D701 - Phone MOTOROLA - Free user manual and instructions

USER MANUAL D701 MOTOROLA

D701_lP_Multilingual_over.fm Page 0 Monday, August 27, 2007 4:33 PM

MOTOROLA

Motorola D700 series

Digital Cordless Phone EN

Warning

Use only rechargeable batteries.

Charge the handset for 24 hours before use.

D701_100_IN welcome.1n Page 1 Monday, August 27, 2007 1:21 PM

Welcome...

to your new Motorola D701 Digital Cordless Phone!

All handsets fully cordless for locating anywhere within range.
100 Name and number phonebook
- Copy phonebook entries between other handsets.
- Caller Display shows you who's calling and see details of the last 50 callers in a Calls list.
- Register up to 5 handsets to a single base and register each
handset with up to 4 different bases.
- Make internal calls, transfer external calls, hold 3-way conversation between two internal callers and an external caller.

1. You must subscribe to your network provider's Dialer Display or Call Waiting service for these features to work. A quarterly fee may be payable.
   Please note that this equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency.
   Alternatively, you may find the answer in the Help section at the book of this guide.

This User Guide provides you with all the information you need to get the most from your phone.

Before you make your first call you will need to set up your phone.

Follow the simple instructions in 'Getting Started', on the next few pages.

IMPORTANT

Only use the telephone line card supplied.

This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services.

Got everything?

D701 handset & charger
D701 base
Quick start guide
Battery door

• 2 x AAA NiMH rechargeable batteries
• Mains power adapter for the base
• Main power adapter for the changes
  Telephone line cord

If you have purchased a D701 multiple pack you will also have the following additional items:

D701handset & charger
- 2 x AAA NiMH rechargeable batteries
- Mains power adaptor for the charger

D701_1FU_1N_for_EU.book Page 3 Friday, August 24, 2007 S:19 PM

MOTOROLA

1.	Getting started...	5
	Location...	5
	Setting up...	5
	Connecting up the large base...	5
	Connecting the handset and charger...	5
	Setting up your D701...	6
	Welcome screen...	6
	Set date and time manually...	6
2.	Getting to know your phone...	6
	Overview of your handset...	6
	Handset display...	7
	Overview of the base...	8
	Navigating the menus...	8
3.	Using the phone...	9
	Calls...	9
	Make a call...	9
	Practical...	9
	Dial one touch numbers 1 to 9...	9
	Call from the phonebook...	9
	Call from the calls list...	9
	Answer a call...	9
	Adjust volume...	9
	Mute...	9
	End a call...	9
	Switch handset on/off...	9
	Call a second external number...	9
	Internet...	9
	Call another handset...	9
	Transfer an external call to another handset...	10
	Switch between an internal and external call...	10
	Three-party conference call...	10
	Voicecall...	10
	Dial your network voicemail service...	10
4.	Phonebook...	11
	View and dial phonebook entries...	11
	Eave an entry...	11
	Entering names...	11
	Charater map...	11
	Enter a pause...	11
	View an entry...	11
	Edit an entry...	11
	Delete an entry...	12
	Delete all entries...	12
	Copy phonebook to another handset...	12
	One touch keys...	12
	Dial a one touch number...	12
	Store a phonebook entry as a one touch number...	12
	Delete a one touch number...	12
5.	Caller display and Calls list...	13
	Calls list...	13
	View the calls list...	13

Dial from the calls list	13
Save a number from the calls list to the phonebook	13
Delete a calls list entry	13
Delete entire calls list	13
Radial	13
Rental the last number	13
View and dial a number in the radial list	13
Copy a radial number to the phonebook	13
Delete a radial list entry	13
Delete entire radial list	14
6. Clock & Alarm	14
Set date and time	14
Set alarm	14
Set alarm melody	14
7. Personal settings	15
Handset tone	15
Ring volume	15
Ring midsy	15
Group midsy	15
Key tones on/off	15
First ring	15
Handset number	16
Auto pick up	15
Auto hang up	15
Display language	15
Bassyt mode on/off	16
Exeet	16
Becklight on/off	16
Keypad lock	16
8. Advanced settings	16
Recall time	16
Dial mode	16
Temporarily switch from Pulse to Tone dialling	16
Call barring	16
Switch call barring on/off	17
Set number to be turned	17
Basy call	17
Switch baby call on/off	17
Set the baby call number	17
Dial a baby number	17
Registration	17
Register a handset	17
Select a base	17
Unregister a handset	17
PIN	17
Read	18
Default settings	18
Auto prefix	18
Country	18
Inclusion	18
ECO mode	18

D701_1PU_EN_for_Eu book Page 5 Friday, August 24, 2007 S:19 PM

1. Getting started

WARNING

Do not place your D701 in the bathroom or other humid areas.

Location

You need to place your D701 base within 2 metres of the mains power socket and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your D701 works by sending radio between the handset and base. The strength of the signal depends on where you sit the base. Putting it as high as possible ensures the best signal. HANDSET RANGE

The D/01 has a range of 300 metres outdoors when there is a clear line of sight between the base and handrail. Any obstruction between the base and handrail will reduce the range significantly. With the base indoors and handrail either indoors or outdoors, the range will normally be up to 50 metres. Thick stones walls can severely affect the range.

SIGNAL STRENGTH

The ton on your handed indicates when you are in range. Wher out of range of the basc, the scon shows searing the fleses and the handed gives an out of range warning tone every minute. This tone is repeated until you move back into range

if you are on a call, the line will hang up. Move back within in range. The handshi will automatically re-connected to the base.

Setting up

IMPORTANT

The base station must be plugged into the main power at all sites. Do not connect the telephone to the base station, or the handset is fully charged. Orly use the corner and telephone cables supplied with the product.

WHICH POWER ADAPTOR?

The power adaptor with a clear connector is for the base unit and the power adaptor with a red colour connector is for the charger unit.

MOTOROLA

Connecting up the large base

Plug the large mains power cable into the socket marked: 0 the underside of the base and plug the other end into the mains power wall socket and switch the power on.

Connecting the handset and charger

If you have purchased a multiple pack, this process will need to be carried out for all handsets and chargers:

1. Plug the small main power cable into the socket marked -the underside of the charger.

1. Insert the 2 x AAA NIMH batteries supplied into the handset. Then slide the compartment cover into place.
2. Place the handse on the charger to charge for at least 24 hours.When the handset is fully charged the Fink will indicate that it is fully charged.
3. After 24 hours, plug the telephone line cord from the large base into the telephone wall socket.

Getting started 5

D701_1PUNLforEINook Page 6 Friday, August 24, 2007 5:19 PM

MOTOROLA

BATTERY LOW WARNING

If the icon flashes in the display, you will need to recharge the hardset before you can use it again.

