Basic 10TDTS - Log splitter Güde - Free user manual and instructions

Frequently Asked Questions - Basic 10TDTS Güde

USER MANUAL Basic 10TDTS Güde

Blue industrial machine with black components and a vertical support structure (no visible text or symbols)

ENGLISH Please read the instructions carefully before starting the machine.

Scanned document with Chinese text and a blue circular logo, likely a version or report.

Industrial machine with blue and white components, no visible text or symbols

Two black electronic devices with blue and orange buttons, no visible text or symbols on the device itself.

Two identical metal bracket shapes with curved ends, no text or symbols present

Two identical circular mechanical components with central bore and flanges, shown side by side (no text or symbols visible)

DE	Montage	SI	Montaža
GB	Assembly	HR	Montaža
FR	Montage	BG	Монтаж
IT	Montaggio	RO	Montaj
NL	Montage	BA	Montaža
CZ	Montáž
SK	Montáž
HU	Szerelés

1

2-5

DE	Inbetriebnahme	SI	Uvedba v pogon
GB	Starting-up the machine	HR	Puštanje u rad
FR	mise en service	BG	Пускане в действие
IT	Messa in funzione	RO	Punerea în funcțiune
NL	Inbedrijfstelling	BA	Puštanje u rad
CZ	Uvedení do provozu
SK	Uvedenie do prevádzky
HU	Üzembe helyezés

2

6-11

DE	Betrieb	SI	Delovanje
GB	Operation	HR	Rad
FR	Fonctionnement	BG	Pábota
IT	Esercizio	RO	Functionare
NL	Gebruik	BA	Rad
CZ	Provoz
SK	Prevádzka
HU	Üzemeltetés

3

12-16

DE	Reinigung / Wartung	SI	Čiščenje / Vzdrževanje
GB	Cleaning / Maintenance	HR	Čišćenje / Održavanje
FR	Nettoyage / Entretien	BG	Чистене / Поддръжка
IT	Pulizia / Manutenzione	RO	Curățare / Întreținere
NL	Schoonmaken / Onderhoud	BA	Čišćenje / Održavanje
CZ	Čištění / Údržba
SK	Čistenie / Údrzba
HU	Tisztítás / Karbantartás

4

17

DE	Transport / Lagerung	SI	Transport / Shranjevanje
GB	transport / storage	HR	Prijevoz / Uskladištenje
FR	Transport / Stockage	BG	Транспортиране / Съхранение
IT	Trasporto / Stoccaggio	RO	Transport / Depozitare
NL	Transport / Bewaring	BA	Prevoz / Uskladištenje
CZ	Přeprava / Uložení
SK	Transport / Uloženie
HU	Szállítás / Tárolás

5

18

1	DE Montage	SI Montaža
	GB Assembly	HR Montaža
	FR Montage	BG Монтаж
	IT Montaggio	RO Montaj
	NL Montage	BA Montaža
	CZ Montáž
	SK Montáž
	HU Szerelés

164/199,5 kg

3D illustration of a brown cardboard box with a black handle and blue label, placed on a wooden base (no text or symbols)

Industrial machine with blue and white components, no visible text or symbols

3

Blue industrial machine with visible motor and blade structure (no text or symbols)

graph TD
    A["Step 4"] --> B["Blue Block"]
    B --> C["Black Box"]
    C --> D["Arrow to Step 3"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

DE Montage

SI Montaža

GB Assembly

HR Montaža

FR Montage

BG Монтаж

IT Montaggio

RO Montaj

NL Montage

BA Montaža

CZ Montáž

SK Montáž

HU Szerelés

5 2

6 3

Blue industrial machine with mechanical components and wheels (no visible text or symbols)

8 4x

1	DE Montage	SI Montaža
	GB Assembly	HR Montaža
	FR Montage	BG Монтаж
	IT Montaggio	RO Montaj
	NL Montage	BA Montaža
	CZ Montáž
	SK Montáž
	HU Szerelés

9 L FETT GREASE R

Industrial machine diagram showing a blue base with mechanical components and a close-up of a mechanical assembly with a central spring (no text or symbols)

DE Montage

SI Montaža

GB Assembly

HR Montaža

FR Montage

BG Монтаж

IT Montaggio

RO Montaj

NL Montage

BA Montaža

CZ Montáž

SK Montáž

HU Szerelés

Technical diagram illustrating mechanical assembly steps with labeled components and directional arrows

Diagram illustrating a tree cutting process with warning symbol and checkmark, showing gear and blade alignment

Diagram of a mechanical or electrical setup with two vertical supports and a central circular component, no visible text or symbols.

