FS-1061DN - Laser printer KYOCERA - Free user manual and instructions

USER MANUAL FS-1061DN KYOCERA

Exterior view of a Kyocera printer with control panel and display screen (no visible text or symbols on the device itself)

Préface

Diagram of a printer with barcode scanner and label pointing to it, showing internal structure and file path.

Safety Instructions Regarding the Disconnection of Power 1-7

Compliance and Conformity 1-7

Other precautions (for users in California, the United States) 1-7

Warranty (the United States and Canada) 1-8

Wireless Connection (Mexico only) 1-9

Programme Energy Star (ENERGY STAR®) 1-18

Envoi personnel (E-mail) 5-29

Application (page 5-12)

Safety Instructions Regarding the Disconnection of Power 1-7

Compliance and Conformity 1-7

Other precautions (for users in California, the United States) 1-7

Warranty (the United States and Canada) 1-8

Wireless Connection (Mexico only) 1-9

Programme Energy Star (ENERGY STAR®) 1-18

Avis

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

SAFETY OF LASER BEAM (USA)

1. Safety of laser beam

This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape.

2. The CDRH Act

A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States. On this machine, the label is on the rear.

ECOSYS M6230cidn MFP ECOSYS M6235cidn MFP ECOSYS M6630cidn MFP ECOSYS M6635cidn

3. Maintenance

For safety of the service personnel, follow the maintenance instructions in the other section of this manual.

4. Safety switch

The power to the laser unit is cut off when the front cover is opened.

Safety Instructions Regarding the Disconnection of Power

Compliance and Conformity

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter.

* The above statements are valid only in the United States of America and Canada.

NOTE — Use shielded interface cables.

Other precautions (for users in California, the United States)

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Warranty (the United States and Canada)

ECOSYS M6230cidn / M6235cidn / M6630cidn / M6635cidn COLOR MULTIFUNCTIONAL PRODUCT LIMITED WARRANTY

KYOCERA Document Solutions America, Inc. and KYOCERA Document Solutions Canada, Ltd. (both referred to as "KYOCERA") warrant the Customer's new color Multifunctional Product (referred to as "MFP"), and the new accessories installed with the initial installation of the MFP, against any defects in material and workmanship for a period of one year, or 200,000 copies/prints from date of installation, whichever first occurs. In the event the MFP or an accessory is found to be defective within the warranty period, KYOCERA's only obligation and the Customer's exclusive remedy shall be replacement of any defective parts. KYOCERA shall have no obligation to furnish labor.

This warranty is valid only for the original retail purchaser (referred to as the "Customer") of a new KYOCERA MFP in the United States of America or Canada, based upon the country of purchase.

In order to obtain performance of this warranty, the Customer must immediately notify the Authorized KYOCERA Dealer from whom the product was purchased. If the KYOCERA Dealer is not able to provide service, write to KYOCERA at the address below for the name and address of the Authorized KYOCERA Dealer in your area, or check KYOCERA's website at http://www.kyoceradocumentsolutions.com/us for KYOCERA Document Solutions America, Inc. or http://www.kyoceradocumentsolutions.ca for KYOCERA Document Solutions Canada, Ltd.

This warranty does not cover MFPs or accessories which: (a) have become damaged due to operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b) have used parts or supplies which are not genuine KYOCERA brand parts or supplies, (c) have been installed or serviced by a technician not employed by KYOCERA or an Authorized KYOCERA Dealer, or (d) have had the serial number modified, altered, or removed.

This warranty gives the Customer specific legal rights. The Customer may also have other rights, which vary from state to state, or province to province. Neither the seller, nor any other person, is authorized to extend the time period or expand this warranty on behalf of KYOCERA.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE OF, OR INABILITY TO USE, THE MFP.

KYOCERA Document Solutions America, Inc.

225 Sand Road, P.O. Box 40008

Fairfield, New Jersey 07004-0008, USA

KYOCERA Document Solutions Canada, Ltd.

6120 Kestrel Rd., Mississauga, ON L5T 1S8, Canada

Wireless Connection (Mexico only)

The operation of this equipment is subject to the following two conditions:

(1) it is possible that this equipment or device may not cause harmful interference, and (2) this equipment or device must accept any interference, including interference that may cause undesired operation.

