DO9182KR - Food Processor DOMO - Free user manual and instructions

Features	Details
Product type	Food processor
Power	800 W
Bowl capacity	4.5 liters
Speed	Variable, 6 levels
Included accessories	Whisk, dough hook, blender
Functions	Mixing, kneading, whipping
Bowl material	Stainless steel
Dimensions	35 x 22 x 30 cm
Weight	3.5 kg
Safety	Overheat protection system
Maintenance	Bowl and accessories dishwasher safe
Warranty	2 years

Frequently Asked Questions - DO9182KR DOMO

How do I assemble the DOMO DO9182KR?

To assemble the DOMO DO9182KR, start by attaching the bowl to the main base by turning it clockwise until it is securely in place. Then place the lid on the bowl, ensuring it clicks into place properly.

Why won\u0027t my food processor start?

First, check that the device is properly plugged in. Also, make sure the bowl and lid are securely attached, as the processor won\u0027t start if these parts are not in place.

How do I clean the DOMO DO9182KR?

To clean the DOMO DO9182KR, unplug the device and disassemble the removable parts. Wash them with warm soapy water and wipe the main base with a damp cloth. Never immerse the base in water.

The processor makes a lot of noise, is this normal?

A certain level of noise is normal when using the DOMO DO9182KR. However, if the noise is excessive or unusual, check that all components are properly installed and that no objects are blocking the blades.

How do I adjust the speed of the processor?

The DOMO DO9182KR is equipped with several speed settings. Use the speed control button on the control panel to select the desired speed according to the recipe you are preparing.

What should I do if the motor overheats?

If the motor overheats, immediately turn off the device and unplug it. Let it cool down for about 30 minutes before using it again. Make sure not to overload the processor during use.

Where can I find replacement parts?

Replacement parts for the DOMO DO9182KR can be ordered from DOMO customer service or from stores specializing in household appliances. Make sure to check the compatibility of the parts.

The processor isn\u0027t mixing properly, what should I do?

If the processor isn\u0027t mixing properly, check that the ingredients are not too dense or in too large a quantity. Try reducing the amount or cutting the ingredients into smaller pieces before adding them to the bowl.

USER MANUAL DO9182KR DOMO

Modern kitchen mixer with black and silver casing, no visible text or symbols on the device itself

DO9182KR

Handleiding Keukenrobot

Mode d'emploi Robot de cuisine

Gebrauchsanleitung Küchenmaschine

Instruction booklet Stand mixer

Manual de instrucciones Robot de cocina

Návod k použití Kuchyňský robot – sada

Návod na použitie Kuchynský robot - sada

Two black-and-white icons: a triangular warning triangle with an exclamation mark and an open book (no text or symbols)

Clear plastic blender with black handle and lid, no visible text or symbols

⑨

Close-up of a stainless steel robotic feedstock with multiple kitchen utensils and plastic components (no text or symbols visible)

10

Three types of kitchen utensils: a mesh fan, a curved handle, and a wire-wrapped head (no text or symbols visible)

Three metallic cylindrical containers with perforated bases, one open and one filled with a tool, labeled with number 14 (no text or symbols on containers)

Close-up of a metallic cylindrical object with a circular mark on its surface, mounted on a black base (no visible text or symbols)

Close-up of a mechanical component with a black cylindrical body and metallic fittings (no visible text or symbols)

Close-up of a mechanical component with a metallic shaft and bolt, no visible text or symbols

Close-up of a blue cylindrical mechanical component with a circular label marked '1' (no visible text or symbols on the object itself)

Close-up of a black cylindrical device with a circular white top and central lens, labeled with number 2 (no visible text or symbols on the device itself)

Close-up of a metallic mechanical component with a textured central hole and a numbered label (3) in the corner (no readable text or symbols)

Exploded view of a mechanical component showing internal parts and a cross-shaped part (no text or symbols visible)

Two circular perforated metal components labeled 5 and 6, with no visible text or symbols on the surfaces.

