DO926BFK - Fridge DOMO - Free user manual and instructions

USER MANUAL DO926BFK DOMO

sind nicht in der Garantie eingeschlossen.

WARRANTY This appliance has a two year warranty period. During this period the manufacturer is

responsible for any failures which are the direct result of construction failure. When these

failures occur the appliance will be repaired or replaced if necessary. The warranty will

not be valid when the damage to the appliance is caused by wrong use, not following the

instructions or repairs executed by a third party. The warranty will only be valid if the

warranty application has been completed by the dealer at the time of purchase. All parts,

which are subject to wear, are excluded from the warranty.

Downloaded from www.vandenborre.beDO926BFK LINEA 2000 - Dompel 9 - 2200 Herentals Belgium - Tel 014/21.71.91 - Fax : 014/21.54.63

If your device breaks down within the 2-year warranty period, you can return the device

together with your receipt to the shop where you purchased it.

CONDICIONES DE GARANTÍA Este aparato tiene un término de garantía de 2 años, desde la fecha de la compra.

Downloaded from www.vandenborre.beDO926BFKLINEA 2000 - Dompel 9 - 2200 Herentals Belgium - Tel 014/21.71.91 - Fax : 014/21.54.63

RECYCLING INFORMATION This symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be brought to the applicable collection

point for recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the en-

vironment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local city ofce, your household waste disposal service or the shop

where you purchased the product.

The packaging is recyclable. Please treat package ecologically

INFORMACIÓN DE RECICLAJE El símbolo en el producto o el embalaje indica que este producto

From now on, accessories and parts of Domo appliances can also be ordered online from the

http://webshop.domo-elektro.be

You can reach the webshop through the Domo website as well: www.domo-elektro.be. The

accessories and parts can also still be obtained at the store where you bought the appliance.

Nyní je možné nakupovat originální příslušenství i náhradní díly online přes internetový

* Only in Belgium, the Netherlands, Luxemburg, France and Germany.

From now on, accessories and parts of Domo appliances can also be ordered online from the

http://webshop.domo-elektro.be

You can reach the webshop through the Domo website as well: www.domo-elektro.be. The

accessories and parts can also still be obtained at the store where you bought the appliance.

Nyní je možné nakupovat originální příslušenství i náhradní díly online přes internetový

* Only in Belgium, the Netherlands, Luxemburg, France and Germany.

geschulten Person ersetzt werden, um Unfälle zu verhindern.

If the power supply cord is damaged, it must be replaced by

the manufacturer, its service agent or a similarly qualied

person in order to avoid a hazard.

Cuando el cable de alimentación está dañado, tiene que ser

tting) gloeilamp in.

plaats deze op een zacht oppervlak om krassen te vermijden.

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

overeenkomstige positie aan de tegenovergestelde kant van de bodem.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

Downloaded from www.vandenborre.beDO926BFK 29 www.domo-elektro.be

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

position correspondante sur le côté opposé sous l’appareil.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

Vermeidung von Kratzern auf einen weichen Untergrund.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

entsprechenden Position an der gegenüberliegenden Seite am Boden wieder ein.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

neuen Türstopper ein und schrauben Sie diesen fest.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

befestigen Sie die Abdeckung erneut.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

• - This appliance must be grounded. In the event of an

electrical short circuit, grounding reduces the risk of

electrical shock by providing an escape wire for the

• - Do not use an extension cord

• - Use an exclusive wall outlet. Do not connect your

refrigerator to extension cords or together with any other

appliance in the same wall outlet. Do not splice the cord.

• - An empty refrigerator is a very dangerous attraction to

children. Remove either the gasket, latches, lids or doors

from unused appliances, or take some other action that

will guarantee it harmless.

• - Do not damage the refrigerant circuit.

• - If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualied

person in order to avoid a hazard.

• - Risk of child entrapment. Before you throw away your

old refrigerator or freezer.

• Take off the doors

• Leave the shelves in place so that children may not easily

This appliance can be used by children, starting from the

age of 8 and up. And by persons with a physical or sensorly

limitation as well as, mentally limited persons or persons

with a lack of experience and knowledge. On the condition

that these persons have received the necessary instruction on

how to use this appliance in a safe way and they must also

know the dangers that can occur in using this appliance.