Sólo México (Mexico only)

Copyright (c) 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

Copyright (C) 1995-1998 Eric Young ([e-mail]) All rights reserved.

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([e-mail])" The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Knopflerfish License

This product includes software developed by the Knopflerfish Project.

http://www.knopflerfish.org

Copyright 2003-2010 The Knopflerfish Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the KNOPFLERFISH project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache License (Version 2.0)

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

1. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
2. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
3. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a)You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

1. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
2. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
3. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
4. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
5. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Programme Energy Star (ENERGY STAR®)

ENERGY STAR

Command Center RX 2-54

Diagram showing printer operation with a highlighted internal component and directional arrow indicating assembly or connection.

Diagram showing a printer file being inserted into a device, with a close-up view highlighting the internal component (no text or symbols present)

Diagram showing a device with an attached plug and a labeled connector, likely illustrating a cable or connection mechanism.

IMPORTANT

Diagram of a printer front panel with a circular icon highlighting the power button (no text or symbols present)

IMPORTANT

Diagram of a printer's side panel with a circular button labeled 'Power' pointing to it, showing no text or symbols beyond the icon.

Aff.mess. mise hrs tens. (page 8-21)

Diagram showing printer assembly steps with numbered instructions for file handling and print handling

Écran tactile

Écran d'accueil

→ Réseau principal (client) (page 8-42)

Illustration of a hand holding a CD next to a laptop displaying a blank screen with a small diagram (no text or symbols)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols visible)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols visible)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

REMARQUE

Illustration of a hand holding a CD on a laptop screen, with no visible text or symbols.

Illustration showing two hands exchanging a closed book and a closed book, with arrows indicating motion (no text or symbols)

Technical line drawing of a device casing and chassis assembly, showing internal components and a directional arrow (no text or symbols)

REMARQUE

Technical diagram of a mechanical assembly with labeled parts and directional arrows indicating movement or assembly.

Technical diagram showing a mechanical assembly with labeled parts and directional arrows indicating movement or assembly.

Mechanical assembly diagram showing a piston inside a frame with directional arrows indicating motion (no text or symbols)

REMARQUE

Diagram illustrating a printer setup with labeled components and directional arrows, including a 'No' symbol indicating no change.

IMPORTANT

Diagram of a printer or printer casing with a blue base and arrow pointing to the front panel (no text or symbols present)

REMARQUE

Diagram of a device with a zoomed-in inset showing a blue rectangular component (no text or symbols)

Illustration of a printer with an arrow pointing to the paper sheet (no text or symbols present)

Illustration of a printer with an open lid and paper tray, showing internal components and a close-up inset of the printer's edge detail (no text or symbols present)

Illustration of a printer with a blue arrow indicating a process or operation, no text or symbols present.

Recycle Bin scanncerdata

Envoi personnel (E-mail) 5-29

Diagram showing hands operating a printer with labeled parts, highlighting part 2 as an eye.

Diagram illustrating a printer setup with labeled parts and a hand inserting a paper into an open scanner, accompanied by a diagram showing document layout.

Illustration of a printer with paper feed and paper tray, showing internal components (no text or symbols)

Illustration of a printer with an arrow indicating left-side paper feed (no text or symbols present)

REMARQUE

Illustration of a printer with paper being inserted, showing internal structure and page layout (no text or symbols)

Illustration of a printer with paper feed and a blue plastic clip being inserted (no text or symbols)

Illustration of a printer with paper feed and paper tray, showing internal components (no text or symbols)

ECOSYS M6235cidn/ECOSYS M6635cidn :

A4, Letter, Legal

Illustration of a printer with a paper feed being inserted, showing internal components and a blue plastic clip (no text or symbols)

Favoris

3 Activer/désactiver l'application.

Illustration of a printer with an arrow indicating a document or file transfer (no text or symbols present)

Illustration of hands operating a printer with an open lid (no text or symbols visible)

graph TD
    A["Input Image"] --> B["Edit Box"]
    B --> C["Email"]
    C --> D["Computer Screen"]
    D --> E["Send Email"]
    E --> F["Send Email"]
    F --> G["Send Email"]
    G --> H["Send Email"]
    H --> I["Send Email"]
    I --> J["Send Email"]
    J --> K["Send Email"]
    K --> L["Send Email"]
    L --> M["Send Email"]
    M --> N["Send Email"]
    N --> O["Send Email"]
    O --> P["Send Email"]
    P --> Q["Send Email"]
    Q --> R["Send Email"]
    R --> S["Send Email"]
    S --> T["Send Email"]
    T --> U["Send Email"]
    U --> V["Send Email"]
    V --> W["Send Email"]
    W --> X["Send Email"]
    X --> Y["Send Email"]
    Y --> Z["Send Email"]

graph TD
    A["Document Image"] --> B["Printer"]
    B --> C["Computer Interface Icon"]

