TN10200 - Ironing board SIEMENS - Free user manual and instructions

USER MANUAL TN10200 SIEMENS

S I E M E N S ENglISH General safety instructions ❐ This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction. ❐ Children should be supervised to ensure that they do not play with the appliance. When using your steam station or iron for the rst time, it is essential to read the instructions for use which came with your steam station and iron. ❐ The iron must not be left unattended while it is connected to the supply mains. ❐ Remove the plug from the socket before lling the appliance with water or before pouring out the remaining water after use. ❐ The appliance must be used and placed on a stable surface. ❐ When placed on its stand, make sure that the surface on which the stand is placed is stable. ❐ The iron should not be used if it has been dropped, if there are visible signs of damage or if it is leaking water.It must be checked by an authorized Technical Service Centre before it can be used again. ❐ With the aim of avoiding dangerous situations, any work or repair that the appliance may need, e.g. replacing a faulty mains cable, must only be carried out by qualied personnel from an Authorised Technical Service Centre.

CAUTION. Hot surface. Surface is liable to get hot during use. Thank you for buying the TN10 active ironing board from Siemens. Carefully read through the operating instructions for the appliance before using, and safeguard them for future reference. You can download this manual from the local homepages of Siemens. EN • Operating instructions11 S I E M E N S ENglISH Important notices

• This appliance has been designed exclusively for domestic use and must not be used for industrial purposes.

• Only use the active ironing board for the purpose for which it is intended and not as a rest support, stool, etc.

• Packaging materials (plastic bags, polystyrene, etc.,) are a potential source of danger and must be kept out of reach of children.

• Check the condition of the appliance when it is unpacked. If in doubt, do not use the appliance and consult a qualied technician.

• Do not move the ironing board while is in use, nor adjust the height level, The steam station or the iron might otherwise fall off or the active ironing board might close down.

• This appliance is to be connected to the mains supply and used in accordance with the information stated on its specications plate.

• This appliance must be connected to an earthed socket. If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A or more and has a socket with a earth connection.

• Do not touch the appliance with wet or damp hands.

• Unplug the appliance from the mains supply after each use, before cleaning or if a fault is suspected.

• Do not let the mains cord hang down.

• Always loop the active ironing board’s cord loosely. Avoid kinking the cord

• The electrical plug must not be removed from the socket by pulling the cable.

• Do not leave the appliance exposed to weather conditions (rain, sun, frost, etc.)

• Do not allow any moisture to access electrical components.

• Do not block with any object the air outlet underneath the iron rest.

• The active ironing board must always be used in a dry environment and must not be used outdoors. It must always be set up in a safe location on a level surface. The height adjustment setting of the active ironing board must always be in the locked position.

• Only dry or damp cloth should be ironed. Never wet ones.

• When the appliance is to be disposed of, it should be rendered unusable (e.g. by cutting off the cord and plug). Advice on disposal Our goods come in optimized packaging. This basically consists in using non-contaminating materials which should be handed over to the local waste disposal service as secondary raw materials. Your local town council can give you information about how to dispose of obsolete appliances. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. Description

1. Special ironing board cover.

2. Height adjustment level

S I E M E N S ENglISH Technical data Power supply 230 - 240 V ~ 50 Hz Weight 8.5 kg Blower 21 W Active ironing board dimensions When folded up (LxWxD) 165x46x15 cm Height adjustment range 75-100 cm Steam station information Max. size, (LxW) 37x22 cm Max. weight 7.5 kg Max. power 3250 W Please use only steam stations and irons which are suitable for use with this equipment.

1. Stand the active ironing board on a rm, level

2. Unwind the cord and carefully move the frame

forwards. The active ironing board folds out and can be set to the required position. The active ironing board can then be tipped forward to stand on the oor.

3. The active ironing board has 6 height

adjustable positions (max. height is approx. 100cm) so that you can stand or sit to iron. To adjust the height, take hold of the ironing board with both hands. Lift the ironing board up slightly and pull the lever with one hand (the ironing board has to be slightly raised for safety reasons, i.e. to prevent the lever from being activated accidentally). Only when you hear the ironing board lock into place is it secure. Steam station can be placed now on the rest (Figure 1.1). If you are going to use a steam iron instead, ensure that it is placed over the rubber strips in the ironing rest (Figure 1.2).

• To ensure trouble-free ironing, the steam station must be correctly positioned on the iron rest in a horizontal position.

• Plug the mains plug of the active ironing board into a wall socket.

• Then plug the steam station/iron mains plug into the socket, thus providing a power supply to the steam station/iron. The active ironing board is ready for use. Always check the washing/ironing instructions which are to be found on the labels of your garments and linens, as well as the advice and regulations in the instructions for use which came with your steam station and iron.

See the leaet sides Suction function Holds the fabric rmly on the board to prevent creasing.

2.1 Steam extraction

• Enables the steam to penetrate the bres better, thus saving time and improving ironing results.

• Keeps the Active Ironing Table dry and helps to dry fabrics even whilst they’re being ironed.

• Enables laundry items to cool off faster by the throughput of air, thereby preserving the fabric quality. Should be switched on continuously when ironing with steam, in order to remove excess steam from the Active Ironing Table and from inside the housing and prevent possible water drops when storing the board.13 S I E M E N S ENglISH

It provides crease-free ironing results with delicate fabrics and items of clothing resting on a cushion of air.

• Protects delicate items.

• Enables laundry items to cool off faster by the throughput of air, thereby preserving the fabric quality. For dry ironing without steam, the blower functions can remain switched off.

3.1 When you have nished, proceed

1. Before removing the steam station/iron,

ensure that you have read the instructions for use which came with your steam station and iron.

2. Switch off the active ironing board (“O” setting).

Disconnect the cord for the active ironing board from the mains. Take the steam station / iron plug out of the socket.

3. Remove the steam station / iron from the rest.

3.2 To store the active ironing board

1. Take hold of the active ironing board with both

hands, lift it up slightly and fold together using the lever.

2. Wind the cord up loosely in loops, making

sure that it is not squashed or kinked. The active ironing board can be stored away folded up (with the universal iron rest at the top). Place the active ironing board in a safe position so that it will not fall over. The transport lock should be engaged to secure the frame whilst the board is folded up. Cleaning The active ironing board can only be cleaned when the plug is disconnected from the mains and when the steam station/iron has cooled down. Clean using a soft, damp cloth to wipe down the appliance. Do not use detergents of any kind. A replacement for the ironing board cover can be purchased from After-sales or specialist outlets. Accesories A replacement for the active ironing board can be purchased from After-sales. Ironing board cover. Model Accessory code TN10100