Children cannot be allowed to play with the appliance.

Downloaded from www.vandenborre.beDO926BFK

Maintenance and cleaning of the appliance, cannot be done

by children younger than 8 year old.

This appliance is suitable to be in an household environment

and in similar surroundings such as :

• Kitchen for personnel of shops, ofces or other similar

professional surrounding.

• Hotel or motel rooms and other surroundings with a

residential character

• Guest rooms or similar

Attention : This appliance can not be used with external timer

or separate remote control.

3. Cover for vegetable container

8. Door bottle shelf

INSTALLATION Remove the exterior and interior packing, wipe

the outside thoroughly with a soft dry cloth and

the inside with a wet, lukewarm cloth. Avoid

placing the cabinet in a narrow recess or near any

leave source, direct sunlight, or moisture. Let air circulate freely around the cabinet.

Keep the rear of the refrigerator 127mm away from the wall.

1. Select a place with a strong, level oor.

2. Allow 13 cm of space between the back of the refrigerator and any adjacent wall.

3. Avoid direct sunlight and heat. Direct sunlight may affect the acrylic coating.

Heat sources nearby will cause higher electricity consumption.

4. Avoid very moist places. Too much moisture in the air will cause frost to from

very quickly on the evaporator, and your refrigerator.

• Before connecting your refrigerator to the power supply, check that the voltage

stated on the rating label of your appliance corresponds to the voltage in your

home. A different voltage could damage the appliance.

• The appliance must be grounded. The manufacturer is not responsible for

damages that may occur as a result of usage without grounding.

• For uneven surfaces, front feet can be aligned.

• After installation, leave the freezer for 3 hours before turning it on. This way the

refrigerant can settle.

CARE AND MAINTENANCE Cleaning

Do not use abrasive cleaning agents or solvents.

1. Set the temperature control knob to the OFF position and disconnect the mains

plug from the mains socket.

2. Take out the food and store in a cool location.

3. Clean the appliance with a soft cloth, warm water and detergent.

4. Wipe the door seal with clear water only and then wipe dry thoroughly.

5. After cleaning reconnect and adjust the temperature control knob as desired.

6. Put the food back into the appliance.

Beware: Unplug the appliance from the power supply before replacing the light bulb.

1. Remove the bulb cover by pushing it upwards.

2. Unscrew the old bulb and then screw a new 15W (E14 base) bulb.

3. Replace the bulb cover.

DEFROSTING The refrigerator defrosts fully automatically.

While the cooling is running, beads of condensation or hoarfrost form at the back

of the refrigerator. This is normal. It is not necessary to wipe off the condensation

or frost. The rear panel defrosts automatically. The condensation runs into the

condensation channel and is conveyed to the cooling from where it evaporates.

Note: Keep the condensation channel and drainage hole clean, so that the condensation

A layer of frost in the freezer will impair refrigeration of the frozen food and increases

power consumption. Remove the layer of frost regularly. Do not scrape off frost or ice

with a knife or pointed object. Doing this may damage the refrigerant tubes.

1. Remove the frozen food and place temporarily in a cool location.

2. Disconnect the appliance from the mains socket.

3. To accelerate the defrosting process, place a pan of hot water on a stand in the

Downloaded from www.vandenborre.beDO926BFK

4. Wipe up condensation with a cloth or sponge.

5. Wipe dry the freezer compartment.

6. Plug in the appliance and adjust the temperature control knob as desired.

7. Put the frozen food back in the freezer.

AMBIENT TEMPERATURE This appliance is designed to operate in ambient temperature between 16°C and

38°C. If these temperatures are exceeded, i.e. colder or warmer, the appliance will not

BEFORE PLACING FOOD IN THE FRIDGE

• Remove all packaging.

• Allow the appliance to run empty for 2 – 3 hours so the compartment can cool to

the appropriate temperature.

• Clean the inside of the appliance with warm water and a little liquid detergent to

remove manufacturing and transportation dust.

TEMPERATURE CONTROL The fridge is controlled with a temperature control knob located inside the appliance.

Adjust the control knob as desired to suit your individual preference.

