DPO5204 - Oscilloscope TEKTRONIX - Free user manual and instructions

USER MANUAL DPO5204 TEKTRONIX

Vertical System Analog Channels

Characteristic	MSO5034 DPO5034	MSO5054 DPO5054	MSO5104 DPO5104	MSO5204 DPO5204
Input Channels	4
Analog Bandwidth (-3 dB)	350 MHz	500 MHz	1 GHz	2 GHz
Rise Time (Calculated)	1 ns	700 ps	350 ps	175 ps
DC Gain Accuracy	±1.5%, derated at 0.10%/°C above 30 °C
Bandwidth Limits	Depending on instrument model: 1 GHz, 500 MHz, 350 MHz, 250 MHz, and 20 MHz
Input Coupling	AC, DC
Input Impedance	1 MΩ ±1%, 50 Ω ±1%
Input Sensitivity	1 MΩ: 1 mV/div to 10 V/div50 Ω: 1 mV/div to 1 V/div
Vertical Resolution	8 bits (11 bits with Hi Res)
Max Input Voltage, 1 MΩ	300 VRMS CAT II, with peaks ≤ ±425 VFor <100 mV/div derate at 20 dB/decade above 100 kHz to 30 VRMS at 1 MHz, 10 dB/decade above 1 MHzFor ≥100 mV/div derate at 20 dB/decade above 3 MHz to 30 VRMS at 30 MHz, 10 dB/decade above 30 MHz
Max Input Voltage, 50 Ω	5 VRMS, with peaks ≤ ±20 V
Position Range	±5 divisions
Delay between any Two Channels (Typical)	≤100 ps (50 Ω, DC coupling and equal V/div at or above 10 mV/div)
Offset Range
1 mV/div - 50 mV/div		1 MΩ: ±1 V50 Ω: ±1 V
50.5 mV/div - 99.5 mV/div		1 MΩ: ±0.5 V50 Ω: ±0.5 V
100 mV/div - 500 mV/div		1 MΩ: ±10 V50 Ω: ±10 V
505 mV/div - 995 mV/div		1 MΩ: ±5 V50 Ω: ±5 V
1 V/div - 5 V/div		1 MΩ: ±100 V50 Ω: ±5 V
5.05 V/div - 10 V/div		1 MΩ: ±50 V50 Ω: NA
Offset Accuracy	±(0.005 × |offset - position| + DC Balance)Note: Both position and constant offset term must be converted to volts by multiplying by the appropriate volts/div term
Channel-to-Channel Isolation (Any two channels at equal Vertical Scale settings) (Typical)	≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated BW

Vertical System Digital Channels

Characteristic	All MSO5000 Models
Input Channels	16 Digital (D15 - D0)
Thresholds	Per-channel Thresholds
Threshold Selections	TTL, ECL, User
User-defined Threshold Range	±40 V
Threshold Accuracy	±(100 mV + 3% of threshold setting)
Maximum Input Voltage	±42 Vpeak
Input Dynamic Range	30 Vp-d ≤200 MHz 10 Vp-d >200 MHz
Minimum Voltage Swing	400 mV
Input Impedance	100 kΩ
Probe Loading	3 pF
Vertical Resolution	1 bit

Horizontal System Analog Channels

Characteristic	MSO5034 DPO5034	MSO5054 DPO5054	MSO5104 DPO5104	MSO5204 DPO5204
Maximum Sample Rate (All channels)	5 GS/s	5 GS/s	5 GS/s	5 GS/s
Maximum Sample Rate (1 or 2 channels)	—	—	10 GS/s	10 GS/s
Maximum Equivalent Time Sampling Rate	400 GS/s
Maximum Record Length with Standard Configuration	12.5M		12.5M (4 ch)25M (1 or 2 ch)
Maximum Record Length with Option 2RL	25M		25M (4 ch)50M (1 or 2 ch)
Maximum Record Length with Option 5RL	50M		50M (4 ch)125M (1 or 2 ch)
Maximum Record Length with Option 10RL	125M		125M (4 ch)250M (1 or 2 ch)
Maximum Duration at Highest Real-Time Sample Rate	25 ms
Time Base Range	250 ps/div to 1000 s/div
Time Resolution (in ET/IT mode)	2.5 ps/div
Time Base Delay Time Range	-5 divisions to 5000 s
Channel-to-Channel Deskew Range	±75 ns
Trigger Jitter (RMS)	≤10 psRMS for Edge trigger type≤100 psRMS for all Non-edge trigger types
Time Base Accuracy	±5 ppm over any ≥1 ms interval

