PLM4110 - Lawn mower MAKITA - Free user manual and instructions

Frequently Asked Questions - PLM4110 MAKITA

USER MANUAL PLM4110 MAKITA

Explanation of general view

1. Upper handle

2. Grass sack

3. Oil cap

4. Stop control handle

5. Height adjusting lever

6. Cable clamp

7. Engine speed lever

8.Deck

1. Locking knob

2. Starter handle

3. Spark Plug

4. Fast speed

5. Rope guide

6. Fuel cap

7. Slow speed

WARNING

For your own safety please read this manual before attempting to operate your new unit. Failure to follow instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your mower before each use.

1. SYMBOLS MARKED ON THE PRODUCT

Read operator's manual.

Keep bystanders away.

Pay more attention to the operator's hands and feet to avoid injured.

Fuel is flammable, keep fire away. Do not add fuel with running machine.

Toxic fumes; Don't operate inside house.

When mowing, please wear the glasses and ear plugs to defend the operator himself.

When repairing, please picks up the spark plug, then repairs it according to the operational manual.

Caution: Engine hot.

Release switch handle to stop the motor.

2. GENERAL SAFETY RULES

WARNING: When using petrol tools, basic safety

precautions, including the following, should always be followed to reduce the risk of serious personal injury and/ or damage to the unit.

Read all these instruction before operating this product and retain these instructions for future reference.

Training

• Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.
• Never allow children or people unfamiliar with these instructions to use the lawn mower. Local regulations can restrict the age of the operator.
• Never mow while people, especially children, or pets are nearby.
• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

• While mowing, always wear substantial footwear and long trousers. Do not operate the equipment when barefoot or wearing open sandals.
• Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown by the machine.

• WARNING-Petrol is highly flammable.

• store fuel in containers specifically designed for this purpose;

• refuel outdoors only and do not smoke while refueling;
• add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot;
• if petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapors have dissipated;

• replace all fuel tank and container caps securely.

• Replace faulty silencers.

• Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

Operation

• Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.
• Mow only in daylight or in good artificial light.
• Avoid operating the equipment in wet grass, where feasible.
• Always be sure of your footing on slopes.
• Walk, never run.
• For wheeled rotary machines, mow across the face of slopes, never up and down.
  Exercise extreme caution when changing direction on slopes.
• Do not mow excessively steep slopes.
• Use extreme caution when reversing or pulling the lawn mower towards you.
• Stop the blade(s) if the lawn mower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawn mower to and from the area to be mowed.
• Never operate the lawn mower with defective guards, or without safety devices, for example deflectors and/or grass catchers, in place.
• Do not change the engine governor settings or overspend the engine.
• Disengage all blade and drive clutches before starting the engine.
• Start the engine carefully according to instructions and with feet well away from the blade(s).
• Do not tilt the lawn mower when starting the engine.
• Do not start the engine when standing in front of the discharge chute.
• Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.
• Never pick up or carry a lawn mower while the engine is running.

• Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted remove the key:

• before clearing blockages or unclogging chute;

• before checking, cleaning or working on the lawn mower;

• after striking a foreign object. Inspect the lawn mower for damage and make repairs before restarting and operating the lawn mower;

• if lawn mower starts to vibrate abnormally (check immediately).

• Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted remove the key:

• whenever you leave the lawn mower;

• before refueling.

• Reduce the throttle setting during engine shut down and, if the engine is provided with a shut-off valve, turn the fuel off at the conclusion of mowing.

• Only use the lawn mower for the purpose for which it is designed, for cutting and collecting grass. Any other use can be hazardous, causing damage to the machine.

Maintenance and storage

• Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
• Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark.
• Allow the engine to cool before storing in any enclosure.
• To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage area free of grass, leaves, or excessive grease.
• Check the grass catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done outdoors.

WARNING: Do not touch rotating blade.

WARNING: Refuel in a well ventilated area with

the engine stopped.

3. PARTS DESCRIPTION (Fig. 1 & 2)

Including

A: Spark plug wrench
B: Mulching wedge

4. TECHNICAL DATA

Model PLM4110 PLM4610
Engine type	B&S 500 series, 10T5, Family 8BSXS.1581VG	B&S 625 series, 122T, Family 8BSXS.1901VG
Self Propel No No
Engine Displacement 158 cc 190 cc
Blade Width 410 mm 460 mm
Idle Speed 2,800/min	2,800/min
Fuel Tank Capacity	0.8L	1.0L
Oil tank capacity	0.6L	0.6L
Model	PLM4110	PLM4610
Grass catch bag capacity 50L 60L
Net Weight 27.5 kg 31.1 kg
Height adjustment	20-75 mm, 5 adjustment	20-75 mm, 5 adjustment
Noise according to EN836
Sound pressure level (LpA):	82 dB (A)	83.5 dB (A)
Sound power level (LwA):	93.3 dB	(A)
Uncertainty (K):	2.41 dB (A)	2.47 dB (A)
Vibration according to EN836
Vibration emission (ah):	4.7 m/s2	5.7 m/s2
Uncertainty (K):	1.5 m/s2	1.5 m/s2

5. ASSEMBLY

5-1 ASSEMBLY THE FOLDING HANDLE

A) Fix the lower handlebars into the unit body with locking knobs as shown. (Fig. 3, Fig. 4, Fig. 5, Fig. 6)
B) Release the upper handlebars for folding. Connect the upper handle and the lower handle with the locking knob. (Fig. 7, Fig. 8)
C) Position all cables over the handle shafts. Clamp them around the middle of lower handles by the cable clamps so that the cables are fixed on the outside of the machine. Otherwise the cables may be pinched by opening/closing the rear cover or forced by folding the upper handle. (Fig. 9)

5-2 ASSEMBLY THE GRASS CATCHER

1. To fit: Lift the rear cover and hang the grass catcher on the shaft of rear of mower. (Fig. 10, Fig. 11)
2. To remove: Grasp and lift the rear cover, remove grass catcher.

5-3 STARTER HANDLE

Move the starter handle from the engine to the rope guide. (Fig. 12, Fig. 13)

5-4 HEIGHT OF CUT

Apply outward pressure to disengage lever from rack. Move lever forward or back to adjust height. (Fig. 14 and see clause 7-9)

6. ADJUSTMENT FOR AN APPROPRIATE HEIGHT

1) Back out the locking knob which fixed the lower handle, refer to Fig. 15.
2) Refer to Fig. 16, move the lower handle up and down, adjust it to the proper height. There is 3 adjusting height to be choose on this type lawn mower; at 1 height, lower handle to the ground is highest., 3 height is the lowest.
3) Adjusting to the proper height, then fix the lower handle by the locking knobs.

WARNING: The left side and right side of lower

handle must adjust to the same height.

7. MULCHING MOWER

What is mulching?

When mulching, the grass is cut in one working step, then finely chopped and returned to the grass strip as natural fertilizer.

Hints for mulch-mowing:

• Regular cut-back by max. 2 cm form 6 cm to 4 cm grass height.
• Use a sharp cutting knife.
• Do not mow wet grass.
• Set max. Motor speed.
• Only move at working pace.
• Regularly clean mulching wedge, housing inner side and mowing blade.

WARNING: Only with a stopped motor and

standstill cutter.

1. Raise the rear cover and remove the grass catcher;
2. Push the mulching wedge into the deck. Lock the mulching wedge with the button into the opening on the deck. (Fig. 17, Fig. 18)
3. Lower the rear cover again.

8. OPERATING INSTRUCTIONS

8-1 BEFORE STARTING

Service the engine with gasoline and oil as instructed in the separate engine manual packed in your mower. Read instructions carefully.

WARNING: Petrol is highly flammable.

Store fuel in containers specifically designed for this purpose.

Refuel outdoors only, before starting the engine and do not smoke while refueling or handling fuel.

Never remove the cap of the fuel tank or add petrol while the engine is running or when the engine is hot.

If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapors have dissipated.

Replace all fuel tanks and container caps securely.

Before tipping the lawn mower to maintain the blade or drain oil, remove fuel from tank.

WARNING: Never fill fuel tank indoors, with

engine running or until the engine has been allowed to cool for at least 15 minutes after running.

8-2 TO START ENGINE AND ENGAGE BLADE

1. The unit is equipped with a rubber boot over the end of the spark plug, make certain the metal loop on the end of the spark plug wire (inside the rubber boot) is fastened securely over the metal tip on the spark plug.
2. When starting cool engine, turn engine speed lever to " position. When starting warm engine and Operating, turn engine speed lever to " position. (Fig. 19)
3. Standing behind the unit, grasp the stop control handle and hold it against the upper handle as shown in Fig. 20.
4. Grasp the starter handle as shown Fig. 20 and pull it up rapidly. Return it slowly to the rope guide bolt after engine starts. Release the stop control handle to stop the engine and blade.

Start the engine carefully according to instructions and with feet well away from the blade.

Do not tilt the lawn mower when starting the engine. Start the mower on a level surface, free of high grass or obstacles.

Keep hands and feet away from the rotating parts. Do not start the engine when standing in front of the discharge opening.

During operation, tightly hold the stop control handle with both hands.

Note: During operation, when the stop control

handle is released, the engine will stop and thus stopping the lawn mower from operating.

8-4 TO STOP ENGINE

CAUTION: The blade continues to rotate for a

few seconds after the engine is shut off.

1. Release the stop control handle to stop the engine and blade.
2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while equipment is unattended.

8-5 FOR THE BEST RESULTS WHEN MULCHING

Clear lawn of debris. Be sure that the lawn is clear of stones, sticks, wire or other foreign objects which could be accidentally thrown out by the mower in any direction and cause serious personal injury to the operator and others as well as damage to property and surrounding objects. Do not cut wet grass. For effective mulching do not cut

wet grass because it tends to stick to the underside of the deck preventing proper mulching of the grass clippings. Cut no more than 1/3 the length of the grass.

The recommended cut for mulching is 1/3 the length of the grass. Ground speed will need to be adjusted so the clippings can be dispersed evenly into the lawn. For especially heavy cutting in thick grass it may be necessary to use one of the slowest speeds in order to get a clean well mulched cut. When mulching long grass you may have to cut the lawn in two passes, lowering the blade another 1/3 of the length for the second cut and perhaps cutting in a different pattern than was used the first time.