• OFF is off setting

• MIN is warmest setting

• MED is normal setting

• MAX is coldest setting

• In the OFF position the appliance does not operate (the cooling system is

switched off), but power supply is not interrupted.

• The running time and temperature are affected by where the fridge is located, how

often the door is opened and the temperature of the room the fridge is located in.

• When you use the appliance for the rst time or after defrosting, adjust the control

knob to the coldest setting for at least 2 hours before introducing food to be

stored, and then readjust to the middle setting.

MOVING YOUR APPLIANCE If the appliance is turned off for any reason, wait for 10 minutes before turning it back

on. This will allow the refrigeration system pressures to equalise before restarting.

• Turn off the appliance and unplug it from the mains socket. Remove all food.

Also remove all mobile parts (shelves, accessories, etc.) or x them into the fridge

• Relocate and install. If the appliance has been left on its side for any length of

time, leave it standing upright for at least 10 minutes before turning on.

Downloaded from www.vandenborre.beDO926BFK

Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an

environmentally friendly and natural gas, it is explosive. Therefore you should be

careful during shipment and installation to prevent your appliance’s cooler elements

from being damaged. In the event of a leak caused by damage to the cooler elements,

move your fridge from open ame or heat sources and ventilate the room where the

appliance is located for a few minutes.

STORING FOOD IN THE FRIDGE The fridge helps to extend the storage times of fresh perishable foods.

Fresh food care for best results:

• Store foods that are very fresh and of good quality.

• Ensure that food is well wrapped or covered before it is stored. This will prevent

food from dehydrating, deteriorating in colour or losing taste and will help

maintain freshness. It will also prevent odour transfer.

• Make sure that strong smelling foods are wrapped or covered and stored away

from foods such as butter, milk and cream which can be tainted by strong odours.

• Cool hot foods down before placing them in the fridge.

FREEZING AND STORING FOOD IN THE FREEZER Use the freezer

• To store deep-frozen food.

• To make ice cubes.

Note: Ensure that the freezer door has been closed properly.

Store at -18°C or colder. Avoid opening the freezer drawers unnecessarily.

Purchasing frozen food

• Packaging must not be damaged.

• Use by the ‘use by /best before/best by/’ date.

• If possible, transport deep-frozen food in an insulated bag and place quickly in the

Freeze fresh and undamaged food only. To retain the best possible nutritional value,

avour and colour, vegetables should be blanched before freezing.

Aubergines, peppers, zucchini and asparagus do not require blanching.

Note: Keep food to be frozen away from food which is already frozen.

• The following foods are suitable for freezing: Cakes and pastries, sh and

seafood, meat, game, poultry, vegetables, fruit, herbs, eggs without shells, dairy

products such as cheese and butter, ready meals and leftovers such as soups,

stews, cooked meat and sh, potato dishes, soufés and desserts.

• The following foods are not suitable for freezing:Types of vegetables, which are

usually consumed raw, such as lettuce or radishes, eggs in shells, grapes, whole

Downloaded from www.vandenborre.beDO926BFK

apples, pears and peaches, hard-boiled eggs, yoghurt, soured milk, sour cream,

To prevent food from losing its avour or drying out, place food in airtight packaging.

1. Place food in packaging.

3. Seal the wrapping.

4. Label packaging with contents and dates of freezing.

Plastic lm, tubular lm made of polyethylene, aluminium foil, freezer containers.

These products are available from specialist outlets.

Recommended storage times of frozen food in the freezer

These times vary depending on the type of food. The food that you freeze can be

preserved from 1 to 12 months (minimum at -18°C).

Bacon, casseroles, milk 1 month

Bread, ice cream, sausages, pies, prepared shellsh, oily sh 2 months

Non-oily sh, shellsh, pizza, scones and mufns 3 months

Ham, cakes, biscuits, beef and lamb chops, poultry pieces 4 months

Butter, vegetables (blanched), eggs whole and yolks, cooked cray-

sh, minced meat (raw), pork (raw)

Fruit (dry or in syrup), egg whites, beef (raw), whole chicken, lamb

• When you freeze fresh foods whit a ‘use by /best before/best by/’ date, you must

freeze them before the expiry of this date.

• Check that the food was not already frozen. Indeed, frozen food that has thawed

completely must not be refrozen.