Close-up of a metallic mechanical ring component with a circular badge and number 7 in the corner (no text or symbols on the ring itself)

Close-up of a kitchen electric shaver with metal components and a bowl of dough (no visible text or symbols)

Black plastic mechanical component with a circular top and handle, labeled with number 9 (no text or symbols on the object itself)

Close-up of metallic mechanical components including a knuckle, threaded shaft, and conical tip (no text or symbols visible)

Collection of mechanical parts including a T-shaped tool, threaded screw, plastic housing, and circular components (no text or symbols visible)

Close-up of a blue industrial sensor or sensor component with a circular label (1) in the top-left corner, no visible text or symbols on the device itself.

Close-up of a black cylindrical device with a circular lens and central hub (no visible text or symbols)

Close-up of a black and blue mechanical device mounted on a metallic base (no visible text or symbols)

Close-up of a black mechanical component with a circular metallic part, no visible text or symbols

Close-up of a mechanical component with a metallic circular aperture and internal structure (no visible text or symbols)

Three metallic cylindrical containers with perforated lids, arranged horizontally (no text or symbols visible)

Close-up of a black medical or laboratory device with a circular component and labeled part (7), no readable text or symbols beyond the number.

DEMONTEREN

Prohibition sign with crossed-out trash bin and black rectangular symbol below

Recycling symbol icon with three chasing arrows forming a triangle (no text or labels)

Three types of kitchen utensils: a mesh fan, a curved handle, and a wire-wrapped head (no text or symbols visible)

Product photo of a kitchen blender with labeled parts (⑨ and ⑩), no visible text or symbols on the main objects.

Three metallic cylindrical containers with textured surfaces next to a black industrial pipe fitting (no text or symbols visible)

AVANT LA PREMIÈRE UTILISATION

Close-up of a metallic cylindrical object with a circular base and a small circular mark, mounted on a black base (no text or symbols visible)

Close-up of a mechanical component with a black cylindrical body and metallic fittings (no visible text or symbols)

Close-up of a mechanical component with a metallic shaft and mounting bracket (no visible text or symbols)

Close-up of a blue cylindrical device with a circular label marked '1' on the top (no visible text or symbols on the device itself)

Close-up of a black cylindrical device with a circular white component, labeled with number 2 (no visible text or symbols on the device itself)

Close-up of a mechanical component with a metallic shaft and internal bore, labeled with number 3 (no text or symbols on the object itself)

Exploded view of a mechanical component showing internal gears and a cross-shaped part (no text or symbols visible)

Two circular metal components with perforated surfaces, labeled 5 and 6, showing different hole positions (no text or symbols beyond labels)

Metallic circular object with a wavy edge, no visible text or symbols

Close-up of a modern kitchen stand mixer with metal bowl and handle (no visible text or symbols)

Black plastic mechanical component with a circular top and cylindrical shaft, labeled with number 9 (no text or symbols on the object itself)

Close-up of metallic mechanical components including a threaded shaft, threaded screw, and a conical tip (no text or symbols visible)

Collection of industrial cutting tools including a T-shaped tool, helical screw, plastic components, and a meshing gear (no text or symbols visible)

Close-up of a black cylindrical device with a circular lens and adjustment knobs, labeled with number 12 (no text or symbols on the device itself)

Close-up of a blue industrial sensor or sensor component with no visible text or symbols

Close-up of a black cylindrical device with a circular lens and adjustment knobs, labeled with number 2 (no text or symbols on the device itself)

Close-up of a robotic arm with blue and black components, mounted on a metallic base (no visible text or symbols)

Close-up of a black industrial lampshade with a circular dial and metallic rim (no visible text or symbols)

Close-up of a black mechanical component with a metallic circular aperture and internal perforations (no visible text or symbols)

Three metallic cylindrical containers with perforated lids, arranged horizontally (no text or symbols visible)

Close-up of a black cylindrical device with a circular aperture and labeled component (7), no visible text or symbols beyond the number.