Horizontal System Digital Channels

Characteristic	All MSO5000 Models
Maximum Sample Rate (Main)	500 MS/s (2 ns resolution)
Maximum Record Length (Main)	12.5M Standard Up to 40M with Record Length options
Maximum Sample Rate (MagniVu)	16.5 GS/s (60.6 ps resolution)
Maximum Record Length (MagniVu)	10k points centered around the trigger
Minimum Detectable Pulse Width	1 ns
Channel-to-Channel Skew (typical)	200 ps
Maximum Input Toggle Rate	500 MHz at minimum input swing; higher toggle rates can be achieved at higher amplitudes

Trigger System

Characteristic	Description
Main Trigger Modes	Auto, Normal, and Single
Trigger Coupling	DC, AC, HF Rej (attenuates >50 kHz), LF Rej (attenuates <50 kHz), Noise Reject (reduces sensitivity)
Trigger Holdoff Range	250 ns to 8 s
Trigger Sensitivity
Internal DC Coupled	For 1 MΩ: 1 mV/div to 4.98 mV/div: 0.75 div from DC to 50 MHz, increasing to 1.3 div at instrument bandwidth ≥5 mV/div: 0.40 div from DC to 50 MHz, increasing to 1 div at instrument bandwidth For 50 Ω: 0.40 div from DC to 50 MHz, increasing to 1 div at instrument bandwidth
External (Auxiliary Input)	200 mV from DC to 50 MHz, increasing to 500 mV at 250 MHz
1 MΩ
Trigger Level Range
Any Channel	±8 divisions from center of screen
External (Auxiliary Input)	±8 V
Line	Fixed at about 50% of line voltage

Trigger Modes
Mode

Mode	Description
Edge	Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes DC, AC, HF reject, LF reject, and noise reject
Glitch	Trigger on or reject glitches of positive, negative, or either polarity. Programmable glitch width is 4 ns minimum to 8 s maximum
Runt	Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again
Width	Trigger on width of positive or negative pulse either within or outside of selectable limits (4 ns to 8 s)
Timeout	Trigger on an event which remains high, low, or either, for a specified time period (4 ns to 8 s)
Transition	Trigger on pulse edge rates that are faster or slower than specified. Slope may be positive, negative, or either
Setup/Hold	Trigger on violations of both setup time and hold time between clock and data present on any two input channels
Pattern	Trigger when any logical pattern of signals goes false or stays true for specified period of time (4 ns to 1 s). Pattern (AND, OR, NAND, NOR) specified for all analog and digital input channels defined as High, Low, or Don't Care
State	Any logical pattern of analog channels and digital channels (MSO models) clocked by edge on another channel. Trigger on rising or falling clock edge
Video	Trigger on all lines, specific line number, odd, even, or all fields on NTSC, PAL, SECAM, and HDTV 480p/60, 576p/50, 875i/60, 720p/30, 720p/50, 720p/60, 1080/24sF, 1080i/50, 1080p/25, 1080i/60, 1080p/24, 1080p/25, 1080p/50, 1080p/60, Bi-level, Tri-level
Trigger Sequences	Main, Delayed by Time, Delayed by Events. All sequences can include separate horizontal delay after the trigger event to position the acquisition window in time
A/B Sequence Event Trigger Types	Edge
Trigger Delay by Time	4 ns to 8 s
Trigger Delay by Events	1 to 4,000,000 events
I²C (Optional)	Trigger on Start, Repeated Start, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data on I²C buses up to 10 Mb/s
SPI (Optional)	Trigger on SS or data on SPI buses up to 10 Mb/s
RS-232/422/485/UART (Optional)	Trigger on Start Bit, End of Packet, Data, and Parity Error up to 10 Mb/s

USB (Optional)

Description

Low-speed: Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error. Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside of a range. Frame number can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits. Data Packet Trigger – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data value, or inside or outside of a range. Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL. Special Packet Trigger – Any special type, Reserved. Error Trigger – PID Check, CRC5 or CRC16, Bit Stuffing.

