WN54G240IT - Washing machine SIEMENS - Free user manual and instructions

USER MANUAL WN54G240IT SIEMENS

These repair hints support consumer to repair appliances by himself according to the applicable eco-design regulation (as of 03/2021). They contain information how to exchange defined spare parts including warnings and risks. In case of questions, please contact our customer service. We will only be liable for damages if the repair hints have been followed properly.

1.2 Explanation of symbols

The warning levels consist of a symbol and a signal word. The signal word indicates the severity of the danger. Warning level Meaning Danger Non-observance of the warning message will result in death or serious injuries. Warning Non-observance of the warning message could result in death or serious injuries. Caution Non-observance of the warning message could result in minor injuries. Notice Non-observance of the warning message could result in damage to property. Table1: Danger levels

1.2.2 Hazard symbols

Hazard symbols are symbolic representations which give an indication of the kind of danger. The following hazard symbols are used in this document: Hazard symbol Meaning General warning message Danger from electrical voltage Risk of explosion Danger of cuts Danger of crushing Concerning this document 2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page58of265Hazard symbol Meaning Danger from hot surfaces Danger from strong magnetic field Danger from non-ionizing radiation Table2: Hazard symbols

1.2.3 Structure of the warnings

Warnings in this document have a standardised appearance and a standardised struc- ture. Danger Type and source of danger! Possible consequences of ignoring the danger / warning.

Measures and prohibitions for preventing the danger. The following example shows a warning that warns against electric shock due to live parts. The measure for avoiding the danger is mentioned. Danger Risk of electric shock due to live parts! Death by electrocution

Disconnect appliances from electrical supply at least 60 seconds before starting repairs.

1.2.4 General symbols

The following general symbols are used in this document: Gen. symbol Meaning Identification of a special tip (text and/or graphic) Identification of a simple tip (only text) Identification of a link to a video tutorial Gen. symbol Meaning Identification of required tools Identification of required preconditions Identification of a condition (if ..., then ...) Identification of a result Start Identification of a key or button [00123456] Identification of a material number Status Identification of displayed text / window (in the appliance's display) Table3: General symbols Concerning this document 2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page59of265Safety

2.1 General Safety instructions

2.1.1 All domestic appliances

Risk of electric shock due to live parts! ¡ Errors by repairs involving electrical components can lead to electrical shock! ¡ Disconnect the appliance from the mains for at least 60 seconds before starting work. ¡ After the repair have a safety test according VDE 0701 or country-specific regula- tions performed. Risk of injury from sharp edges! ¡ Wear protective gloves. Risk of crushing during repair, maintenance, troubleshooting and service due to heavy and moving components ¡ Wear protective shoes. ¡ Secure heavy components from falling down. ¡ Do not stick body parts into moving components. Risk to the appliance's safety / function! ¡ Only use original spare parts. Risk of damage to electrostatically sensitive components (ESDs)! ¡ Do not touch the modules, including connections and conductor paths. Safety 2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page60of265Tools and aids Designation Details Images Auxiliary tool [15000155] Tool for loosening out of plastic parts Screwdriver Torx T20 with bore hole [00340764] 100mm, for screws with safety pin Torque spanner [15000441] Torque spanner 20 - 100 Nm Slot screwdriver [00340854] Blade 3.5mm x 0.6mm x 100mm, Protective Insulation 1000V AC Slot screwdriver [00340855] Blade 5.5mm x 1.0mm x 125mm, Protective Insulation 1000V AC Needle-nose pliers, angled pattern [00341269] Length 200 mm Side-cutting pliers [00342182] Length: 200mm Designation Details Images Combination wrench [00340811] Wrench size 10ºmm, M6 Combination wrench [00340814] Wrench size 13ºmm, M8 Combination wrench [00340817] Wrench size 17mm, M10 Combination wrench [15000459] Wrench size 16ºmm, M10 Tools and aids 2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page61of265Repair

4.1 Replacing base cover

Prerequisite: Appliance is disconnected from power supply. Appliance is disconnected from water supply.

4.1.1 Removing base cover

1. Remove drain hose.

2. Remove drain cover.

3. Remove base cover.

7. Remove base cover.

4.1.2 Installing base cover

Install in reverse order. Repair 2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page62of2654.2 Replacing front panel Prerequisite: Appliance is disconnected from power supply. Appliance is disconnected from water supply. Detergent drawer has been removed. Fascia panel has been removed. Door has been removed. Door seal has been removed. Base cover has been removed.→Page 62

4.2.1 Removing front panel

Caution Sharp housing edges! Cut injuries

Caution Risk of falling parts due to released screws! Injury because of falling parts.

Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bottom.

Secure component from falling down. Remove screws from in following order (1-2-3-4).

2. Remove front panel.

Install in reverse order. Repair 2021-02-19_8001214500 Copyright by BSH Hausgeräte GmbH Page63of2654.3 Replacing door Prerequisite: Appliance is disconnected from power supply. Appliance is disconnected from water supply.

1. Remove two screws (1).

2. Release catch elements with slotted screwdriver (2).

Wear protective gloves. Caution Risk of falling parts due to released screws! Injury because of falling parts.

Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bot- tom.

Secure component from falling down. Prerequisite: Appliance is disconnected from power supply. Appliance is disconnected from water supply. Detergent drawer has been removed. Door has been removed. Base cover removed.→Page 62

Caution Risk of falling parts due to released screws! Injury because of falling parts.

Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bottom.

Secure component from falling down. Remove screws from in following order (1-2-3-4).

2. Release screws at back of appliance.

4. Release catch elements of fascia panel at top and on right side.

5. Remove fascia panel.

6. Remove drum light holder at top.

7. Release screws of dispenser housing.

Notice Risk of damaged surface! Surface of appliance can be scratched by using wrong tools.

Only use plastic tools to replace the tension ring. Remove tension ring from gasket with a plastic tool.

9. Release door seal from front panel.

10. Release cable connector from door lock.

11. Remove front panel.

Do not reach into the hinge area.

Wear protective gloves. Prerequisite: Appliance is disconnected from power supply. Appliance is disconnected from water supply. Detergent drawer has been removed. Door has been removed. Door seal has been removed. Base cover removed.→Page 62 Front panel has been removed.

4.5.1 Removing door hinge

1. Remove two screws.