Overlapping the cut a little on each pass will also help to clean up any stray clippings left on the lawn. The mower should always be operated at full throttle to get the best cut and allow it to do the most effective job of mulching. Clean underside of deck.

Be certain to clean the underside of the cutting deck after each use to avoid a build-up of grass, which would prevent proper mulching. Mulching leaves. The mulching of leaves can also be beneficial to your lawn. When mulching leaves make sure they are dry and are not laying too thick on the lawn. Do not wait for all the leaves to be off the trees before you mulch.

WARNING: If you strike a foreign object, stop the

engine. Remove wire from spark plug, thoroughly inspect the mower for any damage and repair the damage before restarting and operating the mower. Extensive vibration of the mower during operation is an indication of damage. The unit should be promptly inspected and repaired.

8-6 GRASS CATCHER

Empty and clean the bag, make sure it is clean and ensure its meshwork is ventilated. (Fig. 21)

8-7 DECK

The underside of the mower deck should be cleaned after each use to prevent a buildup of grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion, and may prevent proper mulching. The deck may be cleaned by tilting the mower and scraping clean with a suitable tool (make certain the spark plug wire is disconnected).

8-8 HEIGHT ADJUSTMENT INSTRUCTIONS

CAUTION: Do not at any time make any attempt to lawnmower without first stopping the engineer's connecting the spark plug wire.

CAUTION: Before changing mowing height, stop and disconnect spark plug cable. Your mower is used with a central height adjustment lever offering at positions.

1. Stop mower and disconnect spark plug cable before changing mower cutting height.

2. The central height adjustment lever offers you 5 different height positions.

3. To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down to selected height (Fig. 22). All wheels will be in the same height of cut.

9. MAINTENANCE INSTRUCTIONS

SPARK PLUG

Use only original replacement spark plug. For best results, replace the spark plug every 100 hours of use. (refer to ENGINE OWNER'S MANUAL)

10. LUBRICATION INSTRUCTIONS

CAUTION: DISCONNECT SPARK PLUG

BEFORE SERVICING.

1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.
2. ENGINE-Follow engine manual for lubrication instructions.
3. BLADE CONTROL-Lubricate the pivot points on the blade control handle and the brake cable at least once a season with light oil. The blade control must operate freely in both directions.

11. CLEANING

CAUTION: Do not hose engine. Water can

damage engine or contaminate the fuel system.

1. Wipe deck with dry cloth.
2. Hose under deck by tilting the mower so that the spark plug is up.

11-1 ENGINE AIR CLEANER

CAUTION: Do not allow dirt or dust to clog the air

filter foam element.

The engine air cleaner element must be serviced (cleaned) after 25 hours normal mowing. The foam element must be serviced regularly if the mower is used in dry dusty conditions. (refer to ENGINE OWNER'S MANUAL)

To CLEAN AIR FILTER

1. Remove screw.
2. Remove cover.
3. Wash filter element in soap water. DO NOT USE GASOLINE!
4. Air dry filter element.
5. Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any excess oil.
6. Reinstall filter.

NOTE: Replace filter if frayed, torn, damaged or

unable to be cleaned. (Fig. 23 for PLM4110)

11-2 CUTTING BLADE

CAUTION: Be sure to disconnect and ground the plug wire before working on the cutting blade to aaccidental engine starting. Protect hands by using gloves or a rag to grasp the cutting blades. Over as specified in separate engine manual.

Remove the hex bolt and washer which hold the blade and blade adapter to the engine crankshaft. Remove the blade and adapter from the crankshaft.

WARNING: Periodically inspect the blade

adapter for cracks, especially if you strike a foreign object. Replace when necessary.

For best results your blade should be sharp. The blade may be resharpened by removing it and either grinding or filing the cutting edge keeping as close to the original bevel as possible. It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade. Improper blade balance will result in excessive vibration causing eventual damage to the engine and mower. Be sure to carefully balance blade after sharpening. The blade can be tested for balance by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly. (Fig. 24) Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil. Install the blade adapter on the crankshaft with the "star" away from the engine. Refer to Fig. 24. Place the blade with the part number facing away from the adapter. Align the washer over the blade and insert the hex bolt. Tighten the hex bolt to the torque listed below.

11-3 BLADE MOUNTING TORQUE

Center Bolt must be tightened to 35 - 45 Nm torque. To insure safe operation of your unit. ALL nuts and bolts must be checked periodically for correct tightness. After prolonged use, especially in sandy soil conditions, the blade will become worn and lose some of the original shape. Cutting efficiently will be reduced and the blade should be replaced.

Replace with an approved factory replacement blade only. Possible damage resulting from blade unbalance condition is not the responsibility of the manufacturer. When you change the blade, must use the original type marked on the blade (MAKITA 263001433 for PLM4110; MAKITA 263001451 for PLM4610) (for order the blade, pls. contact your local dealer or call our company)

WARNING: Do not touch rotating blade.

11-4 ENGINE

Refer to the separate engine manual for engine maintenance instructions.

Maintain engine oil as instructed in the separate engine manual packed with your unit.

Read and follow instructions carefully.

Service air cleaner as per separate engine manual under normal conditions. Clean every few hours under extremely dusty conditions. Poor engine performance and

flooding usually indicates that the air cleaner should be serviced.

To service the air cleaner, refer to the separate engine manual packed with your unit.

The spark plug should be cleaned and the gap reset once a season. Spark plug replacement is recommended at the start of each mowing season; check engine manual for correct plug type and gap specifications.

Clean the engine regularly with a cloth or brush. Keep the cooling system (blower housing area) clean to permit proper air circulation which is essential to engine performance and life. Be certain to remove all grass, dirt and combustible debris from muffler area.

12. STORAGE INSTRUCTIONS (OFF SEASON)

The following steps should be taken to prepare lawn mower for storage.

1. Following the final cut of the season allow the fuel tank to run dry.
2. Clean and lubricate mower thoroughly as described in the lubrication instructions.
3. Refer to engine manual for correct engine storage instructions.
4. Lightly coat mower's cutting blade with chassis grease to prevent rusting.
5. Store mower in a dry, clean area.

NOTE:

• When storing any type of power equipment in an unventilated or material storage shed;
• Care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts.
• Be careful not to bend or kink cables.
• If the starter rope becomes disconnected from rope guide on handle, disconnect and ground the spark plug wire, Depress the blade control handle and pull the starter rope out from engine slowly. Slip the starter rope into the rope guide bolt on handle.

13. TROUBLE SHOOTING

PROBLEM PROBA	ABLE CAUSE CORRECTIVE ACTION
Engine does not start.	Throttle chock not in the correct position for the prevailing conditions.	Move throttle chock to correct position.
	Fuel tank is empty.	Fill tank with fuel: refer to ENGINE OWNERS MANUAL.
	Air cleaner element is dirty.	Clean air cleaner element: refer to ENGINE OWNERS MANUAL.
	Spark plug loose. Tighten spark plug to	25 - 30 Nm.
	Spark plug wire loose or disconnected from plug.	Install spark plug wire on spark plug.
	Spark plug gap is incorrect. Set gap between electrodes at 0.7 to 0.8 mm.
	Spark plug is defective.	Install new, correctly gapped plug: refer to ENGINE OWNERS MANUAL.
	Carburetor is flooded with fuel.	Remove air cleaner element and pull starter rope continuously until carburetor clears itself and install air cleaner element.
	Faulty ignition module. Contact Makita authorized service centre.
Engine difficult to start or loses power.	Dirt, water, or stale fuel tank.	Drain fuel and clean tank. Fill tank with clean, fresh fuel.
	Vent hole in fuel tank cap is plugged.	Clean or replace fuel tank cap.
	Air cleaner element is duty. Clean air cleaner element.
Engine operates erratically.	Spark plug is detective.	Install new, correctly gapped plug: refer to ENGINE OWNERS MANUAL.
	Spark plug gap is incorrect. Set gap between electrodes at 0.7 to 0.8 mm.
	Air cleaner element is dirty.	Clean air cleaner element: refer to ENGINE OWNERS MANUAL.
Engine idles poorly.	Air cleaner element is dirty.	Clean air cleaner element: refer to ENGINE OWNERS MANUAL.
	Air slots in engine shroud are blocked.	Remove debris from shots.
	Cooling fins and air passages under engine blower housing are blocked.	Remove debris from cooling fins and air passages.
Engine skips at high speed.	Gap between electrodes of spark plug is too close.	Set gap between electrodes at 0.7 to 0.8 mm.
Engine overheats.	Cooling air flow is restricted.	Remover any debris from slots in shroud, blower housing, air passages.
	Incorrect spark plug.	Install RJ19LM spark plug and cooling fins on engine.
Mower vibrates abnormally.	Cutting assembly is loose. Tighten blade.
	Cutting assembly is unbalanced. Balance blade.

14. ENVIRONMENT

Should your machine need replacement after extended use, do not put it in the domestic waste but dispose of it in an environmentally safe way.

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):

Designation of Machine: Petrol Lawn Mower

Model No./ Type: PLM4110, PLM4610

Specifications: See "4. Technical Data"

are of series production and

Conforms to the following European Directives:

2006/42/EC, 2004/108/EC, 2000/14/EC

And are manufactured in accordance with the following standards or standardised documents:

EN836/A3, EN ISO14982

The technical documentation is kept by our authorised representative in Europe who is:

Makita International Europe Ltd.,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

The conformity assessment procedure required by

Directive 2000/14/EC was in Accordance with annex VI.

Notified Body:

Measured Sound Power Level: 93.3 dB

Guaranteed Sound Power Level: 96 dB

Model PLM4610

Measured Sound Power Level: 93.6 dB

Guaranteed Sound Power Level: 96 dB

25th November 2009

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

DEUTSCH

1. SYMBOLE AM PRODUKT

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

FRANÇAIS

Descriptif

CE 2006/42, CE 2004/108, CE 2000/14

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Angleterre

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

ITALIANO

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell

Milton Keynes, MK15 8JD, Inghilterra

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Let op: Motor is heet.