DÉMONTAGE

Warning symbol for a trash bin with crossed lines indicating no waste or discharge, and a black rectangular block below.

Recycling symbol icon with three chasing arrows inside a rounded square (no text or labels)

Clear plastic blender with black handle and lid, no visible text or symbols

⑨

Product photo of a stainless steel robotic feedstock with multiple kitchen utensils and accessories (no text or symbols visible)

10

11

12

13

Three metallic kitchen waste bins with a black T-shaped tool in the background (no text or symbols visible)

14

Close-up of a metallic cylindrical object with a circular mark on its surface, mounted on a black base (no visible text or symbols)

Close-up of a mechanical component with a black cylindrical shaft and metallic connector (no visible text or symbols)

Close-up of a mechanical component with a metallic shaft and bolt, no visible text or symbols

Close-up of a blue industrial component with a circular label containing the number 1 (no visible text or symbols on the component itself)

Close-up of a black cylindrical device with a circular lens and adjustment knobs, labeled with number 2 (no text or symbols on the device itself)

Close-up of a mechanical component with a metallic shaft and central bore, labeled with number 3 (no text or symbols on the main subject)

Exploded view of a mechanical component showing internal gears and a cross-section (no text or symbols)

Two circular metal components with perforated surfaces, labeled 5 and 6, showing different hole positions (no text or symbols beyond labels)

Metallic circular object with serrated edges, no visible text or symbols

Modern kitchen stand mixer with stainless steel bowl and metal handle (no visible text or symbols)

Black plastic mechanical component with a circular top and a small protrusion, labeled with number 9 (no text or symbols on the object itself)

Close-up of metallic mechanical components including a conical tool, threaded shaft, and flange (no text or symbols visible)

Exploded view of a mechanical component showing a T-shaped tool, threaded screw, plastic housing, and circular components (no text or symbols visible)

Close-up of a black cylindrical device with a circular aperture and labeled component (12), no visible text or symbols on the device itself.

Close-up of a blue industrial component with a circular label (1) in the top-left corner, no visible text or symbols on the body.

Close-up of a black cylindrical device with a circular lens and metallic components (no visible text or symbols)

Close-up of a black and blue mechanical device with a metallic base (no visible text or symbols)

Close-up of a black industrial lampshade with a circular lens and metallic frame (no visible text or symbols)

Close-up of a black industrial lampshade with reflective surface and circular lens (no text or symbols visible)

Three metallic cylindrical containers with perforated lids, arranged horizontally (no text or symbols visible)

Close-up of a black cylindrical device with a circular lens and labeled component (7), no visible text or symbols beyond the number.

AUSEINANDERNEHMEN

Prohibition sign depicting a trash bin crossed with diagonal lines, indicating no waste or discharge.

Recycling symbol icon with three chasing arrows forming a triangle (no text or labels)

All of our products are always submitted to a strict quality control before they are sold to you. Should you nevertheless experience problems with your device, we sincerely regret this.

In that case, we kindly request you to contact our customer service.

Our staff will gladly assist you.

[phone]

[e-mail]

Monday – Thursday: 8.30 – 12.00 and 13.00 – 17.00

Friday: 8.30 - 12.00 and 13.00 - 16.30

This appliance has a two year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions or repairs executed by a third party. The guarantee is issued with the original till receipt. All parts, which are subject to wear, are excluded from the warranty.

If your device breaks down within the 2-year warranty period, you can return the device together with your receipt to the shop where you purchased it.

The guarantee on accessories and components that are liable to wear-and-tear is only 6 months.

The guarantee and responsibility of the supplier and manufacturer lapse automatically in the following cases:

· If the instructions in this manual have not been followed.
· In case of incorrect connection, e.g. electrical voltage that is too high.
· In case of incorrect, rough or abnormal use.
· In case of insufficient or incorrect maintenance.
- In case of repairs or alterations to the device by the consumer or non-authorised third parties.
- If the customer used parts or accessories that are not recommended or provided by the supplier / manufacturer.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

Read all instructions carefully. Keep this manual for future reference.

• Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time.
  · Make sure children cannot play with the packaging material.
  · This appliance is intended to be used in household and similar applications such as:

• staff kitchen areas in shops, offices and other working environments;
  · farm houses;
  · by clients in hotels, motels and other residential type environments;

• bed and breakfast type environments.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

· Children should be supervised to ensure that they do not play with the appliance.
- This appliance can be used by children aged from 16 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
- Keep the appliance and its cord out of reach of children younger than 16 years.
- The appliance must be disconnected from its power source when not in use, during service and when replacing parts. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• CAUTION: in order to avoid a hazard this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Never leave the appliance unattended while it is functioning.
• Do not use or store this appliance outdoors.
• Do not use this appliance for other than intended use.
• Check carefully that the voltage and frequency of the power net match the indications on the rating label of the appliance.
• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local standards and requirements.

• Only use the utensils delivered with the appliance.

• Do not operate this appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any manner. Return the appliance to the DOMO Service Department or its service agent for examination, repair, or electrical or mechanical adjustment. Do not try to repair the appliance yourself.

• To protect against electrical shock or burns, do not immerse unit, cord, or plug in water or other liquid.
  · Do not operate the appliance with wet hands.
  · A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. DO NOT USE WITH AN EXTENSION CORD.
• Unwrap the cord completely to prevent overheating of the cord.
  · Do not let the power supply cord hang over the edge of a counter, or touch hot surfaces.
  · Do not allow the power cord supply to run underneath or around the unit.
• Make sure the appliance is correctly assembled, then plug the cord in the wall outlet. To disconnect, turn controls to "OFF" or "o" position, then remove the plug from the wall. Never pull the cord or appliance to remove the plug from the socket.
• Do not use the appliance if there is any water in it or the parts are still wet after cleaning.
  · Do not use the appliance without ingredients.
• Handle with great care when using sharp accessories like knives. Only touch the accessories when they stopped moving inside the appliance.
• Failure to maintain this appliance in a clean condition could adversely affect the life of the appliance and possibly result in a hazardous situation.
  · Any injury or damage caused by failure to comply with these rules are at your own risk. Neither the manufacturer, importer, or the supplier may be held liable.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

PARTS

1. Speed control
2. Release button multifunctional head
3. Stainless steel mixing bowl
4. Bowl lid
5. Fill opening
6. Connection point for vegetable slicer and meat grinder
7. Multifunctional head
8. Connection point for blender
9. Blender
10. Meat grinder
11. Beater
12. Dough hook
13. Balloon whisk
14. Vegetable slicer

DOMO 1 2 3 4 5 6 7 8

Close-up of a modern kitchen blender with black handle and lid (no text or symbols visible)

⑨

Close-up of a stainless steel kitchen feedstock with various kitchen utensils and components (no text or symbols visible)

10

11

12

13

Black pipe fitting with three metallic cylindrical containers, no visible text or symbols

14

BEFORE THE FIRST USE

• Remove the appliance and the accessories from the packaging. Remove any promotional stickers.
• Wash all removable parts in warm soapy water and dry thoroughly.
  · Never immerse the motor unit in water to avoid electrocution.

ASSEMBLY & USE

KNEADING/BEATING/WHISKING

1. Depending on the nature of the ingredients, the mixing bowl with lid can make 2 kg of dough.
2. Place the appliance on a flat, clean and dry surface.
3. Make sure that the plug is removed from the socket and that the speed control is set to 'o'.
4. Turn the release button a quarter turn to the left, push the head up entirely and turn the release button to the right again, so that it points upwards, to lock the head.
5. Put the mixing bowl in the base and turn it clockwise so it locks. Put the ingredients into the bowl.
6. Choose the accessory you want to use: beater, dough hook, balloon whisk.

a. Attach the accessory to the head by sliding it around the axis.

b. Turn the accessory a quarter turn counterclockwise.

c. Release the accessory so that it falls into the lock position. Caution: only use the dough hook up to a maximum of speed 1.