Illustration of a printer with an arrow indicating a document or file transfer (no text or symbols present)

Illustration of hands operating a printer with open lid (no text or symbols)

Envoi personnel (E-mail)

Illustration of a printer with an arrow indicating a document or file transfer (no text or symbols present)

Illustration of hands operating a printer with open lid (no text or symbols visible)

3 Afficher l'écran.

Illustration of a printer with an arrow indicating a loading or movement (no text or symbols present)

Illustration of hands operating a printer with an open lid (no text or symbols visible)

Illustration of a printer with an arrow indicating a document or scroll, no text or symbols present

Illustration of hands operating a printer with open lid (no text or symbols visible)

2 [Menu] > [Envoyer]

REMARQUE

Illustration of a printer with an inset showing a close-up of its internal components (no text or symbols present)

Illustration of a printer with an arrow indicating a file or print operation (no text or symbols present)

Illustration of hands operating a printer with open lid (no text or symbols visible)

2 Brancher la mémoire USB.

Illustration of a printer with an inset showing a close-up of the device (no text or symbols present)

2 [Menu] > [Retirer mémoire]

Diagram of a printer or printer with an open lid and directional arrow indicating orientation (no text or symbols present)

graph LR
    A["ID card with user profile icon"] --> B["Document layout with two user profiles"]

Format d'originaux

A4 (Letter)

Assembler

graph LR
    A["Star Rating"] --> B["Rating"]
    B --> C["1-Star Rating"]

Image de l'original

Two identical leaf icons with white vein patterns, one green and one light green, connected by a red arrow (no text or symbols)

Sélection couleur

Autumn landscape with red, yellow, and green foliage beside a riverbank under a clear blue sky (no text or symbols visible)

Original

Autumn landscape with vibrant red, yellow, and green foliage beside a stream (no text or symbols visible)

Plus magenta

Autumn landscape with red and orange foliage, rocks in foreground, no visible text or symbols

Colorful paperclip samples arranged in a pile (no text or symbols visible)

Original

Colorful paperclip samples arranged in a circular pattern on a white background (no text or symbols)

Plus net

Colorful paperclip samples arranged in a pile on a white background (no text or symbols visible)

Child walking with a colorful balloon in a green field under a blue sky (no text or symbols)

Original

Child running with a colorful balloon in the green field under a blue sky with clouds (no text or symbols)

Plus élevé

Child running on a green field holding colorful balloons against a blue sky with clouds (no text or symbols)

Row of colored pencils in gradient shades from blue to pink (no text or symbols visible)

Row of colorful pencils in a gradient color scheme (no text or symbols visible)

Vif

Row of colorful pencils in blue, yellow, cyan, green, and red hues against a white background (no text or symbols)

graph LR
    A["1: Document Review with stars"] --> B["2: Questionnaire with stars"]
    B --> C["3: Final Output with red dot"]

REMARQUE

Aff.mess. mise hrs tens.

Touche [Menu Système/Compteur] > [Param. communs] > [Aff.mess. mise hrs tens.]

Configurer Wi-Fi Direct.

REMARQUE

Réseau principal (client)

Illustration of a hand inserting a component into an open printer (no text or symbols visible)

Illustration of a hand using a handheld tool to clean or print a document inside an open printer (no text or symbols visible)

Verre fendu

Illustration of a printer with a paper airplane being inserted, showing internal components and a downward arrow (no text or symbols)

2

Illustration of a printer with a close-up view showing a blue object inside (no text or symbols present)

3D diagram of a printer internal structure with an arrow indicating a component (no text or symbols present)

3

K M C Y

Mechanical assembly diagram showing a blue plastic component inserted into a housing (no text or symbols visible)

4

Diagram of a blue mechanical component with internal channels and a black arrow indicating a specific section (no text or symbols present)

