Home S7CD - Shredder HAMA - Free user manual and instructions

Frequently Asked Questions - Home S7CD HAMA

USER MANUAL Home S7CD HAMA

1. Extendible arm
2. Shredder head
3. Feed shaft for CDs/DVDs/Blu-ray discs/plastic cards
4. Operating switch
5. Connection line
6. Feed shaft for paper and plastic cards
7. Warning symbols
8. Waste bin

1. Introduction

1.1 Foreword

By purchasing this shredder you have decided in favour of a quality product of Hama, which corresponds to the latest state of development with respect to technology and functional performance.

Please read the information contained in this booklet to familiarise yourself quickly with the unit and to be able to make full use of its functions.

This device is new and has never been used. Any cutting remnants may come from test runs performed for quality assurance during production.

Note in accordance with DIN 66399:

Every person – whether a legal entity or a private individual – is responsible for destroying all confidential personal or sensitive information in order to protect privacy. Whether it is your own private information or that of another party, it is in your own interest to prevent personal information, particularly your own, from falling into the wrong hands. Hama shredders offer help you can count on.

1.2 General information on this device

The Home S7CD shredder shreds paper, staples, magnetic strip and ID chip cards, as well as CDs, DVDs and Blu-ray Discs.

You may not shred: continuous stationery, adhesive labels, film, newsprint, cardboard, paper clips, laminates or plastic (with the exception of the aforementioned items).

1.3 Information on this instruction manual

This instruction manual is part of the shredder Home S7CD (hereinafter referred to as unit) giving you important information on the intended use, safety, connection as well as operation of the unit.

The instruction manual has to be kept near the unit at all times. It has to be read and applied by all persons who use this unit or remove all faults of the unit.

Keep this instruction manual in a safe place and pass it on with the to any future owners.

1.4 Copyright

This piece of documentation is protected by copyright.

Any duplication or reprinting, in whole or in part, and the reproduction of the illustrations even in modified form is only permitted with the written approval of the manufacturer.

1.5 Liability disclaimer

All technical information, data and instructions for the operation contained in this operating manual are in conformity with the last status prior to printing and shall be rendered on the basis of our previous experience and knowledge to the best of our belief.

The manufacturer assumes no liability for damage or injury resulting from failure to observe the instruction manual, use for other than the intended purpose, unprofessional repairs, unauthorised modifications or use of non-approved spare parts.

2. Safety

2.1 Fundamental safety precautions

Observe the following safety instructions to ensure safe handling of the unit:

• Inspect the unit for visible signs of damage before use. Do not use a damaged unit.
• Persons who due to their physical, mental or motor response abilities are unable to operate the unit may only use the unit under supervision or instruction by a responsible person.
• Faulty components may be replaced with original spare parts only. Only original spare parts can guarantee that applicable safety requirements are adhered to.
  Defective parts may only be replaced with original spare parts. Only these parts guarantee that the safety requirements are satisfied. Protect the unit against humidity and penetration of liquids and/or objects. In case of contact with liquids disconnect the unit from the power supply immediately.

DANGER

Electric shock hazard!

Contact with live leads or components poses a risk of serious injury or even death!

Observe the following safety precautions to avoid any electric shock hazard:

Do not use the unit if the mains lead or mains plug are damaged
- On no account should the housing of the unit be opened. Electric shock hazard if live connections are touched and/or the electrical and mechanical configuration is changed.
- Never immerse the unit or the mains plug in water or other liquids.

WARNING

Risk of cuts at the shredding rollers!

Observe the following safety precautions to avoid any injuries:

Do not touch the shredding rollers.

2.2 Warning symbols on the unit

The following warning symbols (7) have been attached to the unit:

General warning symbol

Follow the instructions in the operating instructions.

Only allow children to use the device under supervision.

Do not insert paper clips into the feed shaft.

Do not reach into the feed shaft.

Keep clothing away from feed shaft.

Keep loose jewellery away from the feed shaft.

Keep hair away from feed shaft.

Do not use any aerosol products on or near the device.

WARNING

Risk of injury

Observe the warning symbols in order to prevent injury or damage of the unit.

3. Installation and Assembly

• Remove all packaging materials from the device.
• Do not place the device in a hot, wet or very humid environment.
• Place the device on a level, horizontal surface so that it is stable.
• The socket must be easily accessible so that the power supply can be disconnected quickly in case of an emergency.
  Before you connect the device, compare the connection data for the device (voltage and frequency) on the type plate with that of your mains power supply. This data must match to avoid damage to the device.
• Keep the connection cable away from hot surfaces and sharp edges.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.

4. Handling and operation

4.1 Application instructions

• Observe that the thickness of the paper increases when folded, thus possibly exceeding the maximum page capacity.
  Always wait for a shredding process to finish before starting a new one.
• Never use the unit for longer than 2 minutes in permanent operation.

4.2 Notes on use

4.2.1 Switching on the device

• Slide the operating switch (4) to the "Auto" position. The device is ready for use.

4.2.2 Shred paper

• Insert the paper into the centre of the feed shaft (6). The cutting rollers are switched on automatically.
• Let go of the paper. The device switches back to standby mode after shredding is completed.

NOTE!

• Empty the bin frequently in order to prevent damage to the device.

4.2.3 Shredding CDs, DVDs, BluRay discs and plastic cards

• Slide the operating switch (4) to the "Rev/CD" position. The rollers begin turning continuously and the device is ready for shredding CDs, DVDs, Blu-ray discs and plastic cards.
  To shred CDs, DVDs or Blu-ray discs, pull up the cover and place the materials in the middle of the feed shaft (3).
  To shred plastic cards, place them in the middle of the opening (3) that is labelled "Inlet of credit card".
• Let go of the CD, DVD, Blu-ray disc or plastic card.
• After shredding is complete, slide the operating switch (4) to the "Off" position in order to switch the device off, or slide it to "Auto" to switch to standby mode for paper and plastic card shredding.

