,
LANGUAGE confirm 3x with
Cotina if you have selected the combination "TP",
Deutsch you will create your fingerprint as described in the sub-menu "Administrative/User/Create/
Español Create fingerprint".

Sub-menue Administrator / User / Create /

Create fingerprint

• Switch on the lock using the key.
• Then press F#
  The "How many" appears.
  -Scroll with the 1 or 2 key until the "Administered"
  mou m is highestd
• Confirm with
• kana mela. AemnolmAppears.
• Main menu / Administration / User appears.
• Confirm with
• "Man menu/Administrator/User/Create finger"appears
• Scroll with the 1 or 2 key until the "Create"
  fingerprint* menu item is highlighted.
• Confirm with
  -Enter the administrator code to acquire the
• Enter the administration code to activate the
  aannnnnne aen annnne ennnnne
• "Magnetism Anger" appears.
• Move the finger from the top to bottom
  centrally and a number of times over the sensor.
  The display will either prompt you to repeat
  the process (for error messages, see page 15).
  or the msses "NSF/INFLP" will appear.
  The key to 3 to roll through the possible
  eey 12
  combinations.
  The following options are available:
  [-] No combination
  [CD] Combination with one code
  [F] Combination with an additional
  fingerprint
• Press any key.

#

1.股份类别：股票
569425
Komplextion:
[52]
( x - 2x) t - xy^2 = ( x - 2x) f^ t

1: FUNC:

USER.0001 CD
Created:

1 + u8 = 8

EUNIC:

10/12

USE

Create Code

Create Fing

m - 1 0 ;

1

A

Programfnges

1

F

USER.00

created

一

AD = AC = 1

<

1^3 - 1 = - 1

FUNC: <

Menu Administrator / User / Assign

Sub-menue Administrator/User/Assign/

Create code

• Switch on the lock using the key.

Then press Fuc

The "You know" appears.

+Scrollwiththe1or3keyunlthefundstr

• menu item is highlighted.

F

-Commlwith

• Main Menu/Advanced Options appears.

• Confirm with

*u#m#n/Admn#b#r/Be"appeaes.

• Scroll with the 1 or 2 key until the 'Assign'

menu item is highlighted.

+Confirm with

Hmnnn nnnnne rnrnnnne ennnnne

• Confirm with

-

Enter the administrator code to acquire the user's name.

authorisation for programming

You can use the keys 1 or 2 to scroll until

the user is marked whose code is supposed

to be assigned.

• Confirm w/

Enter the 6-digit code and confirm it with

Use key 1 or 2 to scroll through the possible

combinations

The following options are available:

[No combination]

[12] Combination of 3 codes

[1/2]Combination of 2 codes

[175] Combination of 3 codes [176] Combination of 4 codes

[FP] Combination with one fingerprint

If you have not selected a combination,

confirm 3x with

Sub-menubrator/User/Assign/Assign fingerprint

• Switch on the lock using the key.

• Then press Func.

The 'Moth menu' appears.

• Scroll with the 1 or 2 key until the menu

item"Adminsator"is highlighted

• Confirm with

• "Mav memu/Attnmator" appears.

• Confirm with

"Mac menu/Administatx/User appears.

• Scroll with the 1 or 2 key until the "Assign" button.

menu item is highlighted

Confirm with 100%

• Scroll with the 1 or 2 key until the "AspenZiger" menu item is highlighted.

F

• Enter the administrator code to acquire the authorization for personnel.

the authorisation for programing. "Munenw (Amnnter / lir / sienf) apors

• You can use the keys 1 or 2 to scroll until

the user is marked whose fingerprint is

supposed to be assigned.

• Confirm with

"Create frigjprnla appears.

• Move the finger from the top to bottom

centrally and a number of times over the sensor.

The dlsplay will either prompt you to repeat the

process (for error messages, see page 15), or the message "ERRXXX" will appear.

• Use key 1 or 2 to scroll through the possible

combinations.

The following options are available:

No combination

[CD] Combination with one code

[FP] Combination with an additional

fingerprint

• Press any key.

USER

Create

A

Delete

( x - 2x) t - xy^2 = ( x - 2x) f^ t

1:2: FUNC:

USR

Assign Code

Assign Finger

m = 311 ;

FUNC:

A

USER.0003 FP

created!