Full-speed: Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error. Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside of a range, Frame number can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits. Data Packet Trigger – Any data type, DATA0, DATA1; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data value, or inside or outside of a range. Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL. Special Packet Trigger – Any special type, PRE, Reserved. Error Trigger – PID Check, CRC5 or CRC16, Bit Stuffing.

High-speed: Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token (Address) Packet, Data Packet, Handshake Packet, Special Packet, Error. Token Packet Trigger – Any token type, SOF, OUT, IN, SETUP; Address can be specified for Any, OUT, IN, and SETUP token types. Address can be further specified to trigger on ≤, <, =, >, ≥, != a particular value, or inside or outside of a range; Frame number can be specified for SOF token using Binary, Hex, Unsigned Decimal, and Don't Care digits. Data Packet Trigger – Any data type, DATA0, DATA1; DATA2, DATAM; Data can be further specified to trigger on ≤, <, =, >, ≥, != a particular data value, or inside our outside of a range. Handshake Packet Trigger – Any handshake type, ACK, NAK, STALL, NYET. Special Packet Trigger – Any special type, ERR, SPLIT, PING, Reserved. SPLIT packet components that can be specified include: Hub Address Start/Complete – Don't Care, Start (SSPLIT), Complete (CSPLIT) Port Address Start and End bits – Don't Care, Control/Bulk/Interrupt (Full-speed Device, Low-speed Device), Isochronous (Data is Middle, Data is End, Data is Start, Data is All) Endpoint Type – Don't Care, Control, Isochronous, Bulk, Interrupt Error Trigger – PID Check, CRC5, CRC16, Any.

Note: High-speed support only available on 1 GHz and 2 GHz models.

Trigger Characteristics

Characteristic	Description
Enhanced Triggering	User-selectable; corrects the difference in timing between the trigger path and the acquired data (not available in FastAcq)

Acquisition Modes

Mode	Description
Sample	Acquire sampled values
Peak Detect	Captures narrow glitches as narrow as 100 ps (2 GHz and 1 GHz models) or 200 ps (500 MHz and 350 MHz models) at all real-time sampling rates
Averaging	From 2 to 10,000 waveforms included in average
Envelope	Min-Max envelope reflecting Peak Detect data over multiple acquisitions
Hi Res	Real-time boxcar averaging reduces random noise and increases resolution
Roll	Scrolls sequential waveform points across the display in a right-to-left rolling motion at sweep speeds slower than 50 ms/div. Up to 20 MS/s with a maximum record length of 10M
FastAcq Acquisition Mode	FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events
Maximum FastAcq Waveform Capture Rate	>250,000 wfms/s on all 4 channels simultaneously
Waveform Database	Accumulate waveform database providing three-dimensional array of amplitude, time, and counts
\(FastFrame^{TM}\ Acquisition\)	Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with each event. Frame finder tool helps to visually identify transients

Search and Mark Events

Characteristic

Description

Automated Search and Mark

Automatically mark events and document waveforms. Search positive/negative slopes or both, glitches, runts, pulse widths, transition rate, setup and hold, timeout, windows, or find any logic or state pattern on any number of channels. Search DDR Read or Write bursts with Opt. DDRA. Event table summarizes all found events. All events are time stamped in reference to trigger position. Stop acquisitions when an event is found

Waveform Measurements

Measurement	Description
Cursors	Waveform and Screen
Automatic Measurements	53, of which 8 can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Width, Negative Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak-to-Peak, Amplitude, High, Low, Maximum, Minimum, Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area
Eye-pattern Measurements	Extinction Ratio (absolute, %, dB), Eye Height, Eye Width, Eye Top, Eye Base, Crossing %, Jitter (p-p, RMS, 6sigma), Noise (p-p, RMS), Signal/Noise Ratio, Cycle Distortion, Q-Factor
Measurement Statistics	Mean, Minimum, Maximum, Standard Deviation
Reference Levels	User-definable reference levels for automatic measurements can be specified in either percent or units
Gating	Isolate the specific occurrence within an acquisition to take measurements on, using either screen or waveform cursors
Waveform Histogram	A waveform histogram provides an array of data values representing the total number of hits inside of a user-defined region of the display. A waveform histogram is both a visual graph of the hit distribution as well as a numeric array of values that can be measured. Sources – Channel 1, Channel 2, Channel 3, Channel 4, Ref 1, Ref 2, Ref 3, Ref 4, Math 1, Math 2, Math 3, Math 4 Types – Vertical, Horizontal
Waveform Histogram Measurements	Waveform Count, Hits in Box, Peak Hits, Median, Maximum, Minimum, Peak-to-Peak, Mean (μ), Standard Deviation (sigma), μ+1sigma, μ+2sigma, μ+3sigma

Waveform Processing/Math

Characteristic	Description
Arithmetic	Add, Subtract, Multiply, Divide waveforms and scalars
Algebraic Expressions	Define extensive algebraic expressions including waveforms, scalars, user-adjustable variables, and results of parametric measurements. Perform math on math using complex equations. e.g. (Integral (CH1 - Mean(CH1)) × 1.414 × VAR1)
Math Functions	Average, Invert, Integrate, Differentiate, Square Root, Exponential, Log10, Log e, Abs, Ceiling, Floor, Min, Max, Sin, Cos, Tan, ASin, ACos, ATan, Sinh, Cosh, Tanh
Relational	Boolean result of comparison >, <, ≥, ≤, ==, !=
Frequency Domain Functions (FFT)	Spectral Magnitude and Phase, Real and Imaginary Spectra
FFT Vertical Units	Magnitude: Linear, dB, dBm
	Phase: Degrees, radians, group delay
	IRE and mV units
FFT Window Functions	Rectangular, Hamming, Hanning, Kaiser-Bessel, Blackman-Harris, Gaussian, Flattop2, Tek Exponential
Waveform Definition	As an arbitrary math expression
Filtering Functions	User-definable filters. Users specify a filter containing the coefficients of the filter. Filter files provided
Mask Function	A function that generates a waveform database bitmap from a sample waveform. Sample count can be defined

Software

Software	Description
NI LabVIEW	A fully interactive measurement software environment optimized for the MSO/DPO5000 Series, enables you to instantly acquire, generate, analyze, compare, import, and save measurement data and signals using an intuitive drag-and-drop user interface that does not require any programming.
SignalExpress Tektronix Edition	Standard MSO/DPO5000 Series support for acquiring, controlling, viewing, and exporting your live signal data is permanently available through the software. The full version (SIGEXPTE) adds additional signal processing, advanced analysis, mixed signal, sweeping, limit testing, and user-defined step capabilities and is available for a 30-day trial period standard with each instrument.
IVI Driver	Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI, Microsoft .NET and MATLAB. IVI-COM standard
LXI Class C Web Interface	Connect to the MSO/DPO5000 Series through a standard web browser by simply entering the oscilloscope's IP address in the address bar of the browser. The web interface enables viewing of instrument status and configuration, as well as status and modification of network settings. All web interaction conforms to LXI Class C specification

Display Characteristics

Characteristic	Description
Display Type	Liquid-crystal active-matrix color display with touch screen
Display Size	Diagonal: 10.4 in. (264 mm)
Display Resolution	1024 horizontal × 768 vertical pixels (XGA)
Waveform Styles	Vectors, Dots, Variable Persistence, Infinite Persistence
Color Palettes	Normal, Green, Gray, Temperature, Spectral, and User Defined
Display Format	YT, XY

Computer System and Peripherals

Characteristic	Description
Operating System	Windows 7 Ultimate 64-bit
CPU	Intel Core 2 Duo, ≥2 GHz processor
PC System Memory	≥4 GB
Hard Disk Drive	Removable hard disk drive, ≥160 GB capacity (2.5 in. SATA)
Mouse	Optical wheel mouse, USB interface
Keyboard	Order 119-7083-xx for small keyboard; USB interface and hub

Input/Output Ports

Port	Description
USB 2.0 High-speed Host Ports	Supports USB mass storage devices, printers, keyboard, and mouse. Two ports on front and four ports on rear of instrument. Can be disabled individually
USB 1.1 Full-speed Device Port	Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB (with a TEK-USB-488 adapter)
LAN Port	RJ-45 connector, supports 10/100/1000BASE-T
Video Out Port	DB-15 female connector, connect to show the oscilloscope display on an external monitor or projector. Support for extended desktop and clone mode
Audio Ports	Miniature phono jacks
Keyboard Port	PS/2 compatible
Mouse Port	PS/2 compatible
Auxiliary Input	Front-panel BNC connector. Input impedance 1 MΩ. Max input 300 VRMS with peaks ≤ ±425 V
Auxiliary Out (Software switchable)	Trigger Out: A TTL compatible pulse when the oscilloscope triggers Time Base Reference Out: A TTL compatible output of internal 10 MHz reference oscillator
External Reference In	Time base system can phase lock to an external 10 MHz reference (10 MHz ±1%)
Probe Compensator Output	Front-panel pins Amplitude: 2.5 V Frequency: 1 kHz

Lan eXtensions for Instrumentation (LXI)

Characteristic	Description
Class	LXI Class C
Version	V1.3

Power Source

Characteristic	Description
Power Source Voltage	100 to 240 V ±10%
Power Source	45 Hz to 66 Hz (85 to 264 V)
Frequency	360 Hz to 440 Hz (100 to 132 V)
Power Consumption	275 W maximum

Physical Characteristics

Dimension	mm	in.
Height	233	9.16
Width	439	17.29
Depth	206	8.12
Weight	kg	lb.
Net	6.7	14.9
Shipping	12.5	27.5
Rackmount Configuration	5U
Cooling Clearance	2 in. (51 mm) required on left side and rear of instrument

Environmental

Characteristic	Description
Temperature
Operating	5 °C to +50 °C
Nonoperating	-20 °C to +60 °C
Humidity
Operating	8% to 90% relative humidity with a maximum wet-bulb temperature of 29 °C at or below +50 °C (upper limit de-rates to 20.6% relative humidity at +50 °C). Noncondensing
Nonoperating	5% to 98% relative humidity with a maximum wet-bulb temperature of 40 °C at or below +60 °C (upper limit de-rates to 29.8% relative humidity at +60 °C). Noncondensing
Altitude
Operating	9,843 ft. (3,000 m)
Nonoperating	30,000 ft. (9,144 m)
Regulatory
Electromagnetic compatibility	2004/108/EC
Certifications	UL61010-1, Second Edition; CSA61010-1 Second Edition, EN61010-1:2001; IEC 61010-1:2001

Ordering Information

MSO/DPO5000 Family

Product	Description
DPO5000 Models
DPO5034	350 MHz, 5 GS/s, 12.5M record length, 4-channel digital phosphor oscilloscope
DPO5054	500 MHz, 5 GS/s, 12.5M record length, 4-channel digital phosphor oscilloscope
DPO5104	1 GHz, 10/5 GS/s (2/4 ch), 12.5M record length, 4-channel digital phosphor oscilloscope
DPO5204	2 GHz, 10/5 GS/s (2/4 ch), 12.5M record length, 4-channel digital phosphor oscilloscope
MSO5000 Models
MSO5034	350 MHz, 5 GS/s, 12.5M record length, 4+16 channel mixed signal oscilloscope
MSO5054	500 MHz, 5 GS/s, 12.5M record length, 4+16 channel mixed signal oscilloscope
MSO5104	1 GHz, 10/5 GS/s (2/4 ch), 12.5M record length, 4+16 channel mixed signal oscilloscope
MSO5204	2 GHz, 10/5 GS/s (2/4 ch), 12.5M record length, 4+16 channel mixed signal oscilloscope

All Models Include: One passive voltage probe per analog channel (TPP0500: 500 MHz, 10X, 3.9 pF for 500 MHz and 350 MHz models; TPP1000: 1 GHz, 10X, 3.9 pF for 2 GHz and 1 GHz models), front cover (200-5130-xx), touch-screen stylus (119-6107-xx), user manual (071-2790-xx), NI LabVIEW SignalExpress Tektronix Edition software, accessory pouch, mouse, Calibration Certificate documenting measurement traceability to National Metrology Institute(s), Z 540-1 Compliance and ISO9001, power cord, one-year warranty.

MSO Models also Include: P6616 16-channel logic probe and a logic probe accessory kit (020-2662-xx).

Note: Please specify power plug and manual language version when ordering.

Options

Record Length Options

Option	MSO5034	MSO5104
	DPO5034	DPO5104
	MSO5054	MSO5204
	DPO5054	DPO5204
Opt. 2RL	25M/Ch	50M max, 25M/Ch
Opt. 5RL	50M/Ch	125M max, 50M/Ch
Opt. 10RL	125M/Ch	250M max, 125M/Ch

Software Options

Option	Description
Opt. DDRA*1	DDR Memory Bus Analysis
Opt. DJA	Jitter and Eye Analysis Tools – Advanced (DPOJET)
Opt. ET3*2	Ethernet Compliance Testing
Opt. LT	Waveform Limit Testing
Opt. MTM	Mask Testing - ITU-T (64 Kb/s to 155 Mb/s) - ANSI T1.102 (1.544 Mb/s to 155 Mb/s) - Ethernet IEEE 802.3, ANSI X3.263 (125 Mb/s to 1.25 Gb/s) - Sonet/SDH (51.84 Mb/s to 622 Mb/s) - Fibre Channel (133 Mb/s to 2.125 Gb/s) - Fibre Channel Electrical (133 Mb/s to 1.06 Gb/s) - USB (12 Mb/s to 480 Mb/s) - IEEE 1394b (491.5 Mb/s to 1.966 Gb/s) - Rapid I/O Serial (up to 1.25 Gb/s) - Rapid I/O LP-LVDS (500 Mb/s to 1 Gb/s) - OIF Standards (1.244 Gb/s) - CPI, V4.0 (1.228 Gb/s) - Video (143.18 Mb/s to 360 Mb/s)
Opt. PWR	Power Measurement and Analysis
Opt. SR-COMP	Computer Serial Triggering and Analysis (RS-232/422/485/UART) Enables triggering on packet-level information on RS-232/422/485/UART buses as well as analytical tools such as digital views of the signal, bus views, and packet decoding. Signal Inputs – Any Ch1 - Ch4 (and any D0 - D15 on MSO models) Recommended Probing – RS-232/UART: Single ended; RS-422/485: Differential
Opt. SR-EMBD	Embedded Serial Triggering and Analysis (I2C, SPI) Enables triggering on packet-level information on I2C and SPI buses as well as analytical tools such as digital views of the signal, bus views, and packet decoding. Signal Inputs – I2C: Any Ch1 - Ch4 (and any D0 - D15 on MSO models); SPI: Any Ch1 - Ch4 (and any D0 - D15 on MSO models) Recommended Probing – I2C, SPI: Single ended
Opt. SR-USB	USB Serial Triggering and Analysis (LS, FS, HS) Enables triggering on packet-level content for low-speed, full-speed, and high-speed USB serial buses. Also enables analytical tools such as digital views of the signal, bus views, and packet decoding for low-speed, full-speed, and high-speed USB serial buses. Signal Inputs – Low-speed and Full-speed: Any Ch1 - Ch4 (and any D0 - D15 on MSO models) for single ended, Any Ch1 - Ch4 for differential; High-speed: Any Ch1 - Ch4 Recommended Probing – Low-speed and Full-speed: Single ended or differential; High-speed: Differential USB high-speed supported only on MSO5204, DPO5204, MSO5104, and DPO5104 models.
Opt. USB*3	USB 2.0 Compliance Testing
Opt. VNM	CAN/LIN Protocol Analysis Software

Option	Description
Bundle Options
Opt. PS1	Power Solution Bundle: DPOPWR, P5205, TCP0030, TPA-BNC, 067-1686-xx (Deskew Fixture)

Floating licenses offer an alternative method to manage your Tektronix asset. Floating licenses allow license-key enabled options to be easily moved among all your MSO/DPO5000, DPO7000, and DPO/DSA/MSO70000 Series of Tektronix oscillosopes. Floating licenses are available for many license-key enabled options. To order a floating version of an option license add "DPOFL-" prefix to the option name. (e.g. DPOFL-ET3) Check www.tek.com/products/oscillosopes/floatinglicenses for additional information about floating license options.

1 Requires Opt. DJA. Available on 1 GHz and 2 GHz models only.
2 Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture.
*3 Requires TDSUSBF (USB Test Fixture). 2 GHz bandwidth required for high-speed USB.

Power Plug Options

Option	Description
Opt. A0	North America
Opt. A1	Universal European Union
Opt. A2	UK
Opt. A3	Australia
Opt. A5	Switzerland
Opt. A6	Japan
Opt. A10	China
Opt. A11	India
Opt. A12	Brazil
Opt. A99	No power cord

User Manual Options

Option	Description
Opt. L0	English manual
Opt. L1	French manual
Opt. L3	German manual
Opt. L5	Japanese manual
Opt. L7	Simplified Chinese manual
Opt. L8	Traditional Chinese manual
Opt. L9	Korean manual
Opt. L10	Russian manual

Service Options*4

Option	Description
Opt. CA1	Provides a single calibration event, or coverage for the designated calibration interval, whichever comes first
Opt. C3	Calibration Service 3 Years
Opt. C5	Calibration Service 5 Years
Opt. D1	Calibration Data Report
Opt. D3	Calibration Data Report 3 Years (with Opt. C3)
Opt. D5	Calibration Data Report 5 Years (with Opt. C5)
Opt. G3	Complete Care 3 Years (includes loaner, scheduled calibration, and more)
Opt. G5	Complete Care 5 Years (includes loaner, scheduled calibration, and more)
Opt. R3	Repair Service 3 Years (including warranty)
Opt. R5	Repair Service 5 Years (including warranty)

*4 Probes and accessories are not included in the oscilloscope warranty. Refer to the data sheet for each probe for its unique warranty and calibration terms.

Recommended Accessories

Probes

Tektronix offers over 100 different probes to meet your application needs. For a comprehensive listing of available probes, please visit wwwTektronix.com/probes.

Probe	Description
TPP0500	500 MHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance
TPP1000	1 GHz, 10X TekVPI passive voltage probe with 3.9 pF input capacitance
TAP2500	2.5 GHz TekVPI active single-ended voltage probe
TAP1500	1.5 GHz TekVPI active single-ended voltage probe
TDP3500	3.5 GHz TekVPI differential voltage probe with ±25 V differential input voltage
TDP1500	1.5 GHz TekVPI differential voltage probe with ±25 V differential input voltage
TDP1000	1 GHz TekVPI differential voltage probe with ±42 V differential input voltage
TDP0500	500 MHz TekVPI differential voltage probe with ±42 V differential input voltage
TCP0150	20 MHz TekVPI 150 Ampere AC/DC current probe
TCP0030	120 MHz TekVPI 30 Ampere AC/DC current probe
P5200	1.3 kV, 25 MHz high-voltage differential probe
P5205*5	1.3 kV, 100 MHz high-voltage differential probe
P5210*5	5.6 kV, 50 MHz high-voltage differential probe
P5100	2.5 kV, 100X high-voltage passive probe

*5 Requires TekVPI® to TekProbe BNC adapter (TPA-BNC).