2

DE Ölstand kontrollierenGB Oil level inspectionFR Contrôle du niveau d'huileIT Controllo livello d'olioNL Oliepeil controlerenCZ Kontrola stavu olejeSK Kontrola stavu olejaHU Olajszint ellenőrzése

SI Kontrola stanja oljaHR Kontrola razine uljaBG Контрол на състоянието на маслотоRO Verificarea stării uleiuluiBA Kontrola nivoa ulja

Diagram illustrating three different mechanical or safety scenarios: warning, collision detection, and tool use.

1 2

Diagram illustrating a mechanical process with labeled steps 3 and 4 showing tool positioning and hand positioning.

DE Ölstand kontrollieren

GB Oil level inspection

Illustration of a mechanical component with a red sensor and blue body, no text or symbols present

6 MAX 7,5 / 8,0 l MIN

7 Oil DIN ISO HLP 44/46 max 7,5 / 8,01

Diagram showing a red sensor or probe inserted into a blue mechanical component with a circular base (no text or symbols)

9 MAX 7,5 / 8,01 MIN

2

DE Spaltlänge einstellenGB Gap length settingFR Réglage de la longueur de la fenteIT Impostazione di lunghezza della fessuraNL Splijtlengte instellenCZ Nastavení délky mezerySK Nastavenie dĺžky medzery

HU Hézaghossz beállításSI Nastavitev dolžine presledkaHR Podešavanje duljine razmakaBG Pergулиране на дължината на пролукатаRO Reglarea lungimii decalajuluiBA Podešavanje dužine razmaka

1

2 STOP

3

4

5 AUTO-STOP

DE	Zwischentisch / Schwenktisch	HU	Köztes asztal / Forgóasztal
GB	Intermediate table / Turntable	SI	Vmesna miza / Vrtljiva miza
FR	Table intermédiaire / Table orientable	HR	Međustol / Obrtni tol
		BG	Междинна маса / Въртяща се маса
IT	Tavolo intermedio / Tavolo rotante	RO	Masă intermediară / Masă rotativă
NL	Tussentafel / Zwenktafel	BA	Međustol / Obrtni stol
CZ	Mezilehlý stůl / Otočný stůl
SK	Medzi’ahlý stôl / Otočný stôl

2

1 2 90° 3 4

Diagram illustrating a mechanical device operation with labeled steps 1 and 2 showing tool positioning and adjustment.

	DE Spaltkreuz	SI Klin
	GB Wedge	HR Klin
	FR Coin	BG Клин
	IT Cuneo	RO Pană
	NL Splijtkruis	BA Klin
	CZ Klín
	SK Klin
	HU Ék

Black metal mechanical component with four blades, no visible text or symbols on the device itself.

Industrial machine with blue frame and black blades, no visible text or symbols

2 1 2

Diagram illustrating eye detection and checkmark behavior, showing eye with target and shield, and checkmark with red X

DE Spaltkreuz

SI Klin

GB Wedge

HR Klin

FR Coin

BG Клин

IT Cuneo

RO Pană

NL Splijtkruis

BA Klin

CZ Klin

SK Klin

HU Ék

2

Diagram illustrating safety warning symbols and three circular icons with checkmarks, likely from a technical or industrial context.

Close-up of a mechanical lever mechanism with blue and black components, no visible text or symbols

Diagram illustrating mechanical assembly with labeled components and directional arrows, showing a piston, lock, and gear mechanism.

	DE	Betrieb	SI	Delovanje
	GB	Operation	HR	Rad
	FR	Fonctionnement	BG	Pábota
	IT	Esercizio	RO	Functionare
	NL	Gebruik	BA	Rad
	CZ	Provoz
	SK	Prevádzka
	HU	Üzemeltetés

min. 250 mm min. 120 mm max. 1330 mm max. 400 mm

Two-panel illustration showing a wooden log with a green checkmark and a cross-section of a cut wooden log (no text or symbols)

Two-panel image showing a brown cylinder with a green checkmark and a red X mark, likely illustrating a correct vs. incorrect scoring method.