• Once defrosted, food should be consumed quickly.

VACATION TIME For short vacation periods, leave the control knobs at their usual settings. During

• disconnect from electrical outlet,

• clean the refrigerator thoroughly, including defrost pan,

• leave door open to avoid possible formations of condensate, mold or odors.

Downloaded from www.vandenborre.beDO926BFK

POWER FAILURE Most power failures are corrected within an hour or two and will not affect your

refrigerator temperatures. However, you should minimize the number of door

openings while the power is off. During power failures of longer duration, take steps

to protect your food by blacking dry ice on top of packages.

Frozen food should not be affected if the power failure lasts for less than 15 hours.

Do not refreeze frozen foods that have thawed completely. The food may be

SOME IMPORTANT RULES FOR THE CORRECT USE OF THE REFRIGERATOR

• Never place hot foods in the refrigerator,

• Beverages should be stored in sealed containers.

• Foods to be stored for a long time should be wrapped in cellophance or

polyethylence, or kept in glass containers.

• Never place spoiled foods in the cabinet.

• Don’t overload the cabinet.

• Don’t open the door unless necessary.

• Caution: please keep the products away from the re or similar glowing substance

before you dispose the refrigerator.

• Caution : Not for outer camping use (ex. Tent)

• Caution: For indoor use only.

• Caution: The appliance can not be used in public transportation.

• Do not freeze food again after it has been defrosted already.

• Do not place carbonated liquids such as zzy drinks into the freezer.

• Be careful when consuming ice lollies straight from the freezer to avoid freeze

• Do not take anything out of the freezer with wet hands.

• The freezer produces sounds when the compressor pumps the refrigerant around.

• Do not place any hot foods into the freezer.

• Make sure that all food in the freezer is covered.

• Do not press together the food. The air should be able to circulate around the

• Do not leave the door open for too long. Also make sure that the door is always

• Label the food with the date to be able to check the expiration in the freezer.

DOOR CONVERSION If you need to hinge your door on the opposite side it is recommended that you call

your local authorised service agent to make this conversion or ask a technician.

Before you reverse the door, you should ensure the appliance is unplugged and empty.

It is recommended to use a crosshead screwdriver and a spanner (both not supplied).

Downloaded from www.vandenborre.beDO926BFK 50

1. Remove the cover plate of the screws. Remove the three screws and then the

upper hinge that holds the door in place. Lift the door off and place it on a soft

surface to prevent scratching.

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

2. Remove the centre cover plates, screws and hinge. Place them on the other side.

Lift the door off and place it on a soft surface to prevent scratching.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

3. Remove the lower screws, hinge and the adjustable foot from the base of the

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

4. Remove the adjustable foot from the other side of the base and move it to the

same position on the opposite side of the base.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

(notthesame one) on the reversible side� Screw it down� 1110 GB GB

5. Fasten the screws, hinge bracket and the adjustable foot to the other side of the

6. Carefully replace the bottom part of the door into position. Make sure that the

door is aligned horizontally as well as vertically so that the seal is closed on

all sides before you tighten the centre hinge completely. Return the hinge to its

positions and fasten it.

Downloaded from www.vandenborre.beDO926BFK

7. Position the upper door. Remove the door stop. Place a new doorstop and fasten it

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

8. Position the hinge of the upper door, fasten it with the screw and replace the cover

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

9. With the door closed, check whether the door is aligned horizontally as well as

vertically and that the seal closes on all sides before you tighten the upper hinge

completely. If necessary, adjust the adjustable feet.

TROUBLE SHOOTING Frequently, a problem is minor and a service call may not be necessary, use this

trouble shooting guide for a possible solution.

Check connection of power cord to power source.

2. Cools too frequently

Check temperature setting and adjust as needed.

Close door securely.

Be sure that food is cool before inserting.

Do not keep door open for too long and MINIMIZE door openings.

Do not place unit close to heat sources Or direct sunlight.

3. Intemal temperature not cold enough

Check connection of power cord to Power source.

Downloaded from www.vandenborre.beDO926BFK

Check setting and adjust as needed.

Close door securely.

Be sure that food is cool before inserting.

Do not keep door open for too long and MINMIZE, door openings.

