SKH 50 B1 - Wireless Earbuds SILVERCREST - Free user manual and instructions

Product type	Wired audio headset
Brand	SilverCrest
Model	SKH 50 B1
Dimensions (L x W x H)	approx. 19.5 cm x 19 cm x 9.5 cm
Weight	approx. 220 g
Frequency range	20 Hz - 20 kHz
Impedance	32 Ω ± 4 Ω
Sensitivity	approx. 103 dB ± 5 dB at 1 kHz
Maximum input power	50 mW
Cable length	approx. 140 cm
Connector	3.5 mm stereo jack plug
Main functions	Audio listening, additional jack for sharing with a second headset
Care and cleaning	Clean the external surfaces with a slightly damp cloth. Do not use aggressive cleaning products.
Safety	Do not use while driving or in situations requiring awareness of surrounding sounds. Avoid prolonged listening at high volume to prevent hearing damage.
Warranty	3 years from the date of purchase
After-sales service France	Phone: [phone], email: [e-mail]

Frequently Asked Questions - SKH 50 B1 SILVERCREST

How to clean the SilverCrest SKH 50 B1 headset?

Clean the external surfaces with a slightly damp cloth. Do not use aggressive or abrasive cleaning products and avoid letting liquid enter the inside of the headset.

Can I use a second headset with the SKH 50 B1?

Yes, the headset has an additional 3.5 mm jack on the right earcup for connecting a second headset. Never connect more than one additional headset to avoid damaging the playback device.

What should I do if I hear no sound in the headset?

Check that the playback device is turned on, the volume is not at minimum, and the 3.5 mm jack is fully inserted into the socket.

What should I do if I only hear sound from one side?

Check the stereo balance setting on the playback device and ensure the jack is fully inserted.

Can I use this headset while driving or cycling?

No, it is not recommended to use the headset while driving, cycling, or in any situation where the inability to hear external sounds could pose a danger.

What is the cable length of the headset?

The cable is approximately 140 cm.

How to store the headset to save space?

Fold both earcups into the headband. The headset can then be stored in a space-saving manner.

What are the recommended storage conditions?

Store the headset in a dry environment at a temperature between 0 °C and 45 °C and relative humidity ≤ 75% (without condensation).

What is the warranty period?

The headset is warranted for 3 years from the date of purchase. Keep the receipt as proof of purchase.

How to contact the after-sales service in France?

You can reach the after-sales service by phone: [phone] or by email: [e-mail].

USER MANUAL SKH 50 B1 SILVERCREST

Operating instructions

IAN 281548

DE AT CH

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Sommaire

Introduction 16

Chere cliente, cher client,

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Indice

Introduzione 30

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Index

Introduction 44

Information for these
operating instructions 44
Copyright 4 4
Limited liability. 44
Intended use 44
Warnings 45

safety. 46

Risk of hearing damage . . 46
Risk of accidents 46
Basic Safety Instructions . . 47

Commissioning 48

Items supplied 48
Disposal of the packaging 48

Operating elements .49

Handling and operation 49

Putting the headphones on 49
Using the headphones . . . 49
Connecting the second
headphones 50
Storage of the headphones 50

Cleaning 51

Storage when not in use 51

Troubleshooting . . . 5 1

Malfunction causes and remedies 51

Disposal . 5 2

Appendix 53

Technical data 53
Notes on the EU Declaration of Conformity 53
Kompernass Handels GmbH warranty 54
Service 56
Impor ter 56

Introduction

Information for these operating instructions

Congratulations on the purchase of your new appliance.

You have clearly decided in favour of a quality product. These operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety instructions. Use the product only as described and only for the specified areas of application. Retain these instructions for future reference. In addition, pass these documents on, together with the product, to any future owner.

Copyright

This documentation is copyright protected. Any duplication and/or reprinting, entirely or partially, as well as reproduction of illustrations, also in modified form, is only permitted with written consent from the manufacturer.