During charging, the will scroll in the display.

BATTERYPERFORMANCE

In June conditions, fully charged penalties should give about 10 hours talk time or 100 hours abandoy time on a single charge.

Note that new batteries do not reach full capacity until they have been in normal use for several days.

To keep your batterkes in the best condition, leave the hands off the base for a few hours at a time.

Running the betteries night down at least once a week will help them get as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the hundreds less talk/standby time. Eventually they will need to be replaced.

After charging your handset for the first time, subsequent charging time is about 6-8 hours a day. Batteries and handset may become warm during charging. This is normal.

Setting up your D701

Welcome screen

1. WE COLO is displayed and scoria in different languages. Press The country name is shown on the display.

2. Scroll (or to your country and press 3 CONFRN is displayed.

The harnipt and base will serel to load the corne settings. The standby screps is then

displayed and your phone is ready to use.

You can still make and receive calls without first selecting your country and network operator, however the Welcome screen will re-appear until you have configured your phone country set

Date and time

Providing you have subscribed to your network's Caller Display service, the date and time is set

If you do not have a Caller Display service you can set the date and time manually.

Set date and time manually

1. Press and scroll to CLOCKLARM. Press Display shows DATE & TIME, then press

2 Enter the date using the formattowW e.g. 4 H or 4 H August 2019

1. Pese 55 and e15e the time using the 24 hour formation, p.g. 14:45 for 2:45pm

2. Press to confirm or to return to standby.

Your D701 is now ready for use.

6 Getting to know your phone

2. Getting to know your phone

Overview of your handset

D701_1FU_1N_for_EU.book Page 7 Friday, August 24, 2007 S:19 PM

A. Farpiess

B Display

See page 7 for an overview of the display icons.

C. Menu key

Enter the main menu. Select the option displayed on screen. Gornim menu option -0% is

displayed on screen.

D. Redial / Scroll right / Clear / Mute

Open the redial list. Scroll to the right.

Delete characters on screen when entering names and numbers.

Mule / unmuule the microphone during a call. Go back to previous menulevel-BACK displayed on screen.

E Call log/Scroll Up/Volume up

Open the call log.

Scroll up through lists and settings.

Increase the carpiece volume during a call.

F Talk/Recall

Make or answer a call

Use recall (R) functions.

G End/Exit/Switchhandsetonioff

End a call.

When in a men, go bark in stardby mogs. Press and hold to switch handset off (when in

standby) or cn.

H Phonebook / Scroll Down / Volume down

Open the phonebook.

Scroll down through tests and menus.

Decrease the carpioc volume

Key p a d

Press to dial number in during a call or in predial

Press and hold a key 1-9 for one touch dialing of pre-set numbers.

J 一 Keypad lock

Press and hold to lock/unlock the keypad.

During a call, press and hold to switch from pulse dialling to tone dialling.

Dala star.

K / Ringer off / Pause

Press and hold to switch handset ringer on or off.

When dialing or storing a number, press and hold to enter a pause (P).

Dial a 0.

L Loudspeaker key

Activate and deactivate the loudspeaker during a call.

WARNING

Handisfree activation can suddenly increase the volume in the carpiere to a very high level. Make

sure the handset is not too close to your ear.

M. Intercom. (at least 2 handsets needed)

Instandby marks, unless in means an internal roll.

During a call, use to transfer an external call to another handset.

MOTOROLA

Handset display

A Display icons

On when the line is in use.
Flashes when there is an incoming call.

Flashes when you have new voicemail messages.

On when you have missed calls and new number(s) in the Calls list.

Phonebook is open.

The alarm clock has been set.

Handfree mode.

Handset ringer is off.

Steady when the handset is registered and within range of the base. Flashes when the

handset is out of range or searching for base.

The approximate power levels of your battery are indicated as below:

Battery is fully charged.

Battery is partially charged.

Battery is running low

Getting to know your phone 7

D701_1PU_1N_for_EJ.hook Page 8 Friday, August 24, 2007 S-19 PM

MOTOROLA

OK displayed

Press the key to select and validate a setting

C▲▼displayed

Press (or to) to scroll through the options in a menu, to open the phonebook or calls list when in standby.

D Back displayed

Press to go back to the previous menu option, to cancel an action or to delete a character.

Overview of the base

Navigating the menus

The basic steps of navigating through the menu and on-screen options.

1. From the standby screen, press

The main menu is opened.

1. Use the 品 or keys to scroll through the menu.

2. Soft key options OK and BACK are displayed. Press to select OK and open a sub-menu or

Valable an option.

Press to select all an action

1. Press to return to standby

If you do not press any button on the handsef for 15 seconds the display will automatically return

to standby. It will also return to standby when the handout is placed on the base or charger

A. Paging key

Paging is a useful way of finding lost handsets.

1. Press on the base

A

1. Press again to cancel the paging call or press any key on the handset to stop the paging call.

8 Getting to know your phone

D701_1FU_1N_for_EU.book Page 9 Friday, August 24, 2007 S:19 PM

3. Using the phone

Calls

Make a call

1. Press 2. Dialt

Prodiect

1. Enter the phone number (maximum 24 digits). If you make a mistake press

2. Press to dial the phone number entered.

Dial one touch numbers 1 to 9

1. Press and hold a key from 0 to 9 until the number is displayed and dialed. If no number is entered, you hear a o h o

Call from the phonebook

1. Press 1. The first only in the phonebook is displayed.

2. Soro 3 to the unity y 1. Prog 4 to find the numbers

TIP

Instead of scrolling to browse the phonebook entries, press the numeric key corresponding to the

first letter of the entry you wish to locate. For example, pressing 2 will show the entire page with A. Pressing (2) again will show the entries starting with B. etc.

Call from the calls list

NOTE

You need to subscribe to your network's Caller Line Identification service to be able to see the caller's number in the calls list. See "Calls list" on page 13 for more details.

1. Press to enter SLLL menu. You have the options in accessCALLIST or ANEW VACHME.

Press to enter CALL LIST. The first entry in the call list is displayed.

1. Scroll to the entry you want.

2. Press to dial the number.

Answer a call

1. When the phone rings and flashes in the display, press or press to answer the call

WARNING

When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your

hearing . Handstree activation can suddenly increase the volume in the earpiece to a very highlevel . Make sure the handset is not too close to your ear .

NOTE

If you have subscribed to your Network's Caller Identity service and assigned a VIP Group to the caller's number, the caller's details are displayed before the phone starts ringing (see "Store an entity" on page 11 and "Group melody" on page 15). You can set your phone to give the default voice. The caller will be able to access the caller's identity displayed, the assigned ringsigns will start. See "First ring" on page 15.