5-1 DE INKLAPBARE HANDGREEP MONTEREN

WAARSCHUWING: Benzine is bijzonder

brandbaar.

Michigan Drive, Tongwell,

Milton Keynes, MK15 8JD, England

Richtlijn 2000/14/EC was is Overeenstemming met annex VI.

Officèle instantie:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

PRECAUCION: DESCONECTE LA BUJIA

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Inglaterra

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Descrição geral

2006/42/CE, 2004/108/CE, 2000/14/CE

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Inglaterra

Corpo notifications:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

EAAHNIKA

Fevikn Tepiypao

5-3 XEPOYAI EKKINHTHPA

Metakivnthe to xepoula EKKIVNTnpa aToTov KIVNTpap TpoC Tov odnyo Tou oKoiviou. (Eik. 12, Eik. 13)

5-4 YPOE KONH

AoKnote pia Tneon npoc ta eEw yia va atooovdeoeTOT
moXlo an to nTv oovtwn bao on tnpieng. MetakivnoTe Tov
moXlo npoc ta eptpocn tiow yia va puthetaoTe TO uosc. (Eik. 14 kai dite ra stoixeia 7-9)

6. PYOMIISH TOY KATAAHAOY YPOY

1) ATOOUPETO aopaiOTIKo KOUPTI TOUT OEWVEITNv KATw LAβn, avatpeTe OTNV EIK. 15.
2) AvatpeEe TnV Eik. 16, tAKivnoTe To KATW XepouAI TPOs Ta TAVKAI TPOs TA KATOWUoTTo OTO KAATAALNO uOsc.
Ze autov Tov TUTo Tou XLOOKOTIKOU MTOpeITE VA
ETIIAEETe MEtAu 3 Teoeewv puOImc Tou Uwouc, OTO Uwoc 1, To MEyAUTEpo Uwoc Eiva auto Me TO KATW XepouAI TPOs To EdafoC, To Uwoc 3 Eivai To
Xaunlotepo.
3) Meta tvpueioun Tou katannou uouc,otepewto KATW xepouaiu Ta aopaaiotikau koumtia.

NPOEIADONIOIHs: H apioTepn kai n dEia

THN ENAPEH THE EPIAIAZ SYNTHPHSEI.

1. TPOXOI-AIITAVETa pouAeav eKaTe Tpoxo ToulaixiOTov mia popa ava ETOxH nE AETTIOpeuOTo λδi.
2. KINHTHPA -Akoalouθησε TIC Μδηγες λιπανός του εχερίδiδιού του κινητήρα.
3. XEPISTPHIO AAMAS-ANTAVETa onuia TEPiTPOPnC navw OTO xepouXeipiou Tns lacac KAI OTO KAawio Tou ppevou Toulambdaotov mAp a ava EToxniE AETTtOppeuTo Aabi.To xeipiotnpin Lapaac TpEtTe va AEitoupyei EAEuBepa TpoC oEc TIG dieuUVOEIC.

11. KAOAPI\SMO\S

NPOEXH: Mny KataβpexεT ov kivntnpa με

aTOTELOv Tnpaywyn Oe oipka kai

2006/42/EK, 2004/108/EK, 2000/14/EK

Kai kataaKeuaZovta ouμφwva μe ta Tnapakat W TpOTuTAt

n TUTTOIOINeva Eyypa:

EN836/A3, EN ISO14982

O

diatnpéi ta texvika eyypapa, o otoioeivai:

Makita International Europe Ltd.,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

H diaikiaoa ektiunon oumoppwon nou aataeita

aTó TnV O8nyia 2000/14/EK EKTLEOTNKe OUMPwva μe To

Napaprtma VI.

KoiVToiInEvoc OpyAvioMuo:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

TÜRKÇE

Genel görünüm

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, ingiltere

2000/14/EC sayill Direktif tarafindan istenen uygunluk

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

SVENSKA

8-2 STARTA MOTORN OCH KOPPLA IN KNIVEN

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

DANSK

8-2 START AF MOTOR OG AKTIVERING AF KNIV

11-3 KNIVMONTERINGSMOMENT

2006/42/EF, 2004/108/EF, 2000/14/EF

Og er produceret i overensstemmelse med følgende

standarder aller standardiserede dokumenter:

EN836/A3, EN ISO14982

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

2006/42/EY, 2004/108/EY, 2000/14/EY

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

8-8 POKNY K NASTAVENI VŠKY

2006/42/ES, 2004/108/ES, 2000/14/ES

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

Postup posuzovani shody vyzadovan smernici 2000/14/

ES by v souladu s prilohou VI.

Notifiková organize:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

POLSKI

Michigan, Drive, Tongwell,

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

MAGYAR

2006/42/EK, 2004/108/EK, 2000/14/EK

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Anglia.

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

IopCheHnK o6eMy BnuDy

1. BepxHra pykoTka

2. MewoK DnTpaBbI

3. Ka6eJbHbI 3aXIM

4. Ryokotka ynpablenia octahOBOM

5. Pbyar perynipOBK BbICOTbl

6. RykoTka 6IoknpoBkn

7. Pbyar oboporob Dnuratela

8.OchOBaHne

1. BbICOKaCKOPoCTb

2. PykoTka cTape

3. Cbeua 3aXnraHna

4. Manay ckopocTB

5. HanpaBnaIouaI dIra Tpoca

6. Kpbioka tonnnBHOro 6aka

11.KpbiIkaMacno6aka

IPEDOCTEPEKHEHIE!

YTO6bI o6ecneuHb 630nacHoe nCNoJb3OBAHHe, npOHTte 3To pyKOBoDCTBO nepeH hauaIOM 3KcNpyataun yCTpoiCTBa. HecO6nIOJeHne yKa3aHm MOKeT cTaB npUHOn TJaKeIbIX TpaBM. YDeJIte HEMHO BpeMeH, YTO6bI O3HaKOMITbcra C ra3OHOKocNIkO nepeE ee nCNoJb3OBAHHeM.

1. MAPKINPOBKN HA N3dEJIIN

PpOHTnTe PykoBoDcTBo no 3Kcnnyatau.

He donyckai Te noctopohnx K Mecty pa60T.

UTo6bI n36ExKaTb TpaBM, onepaTop dOnJxeh o6paatb oc6ooe BnHaHne Ha pyKn HOrn.

TOnnBO NERKO BOCNJaMaHReTc, He nOHNOCITE K Hemy orOHb. He DoJIbAaTe TOnnBO Ha pa6oTaIOUe MaunHe.

ToKCHHe npb; He 3KcNpyuTyTe B nomeeHn.

Bo Bpemr o6pa6oTkn r30Ha nCnOJb3yTe 3aunTHbIe Ockn n PpeOxpaHHTbHbIe HayuHNKn.

BoBpempeMOHaN3BNeKeHTeCBeHy 3aKnraHnI3aTEM BbINOnHnTepeMOHT B COOTBcETCBnCpyKOBOCTBOM NO 3KcNpyataun.

Ppeynpeckene: Dbratetb ropn.

OTnyCTIpe pykyc BBIKHQUaTeNEM, T06bl BBKINHOHTb MOTOP.

2. OBsIe IINPABUNA TEXHnKn B63OpACHOCTN

PPEOCTEPEXEHNE: Pn nCIOB3OBAHN

6eH3nHObBx INHCTpyMeHTOB CO6JIIOdaIte OCHOBhie npabunla TexHNKn 6e3ONaCHOCn, BKNIOyanepeuNCHeHHie HIXe, YTO6bl CHN3NTb pNCK NOnyueHn TJeBx TpaBM n/INI NOBpeXdEHNy yCTpoiCTBa. IpoTuTE Bce INHCTpyKcUN Do hauana ekCnnyatauIN 3dJIIna INCOxAHNTe INx dIra NocJeDyUoJero NCNoJIb3OBAHn.

06yuèHne

BHHMaTeIbHo npOHTaTe HnCTpyKcHn. O3HaKoMbTeCb co BcEMn opraHm ynpaBHeHn npabunAm npabunbHOJ 3KcNpyatauN n3dEInr.
He pa3peuaiTe DeTMyIuIaM, He 3HaKOMbIM C daHHbIMn HNCTpykUraMn, NOp3ObaTbcra30HOKoNkoB. B MeCTHom 3aKOHOdaTeJIbCTBe MOryT cyueCTBOBaTb BO3pACThBiE OrpaHnueHnI dIe onepaTopOB.
3anpeaaetc 3KcnnyatnpoBaTb raoHOKocnky,ecnn no6n3OCTn HaxoJATc IIOu (BOCo6eHHocn Detn) JNJXHBOTHie.
IOMHnTE,TO onepaTOp/NoJb3OBaTeJIb Hecet OTBETCTBEHHOCtB 3a IPONCUeCTBnI IN ONaCHbIE CNTyaCIN C DpymN NIOdbMn INN IX CO6CTBEHHOCtBIO.

IodroTOBka

Ha Bpemr CtpnKn Ra3oHa 6paTeIbHO HaedeBaIte npOHyO6yBn IINHHie 6pOKn. He nOp3yItec6 o6OpYIOBAHmE 6ocIKOM NIN B OTKpbITbIX CaHaJInx.
TataelbHO OCMOTPme MeTO, Ie 6yTe NcnoJIb3OBAtbcra ObOpyIOBaHne, n ydaJIte BCE npEaMeTbl, KOTOpbl EMOrT 6bITb OTbpoWeHb MaunHO.
- PPEIOCTEPEXEHNE - BeH3nJerKo BOCIIaMeHReTc.

• XpaHNTe TOnNIBO B IpeHa3HaueHHbIX DnIg 3TOrO KaHNCtpax;
  -3anpaBnTe 6ak TOnbKO BHe NOMEueHn, He Kypnte BO Bpem3anpaBKn;

-ДолваiteToPnIbOdo3aNyckaDbIraTeTna. 3anpeuaetcAChMaTbKpbIuKyToPnIbHOro6aka nINdoIbAtb6eH3nHnpa6oTaUoUemDbIraTeNe nINecINDbIraTeNbropyn;
-ecnB6eH3nH 6bl npoNT,He 3anyckaIte DBnrgTeIb;pepeBnHbTe ra30HOKOcNIky B cTOpOHy OT MeCTa pa3nBa n He co3daBaYte KaKnx-1n60 NCTOCHNKOB INCKp Do nCnpaepHna6eH3nHa;
- HadejHo 3aKpbBaIte KpbIuKN TOnnBHorO 6aka N KaHnCTpbl.

