CB 964 - Vacuum Cleaner BOMANN - Free user manual and instructions

USER MANUAL CB 964 BOMANN

Close-up of a white BOMAHIV vacuum cleaner with attached hose and power plug (no visible text or symbols on device body)

CB 964

CE

Inhalt

Inhoud • Sommaire • Indice • Índice • Indice • Innhold

Contents • Spis treści • Obsah • Tartalom • Содержание

D Übersicht Bedienelemente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Close-up of a mechanical device with a white paper tag emerging from its side (no visible text or symbols)

D-47906 Kempen/Germany

Close-up of a mechanical component with ventilation grilles and a paper clip (no visible text or symbols)

Close-up of a mechanical component with ventilation grilles and a white paper clip (no visible text or symbols)

Close-up of a mechanical component with ventilation grilles and a paper clip (no visible text or symbols)

Close-up of a mechanical component with ventilation grilles and a white paper clip (no visible text or symbols)

Close-up of a mechanical component with ventilation grilles and a white paper clip (no visible text or symbols)

General Safety Instructions

• Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fi t for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
• To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions".

Special Safety Instructions

• Do not suck up liquids!
• Do not suck up hot ashes or pointed or sharp objects!
• Do not use the appliance in humid rooms!
• Never use without the fi Iter. Check that the fi Iter is inserted correctly!
• hair, clothing and body parts away from the vacuum nozzle during use!
• Keep the vacuum cleaner away from sources of heat like radiators, ovens, etc.!

Overview of the Components

1 Cover of outlet filter
2 Hose connection
3 Carrying handle with button for cable take-up
4 Suction power regulator

5 Button for filter housing
6 Dust container with filter insert
7 Cable
8 On/off switch
9 Secondary air valve

Start-up

1. Insert the vacuum hose in the opening in the dust bag compartment until it locks in mechanically.
2. To release the hose, press the button on the vacuum hose.
3. Keep the button pressed and pull out the hose.
4. Insert the vacuum tube into the handle if required.

Using the Appliance

1. Fit on the accessory.
2. Unwind the necessary length of cable and insert the plug in a duly installed 230V/50Hz protective contact socket.
3. Set the vacuum power with the vacuum power regulator.
4. Vacuum at a steady speed. There is no need to exert pressure.
5. Attention: pay attention to the range that can be covered with the cable length.

Vacuum power regulator

Low vacuum power: For curtains and delicate fabrics Medium vacuum power: For long-pile velour carpets and textile fl ooring High vacuum power: For sturdy rugs and fl oors

Cable winding device

Pull out the cable up to the maximum length indicated with the yellow mark. Never pull the cable out up to the red mark as the cable winding can be damaged. Said damages are not covered by the warranty.

Winding

Press the cable winding button and guide the cable. Hold the cable to avoid wrapping.

Telescopic Suction Tube

1. This makes it possible to adapt the height to your individual body size. Unlock the coupling by turning the wide section of the suction tube to the left.
2. Move the suction tube as required. To lock the coupling, turn the wide suction tube to the right.

Nozzle accessories

Crevice nozzle / brush nozzle: To vacuum corners and slits.

Please note that the crevice/brush nozzle is a „2 in 1“ attachment

GB

GB

Floor nozzle:

For cleaning carpets or smooth surfaces.

In order to facilitate control, the floor nozzle is fitted with rollers and can be adjusted to suit the circumstances.

Carpet: make sure that the brushes on the floor nozzle are deactivated when cleaning carpets. If this is not the case, press the lever on the floor nozzle forwards with your foot.

In order to vacuum even surfaces, for example, press the lever back with your foot. This activates the brushes (you can tell whether this is the case by checking that the brushes are visible on the floor nozzle).

Damper

Open the damper on the hose handle to adjust the airflow or to release objects clinging to the nozzle.

Filter

Your machine has three fi lter systems.

1. Transparent dust collection container

2. The traditional dust bag system has been replaced by a transparent dust collection container in which coarse dirt particles and tiny particles floating in the air are swirled out of the suction air by the high speed of the air current.

3. The purchase of dust bags is no longer necessary.
4. The quantity of dust can be easily read off at any time on the container, which is also very easy to empty.
5. Once the dust level has reached the MAX mark on the dust container, please proceed as follows:

	Press button 5 to open the fi lter hou-sing.
	Remove the dust container.
	Please empty the dust container!To do so, press the button on the dustcontainer. Then close the lid of the dustcontainer again.
	Remove the fi lter cassette and the fi lterfelt. Clean the fi Iters by tapping out thecontents and gentle brushing.In cases of heavy soiling: Wash bothfi Iters in a weak soapy water solution,rinse out and allow to dry.
	Remove the fi lter basket. Clean the fi Iterbasket by tapping at the contents andgentle brushing.In cases of heavy soiling: Wash in aweak soapy water solution, rinse outand allow to dry.Note: Even if the fi Iters may appear tobe clean it is possible that they are stillblocked by fi ne dust.

GB

GB

Motor Protective Filter

Close-up of a mechanical component with ventilation grilles and a white paper clip (no visible text or symbols)

Remove the motor protection fi lter and den exhaust fi lter. Clean the fi lters by tapping out its contents and gentle brushing.

In cases of heavy soiling: Wash both fi Iters in a weak soapy water solution, rinse out and allow to dry.

• Every third time the vacuum cleaner is emptied, or in the case of heavy soiling, please clean the fi Iters by allowing running water to fl ow through the fi Iter felt in the opposite direction to which the air passes through.
• The filter should only be reinserted when they are completely dry!

Important note!

• Cleaning may become necessary after a shorter time, depending on the conditions of use, e.g. when vacuuming fi ne dust.
• If the suction power of your vacuum cleaner diminishes please clean the filters as described.
• If the suction power suddenly diminishes during operation this may be due to the fiters being locked.

Possible cause: As the fi Iters are blocked cooling air for the motor is drawn through the secondary air valve (9). This occurs in order to protect the motor. Switch the vacuum cleaner off. Clean the fi Iters in soapy water as described above.

The vacuum cleaner should only be switched on again when the fi lters are dry.

Cleaning and storage

Cleaning

• Pull the plug out of the socket before cleaning!
- Clean the casing with a dry cloth.
- Clean the motor protection fi lter approximately every 3. time the vacuum cleaner is emptied. Clean the fi lter in hot water without additives. Put it back into place only once it is completely dry.

Storage

• Wind the cable completely.
- Insert the hook of the nozzle on the bottom of the vacuum cleaner into the parking assistance.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories *) ascri- bable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

*) Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge.

Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority.

In many EU countries the disposal of electrical and electronic equipment in the domestic waste is prohibited from August 13, 2005 on.

In Germany from March 23, 2006 on.

Close-up of a mechanical component with ventilation grilles and a paper clip (no visible text or symbols)

Close-up of a mechanical device with a white paper patch and ventilation grille (no visible text or symbols)