ECOSYS P4060DN - Laser printer KYOCERA - Free user manual and instructions

USER MANUAL ECOSYS P4060DN KYOCERA

Line drawing of a server rack with orange curved line overlay, no text or symbols present

Préface

Diagram of a printer internal structure with barcode bar and asterisk annotations

Safety Instructions Regarding the Disconnection of Power 1-7

Conformité 1-7

Radio Tag Technology 1-8

Other precautions (for users in California, the United States) 1-8

EN ISO 7779 1-8

EK1-ITB 2000 1-8

Wireless Connection (Mexico only) 1-8

Programme Energy Star (ENERGY STAR®) 1-16

Command Center RX 2-53

Marge/Centrage, Marge 6-16

Brochure 6-17

Recto verso 6-19

Couverture 6-20

Mode Filigrane 6-21

N° page 6-22

Tampon texte 6-24

Tampon Bates 6-25

graph TD
    A["Receipt"] --> B["Approval"]
    B --> C["Review/Approval"]
    C --> D["Approve/Reject"]
    D --> E["Final Review/Approval"]

Safety Instructions Regarding the Disconnection of Power 1-7

Conformité 1-7

Radio Tag Technology 1-8

Other precautions (for users in California, the United States) 1-8

EN ISO 7779 1-8

EK1-ITB 2000 1-8

Wireless Connection (Mexico only) 1-8

Programme Energy Star (ENERGY STAR®) 1-16

Avis

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

SAFETY OF LASER BEAM (USA)

1. Safety of laser beam

This machine has been certified by the manufacturer to Class 1 level under the radiation performance standards established by the U.S.DHHS (Department of Health and Human Services) in 1968. This indicates that the product is safe to use during normal operation and maintenance. The laser optical system, enclosed in a protective housing and sealed within the external covers, never permits the laser beam to escape.

2. The CDRH Act

A laser-product-related act was implemented on Aug. 2, 1976, by the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration (FDA). This act prohibits the sale of laser products in the U.S. without certification, and applies to laser products manufactured after Aug. 1, 1976. The label shown below indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

The position of the rating label is show below.

XXXX

3. Maintenance

For safety of the service personnel, follow the maintenance instructions in the other section of this manual.

4. Safety switch

The power to the laser unit is cut off when the front cover is opened.

Safety Instructions Regarding the Disconnection of Power

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 and Part 18 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The use of a non-shielded interface cable with the referenced device is prohibited.

CAUTION — The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter.

Industry Canada ICES-003 Compliance Label: CAN ICES-3B/NMB-3B

* The above statements are valid only in the United States of America and Canada.

NOTE — Use shielded interface cables.

Radio Tag Technology

In some countries the radio tag technology used in this equipment to identify the toner container may be subject to authorization and the use of this equipment may consequently be restricted.

Other precautions (for users in California, the United States)

Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

EN ISO 7779

Wireless Connection (Mexico only)

The operation of this equipment is subject to the following two conditions:

Copyright (c) 1998-2006 OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (https://www.openssl.org/)"
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [e-mail].
5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (https://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Original SSLeay License

This package is an SSL implementation written by Eric Young ([e-mail]). The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson ([e-mail]).

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed.

If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: "This product includes cryptographic software written by Eric Young ([e-mail])" The word 'cryptographic' can be left out if the routines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson ([e-mail])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publicly available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

Monotype Imaging License Agreement

1 Software shall mean the digitally encoded, machine readable, scalable outline data as encoded in a special format as well as the UFST Software.
2 You agree to accept a non-exclusive license to use the Software to reproduce and display weights, styles and versions of letters, numerals, characters and symbols (Typefaces) solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging. Under the terms of this License Agreement, you have the right to use the Fonts on up to three printers. If you need to have access to the fonts on more than three printers, you need to acquire a multiuser license agreement which can be obtained from Monotype Imaging. Monotype Imaging retains all rights, title and interest to the Software and Typefaces and no rights are granted to you other than a License to use the Software on the terms expressly set forth in this Agreement.
3 To protect proprietary rights of Monotype Imaging, you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces.
4 You agree not to duplicate or copy the Software or Typefaces, except that you may make one backup copy. You agree that any such copy shall contain the same proprietary notices as those appearing on the original.
5 This License shall continue until the last use of the Software and Typefaces, unless sooner terminated. This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty (30) days after notice from Monotype Imaging. When this License expires or is terminated, you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested.
6 You agree that you will not modify, alter, disassemble, decrypt, reverse engineer or decompile the Software.
7 Monotype Imaging warrants that for ninety (90) days after delivery, the Software will perform in accordance with Monotype Imaging-published specifications, and the diskette will be free from defects in material and workmanship. Monotype Imaging does not warrant that the Software is free from all bugs, errors and omissions.
The parties agree that all other warranties, expressed or implied, including warranties of fitness for a particular purpose and merchantability, are excluded.
8 Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts, upon their return to Monotype Imaging.
In no event will Monotype Imaging be liable for lost profits, lost data, or any other incidental or consequential damages, or any damages caused by abuse or misapplication of the Software and Typefaces.
9 Massachusetts U.S.A. law governs this Agreement.

