JP737SQ - Musical instrument Jupiter - Free user manual and instructions

Product type	Clarinet
Brand	Jupiter
Model	JP737SQ
Body material	Wood (grenadilla) or synthetic resin
Number of keys	17 to 19 keys (depending on Boehm model)
Length	Approximately 67 cm (assembled)
Weight	Approximately 0.8 kg
Power	None (acoustic instrument)
Main functions	Assembly, disassembly, maintenance, playing
Maintenance and cleaning	Use a swab after playing, wipe with a soft cloth, clean mouthpiece and reed
Safety	Do not expose to extreme temperatures or humidity, do not attempt repairs yourself
Spare parts and repairability	Mouthpiece, reed, ligature, swab available; repairs by dealer or qualified technician
General information	38-page manual, available in French and other languages at notice-facile.com

Frequently Asked Questions - JP737SQ Jupiter

How to assemble the Jupiter JP737SQ clarinet?

Apply grease to the cork on the tenons. Join the two sections without pressing on the keys. Attach the barrel to the upper section, then the bell to the lower section. Align the mouthpiece table with the thumb key and position the reed with the ligature.

How to disassemble the instrument after use?

First remove the reed, ligature, and mouthpiece. Separate the sections by gently pressing on the upper keys. Remove the barrel and then the bell.

What maintenance is needed after playing?

Use a swab to remove moisture from inside the different parts. Wipe the body and keys with a soft cloth. Clean and dry the mouthpiece and reed.

How to store the clarinet?

Always store the instrument in its case after drying. Place the reed in its protector. Never leave the clarinet on a chair or where it could roll or fall.

What are the risks related to temperature?

Avoid sudden temperature changes that can crack the wood. Do not expose the instrument to extreme temperatures or humidity.

Should you oil the keys?

Yes, use very little key oil on all pivot parts. Do not overapply to avoid damaging the mechanism.

Can I repair my clarinet myself?

No, do not attempt adjustments or repairs yourself. Contact your dealer or a qualified technician.

How to clean the mouthpiece and reed?

After each use, clean the mouthpiece with lukewarm water and dry it. For the reed, gently wipe it and store it in its protective case to prevent damage.

What type of grease to use for the tenons?

Use a special cork grease for clarinet. Apply a thin layer to the cork on the tenons before assembly to make fitting easier and protect the cork.

Where can I find the complete manual for the Jupiter JP737SQ?

The manual is available for free download on notice-facile.com in PDF format, in several languages including French.

USER MANUAL JP737SQ Jupiter

Thank you for purchasing a Jupiter series clarinet. This manual provides you with basic care and maintenance instructions so you can get the most out of your instrument. We hope you will read this carefully to help alleviate any problems with your instrument and to get more enjoyment from your music.

1. Assembly
   2.Disassembly 5
2. Inspection & Maintenance 6
3. Caution 7

German

Liberally apply cork grease to the tenon corks on all joints.

Step 2.

(1.) Bb Clarinet – Connect the barrel and the upper joint.
(2.) Bb Bass Clarinet - Connect the neck and the upper joint.

Step 3.

Connect the lower joint and bell.

Step 4.

Connect the upper joint from Step 2 to the lower joint from Step 3 while depressing the ring keys of the upper joint. This prevents damage to the bridge key mechanism.

Step 5.

Attach the mouthpiece to the barrel. Align the ramp surface of the mouthpiece with the thumb register key.

Step 6.

Properly position the reed on the mouthpiece. Slide the ligature over the reed being careful not to damage the reed tip. After the ligature is properly positioned, hand tighten the ligature screws.

2 Disassembly

Step 1.

Remove the reed, ligature, and mouthpiece from the barrel.

Step 2.

Press the ring keys on the upper joint while separating the upper and lower joints.

Step 3.

Detach the upper joint from the barrel.

Step 4.

Detach the lower joint from the bell.

3 Inspection & Maintenance

Step 1.

After playing and before returning to the case, draw the cleaning swab through the body sections to remove any moisture.

Step 2.

Wipe the body and the keys gently with the supplied cleaning cloth. Take care not to scratch or damage the body or keys by improper handling.

Step 3.

Clean and dry the mouthpiece and reed. To lengthen the life of the reed, store the reed in a reed protector.

4 Caution

1. Use key oil sparingly to all pivot points to keep the keys operating smoothly.

2. To avoid damaging the key mechanism, do not exert excess pressure on the keys during assembly and disassembly.

1. Remove any excess moisture from the body and keys to prolong the instrument's finish.

2. Do not expose any instrument to excessive temperature or humidity.

3. To avoid possible damage after playing, put the clarinet in a safe place such as an instrument case or a suitable instrument stand. Do not put it on a chair, desk, or anywhere else where it could easily fall.

1. For adjustment or repair, take your instrument to a qualified technician or dealer. Don't attempt to adjust the clarinet yourself.

Specifications subject to change without notice www.jupitermusic.com