SteetParty Size 0 Grey - Speaker GEAR4 - Free user manual and instructions
Find the device manual for free SteetParty Size 0 Grey GEAR4 in PDF.
Frequently Asked Questions - SteetParty Size 0 Grey GEAR4
User questions about SteetParty Size 0 Grey GEAR4
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Speaker in PDF format for free! Find your manual SteetParty Size 0 Grey - GEAR4 and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SteetParty Size 0 Grey by GEAR4.
USER MANUAL SteetParty Size 0 Grey GEAR4
Thank you for buying the StreetParty Size 0, super-slim portable speaker for iPod and iPhone. Please read this manual before use and retain it for future reference.
StreetParty Size 0 controls:


Made for iPod touch (1st, 2nd, and 3rd generation), iPod classic, iPod with video, iPod nano (1st, 2nd, 3rd, 4th, and 5th generation), iPod mini and iPod with Click Wheel. Made for iPhone 4, iPhone 3GS, iPhone 3G and iPhone.
Box contents:
Power supply (UK & EU)
- Powered by 4 AAA batteries (not included) or power supply (included)
Line-in port for use with other music players
Charges iPod / iPhone when powered by mains
Ultra-compact design
On/off light indicator
Metal grill for protection
Remote control
Carry case
Auto-Standby
Getting started:
Pull the stand down from the front of the speaker until it reaches the back.
Plug the power cable firstly into the back of the unit and then into the mains supply. Alternatively insert 4 AAA batteries into the back of the speaker.
Slide the ON/OFF switch to ON.
For use with iPod / iPhone:
- Slide the dock out to suit the size of your iPod. Remember to slide the dock back before closing the stand.
- Carefully insert your iPod / iPhone into the dock, it will start charging upon connection.
N.B. Your iPod / iPhone will only charge when the StreetParty Size 0 is plugged in via the power supply.
Auto Standby:
If no music is played for 5 minutes, the StreetParty Size 0 will automatically enter standby mode to save power.
To take the StreetParty Size 0 out of standby mode, press the button on the remote or press the volume controls on the speaker.
To put the StreetParty Size 0 into standby mode manually, press the button on the remote.
For use with other audio devices:
Plug one end of a 3.5mm audio cable (not included) into your MP3 or MP4 player and connect the other end into the AUX in port at the back of the unit.
Select the track and press play on your music source.
N.B. While music is being played through the AUX in port, no sound will be heard from the iPod / iPhone dock.
LED status lights:
Blue:On
Red: Standby
■ Flashing Blue / Red: Mute
To download some of the finest new music around for FREE, visit: www.gear4.com/newmusic
Please ensure that your iPod / iPhone is using the latest software version. To update the software, connect your iPod / iPhone to iTunes. If there is a newer software version available you will be prompted to upgrade.
Copyright © 2010 Disruptive Limited. All rights reserved. Reproduction in part or in whole is prohibited. GEAR4 and StreetParty are registered trade marks of Disruptive Limited. iPhone, iPod, iPod nano, iPod classic and iPod touch are trade marks of Apple Inc., registered in the U.S. and other countries.
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
WARNING
To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
CAUTION
Use of controls or adjustments of performance or procedures other than those specified may result in hazardous radiation exposure.
UNPACKING AND INSTALLATION
Unpack your unit carefully. We recommend that you save the packaging in case you ever need to store your unit. To avoid damage, never place the unit or its batteries near radiators, in front of heating vents, under direct sunlight or near water.
FOR YOUR SAFETY
- When disconnecting the power supply, pull the plug first. Do not pull the cord by itself.
- Never handle the power plug with wet hands, as this could cause fire or electric shock.
- Repairs should be made only by qualified personnel.
- Do not open the housing.
- Do not twist or pinch the power supply cord. If the plug or power supply cord needs to be replaced, ensure that it complies with the manufacturer's recommendation.
- Unplug the unit during lightning storms and when unused for extended periods of time.
DISPOSAL
According to the European Directive 2002 / 96 / EC all electrical and electronic products must be collected separately by a local collection system. Please act according to your local rules and do not dispose of your old products with your normal household waste.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the
presence of uninsulated 'Dangerous Voltage' within the product's enclosure that may be of sufficient magnitude to constitute risk of electric shock to person.

The exclamation point within an equilateral triangle is intended to alert user to the presence of
important operating and maintenance (servicing) instruction in the literature accompanying the appliance.

