Silk S9600 - Lisseur REMINGTON - Free user manual and instructions

USER MANUAL Silk S9600 REMINGTON

ENGLISH Thank you for buying your new Remington® product.

Please read these instructions carefully and keep them safe. Remove all

packaging before use.

F IMPORTANT SAFETY INSTRUCTIONS

1 This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been supervised/instructed and

understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be done by children unless they are

older than 8 and supervised. Keep the appliance and cable out of reach of

children under 8 years.

2 Always ensure the voltage to be used corresponds to the voltage

stated on the unit before plugging the appliance into the mains

3 Warning: Do not use this appliance near bathtubs, showers,

basins or other vessels containing water.

4 When the appliance is used in a bathroom, unplug it after use since

the proximity of water presents a hazard even when the appliance is

5 Do not wrap the cord around the unit. Check the cord regularly for any sign of

6 If the supply cord of this unit becomes damaged, discontinue use immediately

and return the appliance to your nearest authorised Remington® service dealer

for repair or replacement in order to avoid a hazard.

7 Do not use the appliance if it is damaged or malfunctions.

8 Do not allow any part of the appliance touch the face, neck or scalp.

9 Do not leave the appliance unattended while plugged in.

10 Only set the appliance down on a heat-proof surface.

11 Do not place the appliance on any soft furnishings.

12 Do not use attachments other than those we supply.

13 This appliance is not intended for commercial or salon use.

14 Let the appliance cool down before cleaning and storing away.3

ENGLISH C KEY FEATURES

1 Advanced Silk Ceramic coated plates

3 Temperature controls

8 Heat resistant storage bag

ENGLISH C PRODUCT FEATURES

or it is left on after 60 minutes.

• Multivoltage:forhomeorabroad.At120Vtimesandtemperaturesmayvary.

• 5yearguarantee.

F INSTRUCTIONS FOR USE

1 Before use, ensure the hair is clean, dry and tangle-free.

2 For extra protection use a heat protection spray.

,Hairsprayscontainammablematerial–donotusewhileusingthisproduct.

3 Section the hair prior to styling. Style the lower layers rst.

4 Plug the product into the mains power supply.

Press and hold the on button to switch on.

5 B When the styler is plugged in but not turned on a lock symbol will show in

the display window indicating the styler is in standby mode.

6 Start styling on lower temperatures rst. Select appropriate temperature for

your hair type using the controls on the side of the product.

, Recommended temperatures:-

Symbol Temperature Hair type

Temperature Boost to

ENGLISH Caution: The hottest temperatures should only be used by experienced stylers

If you plan to use this straightener on the boost setting of 240ºC please test

on a small section of your hair rst.

7 Recommended temperatures are indicated by the hair strand symbols on the

right hand side of the temperature display.

8 Thedigitaldisplaywillstopashingwhentheproductisreadytouse.

9 Working on one section at a time, run the straightener through the entire

length of the hair without stopping.

10 Only repeat twice per section to prevent damage to the hair.

11 After use, press and hold the o button to turn o then unplug the appliance.

, Temperature Boost Function:

For quick touch ups of stubborn, hard to style sections.

 Thetemperatureboostfunctionbooststhetemperatureto240°Cfor30

seconds after which it will return to the previously set temperature.

Hold the ‘+’ button for 2 seconds to operate.

Caution: the highest temperature is not suitable for every hair type. If you plan

this straightener on the boost setting of 240ºC please test on a small

section of your hair rst.

To turn the turbo boost function o hold the ‘+’ button for a further 2 seconds and

the product will return to the previously set temperature.

, Temperature Lock Function

Set the desired temperature by pressing +/- buttons and lock the temperature

by pressing the ‘-‘ button for 2 seconds. A ‘padlock’ symbol will appear

next to the temperature.

To unlock the temperature controls, press and hold the ‘-‘ button again for 2

, Hinge Lock for Storage

The plates can be shut together for easy storage:

To lock, push the hinge lock up to the locked position.

To unlock, pull the hinge lock down to the unlocked position.

NOTE: Do not heat the unit in the locked position.

Each time you use the product it will automatically set to the last

temperature it was used on.

GBDNLFEIDKSFINPSKCZ HUN PLRUTRROGRSLAE HR6

C CLEANING AND MAINTENANCE

• Unplugtheapplianceandallowtocool.

• Wipeallthesurfaceswithadampcloth.

• Don’tuseharshorabrasivecleaningagentsorsolvents.

H ENVIRONMENTAL PROTECTION To avoid environmental and health problems due to hazardous

substances in electrical and electronic goods, appliances marked with

this symbol must not be disposed of with unsorted municipal waste, but

recovered, reused or recycled.

C FONCTIONS DU PRODUIT

73479 Ellwangen, Germany.

or one of its subsidiaries