Z 00166 - Slicer Gourmetmaxx - Free user manual and instructions

Frequently Asked Questions - Z 00166 Gourmetmaxx

USER MANUAL Z 00166 Gourmetmaxx

www.service-shopping.de

Meaning of the symbols in this instruction manual 12
Proper use 12
Safety instructions 12
Risks of injury 12
Risk of electric shock and fire 13
For your health 13
Beware of damage to the device 13
Scope of delivery and device overview 14
Before first use 14
Use 14
Before slicing 15
Slicing 15
After slicing / storage 15
Cleaning 16
Technical data 16
Disposal 16

Dear customer,

We are delighted that you have decided on this slicer.

Please carefully read through the instruction manual prior to using the device for the first time and store the instruction manual in a safe place. This instruction manual is to accompany the device when it is passed on to others. The manufacturer and importer assume no liability in the event the data in this instruction manual have not been observed! As part of ongoing development, we reserve the right to alter products, packaging or enclosed documentation at any time.

If you have any questions, please contact customer service via our website:

www.service-shopping.de

NOTE: The figures in this instruction manual may vary slightly from the original device.

Meaning of the symbols in this instruction manual

All safety notices are marked with this symbol. Please carefully read through and obey the safety notes in order to avoid injury to persons and damage to property.

Tips and recommendations are marked with this symbol.

Suitable for use with food.

Proper use

This device is intended to slice firm foods like bread, semi-hard cheese or sausage. It must not be used to slice very hard foods (e.g. frozen foods, bones) or other substances (e.g. wood).
The device is intended for domestic, not commercial use.
- Only use the device for the intended purpose and only as described in the instruction manual. Any other use is deemed improper.
Defects arising due to improper handling, damage or attempts at repair are excluded from the warranty. This also applies to normal wear and tear.

Safety instructions

Risks of injury

Caution! Danger of suffocation! Children and animals must be kept away from the packaging material.
This device may not be used by children. The device and its connection line must be kept away from children.
This device may be used by persons with impaired physical, sensory or mental abilities or who lack experience and/or knowledge if they are supervised or have been instructed on how to use the device safely and have understood risks arising from using the device.
Children may not play with the device.
If the device is not supervised, before assembling, disassembling or cleaning the device, it must always be disconnected from the power supply.
- Risk of injury associated with sharp blade! Never touch the cutting surface of the cutting blade. Always use the slicing carriage and the finger guard for cutting.
Never attempt to stop the cutting blade from the outside while it is rotating. Always release the switch to stop it.
After deactivation, the drive will continue to run for a short time.

Set the slice thickness to 0 after use.

• Risk of injury due to rotating device parts! Keep clothing, jewellery and hair away from the device.

The connected mains cord may not pose a tripping hazard. Do not allow the cord to hang over the edge of tables or kitchen worktops. Someone could catch him/herself and pull down the device.

Risk of electric shock and fire

Only use the device in enclosed areas.

Always place the device on a dry, level and solid surface with adequate space.
- Keep a sufficient distance from heat sources, e.g. hobs, ovens and gas sources.
Choose a location for setting up the device where there is no risk of the device, the mains cord or the mains plug falling or coming into contact with water or other liquids.
Never immerse the device in water or other liquids and never hold it under running water. If the device does fall in water, immediately disconnect the power supply.

Never touch the cord or plug with wet hands.

• Only connect the device to a properly installed socket with protective earth contacts. The socket must also be easily accessible after the device has been connected. The mains voltage must correspond to the technical data of the device. Only use proper extension cords, whose technical data correspond to those of the device.
  Lay the cord such that it is not crushed or creased and such that it does not come into contact with hot surfaces.

For your health

There may be some production residues stuck to the device. Therefore, clean the device before first use. For hygienic reasons, you should also clean the device if there is leftover food on the cutting blade after use (see chapter "Cleaning").

Beware of damage to the device

Only use the device once it has been properly assembled and does not exhibit any visible damages.
If the device is defective, do not attempt to repair it yourself. In the event of damage, contact the customer service department.

Only use the enclosed accessories from the manufacturer.

Do not allow the device to fall and do not expose it to severe percussions.
Do not subject the device to extreme temperatures, severe changes in temperature, direct sunlight or moisture.
Do not overheat the motor! Let the device cool off after no more than 5 minutes of continuous operation!
Before a storm or if you encounter an error during operation, pull the mains plug out of the socket.

Always pull on the plug itself and never on the cord.