TIP FETT GREASE

Pixelated illustration of a blue forklift with black handle and green checkmark indicating alignment (no text or symbols)

GB Operation - START

START 3 STOP

TEST

START

Illustration of a blue forklift with a green checkmark indicating inspection or approval (no text or symbols present)

STOP

Pure mechanical diagram showing a blue tool with a red X mark, no text or symbols present

400 V

180^

Simple diagram of a circular object with internal symbols and curved arrows, no readable text or labels

START

Mechanical assembly diagram showing a central shaft with two arms and a blue base, no text or symbols present.

Close-up of a yellow mechanical component with a black base and circular button, no visible text or symbols

1min

Diagram of a robotic arm with blue actuators and a central vertical support (no text or symbols)

Illustration of a blue forklift lifting a black load, with an upward arrow indicating force (no text or symbols)

3

DE Betrieb - STOP

GB Operation - STOP

Close-up of a yellow industrial electrical switch component with a white arrow pointing to the internal button (no text or symbols visible)

STOP 2

Close-up of a yellow and red electrical switch component with mounting holes (no text or symbols visible)

1

Diagram showing a yellow component with red pin and arrow pointing to a hand gesture (no text or symbols)

2

Close-up of a yellow and red mechanical component next to a black padlock (no text or symbols visible)

3

Diagram illustrating a lock mechanism with labeled components including a yellow connector, red valve, eye icon, and black lock symbol.

DE Betrieb

GB Operation

FR Fonctionnement

IT Esercizio

NL Gebruik

CZ Provoz

SK Prevádzka

HU Üzemeltetés

SI Delovanje

HR Rad

BG Работа

RO Functionare

BA Rad

Safety warning sign with hazard symbol, forklift, and human silhouette with checkmark

Prohibition sign with pictograms of two human figures and a blue forklift, crossed by red diagonal lines

1 1 1

Mechanical assembly diagram showing a cylindrical component with two side supports and directional arrows, labeled with numbers 2 (no text or symbols on the diagram itself)

3

Diagram of a mechanical assembly with labeled part '4' and directional arrows (no readable text or symbols)

3D diagram of a mechanical device with a central cylinder and upward arrow, no text or symbols present

Diagram of a mechanical device with a central shaft and multiple arms, no visible text or symbols

	DE	Blockierung lösen	SI	Popuščanje blokade
	GB	Locking release	HR	Popuštanje blokade
	FR	Desserrage du blocage	BG	Освобождаване на блокирането
	IT	Sbloccaggio	RO	Degajarea blocárii
	NL	Blokkering losmaken	BA	Popuštanje blokade
	CZ	Uvolnění blokování
	SK	Uvol'nenie blokovania
	HU	Blokkolás kioldás

Safety warning symbols including circuit breaker, helmet, hand gesture, tire, and hazard warning

3D diagram of a mechanical device with labeled components and warning symbol (no readable text or labels)

1 ca. 50 mm 17

2 STOP →

3

Diagram of a mechanical assembly with cross-shaped components and red tool paths (no text or symbols)

GB Cleaning / Maintenance

FR Nettoyage / Entretien

GB transport / storage

FR Transport / Stockage

NL Transport / Bewaring

Silhouette of a person pushing a blue forklift with an arrow indicating direction (no text or symbols)

Diagram showing a forklift operation with three prohibition symbols: no litter, snowflake, and happy child.

Illustration of a blue forklift with a green checkmark indicating inspection or status (no text or symbols)

Safety warning sign showing a blue truck with red prohibition crossed and a warning symbol with a yellow exclamation mark.