FUNC:

m : x = 1 或 3x + 4y + 1 = 0

Menu Administrator / User / Delete

Deleted users no longer have access to the safe

However, these remain in the history.

Sub-menue Administrator/User/Delete

Switch on the lock using the key.
- Then press Fins.
The Main menu appears.
- Scroll with the 1 or 2 key until the menu
item "Administer" is highlighted
- Confirm with 0+
"Maemn/Admnns appears.
- Confirm with on
"Mat menu/Admnshator/Use appears.
- Confirm with
"Man menu/Administrator/Server/Dete appears.
- Scroll with the 1 or 2 key until the menu
item "Delete" is highlighted
Confirm with
- Enter the administrator code to acquire the authorisation for programming.
You can use the keys 1 or 2 to scroll until the
user is marked whose code is supposed to
be deleted.
- Confirm with
"Data has been deleted" appears.
- Press any key.

USEER

Fornta

Create Delete

Delete

( x - 2x) t - xy^2 = ( x - 2x) f^ t

1

FUNC:

A

6

---

USER.0001 CD

1

1 + 2( 1 + u) 1 - 21 t =

1:2:FUNC:M

一

Dataset has

beendelte

m = 311

1

1

一

FUNC:

Menu Administrator / Time functions

Time and date can be set, as well as whether the

system should automatically switch between

Central European Summer/Winter Time, The delay

time prevents quick opening in the event of

a robbery.

ADMIN

Hans

User:
Ting: functions

Programmica

Proceses

1

1.2 2.4 FORC.

Menu Administrator / Time functions / Set time

• Switch on the lock using the key.
  Then press
  The Main menu appears.
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
  Confirm with
  *Mmmeu/Admiurator appears.
• Scroll with the 1 or 2 key until the menu
  item*nur function is highlighted.
  Confirm with on
• Administor /Time entry appears.
• Confirm with
• Enter the administrator code to acquire
  the authorisation for programming.
  The time (24-hour format) can be set via
  the keypad
  +Confirm with
  "Paeaaee
• Press any key.

TIMER FUN

Time spent

Date entry

Autom.ST/WT

Delay time

一

2: FUNC:

Time and sex

H.M. 10:00

一

FUNC: M

Menu Administrator / Time functions / Set date Menu Adminis

• Switch on the lock using the key.
• Then press fun.
  The "dot menu" appears.
• Scroll with the 1 or 2 key until the menu
  item Admnsator is highlighted.
  Confirm with
  "Man menu/Attnahtator appears.
• Scroll with the 1 or 2 key until the menu
  item Time functions is highlighted
• Confirm with
  The functions appear.
• Scroll with the 1 or 2 key until the "Date entry"
• use arrow to highlight text.
  mnuuie
• Confirm with the date.
• Enter the administrator code to acquire the administrator role.
  authorisation for programming.
  The date can be set via the keypad.
• Confirm with 25.
  "Deer not beewever!" appears.

Press any key.

TIMERSUN

Time entry Date entry

Autm. ST/WT

Delay time

Study time

图

-“Administrator”appears.

• Scroll with the 1 or 2 key until the menu item

FUNC:M Time functions"is highlighted.

• Confirm with

Tne functions appears.

• Scroll with the 1 or 2 key until the

• menu item "delay time" is highlighted.

• Confirm with

Enter the administrator code to acquire the

authorisation for programming. Where a delay

m.STWT time has already been set, it must first be

through
TIMER FUN 1

Date entry 1
Autom STWT
Pey tiny

Menu Administrator / Programming

A firmware update installs the latest software version. Reorganise sorts the database.