Limited liability

The manufacturer assumes no responsibility for damage caused by failure to observe the instructions, improper use, inappropriate repairs, making unauthorized changes or for using unapproved replacement parts.

Intended use

These headphones are a consumer electronics device. They are intended for private use for listening to audio material. This device is not intended for any other use or for uses beyond those mentioned. Claims of any kind for damage resulting from unintended use will not be accepted. The operator alone bears liability.

Warnings

In these extant operating instructions the following warnings are used:

DANGER

A warning at this risk level indicates a potentially dangerous situation.

Failure to avoid this hazardous situation could result in physical injury or death.

Follow the directives in this warning to avoid personal injuries.

TAKE NOTE

A warning at this risk level signifies potential property damage.

If the situation is not avoided it can lead to property damage.

Follow the directives in this warning to avoid property damage.

NOTICE

A notice signifies additional information that assists in the handling of the device.

Safety

In this chapter you will receive important safety information regarding the handling of the device.

These headphones comply with the prescribed safety regulations. Incorrect usage can lead to personal injury and property damage.

Risk of hearing damage

DANGER

Risks as a result of extremely high sound levels!

Loud music can lead to hearing damage.

• Avoid extreme sound levels, especially over long periods of time, when you are using these headphones.

Risk of accidents

DANGER

Danger through impaired perception!

• Acoustical warning and indication signals and environmental noises can sound different when you are wearing these headphones. Make yourself aware of how these signals deviate in their sound so that you can recognise the signals in the appropriate situations.

• Do not use the headphones while driving a vehicle, riding a bicycle, operating machinery or in any other situation in which impaired perception of ambient noise could put you or other people in danger. Please also observe the statutory provisions and regulations of the country in which you are using the headphones.

Basic Safety Instructions

For safe handling of the headphones pay heed to the following safety information:

Before use, check the headphones for visible external damage. Do not operate headphones that are damaged or have been dropped.
- Protect the cable against damage, for example caused by sharp edges, hot areas, clamping or crushing.
Damaged cables or connections should be replaced by authorised qualified personnel or by the Customer Service department.
Children and individuals who, due to their physical, intellectual or motor abilities, are incapable of operating the headphones safely must only use them under the supervision or direction of a responsible person. Permit children to use the headphones only under supervision.
DANGER! The packaging material is not a toy. Keep plastic sheeting, bags and all other packaging material away from children. There is a risk of suffocation.
Repairs to the headphones may only be carried out by authorised specialist personnel or by the Customer Service department. Incompetent repairs may result in risks for the user. In addition, warranty claims become void.
Repairs to the headphones during the warranty period may only be carried out by a Customer Service department authorised by the manufacturer, otherwise no additional warranty claims can be considered for subsequent damages.
- Do not carry out any unauthorised reconstruction or customisation to the headphones.
Protect the headphones from moisture and penetration by liquids.
- Keep the headphones away from open flames (e.g. candles) at all times.

Commissioning

Items supplied

The following components are included in delivery (see fold-out page):

• Headphones
  These operating instructions
  Remove all packaging materials.

NOTICE

• Check the contents to ensure that they are complete and for visible damage.
  If the delivery is not complete, or is damaged due to defective packaging or through transportation, contact the Service Hotline (see chapter Service).

Disposal of the packaging

The packaging protects the headphones from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material and reduces generated waste. Dispose of packaging material that is no longer needed in compliance with the regionally established regulations.

Operating elements

Pictures see fold-out page

Leftearpiece
2 Adjustable headband
3 Rightearpiece
4 3.5 mm jack socket for connection of second headphones
5 3.5mm Jackplug

Handling and operation

Putting the headphones on

When putting the headphones on, please note the side markings "R" (right) and "L" (left) on the inside of the head band 2.
Arrange the adjustable headband ② so that the headphones sit comfortably on your head and the ear pieces ① ③ cover the ears.

Using the headphones

You can connect the headphones to a variety of playback devices (e.g. CD, DVD, MP3 players, hi-fi systems, PCs and laptops).