MOTOROLA

TIP

If Auto Pick up mode (see page 15) is on, simply lift up the handset from its base to answer the

NO

An inopening call has priority over other purposes. Wherewever there is an inoposing

operations in progress such as phone settings, menu navigation, etc. will be ended

Adjust volume

1. During a call, press 品 or 0 to adjust the earpiece or loudspeaker volume.

The level is shown in the handset display.

Muto

Mute the microphone so that you can talk to someone else in the room without your caller hearing

1.During a call,press

The microsphere is muled.

1. Press again to turn the microphone back on.

End a call

1.Press

After you hang up, the duration of your call is displayed for 5 seconds.

NOTE

If auto hang-up is on (see page 15) simply replace the handset on the base to end the call. The

default setting is ON

Switch handset on/off

1. Press and hold until the handset switches off.

2. Press and hold again to switch the handset back on.

Call a second external number

Put an external caller on hold to make a second external call. You can then switch between both callers or hold a 3-way conference card.

1. During your call, press to INTENDCALL.

2. Press

DisplayshowALLNO

1. Enter the second number.

2. When your second caller answers, press to open the option menu

CONFERENCE - press to initiate a 3-way with an external caller and internal caller.

SWITCH CALLS - press to switch between the two callers.

1. Press to hang up

Intercom

This feature is only available when there are at least 2 registered handsets. It allows you to make

Using the phone 8

D701_1P1_EN_for_EN book Page 10 Friday, August 24, 2007 5:19 PM

MOTOROLA

Call another handset

1. Press

If you have two hands, the other hand is called automatically.

If more than two handos are registered to the base, their numbers are displayed, e.g. 246. Enter the number of the handed you want to call or press to ring all handeds.

2 Press to heng up.

NOTE

IF the handse does not belong to D709710 range, this function may not be available.

Transfer an external call to another handset

uring an external call, press

Your callar is put on hold.

1. Enter the number of the handset you want to call or press to ring all handsets
   If there are only two hands, the other hands is called automatically.
2. When the other handset answers, announce the caller then press to transfer the call. If the other handset does not answer, press to talk to your caller again.

Switch between an internal and external call

uring an external call, press
Your caller is put on hold.
2. Enter the number of the handset you want to call or press to ring all handsets
- if there are only two hands, the other handser is called automatically.
3. When the other handed answers you can speak privately to your internal caller. 4. Press OK to switch between both callers.
Press (to hang up

Three-party conference call

1. During any extreme cell processes

Your letter is not on any account.
2. Enter the number of the handset you want to call or press to ring all handsets
If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the call then press and hold to connect both
Caill. If the other handset does not answer, press to talk to your caller again.

Voic

If you have subscribed to your network's voicemail service (if available), your D701 displays 0.0

when you have a new message. Depending on your country and network services, the voicemail number may be set to 10 or more depending on your needs (see the 2) better.

10

NOTE The voicall mumber is pre-stored only if the country where the phone was purchased offers a voicall service. If the voicall number is not pre-stored you can add a number, or overwrite the existing stored number. See page 12.

Dial your network voicemail service

Pee and hold :

1

your Mssage

10 Using the phone

D701_1P1_EN_for_EN book Page 1 Friday, August 24, 2007 5:19 PM

MOTOROLA

4. Phonebook

The D701 handset phonebook can store up to 100 names and numbers

NOTE

Numbers can be up to 24 digits long and names up to 12 characters long. Entries are stored in alphabetical order.

View and dial phonebook entries

1. Press 4. Display shows the first entry

2. Scrol 2 or 1 to the entery you want

Or

To search alphabetically press , then press the key with the first letter of the name, e.g.

the same begins with N, press 5) twice.

The display shows the first only beginning with N. If required, press 2 or 3 to scroll to the next row.

1. Press to dial the entry displayed.

Store an entry

1. Press 念 PHONESCOX is displayed.

2. Press NEWMENTRIs displayed.

3. Press ENTER HANeV e displayed.

4. Enter a name and press

5. Enter a number, Press to save. Press to select no GROUP, GROUP A, B or C and press to confirm.

6. Press to return to standby.

NOTE

You can assign individual contacts to specific groups of your choice. For example, Group A contains phone numbers of all your co-workers. You can also assign a specific ring melody to that

group like "Group theory" on Page 10. You can benefit from this feature only if you have subscribed to Dialer Line Identification service from your network provider. If it is the case, every user will be able to use the dialer line identification service.

NOTE

Cancel storing an entry by pressing at any time during the process.

Entering names

Use the alphanumeric keyspad to enter names in the phonebook.

For instance to enter the name Paul

P Press 7 once

1

m = 311 ;

To enter a space press

Press to delete a character or press and hold to delete all characters.

Character map

Use the keypad to enter names and characters.

T

1

A B C 2

1

② 0

1. H 1

(5)

（2）

m = 311 ;

7 P C R S T

(9) W X Y 2

1. 2018年，中国共产党成立

Enter a pause

If your D701 is connected to a switchboard, you may need to enter a pause in a stored number.

This gives the switchboard time to get an outsize line. A Pause is normally stored after the switchboard access code (e.g. 9).

1. When storing a number, press and hold until the display shows P. You can then continue storing the phone number.

View an entry

instandby
1.BoRs（
2. Ener the first letter of the rane to reaeh xhe pntical hne raill or in the exord
entry, The value is displayed.
3. Press to display the number. If there are more than 12 digits, press again to see the
1.
-1
During a call:
1. Press twice to open the phonebook menu
2. Enter the first letter of the name you want then scroll or if necessary to the exact name.
Press to display the number. If there are more than 12 digits, press again to see the rest of the number.
3. Press to cancel the phonebook display.
4. Press again to end the call.

Phonebook 11

D701_INL_EN_for_EJ.hook Page 12 Friday, August 24, 2007 5:19 PM

MOTOROLA

Edit an entry

1. Press (2)
2. Copy or to the entry you want to edit and press. EDIT ENTRY is displayed. Press grain
3. Edit the name and press to confirm. Use to delete characters.
4. Press and edit the number
5. Press to confirm.
6. Scroll or to select NO GROUP, GROUP A, B or C and press to confirm.
7. Press to return to standby.

Delete an entry

1. Press 0.
   2 Scroll to the entire your want to delete.
   3.Serli 90 DELEEMIK and prese 4. Rreakshoun (C) P
2. Display SNOW COFFIN? PRES

Delete all entries

1. Press twice.
2. Scroll to DELETE ALL and press
3. Display shows COFFAM' Press
4. Press to return to standby.

Copy phonebook to another handset

1. Press twice
   2 Scroll to Pto TransFER and prcess

2. Scroll or to the number of the handset you want the phonebook copied to. Press

3. Press to return to standby.

NOTE

If an entry with the same name and number is already stored in the receiving handset, it will not be coded across.

