BL 450 - Blender NINJA - Free user manual and instructions

USER MANUAL BL 450 NINJA

For Household Use Only

WHEN USING ELECTRICAL

APPLIANCES, BASIC SAFETY

WARNING: To reduce the risk of electric

shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in any way.

1. To protect against electrical shock, do not

submerge the appliance or allow the power cord to come into contact with water or any other liquid.

2. DO NOT allow young children to operate

the appliance or use as a toy. Close supervision is necessary when any appliance is used by or near children.

3. Never leave an appliance unattended when in

4. Remove the power cord from the electrical

outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

5. DO NOT abuse the power cord. Never carry

the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

6. DO NOT operate any appliance with a

damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.

7. DO NOT let the power cord hang over the

edge of table or counter or touch hot surfaces such as the stove.

FOODS OR HOT LIQUIDS.

21. CAUTION: DO NOT process dry

ingredients without adding liquid to the cup. This product is not intended for dry blending.

will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using again.

25. THIS PRODUCT IS INTENDED FOR

HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.

26. Appliance accessories are not intended to be

used in the microwave. Do not place the cup or the lid in the microwave as it may result in damage to the accessories.

WARNING: Extension cords

are not recommended for use with this product. SAVE THESE INSTRUCTIONS

9. Keep hands, hair, clothing, as well as utensils

out of cup while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.

10. CAUTION: Blade assembly is sharp,

handle with care. When handling the blade assembly, always hold by the base of the blade assembly.

11. Avoid contact with moving parts.

assembly is bent or damaged.

14. To reduce risk of injury, never place the blade

assembly on the base without the proper attachment.

15. DO NOT operate this appliance on or near

any hot surfaces (such as gas or electric burner or in a heated oven).

16. The use of attachments or accessories not

recommended or sold by the manufacturer may cause fire, electric shock or personal injury.

17. DO NOT remove the cup from the motor

base while the appliance is running.

18. To reduce the risk of injury, NEVER operate

the appliance without the blade assembly in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

DEVRAIENT TOUJOURS ÊTRE

English Thank you for purchasing the Nutri Ninja

NOTE: Attachments are interchangeable. Getting To Know Your Nutri Ninja

c dwww.ninjakitchen.com

• Personalized, healthy drinks and juices on the go

lids for drinks on the go

Pro is a high powered innovative tool with a compact design and outstanding performance. It is perfect for ice crushing, chopping, blending, and nutrient and vitamin extraction. Blend and go with the convenient Sip & Seal

lids, create delicious drinks to get you out the door quickly! Best results are achieved when you Pulse.12

1 Remove all packaging material and labels from the appliance. 2 Wash the lids, cups and attachments in warm, soapy water with a soft cloth. Use caution when washing the blade assemblies as the blades are very sharp. 3 Rinse and dry thoroughly. 4 Cups, lids and attachments are all dishwasher safe. It is recommended that the lids and attachments be placed on the top rack. Ensure that the attachments are removed from the cups before placing in the dishwasher. 5 Wipe the motor base clean with a damp cloth.

PLEASE KEEP THESE IMPORTANT

SAFEGUARDS IN MIND WHEN USING

THE APPLIANCE: IMPORTANT: Attachments are interchangeable. CAUTION: Blades are sharp! Use extreme caution when handling the blade assemblies. Always hold them by the base of the blade assembly. IMPORTANT: Never run the appliance empty.

CAUTION: DO NOT PROCESS HOT

FOODS OR HOT LIQUIDS. CAUTION: Never attempt to remove the cup while the appliance is still running.

