SBH 3.0 B1 - Ecouteur SILVERCREST - Free user manual and instructions

USER MANUAL SBH 3.0 B1 SILVERCREST

7.3 Pairing the headset with a mobile phone ............. 20

10. Environmental regulations and disposal

Congratulations! By purchasing the SilverCrest SBH 5.0 A1 Bluetooth

headset, hereinafter referred to as the headset, you have opted for a quality product. Before first using it, familiarise yourself with the way the headset works and read these operating instructions through carefully. Be careful to follow the safety instructions and only use the headset as described in the operating instructions and for the applications given. Keep these operating instructions in a safe place. If you pass the headset on to someone else, make sure to give them all the relevant documents with it. The User’s Manual forms part of this product.SilverCrest SBH 5.0 A1 English - 5

wording and its logo are registered trademarks of Bluetooth SIG, Inc. (Special Interest Group). TARGA GmbH is using these marks under license. The SilverCrest trademark and the SilverCrest brand are the property of their respective owners. USB is a registered trademark. Other names and products may be the trademarks or registered trademarks of their respective owners.

This headset is an information technology device which allows you to make telephone calls using a compatible mobile phone without having to handle it. It is operated using a multi-function button. The adjustable ear hook allows you to wear the headset comfortably on the left or right ear. The headset may only be used for privateSilverCrest SBH 5.0 A1

purposes, not for industrial or commercial ones. The headset is also not suitable for use in tropical climates. The manufacturer is not liable for any damage or interference caused by unauthorised modifications to the headset. Observe the regulations and laws in the country of use.

Remove the headset and all accessories from the packaging. Remove all packaging material and check that all parts are complete and undamaged. If you find anything missing or damaged, please contact the manufacturer.SilverCrest SBH 5.0 A1 English - 7 A Ear hook (1 x fitted, 1 x replacement) B Ear pad - medium (fitted) C SilverCrest Bluetooth

Headset SBH 5.0 A1 D Ear pad – small E Ear pad – large F USB charger cable G These operating instructions (line-art illustration)SilverCrest SBH 5.0 A1

Dimensions (W x H x D) approx. 50 x 22 x 18 mm (without ear hook) Weight approx. 8 g (inc. ear hook) Operating voltage 5 V Electricity consumption max. 300 mA via USB Battery Lithium polymer 85 mAh Talk time up to 6 hours Standby time up to 140 hours Bluetooth

range up to 10 metres Supported profiles HSP, HFP, A2DP , AVRCP Storage temperature -20 °C to +45 °C Operating temperature +5 °C to +35 °C Air humidity (rel. humidity) Max. 85 %SilverCrest SBH 5.0 A1 English - 9 The technical data and design may be changed without prior notice.

5. Safety instructions

Before using this headset for the first time, please read the following instructions carefully and take note of the safety warnings, even if you are familiar with the use of electronic devices. Keep this manual in a safe place for future reference. If you sell the headset or pass it on, always include these instructions. Explanation of the symbols and signal words used in these instructions DANGER! This symbol and the word “Danger” alert you to a potentially dangerous situation. Ignoring it can lead to severe injury or even death.SilverCrest SBH 5.0 A1

WARNING! This symbol and the word “Warning” denote important information required for the safe operation of the product and for the safety of its users. Direct current

DANGER! RF interface Turn the headset off when on board an aircraft, in a hospital, in an operating theatre or in the vicinity of electronic medical equipment. The RF signals may interfere with the functionality of sensitive devices. Keep the headset at least 20 cm (8 inches) away from pacemakers or implanted defibrillators, as the RF signals could interfere with their functionality. The RF signals transmitted can interfere with hearing aids. If wireless mode is switched on, do not place the headset near flammable gases or in a potentially explosive area (e.g. aSilverCrest SBH 5.0 A1 English - 11 paint shop), as the RF signals transmitted could cause explosions or fire. The range of the radio frequency signals depends on environmental conditions. If data is transmitted via a wireless connection, it can also be received by unauthorised parties. TARGA GmbH is not liable for any interference caused to RF or TV signals derived from unauthorised modification to this device. Furthermore, TARGA does not assume any liability if cables or devices are replaced with those that have not been specifically approved by TARGA GmbH. The user is solely responsible and liable for remedying any faults caused by such unauthorised modification of this device or for replacing the device.

DANGER! Risk of explosion! Do not throw the headset into a fire as the built-in battery could explode.SilverCrest SBH 5.0 A1

DANGER! Risk of fire! Do not cover the headset while it is charging. Do not charge the headset inside drawers, cupboards or containers in which the air cannot circulate.