One touch keys

The keys 1 to 2 enable one touch dialing of entries stored in the phonebook.

Dial a one touch number

1. Press and hold a number key 1 to 2.
   The number is disclosed and dialg.
2. Press to cancel the dialing and return to standby.
3. Press and hold a number key 1 to 2.
   The number is disclosed and dialg.
4. Press to cancel the dialing and return to standby.

Store a phonebook entry as a one touch number

1. Press twice
2. Scroll to DRECT MEN and press
3. Press or to select Key 1-9 and press . The current entry, if any, is displayed.
4. Press again to open the options menu.

5. Press to add an entry from the phonabook.

6. Scrol 2 or 1 to the enry you want. Press to confirm or to return to standby.

Delete a one touch number

1. Press twice then scroll 2 or to PECT VEN and press
2. Scroll or to select NE1:
3. Press to display the current entry. Press again to open the options menu.
4. Scroll to DELETE and press
5. Display shows CONFIRM? Press
6. Press to return to standby

One touch keys

The keys 1 to 2 enable one touch dialing of entries stored in the phonebook.

Dial a one touch number

12 Phonebook

D701_INU_INfor EU book Page 13 Friday, August 24, 2007 5:19 PM

5. Caller display and Calls list

If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is available, the caller will be displayed together with the date and time of the call (if provided by the network).

NOTE

If the caller's number is stored in your phonebook along with a name, the name will also be displayed.

• If the telephone number is not available for incoming calls, the handset will display AVAILABLE information about incoming calls will vary by country and network operator. Some operators may charge a subscription for their Caller Line Identification service.

Calls list

The calls list contains details of missed and received call. Details include the date and time of the call. Entries are displayed in chronological order with the most recent call at the top of the list.

NOTE

When the calls list is full, a new call replaces the oldest in the list.

The received and missed calls log holds details of up to 50 calls. If you see a call that one cell for the same number and the

If you receive more than one call from the same number, only the most recent call is kept in the calls list.

When you have missed calls (incoring calls that you haven't answered) the will be displayed in the display on all handsets registered to the base.

If one handset is used to view the calls log, the icon on the other handsets continue to flash (Multipack user only).

View the calls list

1. Press 念 to enter CALL LOG option menu, then press 念 to enter CALL LIST - The most recent number or name 3 stored in the phonebook is displayed. New osis are

2. Scroll or through the calls log.

At the end of the log, you will hear a beep.

Press to see the number. If the number has more than 12 digits, press to see the rest of the number.

1. Press to return to standby

In store flashing once all new calls have been viewed.

Dial from the calls list

1. Press to enter the CALL LOG option menu, then press to enter CALL LIST. The most recent call is displayed.

2. Scroll (A) or (B) to the entry you want.

3. Press or .to die

Save a number from the calls list to the phonebook

1. Press then The most recent call is displayed.

2. Scroll or to the number you want.

3. Press SAVE NUMBER is displayed.

4. Press ENTER: ENSTRANS is displayed. Use the keypad to enter the name. 5. Press Enter the number to disasigned, the user canption cell the sun

must press to save the number (even if has not been edited).

1. Press or to select NC GROUP, GRCUP A, B or C and press to confirm.

2. Press to confirm.

3. Press to return to standby.

Delete a calls list entry

1. Press then The most recent call is displayed

2. Scroll or to the number you want 3. Page for then small on SEET and on

3. Display above (CBBN) Error in the form

4. Pass (to return to school)

Prrnre rnrnnrnnnne

Deleterentirecalislist 1

1. Press # . The #h #e#d can is displayed

2. Dispaly shows CONBRR Press to contorm Press +to return to stanyby

1

Redial

The D701 lets you radial any of the last 10 numbers called Numbers can be up to 24 digits long.

Redial the last number

1. Press The last number dialled is displayed.

If the number has more than 12 digits, the display shows and the cursor blinks. Press OK to display the text. If the number is stored in the Filesystem, the same is displayed on all

1. Press to di

View and dial a number in the radial list.

1.PressThe first rower dial is displayed

If required, scroll or to display the number you want.

1. Press to dial the number

Copy a radial number to the phonebook.

1. Press and scroll ±b or 0 to the entry you want.

2. Press

3. Display shows SAVE NUMBER Press

4. Enter the name and press (+).

5. Edit the number required and press OK.

6. Pee 867 to selignt wou OURUO CHOUU a, b cr c and pree 5 to cirrr

7. Ptees (in return is statiny)

Delete a radial list entry

1. Press OK, Scroll or 10 to display the number you want. 2. Press OK and press OK to print the paper on your computer.

2. Prrnne nnnnne

3. Dispaly shows COMHRY Press to contorm then to return to stancby

D701_1P1_EN_for_EN book Page 14 Friday, August 24, 2007 5:19 PM

MOTOROLA

Delete entire radial list

1. Press then press
2. Scroll to DELETE ALL and press
3. Display show CONFRM: Press to confirm. Press to return to standby.

6. Clock & Alarm

If you subscribe to your network's Caller Identification service, the time on your D701 may be set automatically each time you receive a call, depending on your network provider:

You can also set or adjust the time using the Clock & Alarm menu.

Set date and time

1. Press and scroll to CLOCKLYARv. Press Display shows DATE & TIME, then press
2. Enter the date using the format COVN e.g. 10 for 4th August
   3.Pies and enter the
   e.g. 14.45 for 2.43psi
3. Press to return to standby

NOTE

Set alarm

1. Press to DOCKALARY end press
2. Scroll to SET ALARM and press
3. Scroll or to OFF, ON, ORCE or ON/DAY and press
4. If you select ON/OFF or ON/DAILY enter the time using the 24 hour format HH-VM e g 14:45 for
5. Press to return to standby. When the alarm goes off, press any key to stop the ring.
   NOTE

Once the alarm is set to on, the non is displayed.

The alarm will ring at the medium level. ALARM ON and the flash on the display

Set alarm melody

There are three alarm rings.
1. Press and scroll to CLOSSLARY
Press
2. Scroll to ALARM TONE and press.
- Moldeies are plesed

14Clock & Alarm

D701_1PU_1N_for_EU. book Page 15 Friday, August 24, 2007 5:19 PM

MOTOROLA

7. Personal settings

Handset tones

WARNING

When the phone is ringing, avoid holding the espioe too close to your ear as it may damage your hearing.

Ring volume

Choose from: Ringer Off, Low, Medium, High, Boost and Progressive (increasing ng volume).

NOTE The default settings

1. Press scrolI to PERSONAL SET and press

2. FANDBET TONE is displayed. Press

3. RING VOLUME is displayed. Press

4. Scroll or to adjust the ringer volume level

5. Press to save the settings

A. Press + to 86

Ring melody

Choose from 10 ringer melodies.

