TVLHD - Media player Fantec - Free user manual and instructions

USER MANUAL TVLHD Fantec

HD USB host player with LAN port for network stream playback

The Most Advanced Compression Technology H.264 The FANTEC TV-LHD features high compatibility with H.264(BP@L3, MP@4.0 and HP@4.0) which is the most advanced video compression technology, AVC (HD) and VC1. HD Playback (can support MKV) The FANTEC TV-LHD can playback high definition video (up to 1920x1080p) and images as wel. It can support various SD codec, such as MPEG1/2/4, Divx, and can also play some high definition format file, like TR, TP, TRP, asf, vob. The most important is that this device can support MKV files! Directly Network Playback (LAN 10/100mbps) The FANTEC TV-LHD supports streaming directly from Local area network, you can enjoy your favorite media files which are saved in your PC or LAN server and there is no need for copying files any more. HDMI With HDMI interface, you can enjoy unparalleled qualities of digital video and audio files and get out of trouble brought by all kinds of cables. Connecting to HD-TV becomes more easier by HDMI cable. USB Host Port With USB2.0 host port, you can enjoy media files from external USB device like a digital camera, USB flash drive, USB card reader or MP3 player as well as external hard drive NOTE: If you have to install hardware drivers for the devices under your operating system (OS), the compatibility between FANTEC TV-LHD and USB device can not be garantueed. DVD Juke Box You can create your own virtual DVD library by storing your private collection of DVDs in .ISO or .IFO format and watch them exactly as if they were running on a common DVD player (all original features included: Menu, Chapter, Audio Stream, Subtitle, Fast Forward, Rewind, Slow, Pause, Step Forward, Repeat, Search, etc.). Playback jpeg Format It’s possible to display High Definition and huge image files of a digital camera. F/W Upgradable You can easily upgrade the firmware.FANTEC TV-LHD

This player’s design and manufacture has your safety in mind. In order to safely and effectively use this player, please read the following before usage. Usage cautions User should not modify this player. If commercial hard disk is being used, the environmental temperature should be within +5° C ~ +35° C. Power The player’s power voltage: DC 5.5V. When using this player, please connect the supplied AC adapter or AC adapter cable to the player’s power jack. When placing the adapter cable, make sure it can not get damaged or be subject to pressure. To reduce the risk of electric shock, unplug the adapter first before cleaning it. Never connect the adapter to the player in a humid or dusty area. Do not replace the adapter or cable’s wire or connector. Radio interference/compatibility - If not properly shielded, almost all electronic devices will get radio interference. Under some conditions, your player might get interference. - The design of this player has followed the FCC/CE standard, and has followed the following rules: (1) This player may not cause harmful interference; (2) This player could accept some interference received including interference that may cause undesired operation. Repair If the player has a problem, you should take it to an appointed repair center and let the specialists do the repair, never repair the player yourself, you might damage the player or endanger yourself or your data. Disposing of the player When you dispose of the player, be sure to dispose it appropriately. Some countries may regulate disposal of electrical device, please consult with your local authority.FANTEC TV-LHD Others When using this player, please do not let the player come into contact with water or other liquids, if water is accidentally spilled on the player, please use a dry cloth to absorb the spillage. Electronic products are vulnerable, when using please avoid shaking or hitting the player, and do not press the buttons too hard. Do not let the player come into contact with water or other liquids. Do not disassemble the player, repair the player or change the design of the player, any damage done will not be included in the repair policy. Do not press the buttons of the player too hard. Avoid hitting the player with hard object, avoid shaking the player, and stay away from magnetic fields.

During electrostatic discharge and the strong electromagnetic field, the product will malfunction, then unplug the power cable and the product will return to normal performance next time it is powered on.FANTEC TV-LHD

TV-LHD Remote Controller Battery A/V Cable

Power Adapter User GuideFANTEC TV-LHD 4-3 Part Descriptions Product part Function Description Power Input Connect the provided power adapter to this interface (DC 5.5 V/3A) USB HOST Port An external hard disk drive, external optical disk drive, memory stick etc. can be connected to this port. HDMI Output The product can be connected to a digital TV with a HDMI cable. COAXIAL Digital Audio Output You can enjoy 5.1 Channel sound by connecting the product to a home theater amp or receiver using a coaxial cable. OPTICAL Digital Audio Output You can enjoy 5.1 Channel sound by connecting the product to a home theater amp or receiver using an optical cable. Composite Video Output You can use composite cable (A/V cable) is to connect this interface to a TV. Stereo Audio Output You can use composite cable (A/V cable) is to connect this interface to a TV.