10 You shall not sublicense, sell, lease, or otherwise transfer the Software and/or Typefaces without the prior written consent of Monotype Imaging.
11 Use, duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252-227-7013, subdivision (b)(3)(ii) or subparagraph (c)(1)(ii), as appropriate. Further use, duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52.227-19 (c)(2).
12 You acknowledge that you have read this Agreement, understand it, and agree to be bound by its terms and conditions. Neither party shall be bound by any statement or representation not contained in this Agreement. No change in this Agreement is effective unless written and signed by properly authorized representatives of each party. By opening this diskette package, you agree to accept the terms and conditions of this Agreement.

Knopflerfish License

This product includes software developed by the Knopflerfish Project.

http://www.knopflerfish.org

Copyright 2003-2010 The Knopflerfish Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

• Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
• Neither the name of the KNOPFLERFISH project nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Apache License (Version 2.0)

Apache License

Version 2.0, January 2004

http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

1. Definitions.

"License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

"Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

"Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

"You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

"Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

"Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

"Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

"Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

"Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

1. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.
2. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.
3. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

(a)You must give any other recipients of the Work or Derivative Works a copy of this License; and

(b) You must cause any modified files to carry prominent notices stating that You changed the files; and

(c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

(d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

1. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.
2. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.
3. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.
4. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
5. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

To apply the Apache License to your work, attach the following boilerplate notice, with the fields enclosed by brackets "[]" replaced with your own identifying information. (Don't include the brackets!) The text should be enclosed in the appropriate comment syntax for the file format. We also recommend that a file or class name and description of purpose be included on the same "printed page" as the copyright notice for easier identification within third-party archives.

Copyright [yyyy] [name of copyright owner]

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Programme Energy Star (ENERGY STAR®)

Command Center RX 2-53

Technical diagram of a printer with numbered parts for identification and assembly reference.

Diagram showing a printer device connected to an optical module labeled OPT1 and OPT2, with a magnified inset highlighting the component.

Illustration of a desktop computer with an icon pointing to a power button (no text or symbols present)

Mise hors tension

1 Mettre la machine hors tension.

Illustration of a computer tower with an icon and directional arrow, no text or symbols present

Aff.mess. mise hrs tens. (page 8-4)

3D diagram of a printer with a monitor inside, showing internal components and a scroll arrow indicating rotation (no text or symbols present)

→ Réseau principal (client) (page 8-47)

Illustration of a hand holding a CD next to a laptop displaying a simple diagram (no text or symbols present)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols visible)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

REMARQUE

Illustration of a hand holding a CD to open a laptop screen (no text or symbols present)

Common files Document OS X 10.5 or higher Readme 1 Kyocera OS X 10.5+ build pkg Mac_Driver_PCL_Mode_Set up_Guide.pdf PDL Setup Kyocera OS X 10.5+ Japanese bsi_ pkg Mac_Driver_PCL_Mode_Set up_Guide_JA.pdf

Illustration showing two hand gestures: one pointing at a stack of papers, the other holding a closed book with arrows indicating motion (no text or symbols)

Diagram of a printer internal structure showing an open base with a blue printer attachment, no text or symbols present.

REMARQUE

Diagram showing printer internal structure with labeled parts and directional arrows, including a zoomed-in inset of the main component.

REMARQUE

Diagram showing printer assembly process with labeled steps ① and ②, including zoomed-in view of internal components.

Diagram showing printer internal structure with labeled parts and directional arrows indicating assembly or movement

Diagram illustrating printer operation with paper feeding into a printer and outputting a document with warning labels

IMPORTANT

Cross-sectional diagram of a mechanical device showing internal components and directional arrows (no text or symbols)

Diagram of a computer tower with a blue internal panel and an arrow pointing to the base panel (no text or symbols present)

Diagram illustrating server rack connection with labeled components and directional arrows indicating assembly steps

8 Afficher l'écran.

3D diagram of a printer drawer with an arrow indicating compression or disassembly (no text or symbols present)

REMARQUE

Diagram showing a printer drawer with labeled parts and directional arrows indicating movement or assembly.

REMARQUE

Diagram showing printer internal structure with labeled parts and zoomed-in view of the printer's internal components

Diagram showing printer internal structure with labeled parts and directional arrows indicating assembly or movement

REMARQUE

Diagram illustrating printer operation with paper feeding and mail handling, showing process steps and directional arrows

IMPORTANT

Cross-sectional diagram of a mechanical or electronic device with internal components and directional arrows (no text or symbols)

Diagram of a computer monitor with blue base and control panel, showing no text or symbols

Diagram illustrating the process of inserting a device into a folder, showing steps ①, ②, and ③ with labeled components.

8 Afficher l'écran.

Diagram of a printer internal structure showing a printer's base and internal components, with no visible text or symbols.

REMARQUE

Diagram showing a printer's internal structure being inserted into a machine, with an inset highlighting the component (no text or symbols present)

Mechanical assembly diagram showing a T-shaped component with blue and gray parts, no text or symbols present

Technical diagram showing assembly steps of a printer or printer with labeled components and directional arrows indicating assembly direction.

Diagram showing printer internal structure with labeled parts and zoomed-in view, likely illustrating a printing or assembly process.