1. Press scroll to PERSONAL SET and press

2. HANDSETTONE is displayed. Press and scroll to RING WELLCY. Press

3. Press or to select the ringtone.

A sample of the ringona is

1. Press + to return to standby.

Group melody

To benefit from this feature, you must subscribe to the Calier Line Identification Service. This menu enables you to select and set the meodies to be played when there is an external incoming call from a contact whose name is stored in your phonebook and is part of a group. You can associate 1 ring meody to each group. There are three phonebook groups (Group A, B, C) available for you to organize your contacts. Each group can be assigned a unique meody.

1. Press, scroll to PERSONAL SET and press

2. HANDSETTONE is displayed Press and scroll to GROUP VELCODY. Press

3. Scrol1 or 1 to selcct: OROUP A, BOR C, then press

4. Press 2 or to select the ringtone you want for the group and press (3) 5. Press to return to singing

Key torace off

Key notes on

1. Press to screen to PERSONAL SET and press

2. HANDSET TONE is displayed. Press ( ) and scroll ( ) to KEY TONE, Press ( )

3. Scroll (2) or (1) to select OK or OFF.

4. Press to confirm.

5. Press to return to standby

First ring

Your D701 will automatically detect the Casier Identification (Subscription dependent). If you do not have a D701, the default identification is displayed you can manually set FIRST RING to OFF. The default setting is ON.

1. Press, scroll to PERSONAL SET and press

2. HANDSET TOE is displayed. Press end scroll to FIRST RING. Press

3. Scroll or to select on or off.

4. Press to return to staply

Handset name

Personalise your handset, with a name or location for example Peter or Bedroom. Maximum 10

1. Press, scroll to PERSONAL SET and press

2. Scroll to HANDSET NAME and press The current name is displayed

3. Press to delete the current name.

4. Enter the name you want - maximum 10 characters and press OK to save.

5. Poes

6. 1000

Auto pick up

With Auto pick up switched on, you can answer a call just by filling the handset off the base or charger. It switched off, you will have to press *) to answer a call. The default setting is On.

1. Press , scroll to PERSONAL SET and press

2. Scroll to AutoPick UP Press

3. Scroll or to select ON or OFF

4. Pigs 60

5. Plesse 3 to return is stany.

Auto hang up

With Auto hang up switched on, you can end a call just by replacing the handset on the base or charger. If switched off, you have to press " 念 to hang up. The default setting is On.

1. Press , scroll to PERSONAL SET and press

2. Scroll to AutoHANG UP Press

3. Scroll or to selection on or off

4. Pies to confirm.

5. Press OK to return to statistics.

Display language

You can change the display language.

1. Press scoll to PERSOVAL SET and press

2. Scroll Language Press

3. Scroll or to select the language you want

4. Press to confirm

5. Press to return to standby.

Personal sellings 15

D701_1P1_EN_for_EU.hoek Page 16 Friday, August 24, 2007 5:19 PM

MOTOROLA

Babysit mode on/off

Leave one handset in a room and use another handset to hear sounds in that room.

1. Press to PERSONAL SET and press
2. Scroll to BABYSIT VCDPE Press
3. Press or to select OR or OFF.
4. Press to confirm.
   When switched On, you can leave this handset in the room you wish to monitor. Only the microphone is on. Anyone in the room cannot near you.

Babysit

1. Switch a handset's babysit mode setting On and place that handset in the room.

2. At a second handset, press 0 and enter the number of the handses you are using as a room monitor. You can now hear sounds coming from the room.

TIP

To stop room monitoring at any time, press

Backlight on/off

1. Press , scroll to PERSONAL SET and press
   2.Scrol1toBAGKLIGHTPress
2. Press 2: or 9 to select ON or OFF.
3. Press to confirm

Keypa

Prevent accidental dialing while carrying the handset by locking the keypad.

1. Press and hold
   The display shows KEsLOcED
2. To unlock the handset, press and hold again.
   NOTE
   While the keypad is locked, you can answer incoming calls as normal.

8. Advanced settings

This setting is useful to access certain network and PABX-switchboard services.

Recall time

The default D701 recall time is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.

1. Press , scroll to ADVANCED SET and press
2. RESALLTIME is displayed Press
3. Press or to select the setting you want: SHORT, MEDUUM LONG
4. Press to confirm
5. Press to return to standard

NOTE

The use of your D701 cannot be guaranteed on all PABX.

Dial mode

The default D701 dialling mode is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.

1. Press , scroll to ADVANCED SET and press (
2. Scroll to DUAL MODE Press
3. Pressor or to selcr TONEOR PULSE
4. Press to confirm.
5. Press to return to standby

Temporarily switch from Pulse to Tone dialling

1. Press and hold. The dial will change from Pulses to Tone for this duration of the call.

Call barring

Preven certain numbers from being dialed from your D701. Store up to four specific numbers,

each up to 4 digits - for example, international or local prefixes.

Bypass call barring by switching the setting Off or On.

NOTE

If you switch Call barring on, BARR VCOE ON will be displayed on your screen in standby mode.

Switch call barring on/off

1. Press , scroll to ADVANCED SET and press
2. Scrl1 1: to C4L BNNY, Pess
3. Enter the master PIN (default setting 9000) and press
4. NODE is displayed. Press
5. Press or to select ON or OFF. Press to confirm.
6. Press to return to standby. You can now set the number

(See below)

16 Advanced sellings

D701_INU_INfor EU book Page 17 Friday, August 24, 2007 5:19 PM

MOTOROLA

Set a number to be barred

1. Press to Advance Set and press

2.Scroll toCALLBARRNS.Press

1. Enter the master PIN (default setting 0000) and press OK.

2. Scroll to NUVER Press

3. If necessary, scroll or to the next available slot.

4. Press 一 and enter the number of prefix you want to bar. Press

to comrn.

7. Press to return to standby.

Boby cell

When activated, this feature allows you to dial a number by pressing any key on your handset (except . This feature is very useful for access in emergency services.

Switch baby call on/off

1. Press, scroll to ADVANCED SET and press

2. Scrlpl 10 Baby Call, Press

3. Enter the master PIN (default setting 0000) and press

4. NODE is displayed. Press 念 then press or to select OR or OFF. Press to confirm.

5. Press to return to statiny.

NOTE

If you switch Baby call on, BABY CALL CH will be displayed on your screen in standby mode.