5-1 LAN Cable connection between PLAYER and a PC

1. Connection to a PC

For the connection to a hub / switch or internet router, use a direct cable. Connect the LAN port of the PLAYER to a LAN port of the hub by the use of a LAN cable.FANTEC TV-LHD 5-2 Network-based Data Sharing with a PC

1. Data Sharing setup for Window 98 / ME

[1]. Select a folder you want to share and select “Sharing” menu using the mouse right button.

[2]. Enable “Sharing” and type “[Share Name]. For example my movie”.

1. “Share name” should be less than 12 letters.

2. Set Access Type to Read-Only.

3. Do not give passwords

10FANTEC TV-LHD [3]. If the folder is shared, you will see a hand mark on the folder icon. My Movie [4]. Go to “Control Panel-Network” and ,among the displayed items, select “ TCP/IP-LAN card name ”

WARNING If your PC already has “Obtain IP address automatically ” enabled and the IP is automatically assigned from an internet router or DHCP server, you may not need this setup. If you want this IP setup, please obtain an available IP address and subnet mask from the router or network administrator. 11FANTEC TV-LHD [6]. Configure PLAYER’s network environment. After pressing “SETUP” button, select “IP SETUP” among the “NETWORK” setup items and IP address and subnet mask. For example) IP Address : 192.168.1.10 / Subnet Mask : 255.255.255.0

After finishing the setup, save the setup value by pressing the “Setup” button once again WARNING If IP address of your PC is automatically assigned by an internet router or DHCP server, you may not need this setup. In this case, set “IP SETUP” to Auto. Then the IP will be automatically assigned. If you want a manual setup, please obtain an available IP address and subnet mask from the router or network.

2. Data sharing setup for windows2000

[1]. Select a folder your want to share and select “Sharing” menu using the mouse right button

[2]. Check “Sharing” and type “Share Name” Ex) My Movie WARNING Share Name” should be less than 12 letters. 12FANTEC TV-LHD [3]. In the above screen, click on “Permissions” and check, if an everyone account exists. If not, add one by clicking on “Add” button.

WARNING Set permissions to Read- Allow.

[4]. If the folder is shared, you will see a hand mark on the folder icon. MY Movie [5]. Go to “Control Panel—Administrative Tools—Computer Management—Local Users and Group” and, among the displayed items, double –click the Guest item.

13FANTEC TV-LHD [6]. After enabling “User cannot change password” and “Password never expires”, keep the other checkboxes unchecked. Then click on “OK”.

[7]. Go to “Control Panel—Network and Dial up Connections”. Select “Local Area Connection” and open its property window by using the mouse right button and selecting “Properties”.

WARNING If there are more than two “Local Area Connections”, select the LAN card that is connected to the PLAYER. 14FANTEC TV-LHD [8]. Among the displayed items, double-click “Internet Protocol(TCP/IP)”.

[9]. After checking “Specify an IP address”, Enter your IP address and subnet mask. Then click on “OK”. Ex) IP address :192.168.1.3 / Subnet Mask: 255.255.255.0

WARNING If your PC already has “Obtain IP address automatically” enabled and the IP is automatically assigned from an internet router or DHCP server, you may not need this setup. If you want a manual IP setup, please obtain an available IP address and subnet mask from the router or network administrator. 15FANTEC TV-LHD [10]. Configure PLAYER’s network environment. After pressing “Setup” Button, select items and set this to manual setup. Then enter your IP address and subnet mask. For example) IP Address : 192.168.1.10 / Subnet Mask: 255.255.255.0 After finishing the setup , save the setup value by pressing the setup button once again.

[1]. Select a folder your want to share and select “Sharing and security” menu using the mouse right button.

[2]. Checking “Sharing this folder on the network” and type “Share Name”. MY Movie

WARNING “Share Name” should be less than 12 letters. [3]. If the folder is shared, you will see a hand mark on the folder icon MY Movie [4]. Go to “Control Panel –Administrative Tools –Computer Management –Local Users and Group ” and, among the displayed items, double –click the Guest item.

WARNING The permission setting is only required for Windows XP Pro users. If you are an XP home user, go to “6” directly. If you cannot see the “Administrative Tools”, click on “Switch to Classic view” on the left corner. 17FANTEC TV-LHD [5]. After checking “User cannot change password” and “Password never expires”, keep the other checkboxes unchecked. Then click on “OK”.

[6]. Go to “Control Panel—Network Connections”. Select “Local Area Connections” and open its property window by using the mouse right button and selecting “Properties”.