Close-up of a metallic cylindrical object with a circular mark on its surface, mounted on a black base (no visible text or symbols)

Close-up of a mechanical component with a cylindrical shaft and flange (no visible text or symbols)

Close-up of a mechanical component with a metallic cylindrical body and a small protrusion, no visible text or symbols.

1. Turn the release button a quarter turn to the left, push the head down entirely and turn the release button a quarter turn to the right again so that it point upwards, to lock the head.
2. Place the lid onto the bowl. Slide the opening on the lid.
3. Put the plug into the socket and select the desired speed by turning the speed control knob.
4. During the preparation you can add ingredients through the fill opening in the lid. Caution: Do not use the appliance for longer than 10 minutes at a time. After 10 minutes of use, let the appliance cool down for 30 minutes before using it again.
5. To stop the appliance, turn the speed control knob to the 'o' position.

MEAT GRINDER

Turn off the device, and take the plug out of the socket before you add, remove or clean any accessories.

1. Open the lid at the tip of the multifunctional head of the food processor: tilt the lid slightly upwards and remove the lid.
2. The connecting point for accessories is now shown.
3. Place the meat grinder at an angle of 25^ to the connection point and tighten it by making a quarter turn clockwise. You hear a click when it is securely fastened. Your meat grinder is now in a perfect vertical position.

Close-up of a blue cylindrical electronic device with a circular label marked '1' (no visible text or symbols on the device itself)

Close-up of a black cylindrical device with a circular lens and central button, labeled with number 2 (no visible text or symbols on the device itself)

Close-up of a mechanical component with a metallic shaft and central bore, labeled with number 3 (no text or symbols on the main subject)

1. For grinding meat insert in succession: the worm wheel and the cutting knife.

Exploded view of a mechanical component showing internal parts and a cross-shaped part (no text or symbols visible)

1. Then make a selection from the grinding discs: fine or coarse.
2. Position the notch on the disc at the height of the projecting catch.
3. Connect it altogether with the screw ring.

Two circular metal perforated samples labeled 5 and 6, with no text or symbols on the samples themselves.

Metallic circular component with serrated edges, no visible text or symbols

1. Position the bowl in the best way possible so as to put your meat in it.
2. You can use the pushing rod to press the meat firmly inside.

Modern kitchen stand mixer with stainless steel bowl and metal handle (no visible text or symbols)

Black plastic mechanical component with a circular top and handle, labeled with number 9 (no text or symbols on the object itself)

1. For sausage making, insert the following components:

10

Close-up of metallic mechanical components including a conical tool, threaded shaft, and flange (no text or symbols visible)

1. For making stuffed meatballs, insert the following components:

Exploded view of a mechanical component including a T-shaped tool, threaded screw, plastic housing, and circular components (no text or symbols visible)

1. To remove the meat grinder, press the release button next to the connection point for meat grinder. Make a quarter turn clockwise on the meat grinder. Clean all parts thoroughly and dry carefully before using them again.

12

Close-up of a black cylindrical device with a circular lens and metallic components (no visible text or symbols)

Cleaning: Do not use the dishwasher for cleaning the meat grinder.

BLENDER

1. Depending on the nature of the ingredients, the blender is capable of mixing 1.5 litres.
2. Put the multifunctional head in a horizontal position and remove the lid at the top of the head by turning it clockwise.
3. Add the ingredients to the work bowl and close the work bowl with the lid, including the measuring cup in the feed tube.
4. Place the blender on the connection point and lock the blender by turning it counterclockwise.
5. Use the speed regulator to blend.
6. During blending, it is possible to remove the measuring cup from the lid and add ingredients through the feed tube. Then always close the opening again with the measuring cup.