To switch Payx call off again:

1.2

1. Press :

2. OFF! is displayed. Press to confirm.

Set the baby call number

1. Press , scroll to ADVANCED SET and press

2. Scroll to Baby Call, Press

3. Enter the master PIN (Default setting 000) and press

4. Scroll to NUvBER. Press

5. Ener Ibs nurnber Press 1

6. Press to return to main

Dial a baby number

1. When a baby call number has been stored and the baby call setting switched on, press any key (apart from (空) ), in dial a number.

NOTE

NOVE When baby call is switched on, you can still answer any incoming call as normal.

Registration

Up to 5 handsets can be registered to one base stallion. Additional handsets must be registered

to the base before you can use them.

The instructions described below apply specifically to your D701 handsuit. If you wish to

register another manufacturer's handset, the instructions may vary. In this case, please refer to the manufacturer of the additional handset.

The Master PIN is required before you can register or unregister handseels. The default PIN is 0000.

Register a handset

At the ose.

1. Press and hold the 34 button on the base station for at least 3 seconds. The base station emits a beep when it is ready to accept registration. You have 90 seconds in which to register.

At the handset:

1. Press and scroll to AVANCED SET and press
2. Scill 3 to RERIRATOH and stess
3. If necessary, scroll or to display REGIST. BASE and press , BASE 1214 is displayed and the registered base number is flashing. Enter the number of the base on which you wish to register your handset.
   If you have only 1 base slation, press ① . If you have 2 base slations, press ① or ② ,etc. 4. When the display shows PIN...enter the base PIN.
4. When the handest registers with the base, it is assigned a handest number.

Select a base

You can register your D701 handset with up to 4 bases. Once registered, you can switch between bases, for example, bases at home and at work.
1. Press and scoll to AVANCED SET end press
2. Scoll to REGISTATION and process
3. SIRIUS is declared破产 by 2017
-This available bases are displayed with the current base number flashing
4. Enter the number of the base you want = 1,2,3 or 4 and press
- When the base is found you hear a beep. if not found, the display shows INREGISTERED

Unregister a handset

1. Press and scroll to ADVANCED SET and press
2. Scoll to 108EETB and pess
3. Enter the 4 digit master PIN and press
   -Display shows the registered handset numbers.

4. Scall or to select the handseel you want to delete and press

5. UNREGISTERED is displayed on the handsol screen.

PIN

The 4-digit master PIN is used when registering or unregistering a handset and when changing some settings on your D701. The default setting is 0000. You can change this PIN for more security.
1. Press, scroll to Advanced Set and press
2. Scroll to PN Press (2)
3. Enter the current 4-digit master PIN and pass (Default setting 0000)
4. Enter the new PIN and press

Advanced settings 17

D701_1P1_EN_for_EU book Page 18 Friday, August 24, 2007 5:19 PM

MOTOROLA

NOTE

Make a note of your PIN. If you forget your PIN you will need to reset your product.

Reset

This will reset your D701 to its default settings.

1. Press scoll to ADVANCED SET and press

2. Scroll to RESET UNIT. Press

3. CONFIRM is displayed. Press OK

NOTE This color is reserved in the phonebook are retained. After reset, depending on your country, the welcome mode setting may be shown on the handset display.

Default settings

Handset name Handset

Key jane On

First ring On

Autojump On

A

Rngn rnnr nnnn

Kinga Keddy King T Driane, 1964

F

Earpere volume 3

Phonebook

Call log Empty

Redlist Empty

Master PIN: S000

Keyed lock. Cd

Clock

Alarm

Dial code

Unchanged

Auto prefix

You can set the D701 to detect a fading number and replace it with another number. The number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
1. Press scoll to APPENDIT and press
2. Scroll to FIEEL Press Ind
3.DETECT DIGIT is displayed. Press
4. Enter the number you want to be detected and press
5. Scroll to PREFX NUM and press 93
6. Enter the number you want it replaced with and press 一
7. Press to return to standby.

18 Advanced sellings

Country

if you move to another country you can set your phone to be compatible with the network settings of that country.

NOTE

If you make a mistake during welcome mode country selection, you can also reset your country.
Depending on your country, this option may be displayed as NOT AWU, or you country may not be displayed.
1. Press, scroll to ADVANCED SET and press
2. Scroll to SEL COUNTRY Press
3. Enter the 4-digit master PIN and press
4. Scroll or to display the required country.

Intrusion

When an external call is taking place, another handset registered to the base can join in, making the call a 3-way conference, just by pressing (串)
To enable this, intruslon must be switched On.
1. Press, scroll to Advanced Set and press
2. Scroll to IRUSION Press
3. Scroll A or to OR or OFF
4. Press to confirm.

ECO mode

To reduce the level of power emissions, you can select low power or ECO mode. When the ECO mode is set to 0i, the base transmission power will be reduced.
To sum ECO Mode to 0% or OFF
1. Press, scoll in wWwE0sE and press
2. Scroll to ECO WOPE and press
3. Press or to highlight all or off then press to confirm
A confirmation beep is ollled and the handaei display will switch between the handaei
osse and ECO NODE.

NOTE

When Eco Mode is set to OK, the handset range will be reduced.

D701_IN_IN_for_EJ.Hook Page 19 Friday, August 24, 2007 5:19 PM

MOTOROLA

9. Help

Charging

The is not scrolling when the handset is placed on the base

• Dirty contact - Clean the battery contact with a cloth moistened with alcohol

Battery is full - no need to charge

Calls

No dialling tone

• No power - check the connections. Reset the phone: unplug and pug back in the main

You are too far from the base - move closer to the base.

• Wrong line cable - use the line cable provided

• Line adaptor (when needed) is not connected to the line cord - connected the line adaptor (when

Fees to the line cord

Poor audio quality

The base is too close to electrical appliances, reinforced concrete walls or metal doorframes

A

The icon is blinking

• Handse is not registered to the base - register the handset to the base

You are too far from the base - move closer to the base

NOTING

• Increase the volume

Caller Line Identification (CLI) service does not work

Check your subscription with your network operator.

Phonebook

A phonebook entry cannot be stored

The phonebook is full. Delete an entry to free memory

Display

No display - To unhearing or replacing the ballpointer

• Try disconnections and connecting the base power supply.

• If LED is not lit up, then try disconnecting and connecting the base power supply.

Registration

Unable to register another handset

Maximum number of handseels has been reached.

The display shows ask me. You must register a name in order to register a new site.

Help 19

D701_INU_IN_for_EU.book Page 20 Friday, August 24, 2007 5:19 PM

MOTOROLA

10. General information

IMPORTANT

This equipment is not designed for making emergency telephone call when the power fails. Alternative arrangements should be made for access to emergency services.

This product is intended for connection to analogue public switched telephone networks and private switchboards in the United Kingdom.