3aMeHHe HeNCpBbIe rnyuNTeJI.
- Ipeep nCnoB3OBAHnem 6o3aTeJbHo OCMOTpnte ne3Bn, 6oNTbI KpePNeHnna ne3Bn u peKyuun y3en Ha npedmet n3Hocau n NobpejdeHn. 3aMeHnTe n3HOweHHbI nII NOpeXJeHHbI Je3Bn N 6oTbIKOMNKeTAMn, YTObI He DoNyCTnTb HapUWeHn 6aJHaHCnPOBKn.

3Kcnnyataun

He BkIIOuAte IBNrAteIb BOrpaHnueHHOM npocTpaHCTBe, Ie BO3MOxHO CKONJIeHne ONaChbIX napOB yrapHorO ra3a.
- Ctpnxkky ra30HOB BbInONHnTe TOnbKO BdHeBHOe Bpemr nn npx XopoWem NCKycCTBeHHOM OCBueeHN.
- ПО BO3MOxHOCtN He IcNoIb3yIe O6OpyIOBaHne Ha MOKpOJ TpaBe.
Co6nJaTe octopoxKHOCTb Ha cKnHOx.
- PepeBnraItec bIarom, He 6eraIte.
- PnncnoB3oBaHHn KoneChbIX poTaIOHOHbIX MaunH CTpnKky CkIOHOB BblIOJHrIe ToJIbKO nonepK, HO H N B KOem Clyuae He BBepx I He BHN3 NO CKIOHy.
Co6nIouaTe oO6yIO octopoXHOCTb,MeHra HappaBneHne DmIXeHnHa CKNoHax.
He BbIOnHnA Te CtpnKky UpeCyp KpyTbIX CKJIOHOB.
CobnIaTe oc6yO octopoxHocb npn DvnKeHH 3aHNm XODOM HIN NOTARBAra3OHOKOcNky K ce6e.
- 063aTeIbHo BbIKIouaIte Je3Bue, ecnra3OHokocnky Heo6xOdmo HaKIOHHTb dIpaHCnOpTnpOBKn NO nobepxHOCTN, OTnUHOIOTpAbbl, IIN6o npr TpaHCnOpTnpOBKe ra3OHOKocnkn KMeCy 3KcIIpyataunu n O6paTHo.
3aπpeuaetc 3KcnnyatnpoBaTb ra30HOKOINky C HeNCnpaBHBIMOrpaxdEHNMAu INI 6e3 3aunTHbIX npncnoc6JIeHn, HAnpImep, DeΦJekTOPOB INI 6yHkepa dna c6opatpaBl.
He meHnTe HAcTpoKn peryIaTopa o6OpOTOB DnRaTeJIe N He 3KcNJIyaTnpuYte DnRaTeJIb cInuKOMdoJro.
- Ppei3anyckOM DnIraTeJIa OTcoeINHITe BCE Ie3BnI MyΦtbl npIBOda.
BknHouaIte DnIraTeIb OCTOpOxHO,B COOTBeTcBm C HNCTpyKUIMM,HON pN3TOM DOJXHbI HAXOINTbcr KaK MOXHO daJIbIe OT Je3Bn.
- Пи зауcke Двигателя He NaKNoHЯTe ra3OHOKOCnIky.
He BKJIOUaIte DBNrAteJIb, CTOI nepeI pa3rpy3OHyIM JeNo6oM.
He nomeuIte pykn nn HOrn noB bpaauounecA DeTaNnn B6n3n Hx. B IIO60 cnTuayn He cTaHOBNTecb nepeD pa3rpy3OHybIM OTBepCTneM.
He noHnMaIte n He nepeHocTe ra3oHOKocNky pa6OtaUzIM DburaTeJem.
BbiknHHTe Dnuratelb n OTCoeDnHtene npoBoD CBeH 3axirahny, y6eNTecb, YTO BCE DnKyuunecyaactn

NIOHOCTbIO OCTaHOBUNICb, ECIN BCTABNEH KJIIOU - N3BNEKITEERO:

-пегд устраненem 3acopobи удаленимпразmetOB,зakynopnbuxxжелб;
-пегд поверков, оочтков илл обслужваиме ra30HOKOCHN;
- nocne yd apa o noctopOHn npedMe. Ocmotpnte ra30HOKOcNIky Ha npedMeT NOBpeXdeHn uyCTpaHNTe HncnpaBHOCtB, npexKe Yem BKIOUaTb n 3KcnJIyATnpoBaTb ra30HOKOcNIky;
- Ecni Naanacb HeHOpMaIbHaB Bn6paunra30HOKOcnKn (HeMeJeHNo npOBepbTe!).

BbIKHOnHTe Dnuratelb n OTCoeDHNHe TnpoBOc CBeu 3axnraHn, y6eNTecb, YTO Bce DnKxUneCe YACTN NOJHOctbIO OCTaHOBNLNCb, eCIN BCTABJIeH KNIou - n3BNeKeNTe erO:

• octabla ra30HOKOcNky 6e3 npncmOTpa;
• nepe3a npabko.
  -Пи ВьК IIOUeHIN DBIraTeJIЯ UMeHbWnte CTeNEHb OTKpbTnA DPOCCeBHOJ 3aCNoHKn;ecNДBURATeNb OCHaUeH OTceuHbIM KJIanaHOM, NO OKOHuaHIn CTpNJKn Ra3OHa BvIKluChte NODaCy TOnJIiBa.
  IcnoB3yTe ra3OHOKOCUky ToJbKO nHa3HaueHIO, dna cTpNkN iNoD6opa TpaBbl. IIO6bIe pyrme cnoc6bI npImeHeHnMOrY 6bITb OnaChbIMn, npNBecTN K NOBpeKdEHNIO MaunHbl.

06cnyxnbAHne n xpaHeHne

Bce raikn, 60ntbI u BNHTbI DOJXHbI 6bITb HaJeKHO 3aTMytbl -3TO o6ecneuT 6e3onachOCTb n pa6oToCnoc6HoCTb.
He xpaHnTe o6OpyIDoBaHne C 6eHNHom B 6aKe B NOMeUeHnAx, Ie npbI MOrY T DOCTNvB OTKpbITOrO rHn Nn NcKp.
- Перед постовский на*xphaешиьnomeшни дайтдвигагелю OCTыт.
YTo6bl yMeHbUHTb onaChocTb noKapa, xpaHnTe DBrarateBb, rnyuHTeBb, OTdeJeHne dJa 6aTapeu N 6eHN BdaNt OT MeCT C TpaBOi, NcIbMaN UIN B6NJ3N C 6OJIbUIM KOnIYeCTBOM CMA3Kn.
- PerinoDnueckn npOBepIte 6yHkep Ira c6oparpaBbHa npEaMeT n3HOca N CHXKeHna 3KcPnyatauOHbIX KaueCTB.
- UTo6bl o6ecneuHb 6e3oNaChOcTb, 3aMeHraTe n3HOWeHHbI e NOBpeXdEHHbI dTeaII.
- Ecnn Tpe6yETc CnITb TOnJIINBO n3 6aKa, 3TO CneIeYET DeNaTb BHe NOMEueHn.

IPEIOCTEPEKHEHHe: He npikacaiTecb K

BpaaHouemcYJe3BnIO.

PNEOCTEPEXEHNE: BbInonHnTe 3anpaBky

TOJIbKO B XopoIoo IPOBEtPnBaEMOM NOMEuEHN NpN OCTaHOBJIeHHOM DvIraTeNe.

3. ONUCAHNE DETAJEI (Pnc. 1 n 2)

Bknoya:

A:KnoudIa CbeH 3axnraHna
B:KlnHДЯМуньИрOBaHnI

4. TEXHnueCKne DAHHbIE

5-1 CbOPKA CKJIaADHOI PYKOKTKN

A) BCTaBbTe HnKHe KOHcI pyKOrTOK B KOpNyc yCTpOuCTBa, pN 3TOM CTOnOpHbIe raKN DoJXHbI 6bITb B Yka3aHHOM NIOxKeHN. (Pnc. 3, Pnc. 4, Pnc. 5, Pnc. 6)
B)ДЯcklaIbIaHnOOCBo6OuTeBepxHne pyKoTKn. CoeINHTe BepxHIOU HIXHIOU pyKoTKn CTOnOpHOI raIKoN.(Pnc.7,Pnc.8)
C) PpONoXnTe Bce Ka6eNn no pyKoRtKam. 3aΦnKcnpyIte nB BOKpyr cpeHne Yactn HxKHX pKoRtOK C NOMOuBIO XOMYTOB, YTObI Ka6eNn pacNoJarAInCb B CTOpOHe OT MaunHbI. B npOTNBHom cnUyae Ka6eNn MOrT 6bITb 3aueMJeHbI npn OTKpbITn/3aKpbITn 3aHNe KpbIuKN IIN HaTaNytbl npn CKNaDbBaHmN BepXHe pyKoRtKn. (Pnc.9)

5-2 CБОРКА БУнKEРА ДЛЯ CBOPA TPABbl

1. YctaHObKa: IIOHMnTE 3aHIO KpbIiKU n NOBcTe 6yHKeP dIg c6op a TpaBb Ha Ocb B 3aHHe yactn ra3OHOKOCJKN. (Pnc. 10, Pnc. 11)
2. ChTne: Bo3bMntecb 3a 3aHIOIO KpbIiKy I NOdHMnITE ee, 3aTeM OTcOeDHHTE 6yHKepe.