WARNING: Never leave the appliance

unattended while in use.www.ninjakitchen.com

English IMPORTANT: Make sure that the motor base is plugged in for use. 1 Place the motor base on a clean, dry, level surface such as a counter or table top. 2 Add ingredients to the cup. 3 Place the blade onto the cup and twist it on tightly until you have a good seal. (Fig. 1) 4 Turn the cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn it clockwise, the unit is ready for use.(Fig. 2) 5 Press down on the top of the cup in short intervals to activate. (Fig. 3) Fig. 1 Fig. 2 Use Fig. 3 Fig. 4 Fig. 5

ASSEMBLY PULSE REMOVAL

For best results, use short “PULSES”! 6 When you have reached your desired consistency, stop the appliance by removing your hand from the cup. Wait for the motor to stop running. Then turn the cup counterclockwise (Fig. 4) and pull straight up to remove. (Fig. 5) NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line. 7 Turn the cup upright and remove the Blade Assembly by twisting the blade assembly counterclockwise. Be sure to store the Blade Assembly attached to an empty cup when not in use. 8 Place the Sip & Seal

lid onto the cup, twist to seal and enjoy! 9 Make sure that the motor base is unplugged when not in use.14

Pro upright. Secure the power cord underneath the base by wrapping the cord around the cord wrap. Do not place anything on top. Store the cups and the rest of the attachments along side the appliance where they will not be damaged and won’t cause a hazard.

Pro features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below: 1 Unplug the appliance from the electrical outlet. 2 Remove and empty the cup and ensure that no food is jamming the cutting blades. 3 Allow the appliance to cool for approximately 30 minutes. 4 Re-install the cup onto the base and re-plug the appliance into the electrical outlet. 5 Proceed to use the appliance as before while making sure not to exceed the recommended maximum capacities.

CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning. CAUTION: DO NOT immerse the motor base into water or any other liquid. 1 Separate/remove all parts from each other. 2 Clean the motor base with a damp cloth and wipe dry. 3 Place cups in the dishwasher. Place the lids and attachments on the top rack. Use caution when handling the blade assemblies as the blades are very sharp. NOTE: You may also wash the cups by filling the cup to the Max fill line with warm water and a drop of dish washing detergent, placing the blade assembly on the cup and pulsing a few times. Do not fill the cup more than Max fill line with water because it will overflow. Once clean, remove the cup from the motor base. Rinse the cup, attachment and lid under running water. Allow all the parts to dry before storing. If the appliance needs servicing, please call customer service at 1-877-646-5288. Care & Maintenance16

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor doesn’t start or attachment doesn’t rotate.

• For the cups, make sure that the tabs are seated in the slots and turned clockwise. Food is unevenly chopped.

• Either you are chopping too much food at once, or you are not pulsing properly. Reduce the amount of food in the cup. Food is too finely chopped or too watery.

• The food has been over processed. Use short pulses for best results. Press down on the cup in short intervals. You cannot achieve snow from ice cubes.

• For best results use ice straight from the freezer. Try using short pulses instead of one long one.

• Make sure the cup is completely dry before adding ice. Cup is leaking.

• Make sure that your lid or blade assembly is properly assembled to the cup. Leaking may occur if it is misaligned when twisted onto the cup. Turn the lid tightly clockwise. Unit doesn’t turn on.

• Make sure the unit is plugged in.

• Rotate and press down on the cup to turn the unit on.

• Make sure the blade assembly is properly assembled to the cup and that it is not misaligned. Unit doesn’t turn off.

• Unplug the power cord from the electrical outlet and call customer service for support. Doesn’t mix well.

• Pulse ingredients for best results. Press down on the cup in short intervals for even blending and chopping. For frozen ingredients, pulse in short intervals of 2-5 seconds and repeat. Lid/blade assembly will not properly align to the cup.

• Set the cup on a level surface. Place the lid or blade assembly on top of the cup and align the threads so that the lid/blades sit flat on the cup. Twist clockwise so that the lid/blades evenly align to the cup until you have a tight seal.www.ninjakitchen.com

English Notes Or Your Favorite Recipes18

c dwww.ninjakitchen.com

c dwww.ninjakitchen.com

Español Product Registration Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja

product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address. The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions. The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC. If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit our website www.ninjakitchen.com. If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and a check made payable to EURO-PRO Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.* This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province. *IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.34