Safety information

• Only use the power supply suitable for the D701 range. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone.
• Use only the approved rechargeable batteries supplied.
• Do not open the handset (except to replace the handset batteries) or the base. This could expose you to high voltages or other risks.
• Radio signal transmitted between the handset and base may cause interference to hearing aids.
• It is recommended that advice from a qualified expert be sought before using this product in the vicinity of emergencyintensive care medical equipment.
  It is recommended that if you have a pacemaker filled you check with a medical expert before using this product.
• Your product may interfere with other electrical equipment, e.g. TV and radio sets, clocks, alarms and computers if placed too close.
  It is recommended that you place your product at least one metre away from such appliances to minimise any risk of interference.
• Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals.

Cleaning

• Clean the handsnet and base (or charger) with a damp (not wet) cloth, or an anti-static wipe. Never use any soap and polish as this will damage the product. Never use a dry cloth as this may cause a static shock.

Environmental

Do not expose to direct sunlight.
- The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal. However, we recommend that to avoid damage you do not use the handset for more than 10 minutes.
- Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces.
- Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms.
Do not expose your product to fire,explosive or other hazardous conditions.
- There is a slight chance your phone could be damaged by an electrical storm. We recommend that you unplug the power and telephone line cord during an electrical storm.

Product disposal instructions

The symbol shown here and on the product means that the product is classed as "commercial" or "commercial waste" and can be disposed with other household or commercial waste at the end of its working life.

The Waste of Electrical and Electronic Equipment (WEEE; Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment, treat any hazardous substances and avoid the increasing landfill.

Product disposal instructions for residential users

When you have no further use for it, please remove any batteries and dispose of them and the product per your local authority's recycling processes. For more information please contact your local authority or a similar service provider.

Product disposal instructions for business users

Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal.

Warranty Information

The authorized Motorola dealer or relaier where you purchased your Motorola product will honour a warranty claim and/or provide warranty service.
Please return your radio to your dealer or retailer to claim your warranty service. Do not return your telephone to Motorola. In order to be eligible to receive warranty service, you must present your receipt of purchase or a comparable substitute proof of purchase bearing the date of purchase. The telephone should also clearly display the serial number. The warranty will not apply if the type or serial numbers on the product have been altered, deleted, removed, or made illegible.

What Is Not Covered By The Warranty

• Defects or damage resulting from use of the Product in other than its normal and customary manner or by not following the instructions in this user manual.
  Defects or damage from misuse, accident or neglect.
  Defects of damage from Improper testing, operation, maintenance, adjustment, or any
  alteration or modification of any kind.
• Breakage or damage to aerials unless caused directly by defects in material or workmanship.
• Products disassembled or repaired in such a manner as to adversely affect performance of
  prevent adequate inspection and testing to verify any warranty claim.
  Defects or damage due to range
• Defects or damage due to moisture, liquid or spills.
• All plastic surfaces and all other externally exposed parts that are scratched or damaged due
  in normal use
• Products tested on a temporary basis.
• Periodic maintenance and repair or replacement of parts due to normal usage, wear and tear.

20 General information

D701_1P0_DN_for_EJ. book Page 2: Friday, August 24, 2007 5:19 PM

MOTOROLA

Technical Information

How many telephones can I have?

All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. Your D701 has a REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephone may not meet different telephone types there is no guarantee of ringing, even when the REN is less than 4.

Any additional handsets and chargers that you register have a REN of 0.

Declaration of Conformance

Herby, Motorola declares that this D701 is in compliance with the essential requirements and other pre-approval provisions of Directive 1998/5EC.

The Declaration of Conformance for the D701 is published on the website: http://

www.motorola.com/teuradiois/technicaidocumentation

Inserting a pause

With some switchboards, after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line so you will need to enter a pause in the dialing sequence.

the other side of the equation.

Press and hold X to insert a pulse (P) before entering the telephone number.

Recall

You may need to use the recall function if you are connected to a switchboard/PBX (Private

Branch Exchange), contact your PBX supplier for further information.

General information 21

Bienvenue...

D701_HUFR.book Page 3 Monday, August 27, 2007 1:37 PM

Aerow / drosie in his der tounr

Preterm infants

du comine

D701_HUFR.book Page 5 Monday, August 27, 2007 1:37 PM

1. Pour commencer

ATTENTION

D701_1FU_PR.book Page 6 Monday, August 27, 2007 1:37 PM

MOTOROLA

ALERTE DE BATTERIE FAIBLE

D701_1PfPR.book Page 7 Monday, August 27, 2007 1:37 PM

MOTOROLA

A Ecouteur

B E C r a n

D701_1P1_PR.book Page 8 Monday, August 27, 2007 1:37 PM

MOTOROLA

C ▲

D701_1F1_PR.book Page 9 Monday, August 27, 2007 1:37 PM

MOTOROLA

D701_IFU_FR.book Page 10 Monday, August 27, 2007 1:37 PM

MOTOROLA

Interphone

D70H1PFRbook Page 11 Monday, August 27, 2007 1:37 PM

MOTOROLA

品

4. Répertre

D701_1FU_1R.book Page 12 Monday, August 27, 2007 1:37 PM

MOTOROLA

Modifierune fiche

D701_1PU_PR.book Page 13 Monday, August 27, 2007 1:37 PM

MOTOROLA

D701_1FU_PR.book Page 14 Monday, August 27, 2007 1:37 PM

MOTOROLA

D701_1FUPR.book Page 15 Monday, August 27, 2007 1:37 PM

MOTOROLA

D701_IFU_FR.book Page 16 Monday, August 27, 2007 1:37 PM

MOTOROLA

Langue d'affichage

D701_1FU_1R.book Page 17 Monday, August 27, 2007 1:37 PM

MOTOROLA

D701_1FU_1R.book Page 18 Monday, August 27, 2007 1:37 PM

MOTOROLA

REMARQUE

Lipidic support:Vine

Code PIN 0000

000600060000000600000006000000600000060000006

Hodge

B

Mode de numération

Prelude auto

D701_1PU_PR.book Page 19 Monday, August 27, 2007 1:37 PM

MOTOROLA

9. Aide

Chargement

D701_IFU_FR.book Page 20 Monday, August 27, 2007 1:37 PM

MOTOROLA

10. Information generales

IMPORTANT

D701_1FUPR.book Page 21 Monday, August 27, 2007 1:37 PM

MOTOROLA

F

D701_1FU DE. book Page 3 Monday, August 27, 2007 11:26 AM

1.减持主体

D701_1PU DE. in Page 5 Monday, August 27, 2007 4:48 PM

1. Inbetriebnahme

ACHTUNG!