TIMERFUN

Time entry:

Date entry

Autom. ST/WT

Delay time:

Delay time

[00]min

1

---

FUNC:M ·Programming"app
- Scroll with the 1 or 2 key until the menu
item "fmswarepate" is highlighted.
- Confirm with On
Enter the administrator code to acquire the
authorisation for programming.
The message "Contact current original manufacturer
Fennwae version uong Enter appears.
+ Confirm with . Thereafter there is no
need to do anything further in the process.
The message "do not interrupt power" appears.
The message on the display disappears for
some time.
- when the update is complete, the message - if something has changed, the message
Hannnnnneeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppeeppe

Menu Administrator / Programming / Reorganise

Reorganisation must be carried out cyclically in
order to optimise the user database and restructure
the user data records.
- Switch on the lock using the key.
The press
The "Koinmew" appears.
Scroll with the 1 or 2 key until the menu
item "Administer" is highlighted.
·Confirm with
- "Administrative" appror
- Scroll with the 1 or 2 key until the
"Programming" menu Item is highlighted.
+ Confirm with
- "Programming" appears.
Scroll with the 1 or 2 key until the menu
item "Restructuring" is highlighted.
- Confirm with
- Enter the administrator code to acquire
the authorisation for programming.
Restructuring progress* appears.

PROGRAMMING

Database update

Firwssucdte

Restructure

Confirm current

original firmware

version with Enter

x1,x2,·s ,x_n

Firmwareupdate

regulstrl

1

F

Cabiase upcateFirewareupcata

Restructure

Basturine

Receiving in progress!

---

Menu Administrator / Processes

It is possible to store the history on an inserted microSD card or to output it directly on the display.

Menu Administrator / Setup

The system must be registered for communication within the device. FP-reset removes all fingerprints.

Menu Administrator / Processes / Displays

Switch on the lock using the key.
The press
The Moin menu appears.
- Scroll with the 1 or 2 key until the menu
item "Administer" is highlighted.
- Confirm with
- Administator appears.
- Scroll with the 1 or 2 key until the menu
item"Processes" is highlighted.
Confirm with 20
- Enter the administrator code to acquire
the authorisation for programming.
- Scroll with the 1 or 2 key through the
data records
- Confirm with

Menu Administrator / Setup / Install

In the event of a complete system failure, the electronic control panel may have to be registered again with the locking mechanism.

Menu Administrator / Processes / Save

• Please insert a FAT-32 formatted microSD card into the microSD card slot.
• Switch on the lock using the key.
  The press
  The Main menu appears.
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
• Confirm with
• "Administer" appears.
• Scroll with the 1 or 2 key until the menu
  Item Processes is highlighted.
• Confirm with .
  "Pecesie appears.
• Scroll with the 1 or 2 key until the menu
  Item "Say" is highlighted.
• Confirm with -
• Enter the administrator code to acquire
  the authorisation for programming.
  "Please wait" appears.
• "Dataset has been stored!" appears.
• Press any key.

After registering, the administrator code must be changed as described in the Code Change menu.

Menu Administrator / Setup / FP-reset

• Switch on the lock using the key.
  The press
  The "Mam menu" appears
• Scroll with the 1 or 2 key until the menu
  item "Administer" is highlighted.
• Confirm with
• "Administrator" appears.
• Scroll with the 1 or 2 key until the menu
  item *Set
• Confirm with
• Scroll with the 1 or 2 key until the menu
  item FP Reset is highlighted.
• Confirm with
• Enter the administrator code to acquire
  the authorisation for progra
  "Delete data with ENINKEY" appears
• Confirm with 0
  "Please wail appears.
• Press any key.

Menu Administrator / Setup /Generate AES key

This function is not enabled at present.

In this menu, you can have several pieces of information of the system displayed.

Menu info / System Info

• Switch on the lock using the key.
  The press
  The "Kaimen" appears.
• Scroll with the 1 or 2 key until the menu
  item*in is highlighted.
  Confirm with 06
  *n# appears
• Confirm with 0
  Enter the administrator code to acquire
  the authorisation for programming.
  The system information is displayed.
• Scroll with key 1 or 2 to view the information.
  Use the key to return.

Info/system check menu

Switch on the lock using the key.
The press
The "Manneur" appears.
- Scroll with the 1 or 2 key until the menu item
info is highlighted
Confirm with
*ina appears
- Scroll with the 1 or 2 key until the menu item
Systemdeck is highlighted.
- Confirm with
- Enter the administrator code to acquire the
authorisation for programming.
The system check Information is displayed.
+ Scroll with key 1 or 2 to view the information.
Use the time key to return.

Error messages

The illustration below describes the error messages on the display when a fingerprint is created or when the safe is opened.

