C420S1 - Surveillance Camera TP-LINK - Free user manual and instructions

USER MANUAL C420S1 TP-LINK

Sounding Alarm Tap to silence hub Connected Devices

< Share Device Invite your family members to manage the Tapo device together.

Authentification FCC compliance information statement

Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 926181 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@ tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures: + Reorient or relocate the receiving antenna. + Increase the separation between the equipment and receiver. + Connectthe equipment into an outlet on a circuit different from that to which the receiver is connected. + Consultthe dealer or an experienced radio/ TV technician for help. (2

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1. This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCCRF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2022-08-16 FCC compliance information statement Product Name: AC ADAPTER Model Number: T090085-2B1 Product Name: USB ADAPTER Model Number: A8-501000 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 926181 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234

Fax: +1 909 527 6804 E-mail: sales.usa@ tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures: + Increase the separation between the equipment and receiver. + Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. + Consultthe dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. O peration is subject to the following two conditions:

1. This device may not cause harmful interference.

2.This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2022-08-16

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz—2472MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/ RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.

UK Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/ Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-

exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

HIT Restricted substances and its chemical symbols Et * Er NE: DU ES HCFR Unit Lead Mercury |Cadmium| Hexavalent chromium Polybrominated biphenyls Polybrominated diphenyl ethers (Pb) (Hg) (Cd) (Crss) (PBB) (PBDE) [e) [e] [e) Le] [e) [e] [e) [e] [e) Le] [e) [e] — [e] [e) Le] [e) [e] — [e] [e) Le] [e) [e]

RS 1. SE 0.1 wt%” 3 VE 0.01 wt%” (EIRE ZA DEL É NE TER RE lÉ Note 1 : “Exceeding 0.1 wt %” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 8 2. Vo? (SSII ZE DIRE REHE DER EEARRTE « Note 2 : “o” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

PE 3. NT (RÉSUMÉ SERRE <

Note 3 : The “—” indicates that the restricted substance corresponds to the exemption.

Safety Information + Do notuse damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended. - Do notuse the device where wireless devices are not allowed. - Adapter shall be easily accessible. + Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us. + Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid. + Do not disassemble, repair or modify the product. + Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident. + Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.

+ Do notuse liquid to clean the product. Only use a dry cloth. + Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician. - This product is not intended to be used when providing medical care. Consultthe manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy. + Do notuse this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. + Do not place heavy objects on top of the product. + When you leave the product unused for a long time unplug the product from the power outlet. + Productshould be kept away from heat sources such as radiators, cookers etc. - it should not be placed in places where the temperature is less than -20 degrees or greater than 45 degrees. + This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices. - Always follow the local waste and recycle laws when you get rid of the used battery. CAUTION! Risk of fire or explosion ifthe battery is replaced by an incorrect type ° CAUTION! Avoid replacement of a battery with an incorrect type thet can defeat a safeguard Avoid disposal of a battery into fire or a hot oven, or mechenically crushing or cutting of a battery, that can result in an explosion. Do not leave à battery in an extremely high temperature surrounding environment hat can result in an explosion or the leakage of flammable liquid or gas: Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammeble liquid or gas. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation ofthe symbols on the product label Symbol Explanation DC voltage Indoor use only

RECYCLING This productbears the selective sorting symbol forWaste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantied to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.