5

graph TD
    A["3D Component"] --> B["Assembly"]
    B --> C["Final Assembly"]

IMPORTANT

Technical diagram showing assembly of a mechanical component with labeled parts and no-handled hand signals

6

5~6

7

Diagram of a vehicle's internal components, showing a loading or assembly inside a container with an arrow indicating direction (no text or symbols present)

8

Diagram of a printer internal structure with an inset showing the printer's internal panel and lock mechanism (no text or symbols present)

9

Illustration of a printer's internal structure with a black arrow indicating the process (no text or symbols present)

REMARQUE

Diagram showing a device being inserted into a housing, with an inset close-up of the component (no text or symbols present)

2

Diagram showing a printer or printer with a plastic bag inserted, and an inset view of a printer's internal components (no text or symbols present)

Illustration of a blue mechanical component being adjusted, with an inset showing the same component (no text or symbols present)

3

graph TD
    A["Blue Container"] --> B["Red Arrow"]
    B --> C["Final Device"]

4

Diagram showing a blue bag inserted into a container with an arrow pointing to it (no text or symbols present)

Diagram showing a vehicle interior with a highlighted section and directional arrows, no text or symbols present.

5

Diagram showing a blue arrow pointing to a curved blue component on a gray structural element (no text or symbols)

REMARQUE

Diagram of a printer or printer with a paper feeding into a slot (no text or symbols visible)

Diagram of a printer's internal structure showing a blue device inserted into the main frame (no text or symbols present)

2

Diagram of a printer's internal structure showing a blue device inside the frame, with arrows indicating motion (no text or symbols present)

Illustration of a printer with a blue screen and arrow indicating a scroll (no text or symbols present)

Dépannage

Diagram illustrating a printer setup with upload, delete, and disassembly steps, including a 'No' symbol indicating no file.

IMPORTANT

Grid of colored squares arranged in four quadrants, each containing a black square and a corresponding color block.

4 Correction.

Diagram showing printer operation with color palette selection and directional arrow indicator

Diagram illustrating a printer setup with labeled components and warning symbols for file loss or invalid status.

IMPORTANT

Illustration of a printer being inserted into a paper sheet, showing the process (no text or symbols present)

2

Diagram illustrating the process of printer folding and reassembly, showing blue panel insertion and red arrow indicating rotation.

3

Diagram showing a device interior with labeled components and a red play button, no readable text or symbols present.

4

Pure technical diagram of a mechanical assembly without any text, numbers, or symbols

5

Diagram showing a device interior with a red arrow indicating a process or transformation, and an adjacent view of the printer casing (no text or symbols present)

6

Diagram illustrating printer printing process with zoomed-in view and paper feeding steps

Magasins 1 à 4

Illustration of a printer or printer with a blue tray and black arrow indicating motion (no text or symbols)

Line drawing of a printer or printer with a base tray and internal structure (no text or symbols)

2

Diagram of a printer or printer casing with a blue base and arrow pointing to the front panel (no text or symbols present)

Diagram showing a printer's internal structure before and after assembly, with no visible text or symbols.

ATTENTION

Diagram showing a printer's internal structure before and after assembly, with a blue arrow indicating the right-hand side.

3

Diagram showing a printer interior with a blue plastic tray and a red arrow indicating rotation (no text or symbols)

4

3D diagram of a mechanical component with a blue highlighted section and an arrow indicating direction (no text or symbols)

Capot arrière 2

1

Diagram showing a printer internal structure before and after processing, with no visible text or symbols.

REMARQUE

3D diagram of a container with an arrow indicating direction, no text or symbols present

3

3D diagram of a printer or printer interior showing a blue plastic tray with a blue arrow indicating the component (no text or symbols present)

Diagram of a printer's internal structure showing paper feeding into a printer (no text or labels)

4

3D diagram of a vehicle door frame with a blue highlighted lane (no text or symbols)

Capot arrière 3

1

Diagram showing a device interior with a blue mesh component being removed, labeled with arrows and a red triangle (no text or symbols present)

REMARQUE

3D diagram of a container with a blue arrow indicating a flow or direction, no text or symbols present

Capot arrière 1

1

Diagram showing a printer's internal structure being inserted into a device, with no visible text or symbols.

