Get Together EMJA006 - Hi-fi system HOUSE OF MARLEY - Free user manual and instructions

USER MANUAL Get Together EMJA006 HOUSE OF MARLEY

Audio System Greetings and Welcome to the House of Marley We are honored you have selected Get Together to become part of your music experience. Get Together is a portable stereo sound system which works with Bluetooth

devices connected wirelessly and hundreds of other devices via the auxiliary input. The system uses two high-output, long- throw 3.5” (89mm) woofers in a ported enclosure, two 1” (25mm) tweeters and a powerful amplifier. The system uses custom-milled bamboo front and rear sections and is wrapped in REWIND™ fabric composed of reclaimed hemp, organic cotton, and recycled plastic bottles (RPET). Everything You Need to Jam The Get Together comes with the following items: Sound System AC Power Supply (100-240 VAC) Powering Your Get Together Get Together includes a built-in rechargeable battery that is charged by the included power supply. The LED by the power port will glow RED when the system is charging and turn off once the battery is full. Using a Wall Outlet

1. Insert the AC power supply cord into the Get Together.

2. Insert wall plug into an appropriate wall outlet.

Connecting Your Music Device(s) Pairing Mode (Flashing Blue LED) Get Together automatically goes into reconnect mode for 5 seconds as soon as you turn it on (flashing BLUE led). It then switches to auxiliary mode (RED led). You can pair a new device to Get Together by holding the for 3 seconds. Note: Holding the for 3 seconds will kick off the device currently connected to Get Together and go into Pairing Mode. Connected Mode (Solid Blue LED) Use your Bluetooth-enabled device to pair to Get Together. Get Together does not require a pairing password. Once paired, the LED will glow solid blue. Note: Get Together will automatically pair with the last device connected to it when turned ON (when possible). (1) (2) EN3

Connecting other devices The auxiliary input on the back of Get Together allows you to connect other audio devices to the system. Easy To Use When the system is powered and a device is connected, you are ready to enjoy your Get Together.

1. Press the power button to turn Get Together on. Press the power button again to turn Get

2. Increase or decrease the volume on Get Together by pressing or holding the – and + buttons until

the desired volume is reached. You can also adjust the system volume using the controls on your music source.

3. Quickly press the while music is playing to pause and resume playback directly from Get Together.

Charging Your Device A convenient USB port is available on the back of Get Together to charge your devices while it is on. Use the cable that came with your device to charge. NOTE: Not all devices are compatible with the USB port. If your device does not charge, use the power adapter that came with it. Battery Replacement Your Get Together includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery please contact Customer Services who will supply details of the warranty and out-of-warranty replacement battery service. WEEE EXPLANATION This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. BATTERY DIRECTIVE This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points. - Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user- serviceable parts inside. Refer servicing to qualified personnel. - The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. (1) (2) (3)4 Important Safety Information

1. Follow and keep these instructions.

2. Heed all warnings.

3. Do not use this apparatus near water.

4. Clean only with a dry cloth.

5. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

7. Protect the power cord from being walked on or pinched particularly at plug, convenience

receptacles, and the point where they exit from the apparatus.

8. Only use attachments/accessories specified by the manufacturer.

9. Unplug this apparatus during lightning storms or when unused for long periods of time.

10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

12. The apparatus should not be exposed to dripping or splashing and objects filled with liquids, such

as vases, should not be placed on apparatus.

13. The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as

sunshine, fire or the like.

14. WARNING: The direct plug-in adapter is used as disconnect device, the disconnect device shall

remain readily operable.

15. No naked flame sources, such as lighted candles, should be placed on the apparatus.

16. Max. operation temperature is 45°C.

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CANADA STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition et la conformité de rf. EN5 Get Together Sistema de audio portátil con tecnología Bluetooth

at slukke for Get Together.