WARNING! Please heed the following: Do not expose the headset to direct heat sources (e.g. radiators). The temperature inside a parked vehicle can exceed +45 °C in the sun. Do not store delicate electronic devices in your vehicle. Do not expose the headset to direct sunlight or bright artificial light. Avoid contact with spraying or dripping water or aggressive fluids and never operate the headset near water. In particular, never submerge the headset, doSilverCrest SBH 5.0 A1 English - 13 not place any items containing liquids, such as drinks or vases, on or near the headset. Do not place naked flames (e.g. burning candles) on or near the headset. Do not introduce foreign bodies into the headset. Never place the headset right next to magnetic fields (e.g. speakers). Do not subject the headset to major temperature fluctuations as this can cause condensation and short- circuiting. If the headset has been exposed to strong temperature fluctuations, wait for it to reach the ambient temperature before switching it on (about 2 hours). Do not expose the headset to excessive shocks and vibrations. Lay any connected cables so they do not present a trip hazard. There is a danger of injury. Always disconnect cables using the plug and not by pulling on the cable itself. Do not place furniture or other heavy objects on the cables and make sure that the cables are not kinked, especially at the plug andSilverCrest SBH 5.0 A1

sockets. Never tie knots in a cable and do not tie them to other cables.

DANGER! Personal safety This headset may be used by children of 8 years or over or by persons with physical, sensory or mental impairments or those with no knowledge or experience providing they are supervised or they have been given instructions on the proper use of the headset and they understand the associated risks. Children must not play with the headset. The product must not be cleaned or maintained by unsupervised children. Keep the packaging materials out of the reach of children. Danger of suffocation!SilverCrest SBH 5.0 A1 English - 15

ARNING! Maintenance / Repairs Repairs are required if this headset has been damaged in any way, for example if the device housing is damaged, if liquids or objects have penetrated the device or if the product has been exposed to rain or moisture. Repairs are also necessary if the product is not working properly or has been dropped. If you notice any smoke, unusual noises or strange smells, power the headset off immediately. Disconnect any charging cables, if connected. If this occurs, the headset should not be used before it has been inspected by authorised service personnel. All repairs must be carried out by qualified service personnel. Do not attempt to open the housing of the headset, this will void your warranty.SilverCrest SBH 5.0 A1

Be careful when using the headset. Listening to high-volume audio for long periods can damage your hearing. Before using the headset, set the volume to the minimum.SilverCrest SBH 5.0 A1 English - 17

These operating instructions have a fold-out cover. Fold- out the cover so you can refer to the relevant controls at any time. 1 Ear hook 5 Increase volume 2 LED 6 Microphone 3 Multi-function button 7 Earpiece 4 Reduce volume 8 Micro USB charging portSilverCrest SBH 5.0 A1

7.1 Charging the battery

Before the first use or when the built-in battery is empty, charge it up as follows: Connect the USB charging cable (F) to the Micro USB charging port (8) and to a free USB port on your computer (which must be switched on) or a USB power adapter (not supplied). The LED (2) lights orange while the battery is charging. When the battery is fully charged, the LED (2) goes green. Do not cover the headset during the charging process, as this could cause it to overheat. A flashing orange LED (2) indicates that the battery is low.SilverCrest SBH 5.0 A1 English - 19

7.2 Powering the headset on/off

Power the headset on by pressing and holding the multi- function button (3) for about 2 seconds. A sequence of beeps sounds, and the headset says: Powering on The LED (2) flashes white to indicate that the headset is scanning for the last Bluetooth

device connected. If a known device is found, the headset says: Connected If the headset has not yet been paired with a mobile phone, this is the first thing to do. The next chapter explains how to pair your mobile phone. Press and hold the multi-function button (3) for about 3 seconds to power the headset off. The headset says: Powering off If an existing connection is also disconnected during powering off, the headset also says: DisconnectedSilverCrest SBH 5.0 A1

The LED (2) goes orange briefly when the headset is powered off.

7.3 Pairing the headset with a mobile

phone Proceed as follows to pair the headset with your mobile phone: Power the headset off. Press and hold the multi-function button (3) for approx. 6 seconds to start pairing mode. Two short beeps sound. The LED (2) flashes quickly in white. The headset is now in scanning mode for about 5 minutes. In this time, you can pair a compatible mobile phone to the headset using the Bluetooth

function. To do this, start scanning for Bluetooth

devices. Now pair your mobile phone to the headset via Bluetooth

. Follow the instructions on the mobile phone. From the list of devices found, select “SBH 5.0SilverCrest SBH 5.0 A1 English - 21 A1” and establish the connection. Once the connection has been established, there are two short beeps and the headset says: Connected If you are prompted for a PIN, enter "0000". While a device is connected, the LED (2) flashes white briefly once about every 10 seconds. If the connection to the mobile phone is lost, the LED (2) flashes white once about every 5 seconds. Bring the mobile phone back into the range of the headset or power it on in order to automatically re- establish the connection to the headset. In some mobile models, you will need to initiate the re-connection from your phone. Only one mobile phone can be actively connected to the headset at the same time. If you wish to connect another mobile phone to the headset, repeat the pairing process as described above.SilverCrest SBH 5.0 A1

7.4 Changing the language

You can change the language of things the headset says. Proceed as follows: Power the headset off. Press and hold the multi-function button (3) for approx. 6 seconds to start pairing mode. Press the Increase volume button (5) to toggle through the languages. You can choose between the following languages:

German Please note that languages are selected in a cyclical menu and can only be changed using the Increase volume button (5). You cannot go backwards by pressing the Reduce volume button (4).SilverCrest SBH 5.0 A1 English - 23 The headset says the language selected. Power the headset off. You can now use the headset with the language you selected.