Diagram showing a printer internal structure with labeled parts and an inset view of the printer's internal components.

Cross-sectional diagram of a mechanical or electronic component with internal blue components and gray outlines (no text or symbols)

Cross-sectional diagram of a mechanical or electronic component with internal components and no visible text or symbols

Architectural floor plan showing room layouts and structural elements (no text or labels)

Architectural floor plan of a multi-room building showing internal layout and doorways (no text or labels)

IMPORTANT

Cross-sectional diagram of a mechanical or electronic component with directional arrows indicating flow or movement (no text or symbols present)

3D diagram of a mechanical assembly with blue plastic housing and black arrow indicating a process (no text or symbols)

Diagram illustrating a printer's internal structure with a downward arrow and a warning label, accompanied by a document icon.

IMPORTANT

3D diagram of a mechanical device with blue internal compartments and a black arrow pointing to a component (no text or symbols)

Diagram illustrating file transfer process with labeled steps and component illustrations

5 Afficher l'écran.

3D diagram showing a blue plastic device inside a server rack, with an arrow pointing to the interior (no text or symbols present)

Diagram illustrating a process with directional arrows and a warning sign, showing a device interior with a lock and warning symbol.

IMPORTANT

Illustration of a blue storage cabinet with an arrow pointing to the front panel, next to stacked storage racks (no text or symbols present)

Diagram illustrating file transfer process with labeled steps and component layout

5 Afficher l'écran.

Diagram showing a printer's internal structure before and after processing, with numbered annotations indicating the process.

REMARQUE

Illustration of a printer's internal structure with a magnified inset showing the blade being cut (no text or symbols present)

Illustration of a hand holding a blue tool inside a mechanical component, with an arrow pointing to a specific part (no text or symbols present)

Diagram showing a hand holding a blue tool with two arrows pointing to a component, labeled with numbers ① and ②.

Illustration of two hands holding a printer with an upward arrow, no text or symbols present

Illustration of a printer being scanned into a paper, showing the printer's page being placed on top (no text or symbols present)

Illustration of a printer with a blue plastic cover being inserted, showing internal components and a control panel (no text or symbols)

Diagram showing a device being inserted into a lock, with labeled steps ① and ② indicating the process.

Diagram illustrating two steps of a printer or printer assembly process, labeled ① and ②, showing component positioning before and after assembly.

Diagram of a computer tower with an open storage unit and internal components, showing no text or symbols.

Diagram of a printer's internal structure showing paper feeding into a printer with a blue mesh overlay, and a close-up of the printer's cable being inserted (no text or symbols present)

Diagram showing a computer tower with a fan blade and a magnified view of the blade being twisted (no text or symbols present)

Diagram of a computer tower with internal components and cable routing (no text or symbols)

IMPORTANT

Diagram showing a server rack with cable routing and a close-up of the internal components, labeled with steps ① and ②.

IMPORTANT

Illustration of a computer tower with an open storage tray and a black arrow indicating a process (no text or symbols present)

Illustration of a printer's internal structure with an open lid and directional arrows indicating process (no text or symbols)

Illustration of a printer's internal structure with paper feeding into a slot, showing a close-up of the slot (no text or symbols present)

Diagram of a printer's internal structure showing paper feeding into a printer (no text or symbols present)

1 K 2 K 3 → K 1 2 3

Diagram showing a printer's internal structure with labeled layers and components, including a printer unit and three separate sheets with numbered parts.

2 Activer/désactiver l'application.

Aperçu 2015101010574501 The following items have Make details and marks: "To be aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be being aware that are statements, marks, to be having any details, not the same. Taille : A4 Résol. : 600x600dpi Couleur : Noir & Blanc 1/1 No. 3 4 5 6 Sélect. les pages à traiter Fermer Etat 2019/10/01 14:21

Illustration of a printer with a close-up view showing the printer's internal structure and a close-up of its internal components (no text or symbols present)

KYOCERA Document Solutions | Solutions KYOCERA KYOCERA Document Solutions Global HOME Products Solutions Support & Download Allot us KYOCERA Document Solutions Total document solutions deliver new value for business. 5 6 7 8 9 10 11 12 Enterr I'URL Rechercher Menu webapi 101

Diagram showing file folder structure with numbered labels and a close-up of a device's internal components.

Marge/Centrage, Marge 6-16

Brochure 6-17

Recto verso 6-19

Couverture 6-20

Mode Filigrane 6-21

N° page 6-22

Tampon texte 6-24

Tampon Bates 6-25

Two leaf icons: a green leaf with white vein patterns and a gray leaf with white vein patterns, connected by a red triangular arrow (no text or symbols)

Marge/Centrage, Marge

Fonctions

Fonctions

Diagram showing a pie chart before and after transformation, with a red arrow indicating the process.

Diagram showing a document being converted into a card with star ratings and numbered sections

Original

A

Finition

B

Aff.mess. mise hrs tens.

Touche [Menu Système/Compteur] > [Param. communs] > [Aff.mess. mise hrs tens.]

Configurer Wi-Fi Direct.

REMARQUE

Réseau principal (client)

Data Security Kit (E) Operation Guide

Valeur

REMARQUE

IMPORTANT

IMPORTANT

REMARQUE

Param. services à distance

Illustration of hands installing a blue folder into a machine (no text or symbols visible)

REMARQUE

Illustration of hands inserting a blue cylindrical component into a machine (no text or symbols visible)

Illustration of a blue cylindrical object wrapped in a paper with an arrow indicating rotation (no text or symbols)

Illustration of a blue cylindrical object with a transformation arrow indicating 3D projection (no text or symbols)

IMPORTANT

Diagram illustrating a hand gesture in a mechanical assembly, showing no hand and a magnified view of the component.

graph LR
    A["Hand moves vertically to form a rectangular block with a downward arrow and a vertical line inside"] --> B["Arrow to the right, labeled '5~6'"]
    B --> C["Arrow to the left, labeled '5~6'"]
    C --> D["Arrow to the center, labeled '5~6'"]
    D --> E["Arrow to the right, labeled '5~6'"]
    E --> F["Arrow to the right, labeled '5~6'"]
    style A fill:#f9f,stroke:#333
    style F fill:#bbf,stroke:#333

7 Installer la cartouche de toner.

IMPORTANT

Diagram illustrating a mechanical assembly process with labeled components and directional arrows, including a zoomed-in view of the component.

Diagram of a printer internal structure showing a blue panel inserted into a tray, with no visible text or symbols.

9 Refermer le capot avant.

Diagram of a computer drawer with a blue handle and arrow indicating direction (no text or symbols)

REMARQUE

Diagram showing a printer's internal structure with labeled parts and directional arrows indicating movement or assembly.

Illustration of hands inserting a blue cylindrical component into a server rack (no text or symbols)

Illustration of a blue threaded bolt being cut with an arrow indicating direction (no text or symbols)

Illustration of a blue cylindrical object with a dashed arrow pointing to a 3D cube (no text or symbols)

3D diagram of a computer tower with a blue arrow pointing to a component, showing no text or symbols.

REMARQUE

Diagram of a printer internal processing device with a blue door open, showing internal components and a control panel (no text or symbols)

Diagram of a printer internal structure showing internal components and a close-up of the printer's lid (no text or symbols present)

graph TD
    A["1: Car Body with Internal Component"] --> B["2: Component Assembly"]
    B --> C["3: Assembly of Internal Component"]
    C --> D["4: Final Assembly with Internal Component"]
    style A fill:#f9f,stroke:#333
    style B fill:#bbf,stroke:#333
    style C fill:#bfb,stroke:#333
    style D fill:#ffb,stroke:#333

Diagram of a printer internal structure showing internal components and a screen (no text or symbols)

5 Refermer le capot.

Illustration of a printer with a blue arrow pointing to the open lid (no text or symbols visible)

Diagram of a printer internal structure showing internal components and a blue door opening (no text or symbols)

Interior view of a printer's internal structure showing internal components and a blue component (no text or symbols visible)

graph TD
    A["Component 1: Initial state"] --> B["Assembly Step 1"]
    B --> C["Assembly Step 2: Directional motion"]
    C --> D["Final Assembly Step"]
    D --> E["Assembly Step 3: Directional motion"]

Interior view of a printer's internal structure showing internal components and a digital display (no text or symbols visible)

5 Refermer le capot.

Illustration of a printer with a blue cover and arrow indicating a process or operation (no text or symbols present)

Diagram of a printer internal structure with numbered annotations indicating parts of the open door and internal components.

Technical diagram of a device interior with labeled components A, B, and C, showing internal structure and assembly.

graph TD
    A["Initial Assembly with Component 1"] --> B["Assembly Step 1: Internal Combustion"]
    B --> C["Assembly Step 2: Internal Combustion"]
    C --> D["Assembly Step 3: Internal Combustion"]
    D --> E["Final Assembly with Component 4"]

Technical diagram showing a mechanical assembly with an inset close-up of a component, no visible text or symbols.

5 Refermer les capots.

Diagram of a printer's internal structure with labeled parts and directional arrows indicating flow or movement.

Diagram of a printer's internal structure showing a blue plastic door opening and a digital display on the right (no text or symbols present)

3D technical illustration of a printer internal structure with a blue plastic component inserted (no text or symbols visible)

REMARQUE

Illustration of a person receiving medical or surgical procedures from a blue clipboard (no text or symbols visible)

Technical illustration of a printer internal structure showing internal components and a digital display (no text or symbols)

5 Refermer le capot.

Illustration of a printer with a blue arrow pointing to the door panel (no text or symbols present)

Diagram of a printer internal structure showing internal components and a blue plastic cover (no text or symbols)

Technical diagram of an open industrial machine with internal components and a blue plastic component (no text or symbols visible)

REMARQUE

Illustration of a person receiving a medical procedure from a blue clipboard (no text or symbols present)

Interior view of a printer showing internal components and a blue arrow indicating a specific part (no text or symbols present)

5 Refermer le capot.

Illustration of a printer with a blue cover and directional arrow indicating motion (no text or symbols)

Dépannage

Diagram showing file transfer process with labeled steps ① and ②, showing a server rack and printer casing.