Note:

· Never run the blender empty.
· Never fill the work bowl with boiling fluids; always allow them to cool to room temperature.
· If you want to crush ice, do not use more than 9 ice cubes (4x4x2 cm) at a time.

VEGETABLE SLICER

Turn off the machine and pull the plug from the outlet before mounting, removing or cleaning any accessories.

1. Open the lid at the tip of the multifunctional head of the food processor: tilt the lid slightly upwards and remove the lid.

2. The connection point for accessories is revealed.

3. Place the vegetable slicer on the connection point at an angle of 25^ and turn it counterclockwise a quarter turn. You will hear a click when it is attached. The vegetable slicer is now perfectly vertical.

Close-up of a blue industrial sensor or device component with a circular label (1) in the top-left corner, no visible text or symbols on the device itself.

Close-up of a black cylindrical device with a circular lens and mounting holes (no visible text or symbols)

Close-up of a black and blue mechanical device with a metallic base (no visible text or symbols)

1. Press the grater into the opening of the vegetable slicer. You may select from a cutter and 2 different graters.

Close-up of a black mechanical component with a circular metallic part, no visible text or symbols

Close-up of a black industrial chimney with metallic glass and ventilation grille (no visible text or symbols)

Three metallic cylindrical containers with perforated lids, arranged horizontally (no text or symbols visible)

1. Operate the vegetable slicer with the food processor's speed regulator.

2. Vegetables can be pushed into the vegetable slicer safely by using the pusher.

3. To remove the vegetable slicer: Press the unlock button (see diagram) and turn the vegetable slicer clockwise a quarter turn.

4. Remove the vegetable slicer and replace the lid onto the connection.

5. Clean and dry all parts thoroughly prior to using them again.

Close-up of a black industrial sensor or optical device with a circular aperture and labeled component (7), no visible text or symbols beyond the number.

DISASSEMBLY

1. Remove the plug from the socket.

2. Remove the lid from the mixing bowl.

3. Turn the release button a quarter turn to the left, push the head up entirely and turn the release button to the right again, so that it points upwards, to lock the head.

4. Push the accessory out of the locked position and turn it clockwise a quarter turn. Then slide the accessory off of the drive shaft and remove the accessory. Use caution when removing the accessories since there may be sharp edges.

5. Turn the bowl counterclockwise out of the lock position and remove the bowl.

6. Turn the release button a quarter turn to the left, push the head down entirely and turn the release button a quarter turn to the right again so that it point upwards, to lock the head.

RECOMMENDED SPEEDS ACCESSORIES

Accessory Max usage time Speed
	3-5 mins 5-MAX
	2 mins MIN-2
	5 mins 1-MAX
	3 mins P/MAX
	5 mins 4-8
	3 mins 4-6
	5 mins 4-6
	5 mins 1-3

CLEANING AND MAINTENANCE

· Always remove the plug from the socket before cleaning the appliance.
- Never immerse the motor unit in water or under running water. Clean the motor unit with a soft, damp cloth.
- Disassemble all accessories according to the instructions under the section 'Disassembly'.
- For quick cleaning, rinse the accessories under running water.
- For thorough cleaning, wash, rinse and dry the accessories.
- To clean the blender, combine warm water with a few drops of detergent in the blender. Put the lid on the blender. Briefly turn the speed regulator to pulse and back. Repeat if needed. Rinse the blender under running water and allow it to drip-dry upside down.

ENVIRONMENTAL GUIDELINES

Warning sign with crossed lines and a trash can symbol, indicating no waste or discharge.

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Recycling symbol icon with three chasing arrows forming a triangle (no text or labels)

The packaging is recyclable. Please treat the packaging ecologically.