WARNING If you cannot see the “Network connections”, click on “Switch to Classic View” on the upper left corner If there are more than two “Local Area Connections”, Select the LAN card that is connected to the PLAYER.

After checking “Specify an IP address” enter your IP address and subnet mask. Then click on “OK”. For example) IP address: 192.168.1.3 / Subnet Mask: 255.255.255.0. WARNING If your PC already has “Obtain IP address automatically” enabled and the IP is automatically assigned from an Internet router or DHCP server, you may not need this setup. If you want a manual IP setup, please obtain an available IP address and subnet mask from the router or network administrator. On the following screen, click on the “Advanced” tap. If the “Internet Connection Firewall” option is checked, cancel this option NOTE If you are using Service Pack 2, consult the figure below. In the “Window Firewall” Section, click on “Settings”.

19FANTEC TV-LHD After selecting off, click on “OK”.

[8]. Configure PLAYER’s network environment. After pressing “Setup” button, select “IP SETUP” among the “NETWORK” setup items and set this to manual Setup. Then enter your IP address and subnet mask. For example) IP address:192.168.1.10 / Subnet Mask: 255.255.255.0.

lFANTEC TV-LHD Power Turn on or Turn off power Setup Press this button, to enter Setup menu, or finishing setting up. Lang Press this button, to selet the OSD language. Picture Adjusts the brightness, contrast, and color. It selects a picture property according to the following order. (Brightness -> Contrast -> Color) Change the value of each property by using the left and right arrow button. TV out You can change different TV output mode. HDMI or A/V out. Play Start Playback or pause.

Move up and down between different options or items. DOWN Left Move back the main option or move left in setup mode. right Move right in setting up mode, to choose the right mode. Stop Stop the currently played file or go back to upper menu (Return)

Confirm your selection or setting.

Skip forward to next track or media file.

Skip backward to previous track or media file.

Forward or backward search of the current movie. (Each click doubles up the search speed: 2, 4, 8, 16 and 32 fold).

Volume down. Mute Press this button to disable or enable audio output. Goto Jump to the desired position of movie during playback. 22FANTEC TV-LHD B. Mark Supports two types: stopped points and bookmarked points (up to 9 in order). Audio Selects a specific audio source when multiple audio sources exist in a movie file. INFO Displays the information of a played file. Repeat Click once, it would repeat one track, click twice, it would loop all files i n the same folder, click 3 times, repeat function is turned off. SUB-T Selects a specific subtitle file in playback mode, if supported subtitles ar e available.

7-1 Connection with A/V (Composite) TV output

Connect the PLAYER and your TV with HDMI cable, Turn on the PLAYER and your TV, please confirm your TV is in HDMI mode, then set the PLAYER to HDMI mode by pressing “TV out” button on the remote controll until the picture appears. Connect the Player and your TV using the yellow video (A/V) cable. Turn on the player and TV. Select appropriate video input mode on your TV until you can get the initial player screen.FANTEC TV-LHD 7-3 Connection with 2 Channel of Cinch Audio

7-4 Connection with Coaxial output

Connect red and white audio (A/V) cable from FANTEC TV-LHD to the audio input jack of TV or audio device. When you have a multi channel decoder/amplifier with coaxial input, you can enjoy 5.1CH high quality sound through coaxial cable. The illustration on the top shows how to connect with coaxial cableFANTEC TV-LHD 7-5 Connection with Optical output

When you have a multi channel Decoder /amplifier with optical input, you can enjoy 5.1CH high quality sound through optical cable. The illustration on the top shows how to connect with optical cable.FANTEC TV-LHD

The figure below is the PLAYER’s SETUP screen

Under this option you can set your Audio output by choosing ‘Analog’ (Analog 2 channel audio output) or ‘Digital’ (Digital audio signals through the optical or coaxial output).

You can choose among following options to find your desired TV display. z 4:3 letterbox: This aspect ratio displays the content based on its horizontal length. Black horizontal bars are placed by the PLAYER at the top and bottom of the screen to be displayed in a wide mode. z 4:3 Pan-scan: This aspect ratio displays the content based on its vertical length. It fills up the screen, but some parts of the left and right side of the image are lost. z 16:9: Image output in the aspect ratio of 16:9.

Your can choose PAL or NTSC TV output systems.

You can choose proper TV output among following options: z HDMI z C/S Video = A/V out When you change TV output, there would be a window for confirmation comes out. Choose ‘Yes’ to continue output changing, choose ‘No’ to cancel output changing. NOTE: Once you choose TV output, change your TV setting accordingly. For example, if you choose HDMI as TV output, then you also need choose ‘HDMI’ output accordingly.