5-3 PYKÖRTKA CTAPTEPA

IpepeBEnTe pyKoRtKy cTapTepa C DnBraTeNa HnAnpabNIOuO TpOca. (Pnc. 12, Pnc. 13)

5-4 BbICOTA CPE3AHNIA

Haxmnte no HapabnHIO HApKy, YTo6bI BbICBO6OaNTb pbuar n3 peKn. IpeMeCTne pblur Bnpeq nn Ha3ad dnnpepynnpOBKn BbcOTbl. (Pnc. 14, cm. TaKxe nyHKT 7- 9)

6. PEGYINPOBKA BbICOTbl

1) BbIbePHTe pyKoTky 6nOKnpoBKN, KOTopar nnKcNpyET HxHHO pyKoTky, CM. Pnc. 15.
2) CM.Pnc.16, nepemecntte HxHIOpyKoTky BbepxBn3, yTO6bl yCTaHOBNTb HyXHyO BbICOTy. Ha daHHo ra3OHOKocnke NMeetc 3 noNoKeHHa BbICOTbl: 1-MakcImaJIbHaar BbICOTA HxKHeyn pyKoTKn OT 3eMIn, 3-MNHMaJIbHaar BbICOTA.
3) YcTaHOBInTe HxKHyO BbICOTy, 3aTeM 3aΦnKcnpuYte pyKoRTky pyKoRTkAmN 6NoKnPOBKn.

IPEDOCTEPEXEHNE:JIeBaN npaba

CTOPONbI HIXKHe pyKOaTKn DOJXHbI HAXOuNTbcra Ha OINHaKOBOB BbICOTE.

Cobetblnnaobap60knra3oHOBcMylbHnpOBaHneM

• 06bHoe cpe3aHHe TpaBbIMakcMMyM Ha 2 cm: c 6 do 4 cm.
• NcnoB3ayTe oCtpbHoK.
• He kocnte MOKpyu TpaY.
• YctaHaBnBaIe MaKcMaJIbHbIe O6OpOTbl DBrTaTeJIA.
• Ipepe MeaTecb TolbKO B paOcH Temne.
• PerjraHo OUnaTe KInH dIy MybHropBaHn, BHyTpEHnE NOBepXHOCTN KopnyCa N Je3BVe.

IPEDOCTEPEXEHNE:ToIbko npn

BbIKIIOHcHOM DINrAteJe HEnoDnKHOKe.

1. ПоднIMITE 3aДHIOKpbIshky n CHIMITE 6yHkep dЯ c6opa TpaBbI;
2. HAdBnHbTe KJIIN DJIa MyJbHInpOBAHn Ha OCHOBaHne. 3aΦnKcpyIe KHOJKO JINH DJIa MyJbHInpOBAHn B OTBepCTn OCHOBaHn. (Pnc.17, Pnc.18)
3. Onyctnte 3aHIOKpbIky.

8. INHCTPYKUNI NO 3KCIJYATAUIN

8-1 IEPED Hauajom PABOTbl

O6pa6aBbAte DnBraTeB 6eH3uHOM u MacJOM COJIACHO HCTpyKUIM B OTDeIbHOM pyKOBOdCTBe NO DBnRaTeHIO, KOTOpoe BXoIT B KOMJIeKT DOkUMeHTaCIN, PpNlaraEmoK Ra3oHOKoCNIke. BHMaTeHbHO npOHTaTE HCTpyKUIN.

IPEDOCTEPEXEHNE:BeH3nJIerKo

BOCnJaMaHReTcra.

XpaHnTe TOnnBBO B PpeHa3NaueHHbIX IJIa 3ToIKAHnCTpax.

3anpaBnTe 6ak ToIbKO BHe NOMEueHna, nepeD 3anyckOM DnuratEn, n He KpyTe BO Bpemr 3anpaBKn nn Norpy3OHO-pa3rpy3OHbIX ONepaCn C TOnnnBOM.

3anpeaaetc HmMaTb KpbIuKy TOnnBHOTo 6aka nn DOnnBaTb 6eH3nH npn pa6Oauoem DBrarateNe nIn ecnn DBuratel Toprny.

Ecn 6eH3nH 6bl npOI,He 3anyckaIte DnRaTeJIb; nepeDbHbTe ra3OHOKocNkY B CTOpOHy OT MeCTa pa3nBa H He Co3daBaTe KaKnx-Jn6o NCTOCHNKOB NCKp Do nCnapenHa.

HaJExKHO 3aKpbIbaiTe KpbIuKn TOnNnBHorO 6aKa N KaHnCTpbl.

Ipeen TEM KAK HAKIOHHTb Ra3OHOKOINKy IJI
06cnyxHBnH HOXA INCnBA MacJa, CneTe TOnNBO
n3 6aKa.

8-4 BbIKJIOUeyHNE DBNATEJIa

PENPYPEKDEHNE: Hox npoonkaet

BpaataBcB TeueHHe HeCKoIbKx CeKyHn Nocne BblKnOuyehn DBrarTeTn.

1. Ytoboi octaHOBNTb DnIraTeNb HOK, OTNcyCTnte pyKoRTky OCTaHOBA.
2. OToCoeHnHTe 3a3EmnTe npOBo3axnraHnO T CBeu corIacHO yka3aHnM B pyKOBOCTBE NO 3KcNpyataun DnRaTeJI, YTObI ppeoTbpaNTb CnyauHbI cAmOpOn3BOJhBIn NyCK yCTpoiCTBa.

8-5 METOdbI MYNbHPOBAHnA

OuHCTte ra30H ot Mycopa. Y6eHITcB, yTo Ha ra3oHe HET KAMHei, nAIOK, IPOBOOB HINI DpyrHX INHOPODhIX PpeDMTOB, KOtOpbIe MOyT 6bITb CnyaHNO Bby6poWeHBI RA3OHOKOCnIKoN, npuHnHB TReKeNyTOpABMy ONEpaTOpy NII NOCTOPOHNM JIOdAm, NOBpeNTb IMyueCTBO NII OKpyKaHoune ppeDMtBi. He KocTe MOKpyo TpaBy.ДЯ MaKcMaJIbHOJ 3ΦΦeKTNBHOCTM MylbHnPOBaHnRA He KOCITE MOKpyo TpaBy, NOCKoJIbKy OHa HAJIINAeT Ha DNHISe OCHOBAHN I 3aTPyDnREy MeYbHnPOBaHnE. Cpe3aTe He 6oJee 1/3 BBICOTb TpaBbl. PeKOMeHNDoBAHHa BbICOTA cpe3aHnDAI MaMbHnPOBaHHa COCTabJraet 1/3 BBICOTb TpaBbl. CkopoCTb nepeDbXeHnna CneJyET NODobpaTb TAKIM o6pa3om, YTO6bl Cpe3aHHa TpaBa paBHomepHo pacnPepenlaacb no ra3ohy. EcnI TpaBa rycTaI n cKaShnBaHne 3aTPyDnHo, NcNoJIb3yIte ONDHy n3 MInHMaJIbHbIX CkOpcTey, YTO6bl ObecneHTb KaueCTBeHHoe MylbHnPOBaHnE. Ppr MylbHnPOBaHH

BbICOKo TpaBb MoKeT NOTpe6oBaTbCra KaUNBaHne ra30Ha B Dba 3axOda, OnyCTnB HOK eue Ha 1/3 npn BTOpOM 3axOe. Bo3MOxHO, PnB TOpOM 3axOe HxHNO 6yDet n3MeHNt b CnOCo6 cKaUNBaHnJ.

ДязачнгОТДьнБИХHECKOWEHHbIXyuaCTKOB peKOMeHdyETcR，YTO6blKaJdbI CNeDyUoMnIpoXOD HEMHOrO NepeKpbIbAN ppeIduuyn.Γa3OHOKocNkCy cJeDyET 3KcJIyaTInPoBaTb C MaKcIMaJIbHO OTKpbITOn DPOCCJIbHO 3acNoHKO, YTO6bl DoBHTCBHaHlyUweCpe3AHnI TpaBbI MAKcIMaJIbHO 3ΦΦeKTNBHO MylbHnpOBaHn. OUnsaiTe dHnue OCHOBaHn.

063aTeIbHO OuIaIte DnIe OCHOBaHna Nocne KaJDoTO IcNolb3OBaHna, YTo6bl He DonyCTntb CKoJIeHn TpaBbl. OHa CHNuKaet KauEcTBo MylbHInPOBaHna. MylbHInPOBaHnE JnCTbeB.

MylbHnPOBaHne JNCTbeB TAKKe NOpE3HO DnIra3OHOB.
Pn MylbHnPOBaHnn JNCTbeB y6eDNTecb, YTO OH CyXHe
nIX CNoi Ha ra3OHe He CnNtKom ToIcTbi.
DoKuJaHTecb, NOKa C DepeBBeB ONaYr BCE JNCTb,
yTo6bl Naatb MylbHnPOBaHne.

IPEIOCTEPEXEHNE:HaTKHyBbIMcB Ha

NOCTOPOHHIN PpeDMET, BbIKHNoHTe DnurTaTeJIb.

OTcoeHNHe npOBoD OT CBeu 3aXnraHn, TuaTeNbHO OCMOpTne ra3OHOKOcNky Ha npEmdET nobpeXdHn, n YcTpaHnTE NOBpeXdHn nepeI NOBTOpHbIM 3anyckOM n 3KcNpyataueHn ra3OHOKocNkn. CnIbHa Bn6paunr Ra3OHOKOCNKn BO BpeM pa60Tb IABnETCn pIn3HaKOM IOBpeXdHn. YcTpoiCTBO CneJyET He3aMeDNtEnbHO OCMOTpeTb N OTpeMOHTnpoBaTb.

8-6 BvHKeP IJIa CBOPA TPABbl

OnopoknHe n ouHCTne MeWOk, y6eIHTecb, YTO OH qNCTbI, a erO CETKa BEHTUNIPyETcR. (Pnc. 21)

8-7 OCHOBAHNE

HnKHOIO NOBepxHOCTb OCHOBAHNA Ra3OHOKOcNIKN CNe dyET OHuATb NocJe KaJDo INCNoJIb3OBAHNIA, YTO6bl npedOTbpaTb CKoJIeHne 6pe3KOB TpaBBI, JInCTBeB, rpr3n n T.I. EcnTakoi Mycop 6ydet cAnJIINBaTbC, 3TO npINBeTe K NOBLeHIO pKaBUnHbI N Kopp03N, n MOKeT CHN3NTb KaYeCTBO MyJIbHIpOBaHNIA. DnA OChCTKn OCHOBAHNA HAKNOHnte Ra3OHOKOCUNky n COCKPe6nte rpr3b NODXODaUIM INHCTpyMeHTOM (y6eDITecb, yTO npOBoD 3aJxIRaHNA OTCoEduHeH).