To listen to music, proceed as follows:

Insert the 3.5 ~mm jack plug ⑤ into the socket on the playback device.
Switch the playback device on and adjust the sound volume to minimum.
Place the headphones on your head as described in the section "Putting the headphones on".
Then adjust the sound volume on the playback device to the desired level.

Connecting the second headphones

The headphones are provided with a 3.5 mm jack socket on the right-hand earpiece. You can connect a second pair of headphones there to share your listening experience with friends.

If you wish to use a second pair of headphones, insert the jack plug from the second headphones into the 3.5 ~mm jack socket on the right-hand earpiece 3.

TAKE NOTE

• Never connect more than one set of additional headphones to the 3.5 ~mm jack 4 as the low impedance of the headphones could damage the playback device.
• Never connect a second playback device to the 3.5 ~mm jack 4 as the playback device or the headphones could be damaged.

Storage of the headphones

These headphones are equipped with rotating and tilting ear pieces, so as to be able to fold them together and save storage space. To fold the headphones together, proceed as follows:

Rotate the two earpieces 1+ 3 into the headband 2. You now save space when storing the headphones.

Cleaning

TAKE NOTE

• Do not allow any liquids to penetrate inside the earclip headphones. This could cause irreparable damage to them.
• Do not use aggressive or abrasive cleaning agents, as these can damage the appliance surfaces.

Wipe the outer surfaces of the headphones with a slightly damp cloth.

Storage when not in use

Store the headphones in a dry environment.

Troubleshooting

Malfunction causes and remedies

The following table will help with localizing and remedying minor malfunctions:

Defect Possible cause Solution
No sound is coming from the headphones	The playback device is not switched on.	Switch the playback device on.
	The volume control of the playback device is set to minimum volume.	Turn the volume up on the playback device.
	The 3.5 mm jackplug 5 is not fully inserted into the playback device's headphone socket.	Insert the 3.5 mm jack- plug 5 fully into the socket.
Sound is com- ing only from one side of the headphones.	The Stereo-Balance- Control on the playback device is incorrectly adjusted.	Adjust it to the setting you desire.
	The 3.5 mm jackplug 5 is not fully inserted into the playback device's headphone socket.	Insert the 3.5 mm jack- plug 5 fully into the socket.

NOTICE

If you cannot solve the problem with the aforementioned methods please contact the Customer Service department.

Disposal

The symbol of a crossed-out wheelie bin means that this product is subject to European Directive 2012/19/EU and may not be disposed of in the domestic waste. The product must be taken to a dedicated collection point for electrical and electronic appliances.

This disposal is free of charge for the user. You will be helping to protect both the environment and your personal health and recycling valuable raw materials.

More information on disposal and the nearest collection point is available from your town council.

Appendix

Technical data

Frequency response 20 Hz - 20 kHz
Impedance 32 Ω ± 4 Ω
Sensitivity approx. 103 dB ± 5 dB at 1 kHz
Input power max. 50 mW
Broadband voltage identification (WBCV)	approx. 145 mV ± 10 %
Stereo-Jackplug 3.5 mm
Cable length approx. 140 cm
Dimensions (W x H x D) approx. 19.5 cm x 19 cm x 9.5 cm
Weight approx. 220 g
Operating temperature +5°C - +35°C
Storage Temperature 0°C - +45 °C
Humidity (no condensation) ≤ 75 %

Notes on the EU Declaration of Conformity

Regarding conformity with essential requirements and other relevant provisions, this appliance complies with RoHS Directive 2011/65/EU. The complete EU Declaration of Conformity is available from the importer.

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase. If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence. If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery. The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass. The warranty does not apply if the product has been

damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided. This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications/repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

• Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

• You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

• You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.

Service

Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IAN 281548

Importer

Please note that the following address is not the service address.

Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

DEUTSCHLAND/GERMANY

www.kompernass.com