5. HDMI output setting

When you choose HDMI output, following 6 resolution are available. z 576i z 576p z 720p z 1080i z 1080p

28FANTEC TV-LHD 8-2 ETC Enhanced Technical Calibration

You can choose proper language with this option. There are English, Italiano, Espanol, Russky, Francais, Deutsch, Czech, Portugues, Korean, and Simple Chinese available at this moment.

Select a subtitle size among small-subtitle, Big-subtitle, and No-subtitle. NOTE: DVD subtitles are not adjustable.

You can set different subtitle color when use this function by choosing from W/K (White/Black), Y/K (Yellow/Black), C/K (Cyan /Black), W/B (White/Blue), Y/B (Yellow/Blue), C/B (Cyan/Blue) picture as following. NOTE: DVD subtitles are not adjustable.

4. Slide Show Timeout

You can set picture slide show interval time by using this function. When you choose ‘slide show’, a time window comes out and you have o enter the time you want. Finally press ‘down arrow’ to confirm or cancel the settings. You can set interval time between “03” and “99” seconds. To STOP the slideshow, please press “OK” button during picture playback.

With this function, you can reset your player’s system setting to factory setting or your latest setting. When you choose “Factory” or “User” , there would be a confirmation window comes out for confirmation and the player has to be powered off when reset is confirmed. 29FANTEC TV-LHD 8-3 Network

You can configure your local network by ‘Auto’ or by ‘Manual’. When you choose ‘Auto’, the player would search the local network to get a IP assigned by DHCP server and connect it automatically. If you want set LAN manually, you need to give the player a fixed ‘IP’ and ‘NetMask’ address and the player would connect accordingly to this setting. 8-4 Exit Choose this option to go back to player’s main page. 30FANTEC TV-LHD

Icons and Screen Components

If you select this option, the player will search and display all available PCs, that have shared folder(s) in your local area network. See [Network- based Data Sharing] for more detail about data sharing setting.

If you select the option of USB Disk Selection, the player will search and display USB devices that are connected via the backside USB HOST port. You can play media files from an eternal HDD, optical drives, pen drive, etc. NOTE: If you have to install hardware drivers for the devices under your operating system (OS), the compatibility between FANTEC TV-LHD and USB device can not be garantueed.

You can setup video output, proper language, subtitles, slide effect, LAN etc. decribed under point no. 8 “Setup Menu”.FANTEC TV-LHD

Buttons and Function for movie playback Remote Button Function Description AUDIO Multiple Audio Selection Selects a specific audio source when multiple audio sources exist in a movie file. INFO File Info Display Displays the information of a played file. B.MARK Continuous Play Support two types: stopped points and bookmarked points (up to 9 in order) VOL Volume Adjust Adjusts volume. MUTE Sound Mute Enables/ disables sound. Remote Button Function Description GOTO Instant Jump Jumps to a desired time position during the playback. After entering a time a value using the arrow buttons or number buttons, press the (OK) button.

Playing a selected file Play a selected file. ARROW BUTTONS Up/Down Changing the position of a subtitle Left/Right Forward or backward search of the current movie. PLAY Start/Pause Start or pause the playback. STOP Stop Stop the current playback. Prev. Folder To move to upper-level folder on a file list. SKIP

Next/Prev. File Jumps to a next or previous file during playback.

Next/Prev. Page When used on a file list screen, it jumps forward/ backward to different pages SEARCH

Quick Search Forward or backward search of the current movie (Each click doubles up the search speed -2, 4, 8, 16 and 32 fold). The Player can play the following files: AVI, DAT, ISO, MKV, MPG, MPEG, TP, TRP, VOB, WMV etc. Playback order and method are determined by the selected repeat mode.FANTEC TV-LHD

Buttons and Function for music playback Remote Button Function Description BOOKMARK Continuous Play Support two types: stopped points and bookmarked points(up to 9 in order). VOL Volume Adjust Adjusts volume. MUTE Sound mute Enables/ disables sound.