8-8 YKA3AHNIOPEYUNPOBKE BblCOTbl

PNEyPExKdHHe: Hn B Koem cIyue He

BbINOHnTe KaKne-NN6o peYInpOBKn rA3OHOKOJIKN, He BbIKIOUHb PpeBaPteNbHO DnIraTeNb H He OTCOEINHb NPOBOd 3aKnRaHn.

PNEyPExKdHHeN:Peepn3MeHeHneM

BbICOTbCkAsnBaHnBbIKNoHTe Ra3OHOKOcNkU N OTcoEINHTE npOBoD 3axnraHn. Ra3OHOKOcNka OChaSeHa CEHTpaIbHbIM pbuArom peyInpOBKn BbICOTbl, IMeIoUm5 noJoxKeHn.

1. Ppexde Yem N3MeHraTb BbICOTy Cpe3aHnB, BbIKIOHTe ra3OHOKOcNkUy nOTcoEINHInTe npoBOd 3aXnRaHn.

2. LcHT paIbHbI pbIar peryInpOBKn BbcOTbl IMeet 5 pa3JIuHbIX NIOKeHH.

3. YTo6bI N3MeHnTb BbICOTy Cpe3aHn, OTOXMMTe pblu par peryIINPOBKN B CTOpOHy KOJIeCa n IepEMecTNe BBepx INN BHN3 B NOJIOKeHne Tpe6yeMoB BbICOTbl (Pnc. 22). BCE KOJIeCa np cKaUWBaHm OKaKytca Ha oINHaKOBoB BbICOTe.

9. INHCTPyKUIN NO YXOy

CBEA 3AXKΓAHNIA

IcnoB3yIe TObKO opuHnHaJIbHbIe CBeUH 3aKInraHn.
ImaKcImaJIbHO 3ΦΦeKTnBHO pa6oTbI 3aMeHnTe
CbeHu 3aKInraHn Ype3 KaJdbIe 100 yacOB
3KcNJIyatauHn. (CM.PYKOBOCTBO IIO
3KcNJIyATAUuN DBINrATEJIa)

10.ИHCTPYKUNIIO CMA3KE

NPEyPExKdHHeN:EPEDHauJOM

OBCJYKINBAHNAOTCOEINHNTECBEUY 3AKNIGAHN.

1. KOJECA - Cma3bIbIe Te noIuINHnKn KaJdOro KOJeca CBETNbIM MacIOM He pexe OJHO rpa3a B Ce3OH.
2. DBNΓATEЛь - Cnéуnte yka3aHnM no cma3ke, npNBBeDEHHbIM B pyKOBoDCTBE NO 3KcNpyaTaN IN DBNΓaTeJIa.
3. PERYJTOP HOXA - Cma3bBaIte 7apHnpbl Ha pykoTke ynpabNeHnHOXOM N TOpMO3HOI Tpoc CBETlbIM MacnOM He pexe Ondoro pa3a B ce3OH. PeryJTop HOxa DOJxeh CBO6OJHO nepemeUaTbcra B o6oix HnpaBHeHnx.

11. UNCTKA

PENyPExKDEHHe: He Moite DnurteJIb n3

IHaHa. Boda MoKeT noBpeuNT bDnurTeJIb IIN npOnHKHyTB B TOONNBHyO CnCTeMy.

1. PpOtpaIte OCHOBaHnE cyXoTkAhbIO.
2. Помьваite Дише осоваян, Нкюнв ra30HOKOCINKy TaK, УTOбbl CBeHa 3axnIaHЯ 6bla BBepyx.

nopBaH, NOBpeKdE HJN He NoJaETcY NCTKe, eO cJeNyEt 3aMeHHTb. (Pnc.23 dny PLM4110)

11-2 HOX

PNEyPENPEKDEHNE:YTo6bI He Donyctntb

cIyuaHoro nycKa dBnraTeTn, o63aTeNbHO OTcoeINHnIte N 3a3emJIrTe IPOBOd 3axnraHnI, npEKeJe Yem npCTynatb K 06cnyKnbAHIO HOxa. EcnH yXHo B3aTbCra 3a HOx, HadeBaIte TOnCTbIe nepaATKn INN INcNoJIb3yIte O6pe3Kn TkaHN.

HaKIOHnTe ra3OHOKOCnKy, KaYka3aHO B OTdIeNBHom pyKOBoDCTBe No 3KcNpyatauIN DnBraTeJI. N3BNeKeNTe WeCTIrpaHHbI BoTc S WAn6oI, KOToPbIE yDepXnBaHT HOx C aAdantepom Ha KOneHBaJe DnBraTeJI.

OTcoeINHHTe HOK n aadantep OT KOJIeHBaJa.

IPEDOCTEPEXEHNE: IepnoDnueckn

OcMaTpNbBaIte aIaITepeHoxHa npeIme TpeuH, Oc06eHHo B cIyae yIapa o noCTopOHn IpeIme. Ppi Heo6xOIMOCtN 3aMeHIne.

Дя obecneHЯ MaKcHMaJIbHO 3ΦΦeKTINBHO pa6OtBI HOJdoJIXeH 6bITb OCTpblM.ДЯ 3aTOckn HOJa erO Heo6xOIMMO CHrTB N IcNoIb3ObATb ⅢInΦOBaJIbHbI Kpyr IIn6o HAnIIbHnK DJI npIaHnR HOxФOpMbI, KaK MoKHO 6OJee 6N3KO K nepBOHaUaJIbHO. OYeHb BaxHo, YTO6blpeKyuIe Kpa8 6blIN 3aTOueHbI OINHakOBO, YTO6blnpEDOTbPATAH HopuSeHHe 6aHaHCnPOBKn HOxa. HenpaBUNbHna 6aHaHCnPOBka npIBeET K NOBbIeHHo Bn6paCm, YTO cTAHet npUHnOH IOBpeKdEHHa DBIRATEEN I Ra3OHOKOcNIKN. O6ra3aTeJIbHO BbIOJIHnIte 6aHaHCnPOBky HOxa nocJe 3aToCK. BaHaHCnPOBky HOxa MOxHO npOBepNTb C NOMoubIO OTBeTKN, INcNoJIb3yEmO B KauEcTBE OCN. ChImaJIte MetaIIc 6OJee TJAKeIoN CTOpHObl HOxa, IOKa He Do6beteCb paBHOMepHOI 6aHaHCnPOBKn. (Pnc.24)

Ipepe yctaHOBKO HOKa n aanTepa Ha ra3OHOKOJIky CmaXbTe KOleHBAI DnBraTeN I BHyTpEHHe NOBepxHOCTn aanTepa CBetlbIM MacJOM. YcTaHOBtE aanTep Ha KOleHBAI 3Be3DOKo OT DnBraTeN. CM.

Pnc.24.YcTaHOBnTe HOK CTOpOH C HOMePOM DeTaH N OT aAnTepa.YcTaHOBnTe Wai6y Ha HOK N BCTaBBte WeCTnRpaHHbI 6oJI.3aTHe Tbe 6oJIY yCUNHem, Yka3aHHbIM HIXke.

11-3 MOMENT 3ATJKKN HOKA

LeHTpaIbHbI 6oIT cJeIyET 3aTARnBaTb yCUNnem 35-45 Hm. 3To o6ecneuNT 6eONachyIO 3KcNpyatauio

yctpoiCTBa.Heo6xOdmo nepnoDnueeckn npOBeprTa
HaedexHoCTb 3aT8KKn BCEX raeK n 60ntob. Nocne
IINTeJIbHOrO IcNoB3OBAHn,OCo6EHNO B MeCTHOCTx C
IeChauHOI NOBOH, HOX N3HaUNBaETCn TepReT
NepBOHaUaJIbHyO φOpMy. ΕΦΦeKTNBHOCTb pe3Kn
CHJKAeTcR, IN HOX CNeDyET 3aMeHHTb.

B KaueCTBe 3aMeHb IcNoJIb3yIe ToJIbKO HOxN 3aBOdCKOro IpoON3BOJcTBA u peKOMeHIOBaHHbIX MapOK. IVroTOBNTeNb He Hecet OTBeTCTBeHHocTb 3a NOBpeXJeHn, Bbl3BaHHbIe IcNoJIb3OBAHHeM HOKe C HenpaBUNbHO6aJaHCnpOBKn.

ПиЗзаменоха Heo6xOДmo ИСпОьБ3OBaTb Оригнаньные DeТаПс МарКИрOBКон Ha ЛЗВИ (MAKITA 263001433 ДЯ PLM4110; MAKITA 263001451 ДЯ PLM4610) (Инфорmaци O дуг nx Hoxak moKHO ПОЛУЧТь y MeCTHOrO DInIepa ИЛ N B HaWei KOMпАни)

IPEDOCTEPEXEHNE:He npKacaiTecb K

BpaaJIoUeMycrIe3BnIO.

11-4ДВИГATEЛь

HCTpyKuINNo yxOdy 3a DBURAteIeM CM.BOTdEINbHOM pykoBOcTBe No 3KcnnyatauIN DBURATeIa.

3aMeHy Macna BbINONHnTe B COOTBcTCTBnC yKa3aHnMn B OTdJIbHOM pyKOBOcTBe NO 3KcNpyTaUu n DBnRaTeNa, KOTOpOE BXoDnT B KOMnIeKT NocTaBKn BaWero yCTpOInCTBa.

BhImaTeIbHo npOHTaIte HNCTpyKcHn N ToUHO BbIOJIHrIe BCE yKa3aHn.