Error message Solution
Too fast! Please repeat	Move your finger slowly across the sensor.
Too tilted! Please repeat	Move your finger flat across the sensor.
Too short! Please repeat	Move your finger across the sensor so that more area of your fingerprint can be read.
Position in the middle and repeat!	Position your finger in the middle of the sensor.
Wrong code! Enter a valid code.
No admittance! An unsaved fingerprint has been used. Repeat with a fingerprint that has already been created.

Technical details

Number of administrator codes:	1
Number of user codes: 9 (max.)
Number of fingerprint codes:	20 (max.)
Blocking times: After an Internet attack, the correct code/FP is entered 15x, 5 minutes
Power supply: 4x AA MIGNON LR6 ALKALINE
Date/time:	✓
Updatable (firmware):	✓
History number: 2,000

Battery replacement

You can see the battery status at any time using the battery level indicator at the top right of the display. If the battery capacity is running low, a corresponding message appears on the display. When this notice appears, change the batteries as soon as possible.

Remove the screw on the underside of the lock electronics. This will require a Tox T8 screwdriver. This is included in the scope of delivery.

Let the cover slide out together with the batteries.

Remove the old batteries and dispose of them according to the disposal instructions on page 15. Replace the batteries with four new 1.5V AA Mignon batteries and according to the correct polarity. For this purpose, illustrations are shown on the battery holder. Please use branded batteries and no rechargeable batteries.

Push the cover and batteries back into the locking electronics and screw them tight.

Warranty

BURG-WACHTER products comply with the technical standards at the time of production and adhere to our own quality standards. The guarantee only covers defects which can be proved to have resulted from production or material defects at the time of purchase. The warranty ends after two years, further claims are excluded. Defects and damage caused by e.g. transport, Incorrect operation, Improper use, wear etc. are excluded from the warranty. The batteries are not included in the guarantee. A short description of any defects identified must be made in writing and the device returned to the place it was purchased, together with the original packaging. After the device has been tested, and within a appropriate period of time, the guarantor will decide whether or not to repair or exchange the item.

Attention:

In order to deliver a flawless and high quality product to you and to better assist you in case of service or repair, it is necessary that faulty or defective devices along with the valid administrator code be presented to your dealer together with the original documentation.

For returns, all undamaged device parts must furthermore be in the factory setting due to your right of revocation. Failure to comply with this will invalidate the warranty.

Disposal of the device

Dear customer,

please help us avoid unnecessary waste. Should you intend to dispose of this device at any time, please remember that many components of this device contain valuable materials that can be recycled.

Please be aware that electrical and electronic equipment and batteries marked in this way must not be disposed of with house hold waste but collected separately. Please obtain information on the collecting points for electrical waste from the responsible authority of your city/municipality.

BURG-WACHTER KG hereby declares that this device complies with the Directives 2014/30/EU, (EMC) and 2011/65/EU (RoHS).

The complete text of the EU Declaration of Conformity is available at the following Internet address: www.burg.biz

Safety recommendation

Please clean the keyboard operating surface periodically with a microfibre cloth (e.g. glasses cleaning cloth for spectacles) to remove any fingerprints on the keyboard surface.

Printing and typesetting errors as well as technical changes reserved.

Mode d'emploi

Montage

A Ecran

MAIN MENU

Code change

Language/Sprache

Administration...

info

LANGUAGE
Cölling Deutsch
English Spanisch

Menu administrateur

USER

Create

Assign

Delete

2: FUNC:

USER.0001 CD

Combination: [F'P]

FUNC: M

USER.0002 CD 569425 Combination: [FR]

1:▲ FUNC: <

FUNC: <

USER Create Code Create Finger

1: FUNC <

#

Program finger

#

FUNC <

USERXXXXPcrested!

FUNC:←

m = 311

trateur) apparait.

---

Validez avcc

User
Timer Functions
Programming
Processes

1: 2: FUNC:

User Restructure Processes Install

1:

FUNC:

[1] Green combination

[1]Combination 7.6.8

1

Time entry Date entry

Autorn ST/WT

Delay time

M

1:2: FUNC:

Date

D.MY

00.00

Bevestig met

The entry Data expers

Autom ST/WT

Delay Time

1: FUNC:

Delay time

[00]min

Menu Administrator / Programming / Firmware-update