Allow room for airto circulate around unit..

Do not place unit close to heat sources or direct sunlight.

5. Freezer is not cold enough

Check setting and adjust as needed

Close door securely.

Be sure that food is cool before inserting.

Do not keep door open for too long.

Downloaded from www.vandenborre.beDO926BFK 63 www.domo-elektro.be

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

Levante la puerta y colóquela sobre una supercie suave para evitar arañazos.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

correspondiente en el lado opuesto de la parte inferior.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

8. Coloque las bisagras de la puerta superior, atornille y vuelva a colocar la chapita.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

místo, tak aby se nepoškrábaly.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

Downloaded from www.vandenborre.beDO926BFK 74

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

4. Z podstavce vyšroubujte i druhou přední nožičku a přendejte na druhou stranu.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

horním krytem, tak jak bylo z počátku.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

Downloaded from www.vandenborre.beDO926BFK 83 www.domo-elektro.be

SHOPPING FOR FROZEN FOOD The appliance is rated as a 4 star freezer and can freeze fresh food and store pre-frozen food� When

you are buying frozen food, look at the Storage Guidelines on the packaging� You will be able to store

each item of frozen food for the period shown against the 4 star rating�

FREEZING FRESH FOOD Ensure that your freezing operations are carried out under the most hygienic conditions as freezing

alone does not improve the food�

Never put hot or even warm foodstus into the freezer�

Prior to freezing the food, food should always be covered tightly with foil, plastic lm, placed in

plastic bags or stored in airtight containers� This will prevent food from dehydrating and to prevent

any strong odors of some foods transferring to milder ones�

To freeze raw meat, wrap in plastic bags or in airtight containers and place on the lowest shelf to

avoid cross contamination�

Do not allow raw meat to come into contact with cooked foods� For safety, only store raw meat for

two or three days� Fruit and vegetables should be thoroughly cleaned and placed in the crisper�

Milk and other liquids should be sealed with lids and placed in the bottle shelf in the door�

NOTE: The ambient temperature of the freshly stored food and how often the door is opened aect

the temperature in the refrigerator� If required, change the thermostat temperature settings�

STORING FROZEN FOOD All frozen food you purchase should be placed in the freezer as soon as possible to avoid them from

defrosting and spoiling�

All storage recommendations printed on the packaging of frozen food by the manufacturer should

When using the freezer for the rst time or after defrosting, set the thermostat knob to the maximum

position for at least 2 hours before introducing food to be stored, and then readjust it to the normal

The technical data mentioned in the ‘Specications’ are obtained in the case that the freezing drawers

1� Fill the ice tray with ¾ full of clean water�

2� Place the tray in the top freezing drawer�

To remove the ice cubes from the tray, put the tray under running water for a while and then twist

the tray slightly to loosen the ice cubes�

Follow the following stages to reverse the door from its initial position�

1� Remove the hinge cover�

Remove the hinge cover

stranou na mäkké miesto, tak aby sa predišlo poškriabaniu.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

3. Odskrutkujte spodný pánt dverí aj predné (výškovo nastaviteľnú) nožičku.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

4. Z podstavca vyskrutkujte aj druhú prednú nožičku a preložte na druhú stranu.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

horným krytom, tak ako bolo zo začiatku.

2� Remove three screws with suitable tools� Remove the upper hinge then take o carefully the

fridge compartment door�

3� Remove middle hinge, screws, screw caps and plastic inserting nails� Install them on the other

side� Take o the lower door and put it away�

4� The disassembly and installation of bottom parts :

A� Disassemble lower hinge and screws� Then install them on the other side and consolidate the

Note: the refrigerator-freezer incline angle less 45°�

B� Swap over the position of the adjustable foot to the other side of the cabinet�

8� Move the hinge to another side of the box after removing the screws on the hinge;

Usescrewstofasten�

9� Install the hinge cover after fastening the hinge�

C� Swap over the position of the lower door block to the other side� Install the screws and

5� Install the lower door and take care of its alignment with the appliance body�

6� Tighten the screws of the middle hinge on the reversible side�

7� Install the top door and remove the existing top door block� Install a new top door block

the original Domo accessories and parts online at:or scan here: webshop.domo-elektro.be