O6cnyKnBaTe Bo3dyHbI pntcnaCHO yKa3aHnM BOTdEhHom pyKOBoCTBe NO 3KcPnyatauIN dBuratela npi HopMaJIhBix ycNoBnx. Ppi

3KcNpyatauB yCIOBnX CINbHOrO 3aNbJeHn OunuTe uepe3 KaJdbie HeckonbKO YacOB pa60Tbl.

PanaHne MoUHocTn DbVaTeTn N nepeINB TOONBa O6bIyHO yKa3bIbAIO Tn Hc Heo6xOIMOCt b OcNCTKn BO3dUshoro QnJIbTpA.

Yka3aHnno 06cnykBaHnIO BO3dyuHoro 0nIbTpca CM. B OTJeBHom pyKOBOOCTBe NO 3KcNpyatauIN DBnraTeJI, KOTOpoe BXoNT B KOMPJIeKT NOCTaBKn BaJero yctpOCTBa.

Cbevy 3aXnraHn CneDyET OunTaB n peYnpoBaTb 3a3Op 3JeKTPoIOB OOnn pa3 B ce3OH. PeKOMeHnyetc 3aMeHryTb CBevy 3aXnraHn B HauJale KaXdOrO ce3OHa; TIN CBevy N 3a3Op 3JeKTPoIOB CM. B pyKOBoDCTBe NO 3KcNpyatau nn DBuratela.

PerynepHO uCTNTe DBrataTe bTKaHbIO uIN UeTKoI.
NoepKBAITE uCTOTy CNCTEmbIO xNAAxDeHnA
(ObnaCTb KOpNyCa BeHTnTApO) dJI NaHdIeKaUeJ
uPKyIaun BO3dyxa. 3TO oBeCneuH HopMaIbHyO
pa60tBu IN pOdoNT cPOK Cnyk6bl DBrataTeJ.

O6a3aTeNbHO ydaIyIe TpaBy, rpr3b n ropouHm MycOp n3 o6laCTn InyuHTeJI.

12.укАЗИЯ ПО XPAHEHIO (МEXДУ CE3OHAMN)

IgnoiIOROBn Ra3OHOKOcNkK dHnTeJbHOMy XpaHeHIO BbINONHtE CJeDyUoee.

1. Поссе okOHuaHЯ ce3OHa 3aIyCTnTe DBuRatJIb IdoXdntEcB nIoHOB BbIpa6OTKn TOnJIbA.
2. TsqaTeNbHO OUnCTnTE n CMAKbTe ra3OHOKOCnKy B COOTBETCTBnC INHCTpykLmN NO Cma3Ke.

3.Инстукши noхрааненno DBurataTeЯ CM.В pykoBOODCTBE NO 3KcPnLyatauNi DBuratela.
4.ДлЯпгдотьразецня NOВЛЕня рЖавинь CMAXKbTe HOK KOHCNTeHTHOI CMA3KOJ.
5. XpaHnTe ra3oHokocnky B cyxOM uCTO MeCTe.

IPIMEYAHNE:

B cnyucae xpaheHnIIO6Oro O6OpyDObAHnC cnIOBOY yCTaHOBkoB HHePPOBeTpNBaEMOM NOMEUeHNN nnHaCKJaDe MaTePnaJIOB;
- Heo6xOJIMMO pInHbT MepbI dIJI ppeIOBpaueHnKoppo3mN pXaBHybl. HaHeCnTe Ha o6OpydoBaHneCBETJIOe MACNo IIN CNJIKHOBOE MacNo, Oco6eHHoHa Ka6eNi N BCE IOdBHXbIe YactN.
- He nepern6aIte n He nepekpyuBaIte ka6eJn.
- Ecni Tpoc cTapTepa OTOeHNHTc8 OT HnPaBnaHoueHa pykoTKe,OTcoeHNHTe 3a3eMnTe npBOd3axnraHnHaXmnte Ha pykoTKy ynpabJIeHnHOxKomI MeDHeHHo BbITAHTE Tpoc cTapTepa N3 DBnRaTeJHaedeHbTe Tpoc cTapTepa Ha 6oNT HnPaBnaHoueTpoca Ha pykoTKe.

2006/42/EC, 2004/108/EC, 2000/14/EC

IIN3ROTOBJIeHbIB COOTBeTCTBmN CO CneyUIMM

CTaHdApTaMn INH HOpMaTbHBbIMN DOKymeHTaMn: EN836/A3,EN ISO14982

Texnuecka Dokymentau xpaHntc y oPhiuaJbHoro npedctabnteB Ebpone:

Makita International Europe Ltd.,

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

PpoeDpya OueHKn COOTBeTCTBnI CORnaCHO DnpeKTeB

2000/14/EC 6bIa npoBeHa B COOTBcTCTBn C npuJoxKeHem VI.

YyNoHMOUeHHbI OpraH:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

HRVATSKI

Objasnjenje opcenitog prikaza

1. Gornja ručka

2. Vreca za travu

3. Čep ulja

4. Ručka za zaustavljanje

5. Poluga za prerlagodavanje visine

6. Stezaljka kabela

7. Poluga za brzinu motora

8. Platforma

9. Gumb za zakljucavanje

10. RučkaPokretáča

11. Svječica

12. Velika brzina

13. Vodilica za konopac

14. Cep goriva

15. Mala brzina

UPOZORENJE

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Engleska

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Splošna razlaga

3. OPIS DELOV (SI. 1 in 2)

Vkljucno

A: Kligucza vzigalno svecko
B: Nastavek za mulčenje

1. TEHNICNI PODATKI

Model PLM4110 PLM4610
Vrsta motorja	B&S 500 serija, 10T5, družina 8BSXS.1581VG	B&S 625 serija, 122T, družina 8BSXS.1901VG
Samohodna Št. Št.
Delovna prostornina motorja 158 cc 190 cc
Širina rezila	410 mm	460 mm
Prosti tek	2.800/min	2.800/min
Kapaciteta rezervaarja za gorivo	0,8L	1,0L
Prostornina oljega rezervaarja	0,6L	0,6L
Kapaciteta koša za travo	50L	60L
Neto teža	27,5 kg	31,1 kg
Model	PLM4110	PLM4610
Nastavitev višine	20-75 mm, 5 nastavitev	20-75 mm, 5 nastavitev
Hrup v skladu z EN836
Raven zvočnega tlaka (LpA): 82 dB	(A) 83,5 dB (A)
Raven zvočne moči (LwA):	93,3	dB (A)
Negotovost (K):	2,41 dB (A)	2,47 dB (A)
Vibracije v skladu z EN836
Oddajanje vibracij (a):	4,7 m/s2	5,7 m/s2
Negotovost (K):	1,5 m/s2	1,5 m/s2

5. MONTAZA

5-1 MONTAZLOZLJIVEGAROCAJA

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

SLOVENSKY

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Anglicko

Postup posudenia zbody, akoyzadujemeernica 2000/

14/ES bol zrealizovany podla prilohy VI.

Oboznamyony organ:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

2006/42/EC, 2004/108/EC, 2000/14/EC

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Anglia

Procedura de evaluates a conformitài cerutá de Directa

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

LIETUVIJKALBA

Bendrasis aprasymas

1. Virsutine rankena

2. Maišas Žolei

3. Alyvos bako dangtelis

4. Sustabdymo valdymo rankena

5. Aukšćio reguliavimo svirtis

6. Kabelio laikiklis

7. Variklio apsuku svirtis

8. Duqnas

9. Fiksavimo rankenèle

10. Starterio rankena

11. Uždegimo Žvaké

12. Didelis greitis

13. Troso kreiptuvas

14. Degalu bako dangtelis

15. Mažas greitis

ISPEJIMAS

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, England (Anglia)

Atitikties jvertinimo procedura, butina pagal Tarybos

Direktyva 2000/14/EB, atlikta atsižvelgiant LI prieda.

Paskelbtoi jstaiga:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

2006/42/EK, 2004/108/EK, 2000/14/EK

Un ražoti saskaṇā ar šadiem standartiem vai

normativajiem dokumentiem:

LVS EN 836/A3, LVS EN ISO14982

Tehnisko dokumentaciju uztur musu pilnvarots pärstāvis

Eiropa:

Makita International Europe Ltd.

Michigan, Drive, Tongwell

Milton Keynes, MK15 8JD, England

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Uldvaate selgitus

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Inglismaa

Vastavushindamise protseduur direktiivi 2000/14/EU

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

SRPSKI

Michigan, Drive, Tongwell,

Milton Keynes, MK15 8JD, Engleska

Procedura procene uskladenosti koju zahteva Odredba

2000/14/EC bila je u skladu sa aneksom VI.

Obavešena strana:

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

اللهُمِيَل	اللهُمِيَل	اللهُمِيَل
اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل اللهُمِيَل ALHADAM	اللهُمِيَل اللهُمِيَل اللهُمِيَل ALHADAM اللهُمِيَل ALHADAM ALHADAM	اللهُمِيَل اللهُمِيَل ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAH ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAM ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHAD AT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAT ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHAD AP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADIP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAR ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAS ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAC ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAB ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAN ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADUP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADSP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADA ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAG ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADap ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADRAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADCAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADPP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADPA ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAV ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAW ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHADAP ALHAD

.14

1

J) J.12

(0laai)

125 1s1 j j j 10o s1001 1y j y j 1p

Sul 1
Jg j 1
Sla Jg 2
Sla Jg 3
Sla Jg 4
Sla Jg 5
Sla Jg 6
Sla Jg 7
Sla Jg 8
Sla Jg 9
Sla Jg 10
Sla Jg 11
Sla Jg 12
Sla Jg 13
Sla Jg 14
Sla Jg 15