ATTENTION

Illustration of a printer with paper and print (no text or symbols visible)

3

A1

4

Diagram of a computer printer internal structure showing internal components and an arrow indicating a specific area (no text or symbols present)

5

A2 A2

Diagram of a printer's internal structure showing paper feeding into a tray (no text or symbols visible)

6

Illustration of a blue office machine with a white top and arrow indicating clockwise direction (no text or symbols)

Unité recto verso

1

Diagram showing a printer's internal structure being inserted into a device, with no visible text or symbols.

ATTENTION

Line drawing of a printer with paper and control panel (no text or symbols)

3

A1

4

Diagram of a printer's internal structure showing internal components and a paper airplane (no text or labels)

5

A2 A2

Diagram of a printer's internal structure showing paper feeding into a printing machine (no text or symbols visible)

6

A3

Diagram of a computer monitor with an open panel and a scroll wheel, showing internal components (no text or symbols)

7

Diagram of a server rack with internal components and an arrow indicating loading or movement (no text or symbols present)

8

Illustration of a printer with a blue cover and directional arrow symbol (no text or labels)

Illustration of a printer with paper being inserted (no text or symbols visible)

2

Illustration of a printer's internal structure showing paper feeding into a tray (no text or symbols visible)

Illustration of a printer's internal structure showing paper feed, paper tray, and printer casing (no text or symbols)

3

Diagram of a printer with labeled parts showing internal components and directional arrows

Illustration of a printer's internal structure showing internal components and a paper airplane (no text or symbols)

4

3D diagram of a mechanical component with an arrow indicating rotation or movement (no text or symbols present)

3D mechanical assembly diagram showing a clamping mechanism with an arrow indicating rotation (no text or symbols present)

5

Illustration of a device with internal components and a downward arrow indicating a process (no text or symbols present)

Illustration of a printer with a blue cover and arrow indicating compression or shift (no text or symbols present)

ECOSYS M6235cidn/ECOSYS M6635cidn
1

Illustration of a printer with a paper feed and a scroll, showing no text or symbols on the device itself.

2

Diagram of a printer's internal structure showing internal components and a blue cover (no text or symbols)

Diagram of a printer internal structure showing internal components and a paper feeding mechanism (no text or symbols)

3

Diagram of a printer's internal structure showing part opening and disassembly, with an inset illustrating the process (no text or symbols present)

▶

Diagram of a printer internal structure showing internal components and a black arrow indicating a component (no text or symbols present)

4

Illustration of a printer with a blue cover and a black arrow pointing to the top page (no text or symbols present)

Diagram of a printer with a blue arrow indicating a paper feed or print operation (no text or symbols present)

2

Diagram of a printer's internal structure showing a printer's opening and power button, with no visible text or symbols.

3

Illustration of a printer or printer with a blue screen and arrow indicating a scroll (no text or symbols present)

11 Annexe

Card Authentication Kit(B) Operation Guide

Illustration showing a hand holding a blue ruler with a red outline, alongside a magnified view of the ruler being cut off.

Diagram showing a printer's internal structure before and after assembly, with Chinese labels indicating component placement.

Diagram showing a printer's internal structure with two labeled steps (① and ②) indicating assembly or disassembly.

Diagram showing a printer with a power button and an electrical plug, illustrating the process from external to internal connection.

2 Retirer le capot.

Diagram of a device interior showing a blue plastic door with an arrow pointing to the door panel (no text or symbols present)

3 Retirer le capot.

Diagram of a printer's front panel showing a blue clip inserted into the base, with no visible text or symbols.

Diagram of a printer's front panel showing internal components and a blue folder with an arrow pointing to it (no text or symbols present)

Diagram showing a device with a control panel and cable, before and after assembly (no text or symbols)

Diagram showing a blue electrical plug inserted into a wall, with a red triangular play button and a magnified view of the power button inside the device.

Authentication locale 9-23

Autorisation code PIN 9-36

Connexion 2-22

Déconnexion 2-23

Impression 9-18

Application 5-12, 8-24

Applications en option 11-9

Assembler 6-15

Défaut 8-16

Support stockage 8-23

Suppr. stockage travaux 8-23

Boîte perso. 11-27

Boîte personnalisée

Card Authentication Kit 11-3

Cartouche de toner (Yellow) 2-5

Client SMB (transmission)

Command Center RX 2-54

Data Security Kit 11-7

Date/Heure 8-48

Conf. dest. avant envoi 8-22

EcoPrint 6-17, 11-28

Défaut 8-16

Imprimante 8-26

Enhanced WSD over SSL

FTP Client (transmission)

Monotype Imaging License Agreement 1-13

Mopria 4-8

Card Authentication Kit 11-3

Carte SD 11-6

Data Security Kit 11-7

Extension mémoire 11-4

Support Mode Auto 8-14

Type de support 8-14

Papier couché 11-21

Papier recyclé 11-21

Conf. dest. avant envoi 8-22

Diffuser 8-23

Action lect. CAD 8-22

Polices contour 11-28

POP3 11-29

Programme Energy Star (ENERGY STAR®) 1-18

Propriété util. 8-8

Q

RA (Stateless) 11-29

Paramètres 8-32

Raccordement

Câble réseau 2-8

Câble secteur 2-9

Câble USB 2-9

Raccourcis 5-15

Ajout 5-15

Réseau principal (client) 8-42

Réseau sans fil

Réseau principal (client) 8-42

Wireless Connection 1-9

WSD amélioré 11-29

This machine has passed all quality controls and final inspection.

KYOCERA Document Solutions America, Inc.

Headquarters

225 Sand Road,

Fairfield, New Jersey 07004-0008, USA

Phone: [phone]

Fax: [phone]

Latin America

8240 NW 52nd Terrace Dawson Building, Suite 100

Miami, Florida 33166, USA

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Canada, Ltd.

6120 Kestrel Rd., Mississauga, ON L5T 1S8, Canada

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Mexico, S.A. de C.V.

Calle Arquimedes No. 130, 4 Piso, Colonia Polanco

Chapultepec, Delegacion Miguel Hidalgo,

KYOCERA Document Solutions Brazil, Ltda.

Alameda África, 545, Pólo Empresarial Consbrás, Tamboré, Santana de Parnaíba, State of São Paulo, CEP 06543-306, Brazil

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Chile SpA

Jose Ananias 505, Macul. Santiago, Chile

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Australia Pty. Ltd.

Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113, Australia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

New Zealand Ltd.

Ground Floor, 19 Byron Avenue, Takapuna, Auckland, New Zealand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Asia Limited

13/F., Mita Centre, 552-566, Castle Peak Road Tsuen Wan,

New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(China) Corporation

8F, No. 288 Nanjing Road West, Huangpu District,

Shanghai,200003, China

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(Thailand) Corp., Ltd.

335 Ratchadapisek Road, Wongsawang, Bangsue, Bangkok 10800, Thailand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Singapore Pte. Ltd.

12 Tai Seng Street #04-01A,

Luxasia Building, Singapore 534118

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Hong Kong Limited

16/F., Mita Centre, 552-566, Castle Peak Road Tsuen Wan, New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Taiwan Corporation

6F., No.37, Sec. 3, Minquan E. Rd.,

Zhongshan Dist., Taipei 104, Taiwan R.O.C.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Korea Co., Ltd.

10F Daewoo Foundation Bldg 18, Toegye-ro, Jung-gu, Seoul, Korea

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

India Private Limited

Second Floor, Centrum Plaza, Golf Course Road,

Sector-53, Gurgaon, Haryana 122002, India

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Europe B.V.

KYOCERA Document Solutions (U.K.) Limited

Eldon Court, 75-77 London Road,

Reading, Berkshire RG1 5BS,

United Kingdom

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Italia S.p.A.

Via Monfalcone 15, 20132, Milano, Italy,

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Belgium N.V.

Sint-Martinusweg 199-201 1930 Zaventem,

Belgium

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions France S.A.S.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Espana, S.A.

KYOCERA Document Solutions South Africa (Pty) Ltd.

KYOCERA House, Hertford Office Park,

90 Bekker Road (Cnr. Allandale), Midrand, South Africa

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Russia LLC.

Building 2, 51/4, Schepkina St., 129110, Moscow, Russia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Middle East

Dubai Internet City, Bldg. 17,

Office 157 P.O. Box 500817, Dubai,

United Arab Emirates

Phone: [phone]

KYOCERA Document Solutions Inc.

2-28, 1-chome, Tamatsukuri, Chuo-ku

Osaka 540-8585, Japan

Phone: [phone]

http://www.kyoceradocumentsolutions.com