Scope of delivery and device overview

1 Rotary knob for setting the cutting width
2 On/Off switch
3 Safety switch
4 Cutting blade
5 Locking screw for the cutting blade
6 Platform

7 Slicing carriage
8 Finger guard
9 Cord holder on the bottom of the platform (not shown)
10 Guide wall
11 Indicator for cutting width

NOTE: The figures in this instruction manual may vary slightly from the original device.

Before first use

ATTENTION!

Caution! Danger of suffocation! Children and animals must be kept away from the packaging material.

1. Unpack all parts.
2. Make sure that the product contents are complete (see chapter "Product contents and device overview") and check for any damages from transport. Do not use device/ parts if it/they are damaged(!); instead contact customer service.
3. Remove any existing protective foils and stickers from the device.
4. Clean the device (see chapter "Cleaning").

Use

ATTENTION!

• Risk of injury associated with sharp blade! Never touch the cutting surface of the cutting blade. Always use the slicing carriage and the finger guard for cutting.
• Risk of injury due to rotating device parts! Keep clothing, jewellery and hair away from the device.
  Do not overheat the motor! Let the device cool off after no more than 5 minutes of continuous operation!

It is easier to cut cheese, sausage and meat if they have been cooled (not frozen!).
- Allow freshly baked bread to cool off completely before cutting it.

Before slicing

1. Always place the device on a dry, flat, firm and clean surface.
2. Unwind the cord from the cord holders (9).
3. Insert the mains plug in a properly installed socket that is easily accessible.
4. Fold out the platform (6).

1. Mounting the slicing carriage (7) on the platform: Insert the hook on the bottom of the slicing carriage into the two recesses on the outer guide track (indicated by the arrows on the photo). You can now move the slicing carriage along the guide tracks.
2. Removing the slicing carriage: Push the slicing carriage up to the stop point towards the cutting blade and remove it from above.
3. Place the finger guard (8) on the slicing carriage. The high side must be pointing towards the guide wall (10).

1. Use the rotary knob (1) to set the desired cutting width (from 0 to 15mm possible). It is displayed at the top on the device (11).

Slicing

1. Place the food you intend to slice between the finger guard and guide wall (10).
2. Push the safety switch (3) and On/Off switch (2) at the same time to activate the device. The cutting blade will stop when you release the On/Off switch.

3. Push the food you intend to slice gently against the guide wall and use the slicing carriage to slowly push it against the rotating cutting blade.

4. To cut more slices, pull the slicing carriage back and cut the next slice.

After slicing / storage

1. Pull the mains plug out of the socket.
2. Set the cutting width to 0.
3. Push the slicing carriage up to the stop point towards the cutting blade.
4. If there is leftover food on the cutting blade, especially when cutting fatty foods (e.g. sausage, cheese), clean the cutting blade and device (see chapter "Cleaning").

Cleaning

ATTENTION!

• Risk of injury associated with sharp blade! Never touch the cutting surface of the cutting blade; instead always grasp the holder.
  Pull the mains plug out of the socket before you clean the device!
  Danger of electrocution! Never immerse the device in water or other liquids and never hold it under running water. Never touch the device, cord or plug with wet hands.
  Caution! Damage to the device! The device and the accessories are not suitable for the dishwasher!
  The surfaces could be damaged as a result! Do not use any aggressive or abrasive cleaners or cleaning pads.

• Take the finger guard and slicing carriage off of the device (see chapter "Use", section "Before slicing").

1. Turn the locking screw (5) clockwise to loosen the cutting blade.
2. Carefully remove the cutting blade.

3. Wipe off the device and accessories with a damp cloth. You can also wipe off the finger guard, slicing carriage and cutting blade with water and a mild detergent.

4. Dry off all parts.

5. Insert the cutting blade back in the device and tighten the locking screw by turning it counterclockwise.

Technical data

Product number: Z 00166

Model: FS 996

Voltage supply: 220 - 240 V AC, 50 Hz

Output: 100 W

Safety class: II

Slice thickness: 0 - 15 mm

Short-time operation: 5 minutes

Disposal

The packaging material is recyclable. Dispos of the packaging in an environmentally-friendly manner and make it available to the collection service for recyclable materials.

Dispose of the device in an environmentally-friendly manner. Dispose of it at a recycling centre for old electrical and electronic devices.

For more information, please contact the administration in your community.

Customer service / importer:

*) Calls subject to a charge.

All rights reserved.

Contenu

Chere cliente, cher client,

www.service-shopping.de

www.service-shopping.de