Playing selected file Play a selected file. PLAY Start/Pause Start or pause the playback. STOP Stop Stop the current playback. Prev. Folder To move to a upper-level folder on a file list. SKIP Next/Prev. File Stop the current playback. Next/Prev. Page When used on a file list screen, it jumps forward/ backward to different pages. ARROW BUTTONS Up/Down File navigation during playback. Left/Right Jumping forward/ backward by 15 seconds. During playing music files, the system is in the music playback mode. During playing music files, you can search folders and files. After selecting a new file and pressing the “OK” button, the selected file will be played.FANTEC TV-LHD

Buttons and Function for photo playback Remote Button Function Description

Playing a selected file Play a selected file. PLAY Start/Pause Starts or pause the playback. STOP Stop Stop the current playback. SKIP

Prev. Folder To move to a upper-lever folder on a file lst. Next/Prev. File Jumps to a next file during playback. Next/Prev. Page When used on a file list screen, it jumps forward/ backward to different pages. JPG files can be played. The Player also provides a slideshow function. The display duration or each picture can be set in the SETUP menu.FANTEC TV-LHD

1. The latest firmware can be downloaded from www.fantec.eu1. The latest firmware can be downloaded from

2. Copy the latest firmware to an external storage device.

3. Connect the external storage device to your FANTEC TV-LHD, select the firmware file using the

remote control and press “OK” button to start the upgrade.

4. If a firmware warning screen appears, initiate the firmware upgrade by selecting “OK”

The firmware of the Player will is upgradedable in order to bug fix and to satisfy customers need. The current version of a firmware is shown on the right upper corner of the SETUP screen.FANTEC TV-LHD

5. The firmware upgrade is in progress.

6. When the firmware upgrade is successfully completed, the system will be automatically rebooted.

Warning During firmware upgrade process , do not turn off the power or disconnect the adapter. 36FANTEC TV-LHD

When the power is on, nothing appears on the screen or the screen is flickering? When the video output mode is not properly set, nothing may appear on the screen, the screen may be in monochrome, or the screen may be flickering . Press “TV OUT” button of the remote control and change the output mode until the video output mode is properly set. The Player is PAL or NTSC mode, Please check the TV Output (NTSC/PAL). When the player is powered on, why will the TV have a short flashing, blue screen or screensaver? This is normal, when the system initializes, it will setup the corresponding parameters so it can output the correct video signal to the TV, during the initializing time, the TV will receive incorrect signals or the signals will not be stable and will cause the TV screen to flash, some TV’s will treat this as no signal, and will display a blue screen or screensaver. While playing a movie file, its subtitle is not shown? The name of a movie file has to match to the name of a subtitle file or reverse. In the case of multiple subtitles, if there is no first subtitle, subtitle cannot be shown. In this case, using the [SUB-T] button, select the second subtitle file. While playing a movie, there is no audio output? In the SETUP menu, check if the audio output mode is properly set. Check the volume level. Check if the [MUTE] function is activated. USB device is not supported? If you have to install hardware drivers for the devices under your operating system (OS), the compatibility between FANTEC TV-LHD and USB device can not be garantueed. Can the player access to the USB host port when it’s connected to PC? No, it can’t. Why do some photo formats, cannot be shown in the photo function? In the JPEG format there are different modes. The player doesn’t support all the modes. So you have to change your photo format first as follow: (1) Use Photoshop to open the photo. (2) Choose ”File” then “save as” from the menu, as the picture on the left hand side shows, select the picture format as JPEG, input the file name and click the “save” icon.FANTEC TV-LHD (3) After click on the “save” icon, a new window will appear as the picture on the right hand side shows, select “Baseline (standard)” or “Baseline optimized”. (4) Click the “OK” icon. Why when I switch to 480P, 576P, 720P, 1080I or 1080P does the TV screen display an unwatchable picture? Please check if your TV supports 480P, 576P, 720P, 1080I or 1080P output, if your TV does not support, please use the A/V signal display instead, press the TV OUT button on the remote control, then switch the TV’s video input to NTSC or PAL. I configured everything correctly, but still cannot get the network connected? Are you using a firewall such as Norton Internet Security, McAfee Personal Firewall, Zone Alarm, etc. or even the built-in firewall of Windows XP? (Don’t forget that Service Pack 2 for Windows XP or Vista automatically upgrades your firewall and turn it on by default).

If you have a firewall, it may need to be configured or have exceptions created to allow you to see and communicate with the player on the network. To test if your firewall is preventing network communication (including PING and access shared folders), try disabling it to see if you can connect. If you can connect with the firewall disabled, you may need to add the player to the ‘Trusted’ list or configure the firewall for local intranet access. Worst-case, disable your firewall long enough to use the player, then enable it again when done.FANTEC TV-LHD

Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.FANTEC TV-LHD

For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License applies to any program or other work which contains a notice placed by the copyright

holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any

medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.FANTEC TV-LHD

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on

the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.FANTEC TV-LHD

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or

executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this

License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants

you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms andFANTEC TV-LHD

conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically

receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not

limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by

copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public LicenseFANTEC TV-LHD

from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions

are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY