K-50 - Digital SLR Camera PENTAX - Free user manual and instructions

Product type	Digital SLR camera
Brand	PENTAX
Model	K-50
Sensor	CMOS APS-C with integrated low-pass filter
Effective pixels	16.3 megapixels
Maximum resolution	4928 x 3264 pixels
Compatible lenses	DA, DA L, D FA, FA J lenses and lenses with A position
Image stabilizer	Yes, sensor shift (Shake Reduction)
Viewfinder	Optical reflex viewfinder with diopter correction
Dimensions (W x H x D)	Approx. 129.0 mm × 96.5 mm × 70.0 mm (excluding protrusions)
Weight	Approx. 650 g (with battery and memory card), 590 g (body only)
Power supply	Rechargeable lithium-ion battery D-LI109 (included) or D-BH109 battery holder (optional) with 4 AA batteries
Battery life (D-LI109)	Approx. 480 shots without flash, 410 with flash (CIPA standard)
Storage media	SD, SDHC, SDXC memory card
File formats	JPEG, RAW (DNG)
ISO sensitivity range	100 – 51200
Built-in flash	Yes, guide number approx. 12 (ISO 100)
Connections	USB 2.0, AV output, remote control terminal
Sensor cleaning	Dust removal system (DRII) and manual cleaning possible
Included accessories	Hot shoe cover, eyecup, body cap, strap O-ST132, charger D-BC109, power cord, USB cable I-USB7, software (CD-ROM) S-SW138
Warranty	12 months

Frequently Asked Questions - K-50 PENTAX

How to charge the lithium-ion battery D-LI109?

Use the included D-BC109 charger. Connect the power cord to the charger and then to the power outlet. Insert the battery with the mark facing upward until it clicks. The indicator lights up during charging and turns off when charging is complete (approx. 240 minutes). Do not use the charger for other types of batteries.

How to insert an SD memory card into the K-50?

Make sure the camera is turned off. Open the card slot cover on the right side. Insert the card fully, label facing the screen, until it clicks into place. Close the cover. To remove the card, push it slightly to release. Never remove the card while the access indicator is lit.

How to activate Shake Reduction stabilization?

In the [Capture Mode] menu, set [Shake Reduction] to [ON]. You can also activate it via the settings screen (INFO button). The stabilization icon appears on the screen. For videos, enable [Movie SR] in the [Video] menu. Stabilization corrects camera shake during shooting.

What types of lenses can I use with the K-50?

You can use DA, DA L, D FA, FA J lenses as well as lenses with an A position on the aperture ring (set to A). Lenses without an A position or from other brands may have limitations. Refer to the 'Functions Available with Different Lens Combinations' section of the manual for details.

How to clean the CMOS sensor?

Use the built-in cleaning function: in the [Preferences] menu, select [Sensor Cleaning]. The camera shakes the sensor to remove dust. If cleaning is insufficient, you can use a manual blower (never compressed air). For deeper cleaning, contact PENTAX service center.

How to set the date and time?

When first turning on the camera, the [Initial Settings] screen appears. Use the navigation buttons to select the language, hometown city, then set the date and time in [Date Setting]. You can also change these settings later in the [Preferences 1] menu > [Date and Time].
* Date format (dd/mm/yy, mm/dd/yy, or yy/mm/dd) and 12h/24h format are adjustable.

How to use the built-in flash?

Press the [Flash Pop-up] button to raise the flash. In Auto mode, the flash fires automatically when needed. You can choose the flash mode (Auto, Fill-in, Slow sync, Red-eye reduction, etc.) via the navigation button (right) in shooting mode. To close the flash, push it down gently.

How to record a video?

Set the mode dial to [Video] (camera icon). Press the [Live View] button to display the screen. Press the shutter button to start recording, and again to stop. You can change video settings (resolution, frame rate, etc.) in the [Video] menu.
* Use a high-speed SD memory card to avoid interruptions.

How to transfer photos to a computer?

Connect the camera to the computer using the included I-USB7 USB cable. Turn on the camera. The default USB connection mode is [MSC] (Mass Storage). The computer recognizes the camera as a drive. Copy files directly. To use the included software (SILKYPIX Developer Studio), install it from the CD-ROM.

How to reset the camera settings?

In the [Preferences 1] menu, select [Reset]. Choose [Reset Settings] to return to factory defaults. This resets shooting, playback, and custom settings. Date/time and language settings are retained. Confirm by pressing OK.

USER MANUAL K-50 PENTAX

Batterie lithium-ion rechargeable D-L1109

① Bouton (Correction IL)

① Bouton (Correction IL)

14 Sur-impression (p.138)

Increments IL	Valeur de correction de l'exposition
1/3 IL	±0,3; ±0,7; ±1,0; ±1,3; ±1,7; ±2,0; ±2,3; ±2,7; ±3,0; ±3,3; ±3,7; ±4,0; ±4,3; ±4,7; ±5,0
1/2 IL	±0,5; ±1,0; ±1,5; ±2,0; ±2,5; ±3,0; ±3,5; ±4,0; ±4,5; ±5,0

Affichage 4/9/16/36/81 imagettes

Amplification des tons

Assistance AF 19, 70, 112

AUTO (Image auto.),

mode 68,90

rechargeables Ni-MH .... 52

( ) 22, 24, 41, 80

Bouton vert 21, 179

INFO (Bouton INFO) .... 21, 24, 25, 31, 200

Info/optionsprograme 243

(Bouton Lecture) ..21, 24, 76

MENU (Bouton
MENU) 22, 24, 44

Mer & Neige 92

OK (Bouton OK) ....22, 24, 114

Portrait nocturne 90, 91

RAW/Fx, bouton 21, 182

Réglages capture image ....154

Réglages capture video 141

Réglages plaque dynamiq ....164

For customers in USA STATEMENT OF FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Perchlorate Material-special handling may apply.

The lithium battery used in this camera contains perchlorate material, which may require special handling.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Declaration of Conformity

According to 47CFR, Parts 2 and 15 for

Class B Personal Computers and Peripherals

We: PENTAX RICOH IMAGING AMERICAS CORPORATION

Located at: 633 17th Street, Suite 2600 Denver, Colorado 80202 U.S.A. Phone: [phone] FAX: [phone]

Declare under sole responsibility that the product identified herein complies with 47CFR Parts 2 and 15 of the FCC rules as a Class B digital device. Each product marketed is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on the statistical basis as required by 47CFR §2.909. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The above named party is responsible for ensuring that the equipment complies with the standards of 47CFR §15.101 to §15.109.

Product Name: Digital Camera

Model Number: K-50

Contact person: Customer Service Manager

Date and Place: May, 2013, Colorado

PENTAX RICOH IMAGING FRANCE S.A.S. (European Headquarters)

112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex, FRANCE
(HQ - http://www.pentax.eu)
(France - http://www.pentax.fr)

PENTAX RICOH IMAGING
DEUTSCHLAND GmbH

Am Kaiserkai 1, 20457 Hamburg,
GERMANY
(http://www.pentax.de)

PENTAX RICOH IMAGING UK LTD.

PENTAX House, Heron Drive, Langley, Slough, Berks SL3 8PN, U.K. (http://www.pentax.co.uk)

PENTAX RICOH IMAGING AMERICAS CORPORATION

633 17th Street, Suite 2600, Denver, Colorado 80202, U.S.A.
(http://www.pentaximaging.com)

PENTAX RICOH IMAGING CANADA INC.

1770 Argentina Road Mississauga, Ontario L5N 3S7, CANADA (http://www.pentax.ca)

PENTAX RICOH IMAGING CHINA CO., LTD.

23D, Jun Yao International Plaza, 789 Zhaojiabang Road, Xu Hui District, Shanghai, 200032, CHINA (http://www.pentax.com.cn)