Technische Daten

Holzspalter Basic 10T/DTS Basic 14T/DTS ECO

Log splitter Basic 10T/DTS Basic 14T/DTS ECO

Art. No 02035 02070

Service connection....400 V\~50 Hz....400 V\~50 Hz

Motor output S6/ 40% ....3700 W....4300 W/P1

Max. splitting pressure....10 t....14 t

Max. splitting uplift ....540 mm....500 mm

Forward speed....0,04 - 0,05 m/s....0,04 m/s

Reverse speed....0,10 - 0,12 m/s....0,10 m/s

Hydraulics tank (HLP 46)....8 l....7,5 l

Noise and Vibration Information

Sound pressure level L _PA^1) ....80 dB (A)....77 dB (A)

Sound power level L_W(A)^1) .....91 dB (A).....88 dB (A)

Vibration emission value a_h .....2,5 m/s ^2 .....2,5 m/s ^2

^1) Uncertainty K = 3 db (A)

WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.

The vibration emission level may be used to compare one tool with another.

It may be used for a preliminary assessment of exposure.

An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

Read and understand the operating instructions before using the appliance. Abide by all

the safety measures stated in the service manual. Act responsibly toward third parties.

In case of any doubts about connection and operation refer please to our customer center

Specified Conditions Of Use

The wood splitter has only been designed to split wood in the fibre direction. Respecting technical data and safety precautions.

When splitting, it is essential to make sure the split wood only contacts the checkered sheet of the bottom plate or the checkered sheet of the splitting desk.

It is essential to follow instructions for installation, operation, repairs, etc. to prevent hazards and damage.

Please do not forget that this machine, as designed, is not intended for industrial use.

Make sure there are no persons in the working area during operation or make sure such persons keep a sufficient safety distance.

The wood splitter has been designed to be operated by 1 person. The machine must never be operated by two or more persons.

Wood splitter being operated by two persons, with one holding a piece of wood and the other controlling the clamps is strictly prohibited.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Safety Instructions

Electrical connection

WARNING! Electric shock! There is a risk of injury caused by electric shock!

Operation is only allowed with a safety tch against stray current (RCD max. stray rent of 30mA).

Check the voltage. Technical data given on the type label must correspond with electric network voltage.

Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency complying with current regulations.

Only for 400 volt machines: It is essential to respect the engine rotation direction (see the arrow on the engine) as operation in wrong direction would damage the oil pump. Warranty claims cannot apply in such a case. Change the rotation direction by turning the connector polarity if necessary.

Pursuant to the provisions of „CE“ professional associations, etc., all splitters are fitted with an undervoltage release in the switch. This will prevent accidental repeated starting in case of current interruption due to power failure, accidental unplugging, defective fuse, etc. The machine must necessarily be turned on again by repeated pressing of the green switch.

Wilful holding or blocking of the switch, unless being a neutral, will automatically lead to switch failure. The warranty will not apply in such a case that must naturally be checked.

• The machine meets the EN 61000-3-11 requirements and is subject to special connection conditions. That means that a use on optional points of connection is not allowed.
• The machine may cause temporary voltage fluctuation in adverse conditions.
- The machine has only been designed to be used on points of connection not exceeding the maximum allowable network impedance Z_ = 0.233 .
- As a user, you must make sure, after consultation with your energy provider, if necessary, that your point of connection on which the machine is to be operated meets the requirements above.

Working area

For safe wood splitting, it is essential that the working area is flat and slip-resistant and that a sufficient space for moving is provided. To take the wood splitter to your home, it is necessary there are no obstacles in the way, i.e. no risk of tripping. Adequate lighting of the working area needs to be provided.

Work preparation

Before putting the machine into operation, working of the safety guards (two-lever operation system, in particular) must be checked.

- Put both control levers down and the splitter knife down, app. 5 cm above the desk.

• One control lever to be released at all times, with the splitter knife remaining in the selected position.

CAUTION! Whenever the machine is to be put into operation, make sure the splitter desk is firmly and safely fitted to the machine.

operation

Power supply must be interrupted by pressing the red button on the switch and unplugging the machine for any repair or servicing work or when leaving the wood splitter. Turning to the Off position is not enough to interrupt the power supply.

Using the wood splitter may lead to some hazards. Therefore, the machine may only be handled by instructed and experienced persons. The operator must wear close-fitting clothing and safety shoes.

Residual risks

Dry and dried-up wood may jump up when being split and injure the face of the operator. Adequate protective clothes to be worn!