D701_INU_DE.book Page 6 Monday, August 27, 2007 11:26 AM

MOTOROLA

WARNHINWEIS BEIGERNGERAKKUKAPAZITA T

m = 311 ;

m = 311 ;

D701_1P1.DE book Page 8 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_1FU DE. book Page 9 Monday, August 27, 2007 11:26 AM

Menunavigation

D701_IFU_DIE.book Page 10 Monday, August 27, 2007 11:26 AM

MOTOROLA

HINWEIS

D701_INU_DE.book Page 11 Monday, August 27, 2007 11:26 AM

D701_1FU DE. book Page 12 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_lFU_DE.book Page 13 Monday, August 27, 2007 11:26 AM

D701_IFU_DE.book Page 14 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_HU_DE.book Page 15 Monday, August 27, 2007 11:26 AM

MOTOROLA

6.Uhr & Wecker

D701_IFU_DIE.book Page 16 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_INU_DE.book Page 17 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_IFU_DE.book Page 18 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_lFU_DE.book Page 19 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_IFU_DIE.book Page 20 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_IFU_DIE.book Page 22 Monday, August 27, 2007 11:26 AM

MOTOROLA

D701_1F0_1T. book Page 1 Monday, August 27, 2007 2:15 PM

Benvenuti...

D701_1F0_1T. book Page 3 Monday, August 27, 2007 2:15 PM

MOTOROLA

1. Periniziars

Ubicazione 5

1

C

12

Cangua2108070

SCHNITZ 1

1

Dcscnione der teicino

Pardanikc del noeioi

D

Paini enica de la Nerve Cerebrovascular

1. Hua did telefoge

2. Oso del Oso de los

3. MATURNEO CHROMATO

R

-

D701_1F0_1T. book Page 5 Monday, August 27, 2007 2:15 PM

MOTOROLA

1. Per iniziare

AVVERTENZA

Non lssare 1D701 in bagna a in allr are wide

Ubicazione

D701_1PU_1T. book Page 6 Monday, August 27, 2007 2:15 PM

MOTOROLA

D701_lU_1T.book Page 7 Monday, August 27, 2007 2:15 PM

MOTOROLA

A Auricolare

B Display

Inseredieepeaepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepepe pe

precederbe-BACK (INDIDTERO)e visualzzso suio acemno.

1. Tax rate of tax payments

A

AVERTENZA

D701_1PU_1T. book Page 8 Monday, August 27, 2007 2:15 PM

MOTOROLA

B OK visualizzato

D701_1F0_1T.book Page 9 Monday, August 27, 2007 2:15 PM

MOTOROLA

3. Uso del Telefono

Chiamate

D701_1PU_1T. book Page 10 Monday, August 27, 2007 2:15 PM

MOTOROLA

Inte

D701_1PU_1T. book Page 11 Monday, August 27, 2007 2:15 PM

MOTOROLA

4. Rubrica

D701_1PU_1T. book Page 12 Monday, August 27, 2007 2:15 PM

MOTOROLA

701_1FU_1T.book Page 12 Monday, August 27, 2007 2:15 PM

D701_1PU_1T. book Page 13 Monday, August 27, 2007 2:15 PM

D701_1PU_1T. book Page 14 Monday, August 27, 2007 2:15 PM

MOTOROLA

Impactors in Syaglia

1. Premere, e scomer (f) nla a 0xuegekpreme
2. Scorrere fino a NP sVEaue preme 1
   1 Scorere 0 fno a DSAHTNA LNA VOLTA BGCAHALVENTE qundi preme r e
3. Se si selezions LAA VOLTA DORALMENE, inserire fora usando I formato 24 ore HHVMS 14.45
   2450
   5.2008 1

D701_1PU_1T. book Page 15 Monday, August 27, 2007 2:15 PM

MOTOROLA

D701_IFU_IT.book Page 16 Monday, August 27, 2007 2:15 PM

MOTOROLA

D701_1PU_1T. book Page 17 Monday, August 27, 2007 2:15 PM

3.100%

1. Premere - performare in standby

NOTA

D701_1F0_1T.in Page 18 Monday, August 27, 2007 4:06 PM

MOTOROLA

Reimposta

D701_1PU_1T. book Page 19 Monday, August 27, 2007 2:15 PM

MOTOROLA

9. Assistenza

Carica

D701_1FU_1T. book Page 21 Monday, August 27, 2007 2:15 PM

MOTOROLA

D701_HU_ESE.book Page 3 Monday, August 27, 2007 3:18 PM

MOTOROLA

1. Introduccion

D701_HU_ESE.book Page 5 Monday, August 27, 2007 3:18 PM

1. Introduccion

ADVERTENCIA

D701_1FU_LS.book Page 6 Monday, August 27, 2007 3:18 PM

MOTOROLA

D701_1PU_ES.book Page 7 Monday, August 27, 2007 3:18 PM

MOTOROLA

A Auricular

B Pantalla

A. register to individualities B. register to locations

Dapoliza nape a riva de lestas x auates

m = 311 ;

Sob

Mode manes libres.

D701_1FU_ES.book Page 8 Monday, August 27, 2007 3:18 PM

MOTOROLA

B Se muestra OK

character o cancelar una action.

D701_HU_ESE.book Page 9 Monday, August 27, 2007 3:18 PM

MOTOROLA

3. Utilizacion del Telefono

Llamadas

Realizar una llama

1. Marque o numero de telofofo.

Premarcado

D701_1FUSLS. book Page 10 Monday, August 27, 2007 3:18 PM

MOTOROLA

This function will always be applicable to any registered entity (hereinafter "Terminals"). In general, the terminals may be either names or names of entities, transfer指令或命令等。If a name is not available in the application deconferencia,

D701_1FUS. book Page 11 Monday, August 27, 2007 3:18 PM

MOTOROLA

4.Agenda

Los nombres peuvent tener una longituda de 24 digités, cuando que la longitudue los nombresSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEOSEO SEO

D701_1PUL_ES. book Page 12 Monday, August 27, 2007 3:18 PM

MOTOROLA

Editar una entrada

D701_1FU_ES.book Page 14 Monday, August 27, 2007 3:18 PM

MOTOROLA

D701_1FUS. book Page 15 Monday, August 27, 2007 3:18 PM

MOTOROLA

7. Ajustes personales

Tonos del terminal

ADVERTENCIA

D701_IFU_ES.book Page 16 Monday, August 27, 2007 3:18 PM

MOTOROLA

Idioma en pantalla

D701_1FUSLSbook Page 17 Monday, August 27, 2007 3:18 PM

D701_IFU_ES.book Page 18 Monday, August 27, 2007 3:18 PM

MOTOROLA

D701_1FUSLS. book Page 19 Monday, August 27, 2007 3:18 PM

MOTOROLA

9. Ayuda

Carga

D701_1FUSLSbook Page 21 Monday, August 27, 2007 3:18 PM

MOTOROLA

Información técnica