Accessories

Accessory	Description
077-0076-xx	Service Manual
077-0010-10	Programmer Manual
077-0063-05	Performance Verification and Specifications Manual
SIGEXPTE	NI LabVIEW SignalExpress Tektronix Edition Software (Full Version)
TPA-BNC	TekVPI-to-TekProbe BNC Adapter
TEK-USB-488	GPIB-to-USB Adapter
HCTEK54	Hard Transit Case
RMD5000	Rackmount Kit
119-7083-xx	Mini Keyboard (USB interface)
119-6297-xx	Full-size keyboard with 4-port USB hub
119-7766-xx	External DVD R/W Drive
065-0851-xx	Removable HD Spare with rotational media
K420	Oscilloscope Cart

Cables

Cable	Description
012-0991-xx	GPIB Cable (1 m)
012-0991-xx	GPIB Cable (2 m)

Test Fixtures

Fixture	Description
TDSUSBF	Test fixture for use with Opt. USB
TF-GBE-BTP	Basic test package for 10/100/1000BASE-T Ethernet tests
TF-GBE-ATP	Advanced test package for 10/100/1000BASE-T Ethernet (includes 1000BASE-T jitter test channel cable)
TF-GBE-EE	Additional test fixture for Energy Efficient Ethernet measurements
Ethernet Test Fixture	Order through Crescent Heart Software (http://www.c-h-s.com)

Adapters

Adapter	Description
P6701B*4	Optical/Electrical Converter (Multi Mode)
P6703B*4	Optical/Electrical Converter (Single Mode)

*4 Probes and accessories are not included in the oscilloscope warranty. Refer to the data sheet for each probe for its unique warranty and calibration terms.

Instrument Upgrades

Floating licenses offer an alternative method to manage your Tektronix asset. Floating licenses allow license-key enabled options to be easily moved among all your MSO/DPO5000, DPO7000, and DPO/DSA/MSO70000 Series of Tektronix oscillosopes. Floating licenses are available for many license-key enabled options. To order a floating version of an option license add "DPOFL-" prefix to the option name. (e.g. DPOFL-ET3) Check www tek.com/products/oscillosopes/floatinglicenses for additional information about floating license options.

To upgrade your MSO/DPO5000 Series oscilloscope, order DPO-UP and option listed below. For example, DPO-UP DDRA.

Option	Description
To upgrade record length:
RL02E	From Standard Configuration to Opt. 2RL Configuration
RL05E	From Standard Configuration to Opt. 5RL Configuration
RL010E	From Standard Configuration to Opt. 10RL Configuration
RL25E	From Opt. 2RL Configuration to Opt. 5RL Configuration
RL210E	From Opt. 2RL Configuration to Opt. 10RL Configuration
RL510E	From Opt. 5RL Configuration to Opt. 10RL Configuration
To upgrade MSO/DPO5000 Series with:
DDRA*1	Add Opt. DDRA
DJAE	Add Opt. DJA – Jitter and Eye Analysis Tools - Advanced (DPOJET)
ET3*2	Add Opt. ET3 – Ethernet Compliance Testing
LT	Add Opt. LT – Waveform Limit Testing
MTM	Add Opt. MTM – Mask Testing
PWR	Add Opt. PWR – Power Measurement and Analysis
SR-COMP	Add Opt. SR-COMP – Computer Serial Triggering and Analysis (RS-232/422/485/JUART)
SR-EMBD	Add Opt. SR-EMBD – Embedded Serial Triggering and Analysis (I2C, SPI)
SR-USB	Add Opt. SR-USB – USB Serial Triggering and Analysis (LS, FS, HS)
USB*3	Add Opt. USB – USB Compliance Testing
VNM	Add Opt. VNM – CAN/LIN Serial Protocol Decode
To upgrade DPO5000 Series with:
MSOE	Add 16-digital channels to a DPO5000

1 Requires Opt. DJA. Available on 1 GHz and 2 GHz models only.
2 Requires TF-GBE-BTP or TF-GBE-ATP Ethernet Test Fixture.
*3 Requires TDSUSBF (USB Test Fixture). 2 GHz bandwidth required for high-speed USB.

For Further Information

Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com

Copyright © 2010, Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks or registered trademarks of their respective companies.

20 Oct 2010

48F-26096-0