Illustration of a printer with internal components and a blue technical diagram showing a mechanical assembly (no text or symbols)

Illustration of a printer or scanner with internal components and a paper airplane (no text or symbols visible)

Illustration of a printer with a digital display and a blue cover, showing no text or symbols on the device itself.

Diagram of a printer's internal structure showing paper feeding into a printer holder, with a black arrow indicating the paper's direction (no text or symbols present)

Diagram of a printer or printer assembly showing paper being inserted into a slot (no text or symbols visible)

REMARQUE

Diagram of a printer internal structure showing internal components and an arrow indicating assembly (no text or symbols present)

Diagram of a computer tower with an open storage unit and a black arrow pointing to it (no text or symbols present)

3D diagram of a server rack with a blue box and directional arrow, no text or symbols present

Diagram showing file transfer process with labeled steps ① and ②, showing a server rack and printer casing.

Illustration of a printer with internal components and a blue technical diagram showing a mechanical assembly (no text or symbols)

Illustration of a printer with a blue paper clip being inserted, showing internal components and a blue arrow indicating process (no text or symbols)

Illustration of a printer with internal components and a lightning bolt indicating a mechanical assembly (no text or symbols present)

Illustration of a printer with a digital display and a blue door, showing no text or symbols on the device itself.

3D diagram of a printer's internal structure showing a printer's base and paper holder, with a black arrow indicating the component (no text or symbols present)

3D technical diagram of a printer assembly with paper feed and paper sheet (no text or symbols)

REMARQUE

Diagram of a printer's internal structure showing paper feeding into a rack, with no visible text or symbols.

Diagram of a computer monitor with blue base and control panel, showing no text or symbols

3D diagram of a server rack with a blue box and directional arrow, no text or symbols present

Diagram showing file transfer process with labeled steps ① and ②, showing a server rack and printer casing.

3D diagram of a server rack with a blue mesh tray and a mechanical component inserted (no text or symbols)

Diagram of a server rack with multiple drawers and a paper feed insert (no text or symbols)

Diagram of a printer's internal structure showing a blue plastic holder and paper tray, with an arrow indicating a loading or assembly process (no text or symbols present)

Diagram of a printer's internal structure showing paper feeding into a rack, with no visible text or symbols.

REMARQUE

Diagram of a printer's internal structure showing paper feeding into a rack, with no visible text or symbols.

Illustration of a multi-level storage unit with blue shipping containers and directional arrows indicating movement (no text or symbols)

3D diagram of a server rack and a blue storage unit with an arrow indicating direction (no text or symbols)

Diagram showing a file transfer or storage operation with labeled steps ① and ②, indicating file movement from a device to a folder.

Diagram of a server rack with a blue storage tray and an arrow indicating a loading or movement (no text or symbols present)

Illustration of a file cabinet with drawers and a keyboard, showing internal components (no text or symbols)

3D diagram of a printer or printer assembly with blue plastic casing and black arrow indicating a loading or movement (no text or symbols present)

Mechanical assembly diagram showing a device with a moving part and a control panel (no text or symbols visible)

Diagram of a server rack with blue storage compartments and directional arrows indicating movement (no text or symbols)

3D diagram of a blue box next to a gray storage cabinet with multiple compartments (no text or symbols)

Diagram showing a device being inserted into a box, with labeled parts (① and ②) indicating assembly or processing steps.

Diagram of a server rack with a blue storage tray and an arrow indicating a loading or movement (no text or symbols present)

Diagram of a file cabinet with drawers and a keyboard, showing internal components (no text or symbols)

3D diagram of a printer or printer assembly with blue plastic casing and black arrow indicating a loading or movement (no text or symbols present)

3D diagram of a printer or printer assembly showing internal components and a directional arrow (no text or symbols)

3D diagram of a printer's internal structure showing paper feeding into a machine (no text or symbols visible)

Diagram of a server rack with blue storage compartments and directional arrows indicating movement (no text or symbols)

Diagram of a server rack with multiple f visibly inserted, showing a blue cover and an arrow pointing to the side panel (no text or symbols present)

3D diagram of a blue box with an arrow pointing to its side panel, next to a gray storage cabinet (no text or symbols present)

Diagram showing file transfer process with labeled steps ① and ②, showing a server rack and printer casing.

Diagram showing a device being inserted into a rack-mounted unit, with no visible text or symbols.

Diagram showing two storage units with internal compartments and a blue cabinet, no text or symbols present

Illustration of two storage cabinets with internal compartments and a door open, showing no text or symbols.

Illustration of a blue box next to a stack of gray server racks, with an arrow pointing to it (no text or symbols present)

Illustration of a printer's internal structure with paper being inserted, showing paper sheet and printer (no text or symbols)

Diagram of a printer's internal structure showing paper feeding into a stack of sheets (no text or symbols present)

Illustration of a printer's internal structure with paper feeding into a paper holder, showing paper movement and a magnified inset (no text or symbols)

Diagram showing file transfer process with labeled steps ① and ②, showing a server rack and printer casing.

Illustration of a printer with internal components and a blue mechanical assembly, showing no text or symbols.