⚠ Wooden pieces produced during splitting may fall down and injure legs of the operator.

When splitting wood, parts of body may be crushed or separated due to hydraulic knife lowering.

There is a risk of branchy wood getting stuck when being split. Please be advised that wood being separated is under heavy pressure and your fingers may get squeezed in the gap.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.

Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.

Minimum age: Persons over 18 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:

1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

Maintenance

⚠️ Unplug the machine before any work on it.

Carry out a visual inspection before any use to make sure the appliance, especially the cutting tools, fastening parts and the entire cutting unit are not damaged.

The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.

The hydraulic hoses and connections must be checked if tight enough after app. 4 hours of operation and tightened if necessary.

If the device is defective, the repair has to be made exclusively by the customer service.

Use only original accessories and original spare parts.

Never clean the machine and its components with solvents, flammable or toxic liquids. Us only a damp cloth making.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Symbols

Read the Operating Instructions

Wear eye protective goggles! Wear ear protectors!

Safety gloves to be used!

Safety shoes to be used

Use of crane

Caution! Moving parts of the machine!

To be operated by 1 person only!

Do not touch in the splitting area!

Protect against humidity. Never expose tool to rain.

WARNING/Caution!

Dangerous voltage

Caution - hot surface!

Danger of burns!

Warning against hand injuries

Keep distance of persons

Observe to keep out of dangerous zone

Warning against thrown-off items

Warning against a risk of tripping

Warning against hand injury by the splitter knife

Engine rotation direction

2 people are needed for implementation.

Any damaged or disposed devices must be delivered to appropriate collection centres.

Protect against humidity

This side up

Warranty

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with indication of date of sale must be presented in case of claiming for the warranty rights.

Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:

Serial No.:

Art. No:

Year of production:

Tel.: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Failure removal

Failures Causes Removal
Engine does not start No power in the socket Check the fuse
	Defective electric extension cable Pull the plug out, check it, replace it
	Wrong connecting cable 5-wire connection at 2.5 mm section ^2 cross
	Defective condenser switch Have the machine checked by a professional electrician
Wrong engine rotation direction Wrong connection Use a screwdriver to turn the phase-changing switch in the power supply
Splitting knife is not moving Adjust the two-hand control and starting levers		Defective control valve - to be replaced in a service centre only
Splitter has no power	Wrong rotation direction Have the rotation direction changed by a professional
	Few hydraulic oil Hydraulic oil to be added
	Trigger is bent; hydraulic piston on the valve is not fully seated	Check all screws on the triggerAdjust the trigger so that the hydraulic piston on the valve is fully seated
	Wood has many knobs and the splitting knife is getting stuck	Lubricate the splitting knife
	Control arm is bent Put the control arm back to the starting position
The green supply button does not hold after being pressed	Defective fuse, etc. Check the cable
	2-phase running
Hydraulic pump is whistling, splitting knife running jerkily	Oil loss, bottom contamination Tighten the screwsReplace the hose
	Few hydraulic oil Hydraulic oil to be added

WAARSCHUWING/Opgelet!

Attentie, elektrische stroom

EC-DECLARATION OF CONFORMITY

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives. In case of any change to the appliance not discussed with us the Declaration expires.

DECLARATION CE DE CONFORMITE

PROHLASENI O SHODE EU

# 2035	/ Log splitter_Basic 10T/DTS
#	/
#	/
#	/

2006/95/EC 2004/108/EC

2009/105/EC 1907/2006/EC

2011/65/EC ROHS 2009/142/EC

89/686/EEC (PPE) 1935/2004/EC

□ □

2006/42/EC

Annex IV

Notified Body:

Reg. No.:

2000/14/EC_2005/88/EC

Noise: guaranteed L_WA 91 dB (A)

97/6 8/EC_

Emission No.:

2006/95/EC 2004/108/EC

2009/105/EC 1907/2006/EC

2011/65/EC ROHS 2009/142/EC

89/686/EEC (PPE) 1935/2004/EC

□ □

2006/42/EC

Annex IV

Notified Body:

Reg. No.:

2000/14/EC_2005/88/EC

Noise: guaranteed L_WA 88 dB (A)

97/6 8/EC_

Emission No.: