Redemption ANC 2 - Earphones HOUSE OF MARLEY - Free user manual and instructions

USER MANUAL Redemption ANC 2 HOUSE OF MARLEY

• Remove earbuds and remove paper film from the bottom.

• Place earbuds back into charging case and leave closed for 15 minutes before first pair.

• Remove earbuds from the charging case and they will automatically go into pairing mode indicated by alternating red/white flashing on one of the earbuds.

• Select “Redemption ANC 2” from your device’s Bluetooth

• Once paired, simply removing earbuds from the case will automatically pair to your device

• Download the House of Marley app on your devices app store for added functionality.

Tap case to check battery level. LEDs on case will indicate status.

3. Force pair to New Device:

• Open case lid and place earbuds in ears, tap either earbud 5 times, the pairing mode will sound and alternating red/white LED on earbud will begin.

• Remove earbuds from case. Press and hold on each earbud for 10 seconds to force earbud to power off (3 red flashes will indicate power off).

• Press and hold on both earbuds until white/ red flashing is showing, continue to hold until earbuds flash red 3 times and power off.

• Return earbuds to case and close lid.

• Upon opening charging case, earbuds will be reset to factory settings.

• Als u de oplader opent, worden de oordopjes teruggezet naar de fabrieksinstellingen. ----------------------------TheHouseofMarley.com BOB MARLEY™ MARLEY™ BOBMARLEY.COM ©Fifty-Six Hope Road Music Ltd., 2011-2021. Right of Publicity and Persona Rights. Fifty-Six Hope Road Music Ltd. EM-DE031 Marley, the Marley logo, Bob Marley and the Bob Marley logo are registered trademarks of Fifty-Six Hope Road Music Limited and any use of such marks by The House of Marley is under license. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by The House of Marley is under license. REDEMPTION ANC 2 QUICK START GUIDERedemption ANC 2 / 블루투스

READ ALL INSTRUCTIONS BEFORE USE AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

For Australia and New Zealand for charging this equipment, only use Australian approved detachable power supply unit with the output ratings of 5V DC, 500 mA. FCC RF EXPOSURE STATEMENT: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. CAUTION! Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ISEDC STATEMENT

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. ISEDC RF EXPOSURE STATEMENT: REDEMPTION ANC 2The device is compliant with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. End user must follow the specic operating instructions for satisfying RF exposure compliance. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certication for use when properly worn on the body.

Your Redemption ANC 2 includes a rechargeable battery designed to last the lifetime of the product. In the unlikely event that you should require a replacement battery, please contact Consumer Relations who will supply details of the warranty and out-of-warranty replacement battery service. CAUTION Risk of explosion if the battery is replaced by an incorrect type – replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); – disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; – leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of ammable liquid or gas; – a battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid or gas. BATTERY DIRECTIVE This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points. WEEE EXPLANATION This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. Hereby, FKA Brands Ltd, declares that this radio equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. A copy of the Declaration of Conformity can be obtained from www.thehouseofmarley.co.uk/ declaration-of-conformityFR REDEMPTION ANC 2 LIRE TOUTES LES INSTRUCTIONS AVANT UTILISATION. LES CONSERVER POUR POUVOIR LES CONSULTER ULTÉRIEUREMENT.

www.thehouseofmarley.co.uk/declaration-of-conformity

word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by The House of Marley is under license. Operating frequency band: 2402 – 2480MHz CE BT Max Power Transmitted Power: Left Ear:11dBm, Right Ear:11dBmRight Earbud EM-DE031R

IC:10613A-EMDE031 210-161327 210-161438 Distributed by House of Marley, LLC, 3000 N. Pontiac Trail, Commerce Township, MI 48390. Distributed in Australia by HoMedics Australia Pty Ltd, 14 Kingsley Close, Rowville, Victoria 3178. Distributed in New Zealand by CDB Media Ltd, 4 Lovell Court, Albany, Auckland, New Zealand 0800 232 633 Imported into the UK by FKA Brands Ltd, Tonbridge, TN110GP, UK. Imported into the EU by FKA Brands Ltd, 29 Earlsfort Terrace, Dublin 2. IE QS-EMDE031 EM-DE031 © 2021 House of Marley, LLC. All Rights Reserved.