Diagram of a computer monitor with an open screen showing internal components and a lightning bolt symbol (no text or labels)

Illustration of a printer internal processing machine with visible mechanical components and a paper airplane (no text or symbols)

Illustration of a printer internal processing machine with visible mechanical components and control panel (no text or symbols)

Illustration of a printer with internal components and external wiring (no text or symbols visible)

Illustration of a printer or scanner with internal components and a directional arrow indicating movement (no text or symbols present)

Illustration of a printer or printer with a blue plastic component being inserted, labeled A5 (no text or symbols on the device itself)

Illustration of a printer or scanner with internal components and a directional arrow indicating flow or movement (no text or symbols present)

Illustration of a printer's internal processing setup showing paper feeding into a machine (no text or symbols visible)

Illustration of a printer with a digital display and a blue cover, showing no text or symbols on the device itself.

3D diagram of a server rack with a blue box and directional arrow, no text or symbols present

Diagram showing file transfer process with labeled steps ① and ②, showing a server rack and printer casing.

Diagram of a server rack with a blue tray and a mechanical component inserted, showing no text or symbols.

Illustration of a file organizer with paper feed and paper tray, showing mechanical components (no text or symbols)

Illustration of a multi-level storage cabinet with a blue door and arrow indicating rotation (no text or symbols)

3D diagram of a blue box next to a gray storage cabinet with multiple drawers (no text or symbols visible)

Diagram showing a file transfer or storage operation with labeled steps ① and ②, indicating file movement from physical to digital.

Diagram of a server rack with file cabinets and a blue storage tray, showing internal components (no text or symbols)

Diagram of a file cabinet with drawers and a keyboard, showing internal components without any text or symbols

Illustration of a file cabinet with drawers and a blue door, showing no text or symbols

Illustration of a blue box with an arrow pointing to it, next to a gray storage cabinet (no text or symbols present)

Illustration of a printer's internal structure showing paper feeding into a slot (no text or symbols visible)

Illustration of a printer with an open paper feed into the print area, showing internal structure and control panel (no text or symbols)

3 Refermer le capot.

Illustration of a printer with an open lid and paper feed being inserted (no text or symbols visible)

Illustration of a printer emitting a fan or cover, showing internal structure and airflow direction (no text or symbols)

Illustration of a computer monitor with a grid-patterned screen and an arrow indicating compression or disassembly (no text or symbols present)

3 Refermer le capot.

Illustration of a computer monitor with a blue screen and a scroll, showing a scroll stack (no text or symbols)

Illustration of a printer with a paper feed and control panel, showing internal components without any text or symbols.

Illustration of a printer with internal components and a blue cover, showing no text or symbols.

Illustration of a printer with an open lid and paper feed being inserted (no text or symbols visible)

Illustration of a printer's internal structure showing paper feeding into a machine with a blue plastic component (no text or symbols visible)

Diagram of a printer internal structure showing internal components and a blue plastic cover (no text or symbols)

Technical illustration of a printer internal structure showing internal components and assembly (no text or symbols)

Diagram of a printer internal structure showing internal components and a close-up view of the printer's internal mechanism (no text or symbols present)

Illustration of a printer with a blue cover and paper feed being inserted (no text or symbols visible)

Diagram of a printer internal structure showing internal components and a blue door opening (no text or symbols)

Technical diagram of a mechanical assembly showing internal components and a directional arrow (no text or labels)

Technical diagram of a mechanical device interior showing internal components and a directional arrow (no text or symbols)

Illustration of a printer with a blue cover and arrow indicating a process (no text or symbols present)

Illustration of a printer with an open lid and control panel, showing internal components without any text or symbols.

Diagram of an open printer with internal components and a blue door opening, showing internal mechanism (no text or symbols)

Technical diagram of a mechanical assembly showing internal components and a directional arrow (no text or labels)

Interior view of a mechanical device showing internal components and a blue arrow indicating rotation (no text or symbols present)

Technical diagram of a mechanical assembly with internal components and directional arrows (no text or labels)

Technical diagram of a mechanical assembly with internal components and a blue component highlighted (no text or symbols)

Technical diagram of a mechanical assembly with internal components and a directional arrow indicating motion (no text or symbols present)

Technical diagram of a mechanical assembly with fan and housing components (no text or labels)

Illustration of a printer with a blue cover and directional arrow indicating motion (no text or symbols)

Illustration of a printer with an open lid and control panel, showing internal components without any text or symbols.

Technical illustration of a printer internal structure showing internal components and a blue plastic cover (no text or symbols)

Technical diagram of a mechanical assembly showing internal components and a directional arrow (no text or labels)

Interior view of a mechanical device showing internal components and a blue component with directional arrow (no text or symbols)

Technical diagram of a mechanical assembly with internal components and directional arrows (no text or labels)

Technical diagram of a mechanical device interior showing internal components and a directional arrow (no text or symbols)

Illustration of a printer with a blue cover and arrow indicating a process or operation (no text or symbols present)

Diagram of a printer internal structure with numbered parts and directional arrows indicating assembly or operation.

Technical diagram of a mechanical device interior showing internal components and a directional arrow (no text or symbols)

Technical diagram of a mechanical device interior showing internal components and a blue component with directional arrow (no text or symbols)

Technical line drawing of a mechanical assembly with internal components and a directional arrow (no text or symbols)

Technical diagram of a mechanical assembly with internal components and an arrow indicating direction (no text or symbols present)

Technical line drawing of a mechanical assembly with internal components and an arrow indicating direction (no text or symbols)

Diagram showing two labeled components (① and ②) of a printer or scanner system with directional arrows indicating flow or movement.