4.2.4 Reverse run mode

NOTE!

These modes serve to remove any blockages in the cutter system.

• Slide the operating switch (4) to the "Rev/CD" position. The rollers of the paper cutting system rotate in the opposite direction.
• Slide the operating switch (4) to the "Auto" position.
• Switch approximately three times successively between the positions "Rev/CD" and "Auto".
• Switch off the device and remove the jammed paper or plastic card from the feed shaft (6).

4.2.5 Emptying the bin

• To switch the device off, slide the operating switch (4) to the "Off" position.
• Lift the cutting shredder head off of the waste bin (8).
  Empty the bin.
  Put the shredder head (2) back on the waste bin (8).

4.2.6 Switching off the device

• Slide the operating switch (4) to the "Off" position.

5. Cleaning and Care

Clean the unit with a dry cloth. In case of heavy soiling, the cloth may be moistened a bit.

DANGER

Danger of death due to electrical current

• Remove the mains plug from the electrical socket before cleaning the device.

WARNING

Risk of cutting injury from rollers of the cutting attachment!

Observe the following safety instructions to avoid injury:

Do not touch the cutting rollers

CAUTION!

Moisture can damage the device!

To prevent irreparable damage, make sure that no moisture gets into the device when you clean it.

6. Troubleshooting

Error Possible cause	Solution
The cutting rollers do not turn on briefly ever though you slide the operating switch (4) to „Auto“.	The connection cable (5) is not connected correctly.	Ensure that the mains plug is plugged into the socket.
	No mains power Check your fuse box.
	Device is faulty.	I nform our service department.
If it has not been used for a long time, the device switches off and cannot be switched back on.	The device is overheated	Switch the device off and let it cool off for at least 15 minutes.

7. Technical data

Input voltage 220-240 V~
Mains frequency 50 Hz
Maximum power consumption 160 W
Power consumption (standby) 0,1 W
Dimensions (L x W x H) 16,2 x 28 x 30 cm
Weight (net)	1,8 kg
Weight (gross)	2,0 kg
Paper bin volume	10 liter
CD/DVD/Blu-ray/plastic card bin volume:	0,5 liter
Maximum noise level	72 dB
Max. cutting capacity for paper (70 g/m²)	7 sheets
Max. cutting capacity for paper (80 g/m²)	5 sheets
Max. cutting capacity for CDs/DVDs/ plastic cards/BluRay	1 Stück
Shredding speed	2,8 m/Minute
Pull-in width 220 mm
Feed width for CDs/DVDs/ Blu-ray Discs / plastic cards	125 mm
Cutting size for paper	6
Cutting size for CDs/DVDs/Blu-ray Discs/plastic cards	40 mm
Continuous operating time max. 2 Minutes
Safety level (in keeping with German standard DIN 32757)	1
Protection class (according to DIN 66399)	1
Security levels (according to DIN 66399)	P-1 / T-1 / E-2

• DIN A4 paper; thicker paper, moisture or an improper voltage can negatively impact the performance.

8. Support and contact information

Please contact Hama Product Consulting if you have any questions about this product.

Hotline: [phone] (German/English)

Further support information can be found here:

www.hama.com

Maschinenaufbau

Chere cliente, cher client,

3. Installation/structure

He doTpaHbainTecb kpeKyuIeM BaIkaM.

He xBaTaTb 3a npneMHbI JIoTOK.

Beperebc 3aTnBaHna OdeKdbI B npneMHbI IOTOK.

Beperebc 3aTnBaHna ceNoCn B npneMHbI JNOTOK.

Beperebc 3aTgBaHn BOLOC B npHeMHbI JOTOK.

He noDBepratb yCTpoiCTBO dEiCTBnIO a3pO3oJeN.

INPDEyIpyKJDEHNE

OnachocTB noJyueHn TpaBM!

ДяnpedotBpaueHn TpaBM n nobpejdeHn npnbopa co6IoudaTe npedynpexdauoune cMBOJbl.

3. MoNTaJn IODKJIIOUcHne

UdaJIte ynaKOBOHyMaTePnaJ.
He pa3MeaIte yCTpoIcTBO B MeCTax C BBICOKO TeMnepaTypoI N BnAxxHOCTbIO.
YcTaHOBnTe yCTpOeCTBO Ha poBHyIO, rOpN3oHTaJIbHyIO npOCHyIO NOBepXHOCTb.
Po3eTka 3JekTpOceTn DoJxHa 6bITb JERKO DocTyuHa, C TeM 4To6bl Ka6eIb NHTAHN BcERda MOXHO 6blIO 6bICTpo OTKJIIOHTb OT po3eTKI.
■ Ipeed nodknueHem np6opa K 3neKtpocetn y6eNTecb, YTO OHa COOTBeTCTByET TexHnueckm XapaKTepncTtKam np6opa (cm. 3aBODckyo TaBnUky). HecobJIOHeHne TexHnuecknx XapaKTepncTnk npNBODNT K BbIXOy UcTPONCtBa n3 CTPOr.
He pa3MeaTe Ka6eIb NITaHnpaDc HArpeBaTeNbHbIMnpnbopamn octpbIMN KpOMKaMn.
Ka6eHn He OJnxHbI co3aBaTb NOMexn nepemeueHIO JIOeN.
Ka6eIb He crn6aTb n He 3axImaTb.

Note on environmental protection:

After the implementation of the European Directive 2002/96/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are making an important contribution to protecting our environment.

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.