4

1

Sjolalw y. gwh plal 1g0 o25 Sjjduo cdo ly
pla JyLJ5 wogaae:cl jzglkwluy Sswjg
ldilw y Sxaxs Cua
diyoo L Ooai Ile JyI5 L Dnbl
pwwu boklal jkws jollls egw uksr 51
kws rds lkiol jisss wls1g
egw okmny .d5c2jggo jgdnsSyoljRlal
djljxl sGgSklal

aj + 1Sj SjSj - 1

PLM4110 (MAKITA 263001433) 士山子（）PLM4610 (MAKITA 263001451

(1) an = 1 - bn

1

jgga 4-11

a151 11111111111111111111111111111111111111111111111111111111111

13

jgao aaiu 5i0ai j 420000000000000000000000000000

Sul 100000000000000000000000000000000000000000000000000000000

S_ AOB = 12 · OB · AB = 12 × 3 × 4 = 3

( p,q,1) ( q,p,0) ,( 0,q,2) ( 2,q,3) ,( 3,q,4) ( 4,q,5) ,( 5,q,6) ,( 6,q,7)

i

j0j5 1uLd1g 6000 jduy ddy 4

S_ AOB = 12 · OB · AB = 12 × OA × 3

SGLMIMO S|J20.

i j1g.2g 5g=0j1golj1L

1 1

j020 0s j 5 j j j w d g sjj j j j j j j j

1 S 2 3 4 5 6 7 8 9 10

[ \downarrow {d}{2}{13}{d}{2}j\sin {\pi m}\cos {\omega j11},j\delta .{2k} - 1,{2k} - 1,\frac{1}{2}\sin {\omega j1},{2k} - 1,\cos {\omega j} = ]

(24)

j 1

212 = 211

( xt^2 + x) = ( x) f^

1 1

S APQ = S AOB + S_ OBC

1/3 j 25

a1 = 1,a2 = 2,·s

13

ii 与公j

Sn = na1 + ( n - 1) 2 > S_1

jw jw 15 w

oolalol oolol jolalol jololol

jax yjx jyj xjx wiy jax yjx yjx

它恰好 x,y = 1,2,31,( 40,40) ,( 50,50) ,( 60,60)

1 1

动量 = ( a^2 + 1) · S ACD = ( a^2 + 1) · 2S ADB

S_ ADB = 12 · AQ · PD

ai a ai 分母最小值为 k .

1. iS 1. iii j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j j

Lilu 111111111111111111111111111

j 1 j00j j00j j00j 5 4

jla S j yu yu la Jy uuyu yu yu yu yu yu

S1 = 12( a1 + a2 + a3) = 12( a1 + a2 + a3 + a4 + a_5)

joo (9) oo

1,2,3.5,0,( 1,2,3,5) ,0,( 1,2,3,5)

1. Sij 的一个分子数为 ( i j) ( ii j) ( i j) = 12 · Sij · S_ji .

22 × 2 个区域 22 × 3 内接区 22 × 4 个大区 22 × 5 小区

j j j j j j j j j j j j j j j j

101g. 11111111111111111111

3.2g 3.3g 3.4g 3.5g 3.6g

jss s s s s s s s s

(21) Sn = S1

j 1 j j j j j j j j j j

jolldow jol jol jol jol w 510

1 1

iio j i 100

( xt^2 + x) a + bt^2 = 5| 8y| x + 10

（204

CHILDL

j0gS J 1

15

1. Li j1j nda 4y Li Si Jg ggyg y

（20 1

S G = ( S A的) = ( S A + S B)

1

10 10

S OBC = S COD + S BOC - S BOC

S_ OBC = 12 · CO · BC = 12 × CD × 5

S1 = 12 · 2^1 · 3^1 + S2 = 12 · 2^2 · 3^2 + S3 = 12 · 2^3 · 3^3 + S4 = 12 · 2^4 · 3^4

S ADB = S COD + S BDO - S ADB

0 2-8

1

S OBC = S COD + S BOC - S BOC

Tolow

S_ OBC = 12 · CD · BC = ( 2 - 35k) × 2k = ( 2 - 35k) × 2k = ( 2 - 35k) × 2k = ( 2 - 35k) × 2k = ( 2 - 35k) ( 2 - k) × 2k^2

Sn + 1 = nSn + 2

(19) ( k) .d_ij z,2,2 = 2 " = = = 0, = = 0, = q = r

1J 1

j1j jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jia jai ji

S OBC = S COD + S BOC - S BOC

ggo. 4-8

J 1 J 1
J 1 J 1
J 1 J 1
J 1 J 1
J 1 J 1

.5

1-5

aJ5 J 1y L 1024 y 1 y 1y A (6 Jx.5 Jx.4 Jx.3 Jx.) .Ls C B 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y 1y

2-5

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

o1i5 gjw 3-5

1.2000 S 111111111111111111111111111

4-5

152 1y 4y y 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

Lio 6

1
15 1
16 2
13 1
14 1
15 1
16 1
17 1
18 1
19 1
20 1
21 1
22 1
23 1
24 1
25 1

15 123

( x,y) = ( ab + 1,ay)

pL 4 Lg j 20 wS p 1, 200 g o S i g

45

l2 : y = - 1,y2S2( -y2^2 + y2) = y2S_2

S OBC = S COD + S BOC - S BOC

S ACD = S COD + S DCE - S CDE

( 1,2,3) S_ ACD = 12 · CD · AB = 12 × 2t × 5

S_ OBC = 12 · CO · BC = 12 × CD × 5

S OBC = S COD + S BDO - S BOC

26^ = 1,12,12,0,12,0,12,0,12,0,12,0,12,0,12,0,12,0,12,0,12,0,12,0,12,0,12,0,178

oolawolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwolwol

S AOB = S COD + S BOC - S BOC

J 1

Lsi jia jia jia jia jia jia jia jia jia

102 = ( a1 + 2) ( a2 + 3) ( a3 + 4)

a_i S j I, s L u B b A

a1 = 2,a2 = - 4

S = ai = ( 12 ) = 12

在 Rt ABD 中:

000000000000000000000000000000000000000

( x,y) = ( l1 + l2) ( x - y)

L.Si oSli

jgso j1 2j 1j 1j 1j 1j 1j 1j 1j 1j 1j 1j 1j

Lsi oolil

S S = S OQY = 12 + 12

S ACD = S COD + S BDO - S CDA

S AOB = S COD + S BDO - S AOB

15Si 1, jj j j j j j j j j j j j j j j j j j j j j j j j

S_ OBC = 12 · CO · BC = 12 × CD × 5

S1S2 = 12 · 2^2 · 1^2 = 4

a1 = 2;a2 = - 4;a_3 = 8

（）

S OBC = S COD + S_ BOC

p^( 1) a^x = 70 + 20b^y z

45 12 10

S ACD = S COD + S BDO - S CFD

S_ ACD = 12 · AC · PD = 12 × CD × PD = CD.

S_ OBC = 12 · OB · BC = 12 × 2t × 5

a1 = 23,b2 = - 43,c3 = 58,d4 = 79

· = 14 ( + ) ^2 - ( - ) ^2

S AOB = S COD + S_ BOC

s0o 4

PLM4610	PLM4110	الد�
\( 122T \cdot B&S 625 \)\( 1901VG.8BSXS \)	\( 10T5 \cdot B&S 500 \)\( 1581VG.8BSXS \)	\( نعه مورير
\( نعه \)	\( نعه \)	\( نعه مورير
\( نعه \)\( 190 \)	\( نعه \)	\( نعه مورير
\( نعه \)\( 460 \)	\( نعه \)\( 410 \)	\( نعه \)\( بورير
\( 460/2,800 \)	\( نعه \)\( 2,800 \)	\( نعه \)\( بورير
\( نعه \)\( 1.0 \)	\( نعه \)\( 0.8 \)	\( نعه \)\( بورير
\( نعه \)\( 0.6 \)	\( نعه \)\( 0.6 \)	\( نعه \)\( بورير
\( نعه \)\( 60 \)	\( نعه \)\( 50 \)	\( نعه \)\( بورير

( x,y) = ( ab,532) .

1.15 1.17

S OBC = S OAC + S AOB - S AOC

Yc. 14

A. 15

[\therefore \cos \alpha = \frac{2}{5}\;\cos \beta = - \frac{3}{5}\;\cos \gamma = - \frac{4}{5}]

( a + 1) = ( a + 2) = ( a + 3) = ·s = ( a + n)

.8

9

10

slls slls .1

2

250 p

A

S OBC = S COD + S BOC - S BOC

ogaa 2

Sla bI>1 jyj slj jI oIeJol pEa:JHua

1 > lj ≥ j2 < lj 即 lj lj lj lj lj lj lj lj lj lj lj lj lj^ *

a1 = a2 = 2 又 a1 < 0, a2 = - 2

jglgjglgejgljgljglj

a1 = 2,a2 = - 4, b1 = 2,b2 = - 4

oLaiolglaoiSlya1y

i

0j1( 1) ( 0) j_000 + 0( 0) j( 1) ( 1) j( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) .

jglg jglg 1rjdoaui jn jno jnojolao

| x^ | = 1| x| · | r1^2 + r2^2 + r_3^2| ≤ 34| x| ^2

S2j j 150 150 S0g 400

Sisij jz4pdlld

Llaolaljgimss 15 LwJySd

0000000000000000000000000000000

y j 1 y

S_ AOB = 12 · OB · AB = 12 × 3 × 4 = 3

15

2jb0 ÷ 2j5a0 = 01( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 0) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) ( 1) .

( 0,12,0) ,( 0,34,0)

12

S_ OBC = 12 · CO · BC = 12 × CD × 5

S_ OBC = 12 · OB · BC = 12 × CD × 5

( S - S) = ( S1 - S2) + ( S3 - S4)

S OBC = S BOC + S_ CBA

S1 = 12( a1 + a2 + a3) = 12( a1 + a2 + a_3) = + abab - ( a + b) ^2

2g045g>1jyjyjyjyjyjyjyj

5 = 7

LSSJSS

000000000000000000000000000000000000

j00000000000000000000000000000

S ACD = S COD + S BDO - S BOC

1

yodssd slaaia 1

aalb01,aijS,Sla,aa

S OBC = S COD + S BOC - S BOC

S_ AOB = 12 · OB · AB = 12 × OA × 3

在 Rt ABD 中:

12345678901234567890

Lsiololglg 14

1. 1201, 17 mnnnnaa 1, paaal lal gaaai p

S木弟形 COBD = S COD + S BDO = S COD + S_ BDO

= 2a = 33