Mechanical assembly diagram showing a blue component being inserted into a gray housing (no text or symbols visible)

Mechanical assembly diagram showing a component with levers and gears (no text or symbols)

Technical diagram showing a mechanical assembly with labeled parts and directional arrows indicating movement or assembly steps.

Technical diagram of a mechanical assembly with numbered components and directional arrows indicating motion or movement.

3D mechanical assembly diagram showing internal components and a downward arrow indicating motion (no text or symbols)

3D mechanical assembly diagram showing internal components and a blue arrow indicating direction (no text or symbols)

3D mechanical assembly diagram showing a component being inserted into a housing (no text or symbols visible)

Mechanical assembly diagram showing a device with a paper feed into a housing (no text or symbols visible)

Mechanical assembly diagram showing a blue component being inserted into a housing (no text or symbols visible)

3D mechanical assembly diagram showing internal components and a directional arrow (no text or symbols)

Mechanical assembly diagram showing a blue component being inserted into a gray container (no text or symbols visible)

Mechanical assembly diagram showing a device with levers and wheels (no text or symbols)

Technical diagram showing a mechanical assembly with labeled parts and directional arrows indicating movement or assembly steps.

Technical diagram of a mechanical device with numbered components and directional arrows indicating assembly or movement.

3D mechanical assembly diagram showing internal components and a highlighted section (no text or symbols)

3D mechanical assembly diagram showing internal components and a blue arrow indicating rotation (no text or symbols)

3D mechanical assembly diagram showing internal components with a blue highlighted section (no text or symbols)

Mechanical assembly diagram showing a device with internal components and a directional arrow (no text or symbols)

Mechanical assembly diagram showing a blue component being inserted into a gray housing (no text or symbols visible)

3D mechanical assembly diagram showing internal components and a directional arrow (no text or symbols)

Diagram of a printer internal structure with labeled parts, showing open and closed views with numbered annotations.

Technical line drawing of a mechanical assembly or housing with internal components and an arrow indicating direction (no text or symbols present)

Diagram showing two labeled views of a printer or scanner device with numbered annotations indicating directional movement.

Illustration of a printer with internal components and a blue cover, showing no text or symbols.

Illustration of a printer with paper being inserted, showing internal structure and control panel (no text or symbols)

Illustration of a printer internal processing a blue liquid into a paper airplane (no text or symbols visible)

Diagram of a printer internal structure showing internal components and a blue plastic cover (no text or symbols)

Technical illustration of a printer internal structure showing internal components and assembly (no text or symbols)

Diagram of a printer internal structure showing internal components and a close-up view of the printer's internal mechanism (no text or symbols present)

Technical diagram of a printer internal structure showing internal components and a control panel (no text or symbols)

Two technical diagrams showing a mechanical assembly before and after a change, with no visible text or symbols.

Diagram of a printer internal structure showing internal components and a screen (no text or symbols)

Illustration of a printer with a blue cover and paper feed being inserted (no text or symbols visible)

Diagram of a printer internal structure showing internal components and a blue door opening (no text or symbols)

Technical diagram of a mechanical assembly with internal components and an arrow indicating a directional component (no text or symbols present)

Interior view of a mechanical device showing internal components and a blue highlighted component (no text or symbols visible)

Interior view of a printer's internal structure showing internal components and a digital display (no text or symbols visible)

Two technical diagrams showing a device interior with internal components and a red arrow indicating transformation (no text or symbols present)

Interior view of a printer's internal structure showing internal components and a digital display (no text or symbols visible)

Illustration of a printer with a blue cover and arrow indicating a process or operation (no text or symbols present)

Diagram of a printer internal structure with numbered annotations indicating parts of the open door and internal components.

Technical line drawing of a mechanical assembly or housing with internal components and a directional arrow (no text or symbols)

Technical diagram of a device interior with labeled components A, B, and C, showing internal mechanical assembly and directional arrow.

Mechanical assembly diagram showing two views of a device with blue and gray components, no text or symbols present.

Diagram showing a mechanical assembly with an inset close-up of internal components and a magnified view of a component (no text or symbols present)

Diagram of a printer system showing two labeled components (① and ②) with directional arrows indicating flow or movement.

3D mechanical assembly diagram showing a blue component being inserted into a housing (no text or symbols visible)

Mechanical assembly diagram showing a device with levers and gears (no text or symbols)

Technical diagram showing a mechanical assembly with labeled parts and directional arrows indicating movement or assembly steps.

Technical diagram of a mechanical device with numbered components and directional arrows indicating assembly or movement.