CAUTION
RISK OF ELECTRIC SHOCK·DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
FCC RULES
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Consult the dealer or an experienced radio / TV technician for help.
Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the device.
Commandes de StreetParty Size 0 :
VOLUME -
VOLUME +
MARCHE/ARRET
COMPARTIMENT DES PILES
⑤ PRISE D'ALIMENTATION EN COURANT CONTINU
⑥ PRISE D'ENTREE HAUT NIVEAU AUX
www.gear4.com/newmusic
RISQUE D'ÉLECTROCUTION - NE PAS OUVRIR

ATTENTION:POUR RÉDUIRE LE RISQUE D'ÉLECTROCUTION, NE PAS RETIRER LE COUVERCLE NI LE FOND. CET APPAREIL NE CONTIENT AUCUNE PIECE RÉPARABLE PAR L'UTILISATEUR. CONSULTER LE PERSONNEL QUALIFIÉ POUR TOUTE RÉPARATION.
RÉGLES DE LA FCC
Bediening StreetParty Size 0:
VOLUME
2 VOLUME +
AAN- / UITSCHAKELAAR
4 BATTERIJVAK
DCIN
AUX LINE IN
Productkenmerken:
www.gear4.com/newmusic
UPPACKING OCH INSTALLATION
AF HENSYN TIL DIN SIKKERHED
GEAR4 One-Year Warranty
Disruptive Limited, who owns the GEAR4 brand, warrants this product to be free from defects in workmanship and materials at the point of sale and that when this product is used in accordance with the instructions for its use it shall continue to be free from defects, for a period of one (1) year from the date of original purchase.
Any damage or defects caused by a failure to follow the instructions which relate to this product or as the result of an accident, abuse, misuse, misapplication, product modification, faulty ancillary equipment, improper voltage or current, lightning or other acts of God, commercial non-home use, normal wear and tear, shipping damage or loss, damage to digital media players or damage caused by service performed by anyone other than Disruptive Limited are expressly excluded from the warranty stated above.
Disruptive Limited will, at its sole election, repair or replace any product that proves to be defective in either or both of workmanship or materials and which is covered by this warranty. If the product is no longer current or is out of stock, at its sole election, Disruptive Limited may replace your product with a similar product. Disruptive Limited's liability is limited to the repair or replacement, of any defective product under warranty and any incidental or consequential damages are expressly excluded to the fullest extent permitted by law. This warranty is valid only in the EU, is not transferable and does not extend to users other than the person who originally purchased the product.
Return Policy / Warranty Service
Warranty claims will only be valid when accompanied with proof of purchase to evidence that the product was purchased from an authorised dealer and that the claim is within allowed period. To make a warranty claim you must first contact Disruptive Limited by email to support@gear4.com stating your name, full postal address, telephone number, date and place of purchase and a detailed description of the problem you are experiencing and don't forget to include the name of the product and its serial number.
If the defect is covered by this warranty then you will be provided with a Return to Manufacturer Authorisation number and instructions for return shipment. Sending the product back to us under this warranty shall be at your expense, and the return MUST be accompanied by the original proof of purchase whilst we highly recommend that you retain a copy of this. Disruptive Limited shall not responsible for lost or damaged products during shipment. Any product returned without the original proof of purchase will be returned without being examined or tested and such return shall be at the customer's expense.
To avoid any additional charges, all returns and exchanges must include the original packing materials, product box, all included accessories which may include, but not necessarily be limited to, power adapters or power cords, connecting cables, remote controls, adapters, inserts cards and instruction manuals. The absence of any of the aforementioned items may mean that you incur a charge for their replacement. Disruptive Limited shall not be liable for any inconvenience, or loss of time, loss of use of the product.
This warranty gives you specific legal rights in addition to the ones afforded you by the laws of your country and nor is this warranty intended nor does it operate to limit such legal rights.
Declaration of Conformity
Product Name: StreetParty Size 0
Model: PG492
Distributor: Disruptive Limited.
Address: Windsor House, Turnpike Road, High Wycombe, Bucks,
HP12 3NR, United Kingdom.
Declare that the product described below is in conformity with the relevant provisions of the following directives and National Laws and Regulations adopting these directives.
The Low Voltage Directive 2006/95/EC
The EMC Directive 2004/108/EEC
The product has been tested and assessed by application of the appropriate standards or specifications. Together with all relevant National Technical Standards and Specifications as applicable.
Standard Year Description
EN 55013: 2006 Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement.
EN 55020: 2002 Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement.
EN61000-3-2: 2006 Limits for harmonic current emissions
EN61000-3-3: 2005 Limitation of voltage changes
Issued in:
High Wycombe, Bucks, United Kingdom
Date: 17/6/10
Authorised Representative: Carl Walastyan Signature:
Position: Commercial Director
PRODUCT NO: PG492
POWER ADAPTER: KSAD0500240W1UV-1
INPUT: 100-240V~50/60Hz 0.4A max
OUTPUT:5.0V=2.4A
New Young Pony Club
© 2010 The Numbers © 2010 The Numbers
For more information visit www.newyoungponyclub.com