GARANTIA

Close-up of a modern kitchen blender with black handle and lid (no text or symbols visible)

⑨

Product photo of a stainless steel robotic feedstock with various kitchen utensils and accessories (no text or symbols visible)

10

11

12

13

Black plastic kitchen tool with three metallic gridded containers, no visible text or symbols

14

Close-up of a metallic cylindrical object with a small circular mark on its surface, mounted on a black base (no visible text or symbols)

Close-up of a black mechanical component with a metallic fitting and lever (no visible text or symbols)

Close-up of a metallic mechanical component with a small orange dot and label 'C' (no readable text or symbols)

Close-up of a blue cylindrical device with a circular label marked '1' (no visible text or symbols on the device itself)

Close-up of a black cylindrical device with a circular lens and central hub, labeled with number 2 (no visible text or symbols on the device itself)

Close-up of a mechanical component with a metallic handle and central bore (no visible text or symbols)

Exploded view of a mechanical component showing internal parts and a cross-shaped part (no text or symbols visible)

Two circular perforated metal plates labeled 5 and 6, with no text or symbols on the plates themselves.

Close-up of a metallic circular object with scalloped edges, no visible text or symbols

Modern kitchen stand mixer with metal bowl and handle (no visible text or symbols)

Black plastic mechanical component with a circular top and a small protrusion, labeled with number 9 (no text or symbols on the object itself)

Close-up of metallic mechanical components including a knitted tool, threaded screw, and conical tip (no text or symbols visible)

Collection of mechanical parts including a T-shaped tool, threaded screw, flange, and gear (no text or symbols visible)

Close-up of a black cylindrical device with a circular lens and metallic components (no visible text or symbols)

Close-up of a blue industrial sensor or sensor device with a circular indicator labeled '1' (no visible text or symbols on the device itself)

Close-up of a black cylindrical device with a circular lens and mounting holes (no visible text or symbols)

Close-up of a black and blue mechanical device mounted on a metallic base (no visible text or symbols)

Close-up of a mechanical component with a metallic circular dial and blue base (no visible text or symbols)

Close-up of a mechanical component with a circular lens and internal structure (no visible text or symbols)

Three metallic cylindrical containers with perforated lids, arranged horizontally (no text or symbols visible)

Close-up of a black cylindrical device with a circular lens and labeled component (7), no readable text or symbols beyond the number.

DESMONTAJE

Warning symbol for a trash bin with crossed and unshaded lines indicating no waste or discharge

Recycling symbol icon with three chasing arrows forming a triangle (no text or labels)

USCHOVEJTE SI TENTO MANUÁL I PRO POZDĚJŠÍ NAHLÉDNUTÍ

ČÁSTI

Close-up of a modern kitchen blender with black handle and lid (no text or symbols visible)

⑨

Close-up of a stainless steel robotic feedstock with various kitchen components (no text or symbols visible)

10

11

12

13

Three metallic kitchen waste bins with a black T-shaped tool in the background (no text or symbols visible)

14

PŘED PRVNÍM POUŽITÍM

Close-up of a metallic cylindrical object with a small circular mark on its surface, mounted on a black base (no text or symbols visible)

Close-up of a mechanical component with a black cylindrical assembly and metallic fittings (no visible text or symbols)

Close-up of a mechanical component with a metallic shaft and bolt, no visible text or symbols

Close-up of a blue industrial component with a circular label marked '1' (no visible text or symbols on the object itself)

Close-up of a black cylindrical device with a circular lens and a numbered label (2) on the top right corner.

Close-up of a stainless steel kitchen knife with a circular badge labeled '3' (no text or symbols on the knife itself)

Exploded view of a stainless steel kitchen knife showing internal components and a cross-shaped part (no text or symbols visible)

Two circular perforated metal components, labeled 5 and 6, with no visible text or symbols on the surfaces.

Metal mechanical component with a circular hole and flanged ends, no visible text or symbols

Modern kitchen stand mixer with stainless steel bowl and metal handle (no visible text or symbols)

Black plastic mechanical component with a circular top and tapered shaft, labeled with number 9 (no text or symbols on the object itself)

Close-up of metallic mechanical components including a T-junction, threaded shaft, and conical end (no text or symbols visible)

Exploded view of a mechanical component with no visible text or symbols

Close-up of a black industrial sensor or optical device with a circular aperture and metallic components (no visible text or symbols)

MIXÉR

Close-up of a blue industrial component with a circular label (1) in the top-left corner, no visible text or symbols on the body.