7.5 Using the headset

You can use the headset comfortably on either your left or right ear using the adjustable ear hook (A).SilverCrest SBH 5.0 A1

The ear pad - medium (B) is fitted to the headset by default. If the ear pad does not fit correctly, you can replace it. Proceed as follows: Carefully pull the ear pad off the earpiece (7) using your fingers. Select the ear pad you want, either small (D) or large (E) and push it onto the earpiece (7) until it slips into the recess.

7.7 Accepting / ending calls

Press the multi-function button (3) briefly to accept a call. The headset signals an incoming call even when your mobile phone is on silent. To end a telephone call, pressSilverCrest SBH 5.0 A1 English - 25 the multi-function button (3) again briefly. There is a short beep as confirmation.

7.8 Rejecting a call

In order to reject an incoming call, press the multi-function button (3) for approx. two seconds until a beep sounds. Once you hear the beep, release the multi-function button (3), as otherwise the headset will power off.

Press the multi-function button (3) twice to redial the last number dialled by your mobile phone.

7.10 Adjusting the volume

You can adjust the volume of the headset using the Reduce volume (4) and Increase volume (5) buttons. Simply press the relevant button briefly. You can also adjust the setting from your mobile phone. Please read the operating instructions of your mobile phone.SilverCrest SBH 5.0 A1

While you are playing music, you can press the buttons as follows: Button / Action Function Quick press of multi

To clean the headset, use a slightly damp cloth. Never use any solvents or cleaners that may damage the plastic. Make sure that no liquid gets into the housing. Remove the ear pad to clean it. Clean the ear pad under running water. Then dry the ear pad carefully. Once the ear pad is completely dry, put it back on the earpiece (7).

9. Storage when not in use

If you do not use the headset for an extended period, you should recharge the battery at regular intervals. This preserves the performance of the battery. Keep the headset and its accessories clean and in a clean, dry, cool place.SilverCrest SBH 5.0 A1

10. Environmental regulations and

disposal information The product bears the symbol of a rubbish bin crossed out. This means it is subject to European Directive 2012/19/EU. All electrical and electronic devices must be disposed of separately from household waste at official disposal centres. For further information, contact your local government, disposal bodies or the shop where you bought the device. The built-in rechargeable battery cannot be removed for disposal. Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to paper recycling centres or public collection points for recycling. Any film or plastic contained in the packaging should be taken to your public collection points for disposal.SilverCrest SBH 5.0 A1 English - 29 Please note the markings on the packaging material when disposing of it, it is labelled with abbreviations (a) and numbers (b), the meanings of which are as follows: 1–7: plastic / 20–22: paper and cardboard / 80-98: composite materials.

11. Conformity notes

This device complies with the basic and other relevant requirements of RE Directive 2014/53/EU and the RoHs Directive 2011/65/EU. The complete EU Declaration of Conformity is available for download from this link: www.targa.de/downloads/conformity/313582.pdfSilverCrest SBH 5.0 A1

The headset does not power on. Recharge the battery. The headset will not charge If you are using a charger (e.g. USB power bank) with automatic charging shut-off, the headset cannot be charged because the charge current is so low. Charge the headset from a USB port on your computer (which must be switched on) or a USB power adapter. No audio over Bluetooth

connection Power the headset on. Try to pair the headset with your mobile phone again. No Bluetooth

connection is established Check whether Bluetooth

functionality is enabled on the mobile phone.SilverCrest SBH 5.0 A1 English - 31 The distance between the headset and the mobile telephone is too great, move them closer. Not all of the functions described are working All the functions described depend on the functionality of the mobile telephone used.

13. Warranty and service information

Warranty of TARGA GmbH This device is sold with three years warranty from the date of purchase. Please keep the original receipt in a safe place as proof of purchase. Before using your product for the first time, please read the enclosed documentation. Should any problems arise which cannot be solved in this way, please call our hotline. Please have the article number and, if available, the serial number to hand for all enquiries. If it is not possible to solve the problem on the phone, our hotline support staff will initiate further servicing procedures depending on theSilverCrest SBH 5.0 A1

fault. Within the warranty period the product will be repaired or replaced free of charge as we deem appropriate. No new warranty period commences if the product is repaired or replaced. Consumables such as batteries, rechargeable batteries and lamps are not covered by the warranty. Your statutory rights towards the seller are not affected or restricted by this warranty.SilverCrest SBH 5.0 A1 English - 33 Service