3D mechanical assembly diagram showing internal components and a downward arrow indicating motion (no text or symbols)

3D mechanical assembly diagram showing internal components and a blue arrow indicating direction (no text or symbols)

3D mechanical assembly diagram showing internal components with a blue arrow indicating direction (no text or symbols)

Mechanical assembly diagram showing a device with internal components and a directional arrow (no text or symbols)

Mechanical assembly diagram showing a blue component being inserted into a gray housing (no text or symbols visible)

3D mechanical assembly diagram showing internal components and a directional arrow (no text or symbols)

11 Annexe

Illustration of a hand inserting a blue object into a gray container with an arrow indicating direction (no text or symbols)

→ Card Authentication Kit(B) Operation Guide

Application

Data Security Kit

Card Authentication Kit

Option ThinPrint*1

Emulation Upgrade Kit

Authentication code PIN 9-19

Connexion 2-23

Déconnexion 2-24

Impression 9-8

Aff.mess. mise hrs tens. 8-23

Agrafage/Perforation 6-9

Aide 11-27

AirPrint 4-17

Alarme 8-9

Application 5-9, 8-58

Applications en option 11-7

Assembler/Décaler 6-8

Défaut 8-15

Command Center RX 2-53

EcoPrint 6-13, 11-28

Défaut 8-15

Imprimante 8-24

Enhanced WSD over SSL

Monotype Imaging License Agreement 1-12

Mopria 4-17

Type de support 8-10

Papier couché 11-18

Aff.mess. mise hrs tens. 8-23

Plateau principal 2-2

Plier 6-7

Poignées 2-2

Polices contour 11-28

POP3 11-28

Programme Energy Star (ENERGY STAR®) 1-16

Param. hist. connexions 8-29

Param. hist. journal machine 8-30

Réglage/Maintenance 8-56, 10-33

Chauffage tambour 8-56

Cycle de calibration 8-57

Diagnostic de mémoire 8-57

Réseau principal (client) 8-47

Réseau sans fil

Réseau principal (client) 8-47

Wireless Connection 1-8

This machine has passed all quality controls and final inspection.

KYOCERA Document Solutions America, Inc.

Headquarters

225 Sand Road,

Fairfield, New Jersey 07004-0008, USA

Phone: [phone]

Fax: [phone]

Latin America

8240 NW 52nd Terrace, Suite 301

Miami, Florida 33166, USA

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Canada, Ltd.

6120 Kestrel Rd., Mississauga, ON L5T 1S8, Canada

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Mexico, S.A. de C.V.

Calle Arquimedes No. 130, 4 Piso, Colonia Polanco

Chapultepec, Delegacion Miguel Hidalgo,

KYOCERA Document Solutions Brazil, Ltda.

Alameda África, 545, Pólo Empresarial Consbrás, Tamboré, Santana de Parnaíba, State of São Paulo, CEP 06543-306, Brazil

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Chile SpA

Jose Ananias 505, Macul. Santiago, Chile

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Australia Pty. Ltd.

Level 3, 6-10 Talavera Road North Ryde N.S.W, 2113, Australia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

New Zealand Ltd.

Ground Floor, 19 Byron Avenue, Takapuna, Auckland, New Zealand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Asia Limited

13/F., Mita Centre, 552-566, Castle Peak Road Tsuen Wan,

New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(China) Corporation

8F, No. 288 Nanjing Road West, Huangpu District,

Shanghai,200003, China

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

(Thailand) Corp., Ltd.

335 Ratchadapisek Road, Wongsawang, Bangsue, Bangkok 10800, Thailand

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Singapore Pte. Ltd.

12 Tai Seng Street #04-01A,

Luxasia Building, Singapore 534118

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Hong Kong Limited

16/F., Mita Centre, 552-566, Castle Peak Road Tsuen Wan, New Territories, Hong Kong

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

Taiwan Corporation

6F., No.37, Sec. 3, Minquan E. Rd.,

Zhongshan Dist., Taipei 104, Taiwan R.O.C.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Korea Co., Ltd.

10F Daewoo Foundation Bldg 18, Toegye-ro, Jung-gu, Seoul, Korea

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions

India Private Limited

Second Floor, Centrum Plaza, Golf Course Road,

Sector-53, Gurugram, Haryana 122002, India

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Europe B.V.

KYOCERA Document Solutions (U.K.) Limited

Eldon Court, 75-77 London Road,

Reading, Berkshire RG1 5BS,

United Kingdom

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Italia S.p.A.

Via Monfalcone 15, 20132, Milano, Italy,

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Belgium N.V.

Sint-Martinusweg 199-201 1930 Zaventem,

Belgium

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions France S.A.S.

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Espana, S.A.

KYOCERA Document Solutions South Africa (Pty) Ltd.

KYOCERA House, Hertford Office Park,

90 Bekker Road (Cnr. Allandale), Midrand, South Africa

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Russia LLC.

Building 2, 51/4, Schepkina St., 129110, Moscow, Russia

Phone: [phone]

Fax: [phone]

KYOCERA Document Solutions Middle East

Dubai Internet City, Bldg. 17,

Office 157 P.O. Box 500817, Dubai,

United Arab Emirates

Phone: [phone]

KYOCERA Document Solutions Czech, s.r.o.

Harfa Office Park, Českomoravská 2420/15, Praha 9

Phone: [phone]

KYOCERA Document Solutions Inc.

2-28, 1-chome, Tamatsukuri, Chuo-ku

Osaka 540-8585, Japan

Phone: [phone]

https://www.kyoceradocumentsolutions.com