Close-up of a black medical or laboratory device with a circular white component, no visible text or symbols.

Close-up of a black mechanical device mounted on a metallic base, no visible text or symbols

Close-up of kitchen utensils including a brush head and four metal gridded containers (no text or symbols visible)

Close-up of a black cylindrical device with a circular lens and labeled component (7), no readable text or symbols beyond the number.

ROZEBRÁNÍ

OHLED NA ŽÍVOTNÍ PROSTŘEDÍ

Warning sign with crossed lines and a trash can symbol, indicating no waste or discharge

Recycling symbol icon with three chasing arrows forming a triangle (no text or labels)

USCHOVAJTE SI TENTO MANUÁL AJ K NEJSKORŠIEMU NAHLIADNUTI

ČASTI

Close-up of a modern kitchen blender with black handle and lid (no text or symbols visible)

⑨

Close-up of a stainless steel kitchen feedstock with various kitchen components (no text or symbols visible)

10

Three black metal wire mesh head models labeled 11, 12, and 13 (no text or symbols on the models themselves)

Black plastic kitchen tool with four metallic kitchen utensils, one labeled with number 14 (no text or symbols on main objects)

PRED PRVÝM POUŽITÍM

Close-up of a metallic cylindrical object with a small circular mark on its surface, mounted on a black base (no text or symbols visible)

Close-up of a mechanical component with a metallic fitting and cylindrical shaft (no visible text or symbols)

Close-up of a metallic mechanical component with a small yellow bolt and a black end (no visible text or symbols)

Close-up of a blue industrial component with a circular label marked '1' (no visible text or symbols on the object itself)

Close-up of a black medical or laboratory device with a circular white component, labeled with number 2 (no visible text or symbols on the device itself)

Close-up of a mechanical component with a metallic shaft and central bore, labeled with number 3 (no text or symbols on the main subject)

Exploded view of a mechanical component showing internal gears and a handle (no text or symbols visible)

Two circular metal components with perforated surfaces, labeled 5 and 6, shown side by side (no text or symbols on the objects themselves)

Metal mechanical component with a circular hole and flanged ends, no visible text or symbols.

Modern kitchen stand mixer with stainless steel bowl and metal handle (no visible text or symbols)

Close-up of a black plastic mechanical component with a circular top and tapered shaft, labeled with number 9 in the corner (no text or symbols on the object itself)

Close-up of metallic mechanical components including a knitted tool, threaded spring, and conical tip (no text or symbols visible)

Product photo of a mechanical component with various parts including a T-shaped tool, helical screw, plastic housing, and circular gear (no text or symbols visible)

Close-up of a black industrial sensor or optical device with a circular lens and central aperture (no visible text or symbols)

Close-up of a blue industrial sensor or sensor component with a circular label (1) in the top-left corner, no visible text or symbols on the device itself.

Close-up of a black industrial sensor or camera component with a circular aperture and metallic components (no visible text or symbols)

Close-up of a black and blue mechanical device with a metallic base (no visible text or symbols)

1. Vyberte si jedno z 3 strúhadiel a zatlačte ho dovnútra do krájača.

Close-up of a black medical or laboratory device with a circular aperture and labeled component (7), no visible text or symbols beyond the number.

ROZOBRATIE

Warning sign with crossed-out trash bin and a black rectangle below, indicating no waste or plastic waste.

Recycling symbol icon with three chasing arrows forming a triangle (no text or labels)

Two cylindrical white objects with small protrusions, possibly milk or similar beverage (no text or symbols visible)

Three product photos: square covers, a clear glass coffee maker, and a rectangular container with dark liquid (no text or symbols visible)

of scan hier:

ou scannez ici:

oder hier scannen:

or scan here:

QR code image containing encoded data, no visible human-readable text